Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
DEBASISH GHOSH
S/O—BENI MADHAB GHOSH (Govt.POST MASTER) PS—BELONIA .VILL+PO—KRISHNANAGAR.
DIST — SOUTH TRIPURA.STATE — TRIPURA , PIN—799156 (INDIA)
Mob-- ® 0091-8415810795, E-Mail- debasishghosh_1984@yahoo.com
Career Objective - To pursure a challenging carrier with a significant role in a dynamic and progressive organization
contributing towards the growth of company and myself, using my analytical, technical, skills and leadership qualities.
Position Applied–Inspection Engineer, Mechanical Inspector/Co-Ordinator, QA/QC
TOTALWORK EXPERIENCE 12+YEARS (Gulf- 8 years 10 Month India -3 years 2 month)
Career Profile-Summary
Duration
Name of organization Designation
From To
Toshiba plant services system
Jan 2018 July 2019 Inspection Engineer
,Durgapur, Kolkata
VELOSI inspection services KUWAIT
Nov 2015 Dec 2017 Inspection Engineer
M/s Thermax power Division
Pune ,INDIA(power plant project) Mar 2014 Oct 2015 QA/QC Welding & Painting inspector
2) From Nov 2015 to Dec 2017Name of Company – VELOSI INSPECTION SERVICES KUWAIT
• --Carryout Vendor inspection,Read project specifications and making familiar with project quality requirements.
Checking Product identification, Packing condition, Documentation and verifying Delivery Notes Material Batch
Certificates.
• Conducting DSS, SDSS Materials inspection and fabrication in fabrication yard shop floor.
• Visual Check on Storage Condition, Storage area, for adequate storage area and verify no Damage to painted items.
Monitoring, inspection, witness and QC report generation as required.
• Making arrangements for necessary Material Verification & Traceability, of painting/coating materials and
availability of Batch and test certificates.
• Coordinating with Contractors representative, painting/coating inspectors.
My major role in this project is,
1. Review project specification,
2. Review inspection test plan,
3. Conduct material inspection,
4. Conducting FAT inspection,with project team and identifying punch points and ensuring final closeout.
5. Review and witnessed the PQR, WPS, WQT,
6. Carried out final inspection as per code standard (Welding, piping, painting).
7. Field inspection coordination with client and project consultant,
8. Attend weekly QAQC and construction meeting.
9. Witnessed the Hydrostatic test on each water filled check the settlement if any (on going)
10. Final inspection attend pre inspection meeting. Communicate and preparation -IRN, ITR, IRC.
11. Implement QA/QC activities including those of sub contractors, workshop in accordance with ITPs and quality
procedures, method of statements and other contract documents.
12. Preparation and sign off applicable records for quality surveillances/inspections /tests.
13. Maintain records of calibration inspection and testing equipments.
14. Prepared daily and weekly report and fabrication status and send to my superior.
15) Involvement in welding of CS, LTCS, SS, DSS, SDSS and CRA materials.
16) Visual Inspection of material, welding joints and dimensional accuracy of element during fabrication.
17) Witness review of NDE, pressure test and metallurgical test and report.
18) Review of manufacturing record book and issue for Inspection release Note.
19) Review of test pack and witness of hydro/pneumatic test.
20) Witness of corrosion test ASTM, G48, G28, IGC for DSS, SDSS, CRA SS materials respectively for material and
welding procedure qualification.
-- Very well Experience in 3 LPP coating on DSS pipe as per ISO 21809- 1 with PDO Project Name -SNDC and KDC
--Inspection of Thermal Spray coating of aluminums and zincaluminium alloy materials.
--Carried out all inspection activity as per code standard and procedure OR as per ITP.
--Carried out all fabrication inspection activities fabrication Yard area.
--Carried out TSA coating inspection as per the procedure.
--Inspection carried out drill pipe oil and gas distribution/shutdown and well experience in pipe line/pipe
manufactures.
• Job Includes Inspection of Trenching, Stringing, Laying, Welding, Joint Coating, Radiography Test of various sizes
pipe lines,HDD of canal and river crossing, Cased..
• Verification and approval of WPS&PQR and Welder Qualification as per API 1104 & ASME-Sec-IX & Electrode
Qualification as per ASME-Sec II –Part C.
