Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
16'
(4870)
TAILSWING
46' 10-3/4"
(14 294)
3'
39' 7" (12 065) RETRACTED (914)
147' 7-3/4" (45 000) EXTENDED
7' 1-1/2"
(2172) 4' 9-1/4"
18.9° (1454)
2 TM9100
Working Range
FEET
230
220
1° 56
210
25°
200
45°
190 31
180
170
160 148
70°
150
60°
140 130
130 50°
112
120
110 40°
94
100
90 30° 76
80 66
70 58
20°
60
50 40
40 10° 81.5°
MAX
30 BOOM
ANGLE
20
0°
10
0
200 190 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 FEET
AXIS OF ROTATION
3 TM9100
Superstructure specifications
Boom Hydraulic System
40 ft. - 148 ft. (12.1 m - 45.0 m) five-section full power Three main pumps: two high-pressure piston pumps
boom with swingaround auxiliary boom nose. Equipped with horsepower limiting for crane functions. One gear
with remote greasing lines for upper rear wear pad pump for swing and outriggers with a combined
area. Maximum Tip Height: 156 ft. (47.6 m). capacity of 144 GPM (545 L/min).
4 TM9100
Carrier specifications
Chassis Tires
Triple box section, four-axle carrier fabricated from Front: 445/65R22.5 highway tread steel-belted
high-strength, low alloy steel. Removable outrigger tubeless radial singles mounted on aluminum
housings. wheels.
Rear: 14.00R20 highway tread steel-belted tube
Outrigger System type radial duals mounted on steel spoke
Four hydraulic telescoping single-stage double box wheels.
beam outriggers with inverted jacks and integral
holding valves. Quick release type outrigger floats 30.5 Steering
in. (775 mm) diameter. Standard fifth front stabilizer Front axle mechanical steering with hydraulic power
with 18 in. (457 mm) diameter float. Three position assist. Auxiliary ground driven steer pump.
setting with fully extended, intermediate (50%)
extension and fully retracted capacities. Intermediate Brakes
extension is manually pinned. S-cam full air split system operating on all wheels.
Maximum outrigger pad load: 128,500 lbs. (58,300 kg). Spring-applied, air released parking brake acting on rear
axles. Air dryer.
Outrigger Controls
Located in the superstructure cab (hand held) and on Cab
both sides of the carrier with lighted box, require two One man design, all steel fabricated with acoustical
hand operation. Crane level indicator (sight bubble). lining and tinted safety glass throughout. Deluxe fabric
covered fully adjustable air ride seat. Complete driving
Engine controls and engine instrumentation including
Cummins M11-400E Plus diesel, six cylinders, tachometer, speedometer, voltmeter, water temp., oil
turbo-charged and after cooled. 661 cu. in. (10.8 L), 400 pressure, fuel level, air pressure gauge with A/V
hp (298 kW) @ 1500 to 1800 rpm, 375 hp (280 kW) @ warning and engine high temp/low oil pressure/low
2100 RPM. Maximum torque: 1,450 ft. lbs. (1966 N.m) @ coolant level A/V warning. Other standard items include :
1,200 RPM with engine brake and audio-visual engine cruise control, hot water heater/defroster, electric
distress system. windshield wash/wipe, fire extinguisher, seat belt and
door and window locks, power window L/H side, and
Fuel Tank Capacity sliding side window.
(1) 100 gallons (378 L)
Electrical System
Transmission Two 12 V-low maintenance batteries.
Eaton Fuller RTX-14710C, 10 speeds forward, 2 reverse 24 V system and 12 V headlights.
with Fuller AT 1202 two-speed auxiliary.
Lights
Drive Full lighting package including turn indicators, day time
8x4x4 running lights, tail, brake, hazard warning lights, and
beacon lights.
Axles
Front: (2) Eaton EFA24T5 steering tandem. Maximum Speed
Track: 113 in. (2.87 m) track. 55 mph (88 km/h)
Rear: Rockwell RT70-180 tandem with inter-axle
differential locks and No Spin differential in Gross Vehicle Weight
4th axle. Track: 100.75 in. (2.56 m). BASIC STANDARD MACHINE
137,159 lbs. (62 215 kg).
Suspension
Front: Spring mounted tandem. Miscellaneous Standard Equipment
Rear: Solid mounted tandem with equalizing beam Aluminum fenders and carrier decking; lifting, towing
and steel saddles. and tie down lugs; permalube drive lines; component
handling slings with hooks, lockable rigging box, amber
flashing light. Aluminum fuel and hydraulic tanks. Air
powered greasing system for swing bearing, pivot pin,
and lift cylinder shafts. Trailing boom kit (minus dolly).
Superstructure light package includes boom lights, hoist
light and cab work lights.
TM9100 5
40 - 148 ft. 24,000 lbs. 100% 360°
(12.1 - 45.0 m) (10 886 kg)
Pounds
Max. boom length (ft.) at 0 degree boom angle (no load) 111.6
Note: ( ) Boom angles are in degrees.
