0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
13 visualizzazioni1 pagina
The document summarizes the dimensions and material properties for designing a concrete pedestal. It lists the bearing dimensions as 800x800mm, the pedestal dimensions as 1100x1100mm with a maximum height of 500mm. The concrete grade is M40. It then calculates the loaded area, maximum design distribution area, and bearing pressure and verifies all are within code limits. In 3 sentences it summarizes the key dimensions, material properties, and confirms the design meets code requirements.
The document summarizes the dimensions and material properties for designing a concrete pedestal. It lists the bearing dimensions as 800x800mm, the pedestal dimensions as 1100x1100mm with a maximum height of 500mm. The concrete grade is M40. It then calculates the loaded area, maximum design distribution area, and bearing pressure and verifies all are within code limits. In 3 sentences it summarizes the key dimensions, material properties, and confirms the design meets code requirements.
The document summarizes the dimensions and material properties for designing a concrete pedestal. It lists the bearing dimensions as 800x800mm, the pedestal dimensions as 1100x1100mm with a maximum height of 500mm. The concrete grade is M40. It then calculates the loaded area, maximum design distribution area, and bearing pressure and verifies all are within code limits. In 3 sentences it summarizes the key dimensions, material properties, and confirms the design meets code requirements.
Dimension of the bearing in the long direction (d1) = 800 mm
Dimension of the bearing in the transverse direction (b1) = 800 mm Dimension of the pedestal in the long direction (b2) = 1100 mm Dimension of the pedestal in the transverse direction (d2) = 1100 mm Maximum height of pedestal provided h = 500 mm Grade of Concrete (fck) = M40
Dispersion slope 1 H 2 V ( As per IRC
SP 105 and Loaded Area Aco = 640000 mm2 IRC 112 : 2011 Dimension of the lower base of the frustum in long direction = 1100 mm Cl. 16.11.1) Dimension of the lower base of the frustum in trans direction = 1100 mm Maximum design distribution area for pedestal Acl = 1210000 mm2 Sqrt(Acl/Aco) = 1.375 <3 Hence Ok
Maxiumum vertical force on bearing = 984 t
Bearing pressure =984x10000/800x800 = 15.38 N/mm2 (Refer Clause <0.45 fck, hence ok 34.4 of IS 456)