Sei sulla pagina 1di 10

September 1996

BSS100 / BSS123
N-Channel Logic Level Enhancement Mode Field Effect Transistor

General Description Features


These N-Channel logic level enhancement mode power BSS100: 0.22A, 100V. RDS(ON) = 6Ω @ VGS = 10V.
field effect transistors are produced using Fairchild's BSS123: 0.17A, 100V. RDS(ON) = 6Ω @ VGS = 10V
proprietary, high cell density, DMOS technology. This
very high density process has been especially tailored to High density cell design for extremely low RDS(ON).
minimize on-state resistance, provide superior switching
performance. This product is particularly suited to low Voltage controlled small signal switch.
voltage, low current applications, such as small servo Rugged and reliable.
motor controls, power MOSFET gate drivers, and other
switching applications.

_______________________________________________________________________________

G
BSS100

BSS123 S

Absolute Maximum Ratings TA = 25°C unless otherwise noted


Symbol Parameter BSS100 BSS123 Units
VDSS Drain-Source Voltage 100 V
VDGR Drain-Gate Voltage (RGS < 20KΩ) 100 V

VGSS Gate-Source Voltage - Continuous ± 14 V


- Non Repetitive (TP < 50 µS) ± 20

ID Drain Current - Continuous 0.22 0.17 A


- Pulsed 0.9 0.68
PD Total Power Dissipation @ TA = 25°C 0.63 0.36 W
TJ,TSTG Operating and Storage Temperature Range -55 to 150 °C
TL Maximum Lead Temperature for Soldering 300 °C
Purposes, 1/16" from Case for 10 Seconds
THERMAL CHARACTERISTICS
RθJA Thermal Resistacne, Junction-to-Ambient 200 350 °C/W

© 1997 Fairchild Semiconductor Corporation BSS100 Rev. F1 / BSS123 Rev. F1


Electrical Characteristics (T A = 25°C unless otherwise noted)
Symbol Parameter Conditions Type Min Typ Max Units
OFF CHARACTERISTICS
BVDSS Drain-Source Breakdown Voltage VGS = 0 V, ID = 250 µA All 100 V
IDSS Zero Gate Voltage Drain Current VDS = 100 V, VGS = 0 V BSS100 15 µA
VDS = 100 V, VGS = 0 V BSS123 1 µA
o
VDS = 100 V, VGS = 0 V TJ=125 C All 60 µA
VDS = 60 V, VGS = 0 V BSS100 10 nA
VDS = 20 V, VGS = 0 V BSS123 10 nA
IGSSF Gate - Body Leakage, Forward VGS = 20 V, VDS = 0 V BSS100 10 nA
VGS = 20 V, VDS = 0 V BSS123 50 nA
ON CHARACTERISTICS (Note 1)
VGS(th) Gate Threshold Voltage VDS = VGS, ID = 1 mA All 0.8 1.4 2 V
RDS(ON) Static Drain-Source On-Resistance VGS = 10 V, ID = 0.22 A BSS100 2.8 6 Ω
VGS = 10 V, ID = 0.17 A BSS123 2.8 6
VGS = 4.5 V, ID = 0.22 A BSS100 3.2 10
VGS = 4.5 V, ID = 0.17 A BSS123 3.2 10
gFS Forward Transconductance VDS = 10 V, ID = 0.22 A BSS100 0.08 0.4 S
VDS = 10 V, ID = 0.17 A BSS123 0.08 0.4
DYNAMIC CHARACTERISTICS
Ciss Input Capacitance VDS = 25 V, VGS = 0 V, All 29 60 pF
f = 1.0 MHz
Coss Output Capacitance All 10 15 pF
Crss Reverse Transfer Capacitance All 2 6 pF
SWITCHING CHARACTERISTICS (Note 1)
tD(on) Turn - On Delay Time VDD = 30 V, ID = 0.28 A, All 8 ns
tr Turn - On Rise Time VGS = 10 V, RGEN = 50 Ω All 8 ns
tD(off) Turn - Off Delay Time All 13 ns
tf Turn - Off Fall Time All 16 ns
Qg Totall Gate Charge VDS = 10 V, ID = 0.22 A, All 1.4 2 nC
VGS = 10 V,
Qgs Gate-Source Charge All 0.15 0.25 nC
Qgd Gate-Drain Charge All 0.2 0.4 nC
DRAIN-SOURCE DIODE CHARACTERISTICS AND MAXIMUM RATINGS
IS Maximum Continuous Source Current BSS100 0.22 A
BSS123 0.17
ISM Maximum Pulse Source Current (Note 1) BSS100 0.9 A
BSS123 0.68
VSD Drain-Source Diode Forward Voltage VGS = 0 V, IS = 0.44 A BSS100 0.9 1.3 V
VGS = 0 V, IS = 0.34 A BSS123 0.9 1.3
Note:
1. Pulse Test: Pulse Width < 300 µs, Duty Cycle < 2.0%.