• Handled QC, which includes establish, document, implement, and monitor quality procedures.
• Inspection of Pressure vessel, Heat Exchangers, Casting & Forgings , structural items Inspection includes Material
Identification, Fabrication to finished weldment, Reviewing/Witness of various Items.
• Coordinate with the Procurement Group and kick-off and pre-inspection meetings with vendors and to ensure
inspection requirements are being met and communicate.
• Conduct pre-inspection meetings with vendors for critical equipment like as pressure parts.
• Conduct vendor shop inspections and support Quality maintain and implementation.
• Inspection of LSAW pipe at Pipe mill (Kuwait saw pipe) as per API 5L Code & Customer Specification.
• Verification of documents, review of material test certificates for plates, filler materials, flex, electrodes,
witnessing of welder qualification tests, manufacturing procedure qualification tests, procedure qualification tests
as per the clients requirements. Monitoring of welding parameters, Review of all NDT reports, witnessing of plate UT,
Final UT, hydro test witnessing as per clients requirements.Interpretation of Radiographic Films as per API 5L and
Client Specification & Witnessing Mechanical Testing for lot samples as per APL 5L and clients requirements. •
Visual Inspection of Weld Joints, Dimensional inspection of pipes as the clients requirements and API 5L
specification. Issuing of Release note &Inspection Report on behalf of petrofac Engineering & koc
• Verification of insulation materials such as Poly Isocynurate (PIR), Polyurethane foam (PUF), Foam glass, Glass
wool, Rock wool boards, Reinforcement cloth, Filament tape, Butyl rubber, Stainless steel bands, Clips, Rivets,
Cladding sheets, Primary & secondary.
• Inspection of FBE coating of pipes Review of raw material test certificates, Monitoring of coating parameters,
Inspection of blasting, thickness checking, witnessing holiday testing.Witnessing Lab Testing, Issue of release notes.
• Surveillance during installation of cold and hot insulation (i.e. application of PIR / PUF / Foam glass / Rock wool /
Glass wool, Securement, Vapor barriers, Weather protection, etc).
• Record non-conformances & report to the relevant authorities.
• Review & endorsement of inspection reports.
• Conduct inspection activity --Cladding,Insulation and sealing Pressure Vessel manufacturing shop and site as per
code and standard.
• Carried out Concrete Weight Coating (CWC) and verify the materials.
• Conduct inspection activity--Cladding, Insulation and sealing Pressure Vessel manufacturing shop and site as per
code and standard.
• Carried out 3LPE 3 Layer Polyethylene Coating (3LPE) - Pipe Coating, Holiday test, and adhesive peel strength test.
• providing technical explanation of site quality control requirements to customer/contractors, technical expertise
to consult and finalize if any quality issue/concerns in the plant and field.
• Familiar with PIM, IRN, SRN.
• Skid, tank and pre assembly inspection; Visual inspection of orbital tube welds with use ... Inspect welds, paint,
and mechanical work that is performed on rail cars.
• Carry out Receiving Inspections of Columns, Reactors, Drums, Filters, Heat
Exchangers, Compressors, Pumps, Turbines, Furnace, Boilers, Electrostatic precipitator (ESP) and Skid mounted
packages.
• Strict Implementation of Preservation activities at Site and at Material storage area.
3) From March 2014 to Oct 2015 Name of Company – M/s Thermax power Division,
Pune, INDIA (Agartala Extension power plant project)
• Review of QAP / ITP and Inspection follow up as per FQP/ITP
• Coordinate quality inspections with all the site sub-contractors and vendors
• Coordinate with the customers representative on all quality matters
• Coordinate all receipt inspections
• Distribute relevant QA/QC documentation to site subcontractors
• Verify that the quality related site activities are in accordance with the applicable codes and standards
• Participate in the site internal and external site audits
• Coordinate all the quality site inspections through the site QC inspectors
• Ensure all quality control documentation is compiled and competed
• Control all nonconformance reports and undertake remedial action
• Compete site quality control instructions and action remedial responses
• Review the customers specification
• Monitor the implementation of the approved site QC Plan
• Complete and coordinate the approval of the site's QC technical submitting to the customer
• Coordinate with the site construction manager on all quality issues
• Coordinate and chair the QA/QC site weekly meetings with the projects subcontractor's QC personnel
• Elaborating inspection and test programs
• Ensure the safety is adhered to at site
• Assure all technical documents relative to site quality control are current status.
