STATUS OF LABORATORY EQUIPMENT FOR DBM AS AT 27TH NOVEMBER 2018
Appendix Description Quantity Remarks
No. A105/2.04 Electric vibrating Kango Hammer fitted with 1 No. Received steel tamper (BS 1377) with support frame A105/2.05 Straight edge 300 mm long with handles 6 No. Received A105/2.13 Thermostatically controlled electric oven 105- 2 No. Received 110° C. capacity 0.225 m3 A105/4.01 Nuclear moisture/density gauge (Troxler 1 No. With 3411B or similar approved) Contractor. No storage. A105/4.02 Hole forming device (drill rod) 3 No. With Contractor A105/4.03 Guide for above 3 No. With Contractor A105/6.01 Wire mesh basket with apertures not greater 1 No. Received than 6.5 mm large enough to contain 2.5 kg of aggregate A105/6.02 A stout watertight container in which the 1 No. Received basket can be freely suspended A105/6.03 Soft absorbent cloth (tea towel) 40 No. Received A105/6.04 Shallow tray of area not less than 0.065 m2 2 No. Received A105/6.06 Pycnometer of 1 litre capacity 1 No. Received A105/6.07 Semi-automatic 5 kg balance accurate to 0.1 g 1 No. Received to be of size and type to permit the basket containing the sample to be suspended in water (to be supplied with weights) A105/6.08 Warm air drier (Electric) 2 No. Received A105/8.01 BS Sieve 300 mm diameter in sizes 75, 63, 2 No. Received 50, 37.5, 28, 20, 14, 10, 6.3, 5 and 4 mm, plus lid and receiver A105/9.50 Portable dial thermometer +50° C to +250° C 3 No. Received accurate to ±3% A105/9.52 Pocket thermometer +50° C to +250° C 2 No. Received accurate to ±3% with 0.1 m ste, A105/9.54 Hotplate 200 mm diameter with Simmerstat 2 No. Received heat control unit A105/13.03 Aggregate Crushing Value Apparatus, 130 1 No. Received mm nominal diameter, including plunger and base plate A105/13.04 Tamping rod and metal measure for the above 2 No. Received A105/13.05 Los Angeles Abrasion Machine to ASTM 1 No. Received standards A105/13.06 Set of two abrasive charges 1 No. Received A105/13.10 Aggregate Crushing Value apparatus, 150 1 No. Received mm nominal diameter, including plunger and base plate STATUS OF LABORATORY EQUIPMENT FOR DBM AS AT 27TH NOVEMBER 2018
Appendix Description Quantity Remarks
No. A105/13.11 Tamping rod and metal measure for above 1 No. Received (BS 812) A105/15.01 Petrol driven 100 mm diameter core cutter 1 No. Received with all accessories and one spare kit A105/15.02 Specimen mould, base plate and extension 8 No. Received collar A105/15.03 Specimen extractor 2 No. Received A105/15.06 Breaking head mould 1 No. Received A105/15.07 Electrical 30 kN Marshall compression testing 1 No. Received machine A105/15.09 Proving ring 28 kN capacity graduated in 1 No. Received 0.0025 mm A105/15.10 Flow meter 2 No. Received A105/16.13 Filter funnel to take 200 mm nominal 2 No. Received diameter sieves A105/16.14 Centrifuge complying with BS 598 1 No. Received A105/16.21 PRD Vibrating hammer compactor complete 1 No. Received (b) with 6 moulds, 7 base plates from ELE A105/17.11 Trychloroethylene 1000 kg Received
A105/6.06 Pycnmoteter of 1 litre capacity 3 No. Not Received
A105/10.06 BS 1924 1 No. Not Received A105/10.11 BS 5911 Part 1 & 3 1 No. Not Received A105/10.13 EN 12591:2009 (E) 1 No. Not Received A105/10.14 BS 5896 1 No. Not Received A105/10.15 BS 1366 1 No. Not Received A105/10.16 BS 3692 1 No. Not Received A105/10.17 BS 4363 1 No. Not Received A105/15.04 Compaction hammer 2 No. Not Received A105/15.05 Compaction pedestal with specimen mould 2 No. Not Received holder A105/15.08 Suitable electrically operated laboratory 1 No. Not Received mixer, 10 litres capacity A105/15.11 Suitable mechanical mixer 1 No. Not Received A105/15.12 Water bath minimum 150 mm deep, 1 No. Not Received thermostatically controlled to maintain water temperature at 60° C ± 1° C with perforated false bottom or equipped with shelf to support specimen 50 mm above the bottom of bath, etc. A105/15.13 Isomantle electric heater for mixing bowl of 2 No. Not Received laboratory mixer STATUS OF LABORATORY EQUIPMENT FOR DBM AS AT 27TH NOVEMBER 2018
Appendix Description Quantity Remarks
No. A105/15.14 Thermometer (50° C - 250° C) 50 mm 2 No. Not Received diameter with 180 mm stainless steel stem A105/16.20 Gyratory compactor GYROCOMP or 1 No. Not Received equivalent with 1×100 mm and 1×150 mm moulds A105/16.21 ILS calibration equipment 76-B0255 ILS for 1 No. Not Received (a) Gyro compactor or equivalent A105/16.23 BITUMAX: Asphalt binder analyser (ignition 1 No. Not Received method) 220 V/50 Hz complete with accessories (metal stand/face stand/safety cover)