BSS100 Rev. F1 / BSS123 Rev. F1


Typical Electrical Characteristics

0 .6 2 .4
V GS = 1 0 V
5 .0 3 .0
0 .5
I D , DRAIN-SOURCE CURRENT (A)

DRAIN-SOURCE ON-RESISTANCE
4 .0 V GS = 2 .5 V
3 .5 2

R DS(on) , NORMALIZED
0 .4

2 .5 3 .0
0 .3 1 .6
3 .5
0 .2 4 .0
5 .0
1 .2
10
0 .1
2 .0

0 0 .8
0 1 2 3 4 5 0 0 .1 0 .2 0 .3 0 .4 0 .5 0 .6
V , DRAIN-SOURCE VOLTAGE (V) I , DRA IN CURRENT (A)
DS D

Figure 1. On-Region Characteristics. Figure 2. On-Resistance Variation with Gate


Voltage and Drain Current.

2 .2 3

2 V GS = 10V
I D = 220m A
DRAIN-SOURCE ON-RESISTANCE

2 .5
DRAIN-SOURCE ON-RESISTANCE

VGS =10V
1 .8 TJ = 1 2 5 ° C
R DS(ON), NORMALIZED

R DS(on) , NORMALIZED

1 .6 2

1 .4
1 .5
1 .2 25°C
1 1
-55°C
0 .8
0 .5
0 .6

0 .4 0
-50 -25 0 25 50 75 100 125 150 0 0 .2 0 .4 0 .6 0 .8 1
TJ , JUNCTION TEM PERA T U RE (°C) ID , DRAIN CURRENT (A)

Figure 3. On-Resistance Variation Figure 4. On-Resistance Variation with Drain


with Temperature. Current and Temperature.

1.2 1 .15
VDS = V GS I D = 250µA
GATE-SOURCE THRESHOLD VOLTAGE

DRAIN-SOURCE BREAKDOWN VOLTAGE

I D = 250µA
1.1 1 .1
BV DSS , NORMALIZED
Vth , NORMALIZED

1 1 .05

0.9 1

0.8 0 .95

0.7 0 .9
-50 -25 0 25 50 75 100 125 150 175 -50 -25 0 25 50 75 100 125 150 175
T J, JU N CTION TEMPERATURE (°C) T J , JUNCTION TEMPERATURE (°C)

Figure 5. Gate Threshold Variation with Figure 6. Breakdown Voltage Variation with
Temperature. Temperature.

BSS100 Rev. F1 / BSS123 Rev. F1


Typical Electrical Characteristics (continued)

80 10

50 I D =220m A
VDS = 5V

VGS , GATE-SOURCE VOLTAGE (V)


C iss
8
20
CAPACITANCE (pF)

20
C oss 6
10

4
5

f = 1 MHz C rss 2
V GS = 0V

1 0
0 .1 0 .2 0 .5 1 2 5 10 50 0 0 .2 0 .4 0 .6 0 .8 1 1 .2 1 .4
V DS , DRAIN TO SOURCE VOLTAGE (V) Q g , GATE CHARGE (nC)

Figure 7. Capacitance Characteristics. Figure 8. Gate Charge Characteristics.

0 .8

VDS = 5V
, TRANSCONDUCTANCE (SIEMENS)

T = -55°C
J
0 .6
25°C

0 .4
125°C

0 .2
FS
g

0
0 0 .1 0 .2 0 .3 0 .4 0 .5 0 .6
I D , DRAIN CURRENT (A)

Figure 9. Transconductance Variation with Drain


Current and Temperature.

