Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
BYJU'S
Mcq: Slope and Deflection
Deflection under the load in a S.S.Beam with ‘W’ not at the center will be
(a) 4Wa2b2/3 EIL
(b) 2Wa2b2/3 EIL
(c) Wa2b2/3 EIL
(d) None
(Ans:c)
Distance of maximum deflection from the center in a S.S.Beam with ‘W’ not at the center will be
(a) [2 (L2—b2)/3]0.5
(b) [(L2—b2)/3]0.5
(c) [(3L2—b2)/3]0.5
(d) None
(Ans:b)
Maximum slope in a cantilever beam with a moment M at the free end will be
(a) 3ML/EI
(b) 2ML/EI
(c) ML/EI
(d) None Search here..
(Ans: c)
Maximum deflection in a cantilever beam with a moment M at the free end will be
(a) 3M2L/2EI CATEGORIES
(b) 2M2L/2EI
(c) M2L/2EI
Select Category
(d) None
(Ans: c)
Which bracket is used in Macaulay’s Method of slope and deflection RECENT POSTS
(a) Parentheses ( )
(b) square brackets [ ] PROJECTION OF POINTS-Short Question Answers
(c) braces { }
Del operator-Laplacian operator-Divergence
(d) None
(Ans: b) mcqs – Shear stresses in beams
Difference in slopes between two points A and B by the moment area method is given by SUMMARY OF AIR CONDITIONING
(a) Area of BMD between A and B/2EI
(b) Area of BMD between A and B/3EI Psychrometric chart
(c) Area of BMD between A and B/EI
(d) None
ARCHIVES
(Ans:c)
Difference in deflections between two points A and B by the moment area method is given by Select Month
(a) (Area of BMD between A and B) . XB/2EI
(b) (Area of BMD between A and B) . XB /3EI
(c) (Area of BMD between A and B) . XB /EI
(d) None
(Ans:c)
Deflection under a concentrated load not at the center (distance a from left support and distance b from right hand support)
will be
(a) WL3/48EI
(b) 5WL3/384EI
(d) None
(Ans:c)
(d) None
(Ans:a)
(d) None
(Ans:c)
Which one method is the best for finding slope and deflection
(a) Double integration method
(b) Macaulay ’s method
(c) Strain energy method
(d) None
(Ans: b)
SPONSORED SEARCHES
Maximum deflection in a S.S. beam with UDL ‘w’ over the entire span will be
(a) At the left hand support
(b) At the Right support
(c) At the center
(d) None
(Ans:c)
Maximum slope in a S.S. beam with UDL ‘w’ over the entire span will be
(a) At the supports
(b) At the center
(c) In between the support and the center
(d) None
(Ans:a)
Maximum slope in a S.S. beam with UDL ‘w’ over the entire span will be
(a) wL3/16EI
(b) wL3/24EI
(c) wL3/48EI
(d) None
(Ans:b)
Maximum deflection in a cantilever beam with with UDL ‘w’ over the entire length will be
(a) At the free end
(b) At the fixed end
(c) At the center
(d) None
(Ans:a)
Maximum slope in a cantilever beam with with UDL ‘w’ over the entire length will be
(a) At the free end
(b) At the center
(c) At the fixed end
(d) None
(Ans:a)
Maximum slope in a cantilever beam with with UDL ‘w’ over the entire length will be
(a) wL3/9EI
(b) wL3/6EI
(c) wL3/3EI
(d) None
(Ans:b)
Share this:
SPONSORED SEARCHES
Related