*This capacity is based on maximum boom angle.
Boom
Angle 39.6 66.6 93.6 111.6
T1 0 0 0 0 100
T3 0 0 50 83 100
T4 0 0 50 83 100
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
6 TM9100
40 - 148 ft. 7,700 lbs. 100% 360°
(12.1 - 45.0 m) (3493 kg)
Pounds
7,450 6,070
90 (31) (51.5)
5,270 3,950
100
(15.5) (46)
2,260
110 (40)
Max. boom length (ft.) at 0 degree boom angle (no load) 111.6
Boom
Angle 39.6 66.6 93.6 111.6
T1 0 0 0 0 100
T3 0 0 50 83 100
T4 0 0 50 83 100
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
TM9100 7
40 - 148 ft. 0 lbs. 100% 360°
(12.1 - 45.0 m) (0 kg)
Pounds
5,180 3,800
90 (31) (51.5)
3,260 1,940
100 (15.5) (46)
Max. boom length (ft.) at 0 degree boom angle (no load) 111.6
Boom
Angle 39.6 66.6 93.6 111.6
T1 0 0 0 0 100
T3 0 0 50 83 100
T4 0 0 50 83 100
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
8 TM9100
40 - 148 ft. 0 lbs. 100% 360° No Aux. Hoist Structure
(12.1 - 45.0 m) (0 kg)
Pounds
Max. boom length (ft.) at 0 degree boom angle (no load) 111.6
Boom
Angle 39.6 66.6 93.6 111.6
T1 0 0 0 0 100
T3 0 0 50 83 100
T4 0 0 50 83 100
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
TM9100 9
40 - 148 ft. 24,000 lbs. 100% 360°
(12.1 - 45.0 m) (10 886 kg)
Pounds
4,630 6,080
110 (26.5) (40)
4,350
120 (32.5)
2,910
130 (23)
Maximum boom length (ft.) at 0 degree boom angle (no load) 111.6
Boom
Angle 39.6 57.6 66.6 75.6 93.6 111.6
T1 T2 T3 T4 % MODE B
T3 0 0 0 0 0 33 67 100
T4 0 0 0 0 0 33 67 100
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
10 TM9100
40 - 148 ft. 7,700 lbs. 100% 360°
(12.1 - 45.0 m) (3493 kg)
Pounds
2,470 3,950
100
(36) (46)
2,260
110
(40)
Maximum boom length (ft.) at 0 degree boom angle (no load) 93.6
Boom
Angle 39.6 57.6 66.6 75.6 93.6
T1 T2 T3 T4 % MODE B
T3 0 0 0 0 0 33 67 100
T4 0 0 0 0 0 33 67 100
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
TM9100 11
40 - 148 ft. 0 lbs. 100% 360°
(12.1 - 45.0 m) (0 kg)
Pounds
Maximum boom length (ft.) at 0 degree boom angle (no load) 75.6
Boom
Angle 39.6 57.6 66.6 75.6
T3 0 0 0 0 0 33 67 100
T4 0 0 0 0 0 33 67 100
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
12 TM9100
40 - 148 ft. 0 lbs. 100% 360° No Aux. Hoist Structure
(12.1 - 45.0 m) (0 kg)
Pounds
1,310
100
(46)
Maximum boom length (ft.) at 0 degree boom angle (no load) 75.6
Boom
Angle 39.6 57.6 66.6 75.6
T3 0 0 0 0 0 33 67 100
T4 0 0 0 0 0 33 67 100
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
TM9100 13
148 ft. 31 - 56 ft. 24,000 lbs. 100% 360°
(45.0 m) (9.4 - 17.1 m) (10 886 kg)
Pounds
*11,700
25
(81.5)
11,700 *5,820
30
(81) (81.5)
11,700 5,820
35
(79.5) (81)
11,050 9,600 5,820
40
(77.5) (80.5) (80)
10,400 9,600 7,250 5,820
45
(76) (79) (81) (78.5)
9,790 9,000 7,250 5,450
50
(74) (77) (79) (77.5)
9,110 7,970 6,900 5,100 4,930
60
(71) (73.5) (75.5) (74.5) (79.5)
8,410 7,120 6,600 4,900 4,430 3,610
70
(67.5) (70) (72) (71.5) (76.5) (80)
7,410 6,420 6,080 4,700 4,220 3,510
80
(63.5) (66.5) (68) (68) (73.5) (76.5)
6,590 5,820 5,590 4,500 3,950 3,380
90
(60) (62.5) (64) (65) (70) (73)
5,900 5,310 5,170 4,150 3,570 3,260
100
(56) (58.5) (60) (62) (66.5) (70)
4,820 4,870 4,800 3,700 3,240 3,170
110
(52) (54.5) (55.5) (58.5) (63) (66)
4,020 4,240 4,470 3,300 2,950 2,930
120
(47.5) (50) (51) (55) (59.5) (62)
3,540 3,770 2,960 2,700 2,720
130
(42.5) (45) (51) (56) (58)
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
