Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Supply voltage
Load voltage L+
● Rated value (DC) 24 V
● Reverse polarity protection Yes
Input current
from load voltage L+ (without load), max. 30 mA
from backplane bus 5 V DC, max. 50 mA
Power loss
Power loss, typ. 1 W
Analog inputs
Number of analog inputs 8
● For resistance measurement 4
permissible input voltage for voltage input 20 V; continuous; 75 V for max. 1 s (mark to space ratio 1:20)
(destruction limit), max.
permissible input current for current input (destruction 40 mA
limit), max.
Encoder
Connection of signal encoders
● for current measurement as 2-wire transducer Yes
● for current measurement as 4-wire transducer Yes
● for resistance measurement with two-wire Yes
connection
● for resistance measurement with three-wire Yes
connection
● for resistance measurement with four-wire Yes
connection
Errors/accuracies
Operational error limit in overall temperature range
● Voltage, relative to input range, (+/-) 1 %; ±1% (80 mV); ±0.6% (250 mV to 1 000 mV); ±0.8% (2.5 V to
10 V)
● Current, relative to input range, (+/-) 0.7 %; From 3.2 to 20 mA
● Resistance, relative to input range, (+/-) 0.7 %; 150, 300, 600 Ohm
● Resistance thermometer, relative to input 0.7 %; ±0.7 % (Pt100/ Ni100); ±0.8 % (Pt100 climate)
range, (+/-)
Basic error limit (operational limit at 25 °C)
● Voltage, relative to input range, (+/-) 0.6 %; ±0.4 % (250 mV to 1 000 mV); ±0.6 % (2.5 mV to 10 mV);
±0.7 % (80 mV)
● Current, relative to input range, (+/-) 0.5 %; 3.2 to 20 mA
● Resistance, relative to input range, (+/-) 0.5 %; 150, 300, 600 Ohm
Interrupts/diagnostics/status information
Diagnostics function Yes; Parameterizable
Alarms
● Diagnostic alarm Yes; Parameterizable, channels 0 and 2
● Limit value alarm Yes; Parameterizable
Diagnostic messages
● Diagnostic information readable Yes
Diagnostics indication LED
● Group error SF (red) Yes
Potential separation
Potential separation analog inputs
● between the channels and backplane bus Yes
Isolation
Isolation tested with 500 V DC
Connection method
required front connector 20-pin
Dimensions
Width 40 mm
Height 125 mm
Depth 117 mm
Weights
Weight, approx. 250 g