Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Look for the spot that you can see all the corner as your reference
1 point.
First level na tripod or the legs of the total station. Make sure that
2 you are comfortable with its height if not, reduce it.
Put the total station at the top of the tripod. Place it at the center
3 then use the bubble on the base of the total station as the
reference to level it. The bubble must be at the center of the circle.
Click "Menu" -> "F1: Collect Data" -> "File Name" -> Enter
5
Note: F1 (Erase)
"F1" PCODE: T1
7
I.HT: "Enter the height of the Total Station from the ground floor to
the middle of the body of the total station"
N 20000
8
E 20000
Z 100
PT#1
PT#2
Repeat Step no. 10 and so on. Just change the PCODE from 1 to any
12 number that you may need until last point.
13 "Finish"
1 Click "Menu"
Search for the data that you saved from the memory of the total
5 station. Look for the "PTS" format.
1 Click "Menu"
Search for the data that you saved from the memory of the total
4 station. Then "ENT"
Click "F1: FISRT DATA" to view the points that you created. (Scrool
5 Down/Up)
TO VIEW AREA
1 Click "Menu"
3 Click "F1:FILE"
8
Click "FILE" -> "SAVE AS" to save your file and save it as "CSV"
9 Format to make your file into an excel format.
11 Click "Transform"
15 Click "Transform"
*On Cadd* To see all plotted points Type "Z" for Zoom -> "E" for
18 Extent"
To make the points visible Type "PDMODE" -> "2" for the size of the
19 points.
20 Then connect all the points to see the actual lot plan.
21
CHECK