14 TM9100
148 ft. 31 - 56 ft. 7,700 lbs. 100% 360°
(45.0 m) (9.4 - 17.1 m) (3493 kg)
Pounds
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
TM9100 15
148 ft. 31 - 56 ft. 0 lbs. 100% 360°
(45.0 m) (9.4 - 17.1 m) (0 kg)
Pounds
A6-829-015396A
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
16 TM9100
121 ft. 31 - 56 ft. 24,000 lbs. 100% 360°
(36.9 m) (9.4 - 17.1 m) (10 886 kg)
Pounds
A6-829-015427A
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
TM9100 17
121 ft. 31 - 56 ft. 7,700 lbs. 100% 360°
(36.9 m) (9.4 - 17.1 m) (3493 kg)
Pounds
A6-829-015428A
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
18 TM9100
121 ft. 31 - 56 ft. 0 lbs. 100% 360°
(36.9 m) (9.4 - 17.1 m) (0 kg)
Pounds
12,900
25 (80)
12,900 *10,100 11,850
30 (78.5) (81.5) (81)
12,900 10,100 11,850
35 (76.5) (80) (79.5)
12,900 9,890 7,320 10,800
40 (74.5) (78) (80.5) (77.5)
12,900 9,420 7,270 9,910 *5,160
45 (72.5) (76) (78.5) (76) (81.5)
12,900 9,000 7,060 9,130 5,160
50 (70.5) (74) (76) (74.5) (80)
12,550 8,260 6,680 7,880 4,930 3,680
60 (66) (69.5) (72) (71) (76.5) (80.5)
10,500 7,650 6,390 6,910 4,540 3,600
70 (62) (65) (67) (67) (73) (77)
7,150 7,130 6,150 6,130 4,210 3,430
80 (57.5) (60.5) (62.5) (63.5) (69) (73)
4,630 5,810 5,920 5,500 3,930 3,280
90 (52.5) (55.5) (57.5) (59.5) (65.5) (68.5)
2,690 3,630 3,920 4,600 3,690 3,160
100 (47.5) (50.5) (52) (55.5) (61) (64.5)
1,150 1,900 2,940 3,480 3,080
110 (41.5) (44.5) (51.5) (57) (59.5)
1,590 2,910 2,990
120 (47) (52) (54.5)
1,560
130 (47)
Minimum boom angle
(deg.) for indicated length 37 41 45 43 44 45
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane's load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
TM9100 19
Travel proposal
57'
(17 373)
12' 6"
(3810)
18' 8"
(5690)
39' 1"
(11 913)
GVW
118,902 lbs.
(53 934 kg)
INSTALLED REMOVED
● 148 ft. (45.0 m) 5-section boom ● Counterweight (24,000 lbs. [10 900 kg])
● 5,700 lbs. (2586 kg) two axle boom dolly
● Main and auxiliary hoist w/rope TIRES
● 56 ft. (17.0 m) bi-fold boom extension
Front: 4X 445/65R22.5
● 10 ton (560 lbs.) ball on carrier
Rear: 8X 14:00R20
● 65 ton (1,040 lbs.) block at boom point.
Dolly: 8X 11-22.5
● Boom extended 0 ft. (0 m) w/aux. nose
● Front and rear O/R boxes
● 175 lbs. (79.4 kg) operator
20 TM9100
Rated Lifting Capacities Symbols Glossary
IMPORTANT NOTES:
Frame Steering
Speed H Hookblock
Grade Gear
TM9100
Grove Worldwide – World Headquarters Grove France S.A.
Grove North America 16, chaussée Jules-César, 95520 OSNY
1565 Buchanan Trail East B.P. 203, 95523 CERGY PONTOISE CEDEX
P.O. Box 21 France
Shady Grove, Pennsylvania 17256, U.S.A. Tel: [Int + 33] (1) 30313150
Tel: [Int + 1] (717) 597-8121 Int: [Int + 33] (1) 30386085
Fax: [Int + 1] (717) 597-4062
Western Hemisphere, Asia/Pacific Grove Asia/Pacific - Regional Office
171 Chin Swee Road
Grove Europe Limited* #06-01 San Centre
Sunderland SR4 6TT, England Singapore 0316
Tel: [Int + 44] 191 565-6281 Tel: [Int + 65] 536-6112
Fax: [Int + 44] 191 564-0442 Fax: [Int + 65] 536-6119
Europe, Africa, Middle East Asia/Pacific, Near East
Constant improvement and engineering progress make it necessary that we reserve the right to make
specification, equipment, and price changes without notice. Illustrations shown may include optional
equipment and accessories and may not include all standard equipment.
Distributed By: