Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Timer Controls
DT17 Digital Timer Installation and 1 Display - LCD display Daylight Savings Time TH
Operating Instructions (reset display shown). In Off, Auto, or On mode, AM
Thank you for purchasing the 2 On light - red LED is push and hold DS for a
DT17 Digital Timer. lit when the DT17 is in
operation. couple of seconds to switch On
Features of this timer include 3 RESET button - daylight savings time on or
push the RESET off. The daylight savings (S)
button with a ball point symbol switches on or off and the time switches one hour
Features pen to clear all in the appropriate direction.
• Automatic or manual operation. Push programming and the
ON/OFF to switch the plugged in clock.
light(s) on or off any time. 4 TIME SET button -
• Program up to 14 on/off time pairs per day push and hold to set
(maximum 98 automatic switch settings). the clock.
• Minimum setting interval 1 minute. 5 ON/OFF button - push and release to manually Setting The Clock
• A setting can be for a particular day of the week, switch on or off at any time.
every day, only weekdays, only weekends, or every 6 Day button - use during time set to set the day of
WE
day but Sunday. the week. Use during programming to set individual PM
• Random feature adjusts the ON/OFF times within 15 days, weekdays, weekends or the entire week.
minutes of each programmed setting. 7 HOUR button - use during time set or programming Off
• Batteries (replaceable) save the time and program to set the hour.
settings when the unit is unplugged or there is a 8 MIN button - use during time set or programming to
set the minute. 1
power outage. 1 4 2
Please read the instructions before programming your 9 DS button - push and hold for a couple of seconds
timer. to switch to or from daylight savings time.
10 PROG button - push and release to set or change
programmed on and off times. How to set the clock:
11 MODE button - push and release to choose ON/
Off, Auto, Random or Countdown timer modes. 1. The mode must be
Battery Installation On, Auto, or Off.
Using a small flat screwdriver or coin, MO TU WE TH FR SA SU 2. If it is daylight savings time, push and hold DS for a
pry the battery Model DT17
7-DAY
DIGITAL PROGRAMMABLE
couple of seconds so the daylight savings symbol
PLUG-IN LAMP AND APPLIANCE TIMER
Displays 1
holder open. Position the 2 batteries, 3 4
15 Amp. Resitive and Inductive 500 Watts
Tungsten 1/3 H.P. 120 Volts 60 Hz.
INTERMATIC INCORPORATED
appears.
SPRING GROVE, ILLINOIS 60081
MANUFACTURED IN CHINA