Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
DESCRIPTION:
Omega 57 is a completely water-resistant, extreme-pressure bearing lubricant with mercurial wear-
resistance characteristics. It contains specially-developed high-impact resisting supplements. This
remarkable grease solves wheel bearing problems where heat, water and extreme conditions are
present. The unique Omega Megalite supplements incorporated into Omega 57 ensure longer service
life since equipment on which it is used will operate under considerably cooler conditions, thereby
providing a new dimension in downtime prevention.
FRICTION OF COEFFICIENT:
Omega 57 reduces the friction of coefficient of close tolerances. Irregardless of design, Omega 57
"works" its way into the system to protect the moving surfaces -including expensive bearings.
PRESSURE PERFECT:
Omega 57 is capable of resisting severe and continuous impact. This characteristic of the lubricant
enables it to prevent wear and to allow the bearings to function (as they were designed to function) -
without hindrance.
COHESIVE QUALITIES:
Omega 57 has the ability to resist even the most severe conditions and will not break down or
disintegrate as ordinary greases will. Omega 57 will not alter or soften in wheel-bearing applications
due to its resistance to high temperature.
APPLICATIONS:
Wheel bearing loads are concentrated in small areas. The points of greatest pressure are considered
to be either the cone bearings or ball bearings. Water attack causes the greatest damage. Omega 57
resists water and, as a result, protects bearings from oxidation.
Warning
H319 Causes serious eye irritation.
H412 Harmful to aquatic life with long lasting effects.
All substances in the product are either registrered or exempt from registration under REACH.
SAFETY DATA SHEET
CLP:
%: CAS-No.: EC No.: REACH Reg. No: Chemical name: Hazard classification: Notes:
1-<3 68457-79-4 270-608-0 01-2119493628-22- Phosphorodithioic acid, Skin Irrit. 2;H315
XXXX mixed O,O-bis(iso-Bu and Eye Dam. 1;H318
pentyl) esters, zinc salts Aquatic Chronic 2;H411
<1 - 931-384-6 01-2119493620-38- Reaction products of bis(2- Acute Tox. 4;H302 SCL
XXXX methylpentan-2- Eye Dam. 1;H318
yl)dithiophosphoric acid with Skin Sens. 1;H317
phosphorus oxid, Aquatic Chronic 2;H411
propylenoxide and amines,
C12-14 alkyl (branched)
<1 128-37-0 204-881-4 01-2119565113-46- 2,6-bis(1,1-dimethylethyl)-4- Aquatic Acute 1;H400
XXXX methyl phenol Aquatic Chronic 1;H410
<1 7173-62-8 230-528-9 01-2119487002-46- (Z)-N-9- Met. Corr. 1;H290
XXXX Octadecenylpropane-1,3- Acute Tox. 4;H302
diamine Skin Corr. 1B;H314
Eye Dam. 1;H318
STOT RE 1;H372
Aquatic Acute 1;H400
Aquatic Chronic 1;H410
Notes: SCL: Specific Concentration Limit
DMSO-content < 3%
References: The full text for all hazard statements is displayed in section 16.
Inhalation: Inhalation of oil mist or vapours formed during heating of the product will irritate
the respiratory system and provoke coughing.
Skin contact: Degreasing. Prolonged or frequent contact may cause redness, itching, eczema
and skin cracking.
Eye contact: Direct contact may irritate.
Ingestion: May irritate and cause malaise.
Specific effects: The product contains a small amount of sensitising substance which may
provoke an allergic reaction among sensitive individuals. Prolonged or repeated
contact with used grease may cause serious skin diseases, such as dermatitis.
The harmful effects may increase in used grease.
SAFETY DATA SHEET
2,6-bis(1,1-dimethylethyl)-4-methyl phenol:
M-factor (acute): 1
M-factor (chronic): 1
(Z)-N-9-Octadecenylpropane-1,3-diamine:
M-factor (acute): 10
M-factor (chronic): 1
12.2. Persistence and degradability
Degradability: The product is expected to be slowly biodegradable.
12.3. Bioaccumulative potential
Bioaccumulative potential: No data available on bioaccumulation.
12.4. Mobility in soil
Mobility: No data available.
12.5. Results of PBT and vPvB assessment
PBT/vPvB: No data available.
12.6. Other adverse effects
Other adverse effects: None known.
The Omega Trade Mark is the property of ITW, Inc., and is used under license by ITW PP & F Korea Limited.
Abbreviations and acronyms PBT = Persistent, Bioaccumulative and Toxic.
used in the safety data sheet: vPvB = very Persistent and very Bioaccumulative.
The information on this data sheet represents our current data and is reliable provided that the product is used
under the prescribed conditions and in accordance with the application specified on the packaging and/or in the
technical guidance literature. Any other use of the product which involves using the product in combination with
any other product or any other process is the responsibility of the user.
Made by DHI - Environment and Toxicology, Agern Allé 5, DK-2970 Hørsholm, Denmark.
www.dhigroup.com.