Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
PIP PNDMV005
Check Valve Data Sheet and Standard Terms
PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
In an effort to minimize the cost of process industry facilities, this Practice has
been prepared from the technical requirements in the existing standards of major industrial
users, contractors, or standards organizations. By harmonizing these technical requirements
into a single set of Practices, administrative, application, and engineering costs to both the
purchaser and the manufacturer should be reduced. While this Practice is expected to
incorporate the majority of requirements of most users, individual applications may involve
requirements that will be appended to and take precedence over this Practice.
Determinations concerning fitness for purpose and particular matters or application of the
Practice to particular project or engineering situations should not be made solely on
information contained in these materials. The use of trade names from time to time should
not be viewed as an expression of preference but rather recognized as normal usage in the
trade. Other brands having the same specifications are equally correct and may be
substituted for those named. All Practices or guidelines are intended to be consistent with
applicable laws and regulations including OSHA requirements. To the extent these
Practices or guidelines should conflict with OSHA or other applicable laws or regulations,
such laws or regulations must be followed. Consult an appropriate professional before
applying or acting on any material contained in or suggested by the Practice.
© Process Industry Practices (PIP), Construction Industry Institute, The University of Texas
at Austin, 3925 West Braker Lane (R4500), Austin, Texas 78759. PIP Member Companies
and Subscribers may copy this Practice for their internal use. Changes or modifications of any
kind are not permitted within any PIP Practice without the express written authorization of
PIP. Authorized Users may attach addenda or overlays to clearly indicate modifications or
exceptions to specific sections of PIP Practices. Authorized Users may provide their clients,
suppliers and contractors with copies of the Practice solely for Authorized Users’ purposes.
These purposes include but are not limited to the procurement process (e.g., as attachments to
requests for quotation/ purchase orders or requests for proposals/contracts) and preparation
and issue of design engineering deliverables for use on a specific project by Authorized
User’s client. PIP’s copyright notices must be clearly indicated and unequivocally
incorporated in documents where an Authorized User desires to provide any third party with
copies of the Practice.
PRINTING HISTORY
March 2013 Issued
PIP PNDMV005
Check Valve Data Sheet and Standard Terms
Table of Contents
1. Introduction .................................. 2
1.1 Purpose ............................................. 2
1.2 Scope ................................................. 2
2. Requirements ............................... 2
Data Form
PNDMV005-D Check Valve Data Sheet
1. Introduction
1.1 Purpose
This Practice provides a data sheet and standard terms used for specifying check valves.
1.2 Scope
This Practice describes, in table format, the standard terms used in the drop down menus
of the PIP check valve data sheet appended to this Practice.
2. Requirements
Table 1 provides standard terms for specifying the characteristics of a check valve using the
PIP PNDMV005-D Data Sheet. The terms are included in drop down menus for each cell in the
data sheet.
Table 1 – Check Valve Characteristics Standard Terms
Pressure Rating - Class ASME 75 ASME 250 ASME 800 ASME 2500
ASME 125 ASME 300 ASME 900 ASME 4500
ASME 150 ASME 400 ASME 1500 ASME 6000
ASME 200 ASME 600 ASME 2000 Mfg std
Body/Bonnet Material - Alloy 20 Alloy 400 316 SS
Body - Material Bronze CPVC CD4MCuN
Vinyl Ester - PP type 1 CK3MCuN
Graphite Reinforced PVC 1.1/4 Cr 1/2 Mo
Alloy B2 CS 2.1/4 Cr 1 Mo
Alloy C ITCS 5 Cr 1/2 Mo
CI SS 9 Cr 1 Mo
DI 2205 Duplex SS Zirconium
Body/Bonnet Material - A105 A182-F51 A351-CN7M
Body - ASTM Number A126-B A182-F9 A352-LCB
A182-F11-CL-2 A216-WCB A352-LCC
A182-F22-CL-3 A217-C12 A395
A182-F304H A217-C5 A494-CW-12MW
A182-F316/316L A217-WC6 A494-M-35-1
A182-F316 A217-WC9 A494-N-12MV
A182-F316L A276-UNS-S31600 A536-65-45-12
A182-F321 A350-LF2-CL-1 A564
A182-F321H A351-CD4MCu A995-1B
A182-F347 A351-CF3M B335
A182-F347H A351-CF8C B493-UNS-R60702
A182-F44 A351-CF8M B550-UNS-R60702
A182-F5 A351-CK3MCuN D1784-12454
Body/Bonnet Material - Annealed Forged Precipitation
Body - Manufacturing Cast Heat treated hardened
Process Die formed Other
Body/Bonnet Material - Alloy 20 CPVC CK3MCuN
Cover/Bonnet - Material Bronze PP type 1 1.1/4 Cr 1/2 Mo
Vinyl Ester - Graphite PVC 2.1/4 Cr 1 Mo
Reinforced CS 5 Cr 1/2 Mo
Alloy B2 ITCS 9 Cr 1 Mo
Alloy C SS Zirconium
CI 2205 Duplex SS
DI 316 SS
Alloy 400 CD4MCuN
Service
Class/Fluid Type Detailed desc.
Service Temp (Min/Max) °F Pressure (Min/Max) psi
User service names
Cover/Bonnet Remarks
Jacket No. of Connections Trim
Bore Port
Operation Remarks
Lever with counterweight Dampener or snubber
Body-Bonnet Gaskets
Mfg Std Material Form Gasket Standard Remarks
Gasket
OR
Outer Ring Windings Inner Ring Filler 3 Stage Filler - outer / middle / inner
Spiral-wound Type Materials
Body-Bonnet Bolting
Mfg Std Material ASTM Number Remarks
Bolts Type
Nuts
Standards
Design & Rating
Dimension (face to face) Testing
associated Size / Range (Min/Max) Oxygen Cleaned per CGA C-4.1 and G-4.4/ASTM G-93
Alternative Dimension (face to face)
associated Size / Range (Min/Max) Remarks
Additional Information
Face to Face Dimension in Valve Orientation Inclination Angle deg
Centerline to Operator Top ft Dry Weight lb (from horizontal)
Notes