VDD t on t off
t d(on) tr t d(off) tf
V IN RL 90% 90%

D V OUT
VOUT
VGS 10% 10%
R GEN DUT INVERTED
G
90%

V IN 50% 50%
S
10%

PULSE W IDTH

Figure 10. Switching Test Circuit. Figure 11. Switching Waveforms.

BSS100 Rev. F1 / BSS123 Rev. F1


2
2
10 10
0u 1 0u
1 s s
it
mi
t 1m 0.5 Lim 1m
0.5 Li ) s
N) s ON

I D , DRAIN CURRENT (A)


S(
I D , DRAIN CURRENT (A)

S(O RD
RD 10
ms 0.2 10
0.2 ms
10 0.1
0.1 0m 10
s 0m
1s 0.05 s
0.05 1s
10 VGS = 20V
VGS = 20V s 10
DC SINGLE PULSE s
SINGLE PULSE DC
TA = 25°C
TA = 25°C 0.01
0.01
0.005
0.005 1 5 10 20 50 100 150
1 5 10 20 50 100 150
VDS , DRAIN-SOURCE VOLTAGE (V)
VDS , DRAIN-SOURCE VOLTAGE (V)

Figure 12. BSS100 Maximum Safe Figure 13. BSS123 Maximum Safe
Operating Area. Operating Area.

1
TRANSIENT THERMAL RESISTANCE

0.5 D = 0.5
r(t), NORMALIZED EFFECTIVE

R θJA (t) = r(t) * R θJA


o
0 .2 R
0.2 θJA = 200 C/ W

0.1
0.1 P(pk)
0.05
0.05 t1
0 .0 2
t2

0.01 TJ - T A = P * RθJA (t)


0.02 Single Pulse
Duty Cycle, D = t1 /t2

0.01
0.0001 0.001 0.01 0.1 1 10 100 300
t 1, TIME (sec)

Figure 14. BSS100 Transient Thermal Response Curve.

1
TRANSIENT THERMAL RESISTANCE

0.5 D = 0.5
r(t), NORMALIZED EFFECTIVE

0.2 0 .2
R θJA (t) = r(t) * R θJA
0.1 o
0.1 R = 347 C/ W
θJA
0.05 0 .05

0 .02 P(pk)

0 .01
0.01 t1
t2
Single Pulse
TJ - T A = P * RθJA (t)

0.002 Duty Cycle, D = t1 /t2

0.001
0.0001 0.001 0.01 0.1 1 10 100 300
t1 , TIME (sec)

Figure 15. BSS123 Transient Thermal Response Curve.

BSS100 Rev. F1 / BSS123 Rev. F1


TO-92 Package Dimensions

TO-92; TO-18 Reverse Lead Form (J35Z Option)


(FS PKG Code 92, 94, 96)

1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 0.22

* * ;

Note: All package 97 or 98 transistors are leadformed


to this configuration prior to bulk shipment. Order
L34Z option if in-line leads are preferred on package
97 or 98.

* Standard Option on 97 & 98 package code

January 2000, Rev. B


SOT-23 Tape and Reel Data and Package Dimensions

SOT-23 Packaging
Configuration: Figure 1.0

Customized Label Packaging Description:


SOT-23 parts are shipped in tape. The carrier tape is
made from a dissipative (carbon filled) polycarbonate
resin. The cover tape is a multilayer film (Heat Activated
Adhesive in nature) primarily composed of polyester film,
adhesive layer, sealant, and anti-static sprayed agent.
These reeled parts in standard option are shipped with
Antistatic Cover Tape 3,000 units per 7" or 177cm diameter reel. The reels are
dark blue in color and is made of polystyrene plastic (anti-
static coated). Other option comes in 10,000 units per 13"
or 330cm diameter reel. This and some other options are
described in the Packaging Information table.
These full reels are individually labeled and placed inside
a standard intermediate made of recyclable corrugated
brown paper with a Fairchil d logo printing. One pizza box
contains eight reels maximum. And these intermediate
boxes are placed inside a labeled shipping box which
comes in different sizes depending on the number of parts
shipped.
Human Readable Embossed
Label Carrier Tape

