Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Thermostat housing
Bosch for Ford Fiesta
SRI-July-05 / Page1
g GE Automotive GE Plastics
Advantages versus
Polypropylene
• Higher temperature
resistance
• Paintability
Advantages versus
Polypropylene and Polyamide
• Improved dimensional
stability
• Temperature resistance
(local peak temperature
of 230oC does not cause
any warp)
Water pump
impeller
Ford 2,5 l 3,0l
(USA)
SRI-July-05 / Page1
g GE Automotive GE Plastics
Engine appearance
cover
Ford 4,6l V8
SRI-July-05 / Page1
g GE Automotive GE Plastics
Fuse boxes
Rover, Honda, Nissan and Jaguar
(Moulder: UTA/MAI, Sumitomo-Lucas Rists)
SRI-July-05 / Page1
Comparison between PPS vs Noryl GTX - Properties
Major Advantages are – Low density , easy process ability,
Low temp. impact , Higher Mech. Property, Cost effective
…etc
PPS 30 % Noryl GTX830
Density g/cc 1.6 1.33
shrinkage across flow % 0.4 - 0.6% 0.2 - 0.3 %
Shrinkage along flow % 0.5 - 0.7% 0.6 - 0.8 %
tensile stress Mpa 141 158
Flexural Modulus Mpa 10480 8580
Izod Impact Notched J/m 90 106
HDT deg C 260 240
Cold temp impact at-30 C J/m NA 80