• Carryout inspection, job packs, drawings, specifications, inspection plans and repair plans prior to inspection.
• Carry out weld visual, fit-up inspection; pipe laying, support installation, welding, and hydrotest.Assess equipment
condition and report with repair recommendation based on code and procedural requirements.
• Carryout piping walk down/line installation inspection/prepare punch list /testing/insulation coating/painting
works.
• To report any defects and non-compliance activities based on code and standard.
• Preparation of WPS and WQT & carry out welding activities.
• Attend the mom and discuse progress report and daily activity as per plan
• Well verse to demonstrate competence to set up NDT equipment and carryout NDT techniques in accordance with
the NDT instruction and under the supervision of the refinery inspector.
• Coordinate with the NDT coordinator and NDT technicians to get the NDT status.
• Carry out welding inspection and Review the NDT reports and findings and field verify as.
• Cary out coating inspection, as per the procedure or code as per plan.
• Shall be capable of making decisions on repairs as per code requirements and handle NDT Techs working under
him and able to guide them during the inspection activities.
• Reviewing daily coating reports, Holiday detection report, Adhesion test report etc.
• Inspecting & ensuring the proper way of abrasive and coating material storage & usage.
• Familiar with the methods & usage of testing instruments such as Testex surface profile gauge with Testex tape,
limpet gauge, hypodermic needle gauge, WFT & DFT gauge= (comb gauge & banana gauge) and holiday detector etc.
• Review of client's specification, purchase orders, work procedures, inspection plans & implementing in the
inspection processes.
• Ensuring surface preparation complies with visual standard and coating complies with the project specification.
4) From Dec 2013 to Feb 2014 Name of Company – M/s Madina Group of company QATAR ,DOHA.
• Report to site QC Manager/operation manager.
• Inspection for Internal component installations is as per drawing.
• The stage wise inspection for fabrication activities, fit-up, Weld visual inspection as per
General arrangement drawing (GAD)
• Attend the meeting talk to client & customer solution the problem as per the requirement. Directly responsible for
performing this activity. Prepare inspection reports, Perform visual and dimensional inspection of materials before
fit-up and welding.
DEMOSTRATED EXPERTISE IN OFFSHORE:
Inspection of Pipe joints, Structural joint, HP & LP Line, skid connection.
• Carry out daily activity, and all welding & painting, drum inspection activity as per the procedure.
• Package preparation and done the activity as per the FQP.inspection carryout shop fabrication and prepare work
pack for offshore work.
• Carryout daily activity status & planning to daily inspection update and completion. Responsible for stage wise
painting / coating inspection.
• Check Surface preparation, DFT, as per the requirement.
• Follow the FQP as per the client requirement/specification.
• Perform NDT test as per the requirement.
• Perform appropriate review of Welding procedure, WPS/PQR and WPQ check of third party
contractors/Fabricators as per ASME IX, API1104 AND AWS (Welding Electrodes).
• Interface with maintenance and operation on a daily basis to ensure all required inspection work is completed per
recommendation and consistent with company and industry standards.
• Perform proper NDE method on finished weld on steel fabrication and piping, pipeline tie-in and insulation,
existing gas plant installation.
• Executed technical inspections in the production process of the product in the context of the authorization of
manufacturer operation.
• Prepared visual incoming first article and final inspections.Verified compliance to customer drawings specs and
additional requirements
• Compiled all technical data of non-conformance in order to launch SAP-based quality discrepancy sheets for
professional assessment in accordance to the manufacturing engineering documentation.
• Carried out and documented first piece in process and final inspections; etermined and reported and non-
conformances. Maintained all necessary quality records and documents.
Software Skills - Windows, Ms Office, Microsoft Word, Microsoft Excel, internet suffering.
Personal details
Declaration
I here by declare information is correct and true to the best of my knowledge.It I were places in your
esteemed concern.I will discharge my duties with at most sincerity and to your ful satisfaction.
(DEBASISH GHOSH)