3P 3P 3P 3P
SOT-23 Packaging Information
Standard
Packaging Option D87Z
(no flow code)
Packaging type TNR TNR SOT-23 Unit Orientation
Qty per Reel/Tube/Bag 3,000 10,000
Reel Size 7" Dia 13"
Box Dimension (mm) 187x107x183 343x343x64
343mm x 342mm x 64mm Human Readable Label
Max qty per Box 24,000 30,000
0.0082 0.0082
Intermediate box for L87Z Option
Weight per unit (gm)
Weight per Reel (kg) 0.1175 0.4006

Note/Comments

Human Readable Label sample

H uman readable
Label
187mm x 107mm x 183mm
SOT-23 Tape Leader and Trailer Intermediate Box for Standard Option
Configuration: Figure 2.0

Carrier Tape

Cover Tape
Components
Trailer Tape Leader Tape
300mm minimum or 500mm minimum or
75 empty poc kets 125 empty pockets

September 1999, Rev. C


SOT-23 Tape and Reel Data and Package Dimensions, continued

SOT-23 Embossed Carrier Tape


Configuration: Figure 3.0
P0 P2 D0 D1
T

E1

F W
E2
B0 Wc

Tc A0
P1
K0
User Direction of Feed

Dimensions are in millimeter

Pkg type A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc

SOT-23 3.15 2.77 8.0 1.55 1.125 1.75 6.25 3.50 4.0 4.0 1.30 0.228 5.2 0.06
(8mm) +/-0.10 +/-0.10 +/-0.3 +/-0.05 +/-0.125 +/-0.10 min +/-0.05 +/-0.1 +/-0.1 +/-0.10 +/-0.013 +/-0.3 +/-0.02

Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C). 0.5mm
20 deg maximum maximum

Typical
component
cavity 0.5mm
B0 center line maximum

20 deg maximum component rotation

Typical
Sketch A (Side or Front Sectional View) component Sketch C (Top View)
A0 center line
Component Rotation Component lateral movement
Sketch B (Top View)
SOT-23 Reel Configuration: Figure 4.0 Component Rotation

W1 Measured at Hub

Dim A
Max

Dim A See detail AA


max Dim N

7" Diameter Option


B Min

Dim C

See detail AA
Dim D
W3 min

13" Diameter Option W2 max Measured at Hub

DETAIL AA

Dimensions are in inches and millimeters

Reel
Tape Size Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL)
Option
7.00 0.059 512 +0.020/-0.008 0.795 2.165 0.331 +0.059/-0.000 0.567 0.311 – 0.429
8mm 7" Dia
177.8 1.5 13 +0.5/-0.2 20.2 55 8.4 +1.5/0 14.4 7.9 – 10.9

13.00 0.059 512 +0.020/-0.008 0.795 4.00 0.331 +0.059/-0.000 0.567 0.311 – 0.429
8mm 13" Dia
330 1.5 13 +0.5/-0.2 20.2 100 8.4 +1.5/0 14.4 7.9 – 10.9

September 1999, Rev. C


SOT-23 Tape and Reel Data and Package Dimensions, continued

SOT-23 (FS PKG Code 49)

1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 0.0082

September 1998, Rev. A1


TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.

ACEx™ ISOPLANAR™ SyncFET™


CoolFET™ MICROWIRE™ TinyLogic™
CROSSVOLT™ POP™ UHC™
E2CMOSTM PowerTrench  VCX™
FACT™ QFET™
FACT Quiet Series™ QS™
FAST® Quiet Series™
FASTr™ SuperSOT™-3
GTO™ SuperSOT™-6
HiSeC™ SuperSOT™-8
DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER


NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant into support device or system whose failure to perform can
the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life
failure to perform when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can be effectiveness.
reasonably expected to result in significant injury to the
user.

PRODUCT STATUS DEFINITIONS

Definition of Terms

Datasheet Identification Product Status Definition

Advance Information Formative or This datasheet contains the design specifications for
In Design product development. Specifications may change in
any manner without notice.

Preliminary First Production This datasheet contains preliminary data, and


supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.

No Identification Needed Full Production This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.

Obsolete Not In Production This datasheet contains specifications on a product


that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.

Rev. D

Potrebbero piacerti anche