Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Check fuel level, Drain the water and the sediment from the fuel pre-filter √ √ √ √ √
Check the lubrication at all lubrication points, apply grease to them according to the Machine Lubricating Figure attached on the machine √ √ √ √ √
Walk around and visually inspect all the systems weather there are abnormal or leakage √ √ √ √ √
Apply grease to every driveshaft according to the Machine Lubricating Figure attached on the machine √ √ √ √ √
Initial
Check the clearance between the parking brake shoe and brake drum at the first 50 service hours, make adjustment if necessary Check
√ √ √ √
Initial
Check the tightening torque of rims connecting bolts at the first 50 service hours Check
√ √ √ √
Initial
Initially replace the engine oil and oil filter (the first 50 service hours) Replacemen
t Initial
Initially replace the powertrain filter and the oil for the transmission, torque converter and radiator Replacemen
t
Initial
Initially replace the hydraulic tank return element (upper element on the oil tank) Replacemen
Initialt
Initially replace pilot hydraulic system oil filter element Replacemen Clean
t
1/3
Maintenance Schedule
Check the tightening torque of the engine and transmission mounting bolts √ √ √ √
Check work tool, front and rear frames, stress welding seams, and retaining bolts for cracks or loose √ √ √ √
Check the engine drive belt, air conditioning compressor belt for tension and damage √ √ √ √
Check the bearings of the engine tension pulley and the fan shaft bearing case √ √
Fasten all the retaining bolts of the battery, clean the top of the battery √ √
Replace the oil for the transmission, torque converter and radiator √ √
Replace the hydraulic tank return element (upper element on the oil tank) √ √
Clean the seals and springs of brake booster, replace the brake oil, check the sensitivity of each brake √
Check the sealing of distribution valve and power cylinder by measuring the cylinder natural subsidence √
Change coolant and coolant filter, Clean cooling system Replace the coolant every two years if the service hours do not occur first √
Replace hydraulic oil, clean hydraulic tank and check the suction pipe √
3/3