Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1-7. Enumerate the seven (7) SI Base quantities and their corresponding units ( Two Points each )
11. The term used to alter the performance of an instrument to ensure that the values it indicates are correct within the
specified limits is called ________________.
12. Perform legally required test/s and calibrations then compare the results with a regulation or requirement to
determine whether it passed or failed is called___________.
13. _______________ is to determine the characteristic of a product, a process or a service, according to a certain
procedures, methodologies or requirements.
14. ______________ is the comparison of a sample with a known standard. The standard must be at least ______ times
more accurate than the sample.
15.____________ is the degree of how close your results to your desired target.
16. ____________ is the degree of how close results with each other.
18- 21. Give the four (4 ) variable controls in instrumentation and calibration
23.Yana Chemodities Inc. used to calibrate temperature enclosures instruments in accordance to what standard.
24. Yana Chemodities Inc. used to calibrate digital weighing instruments in accordance to what standard.
25. _______________ is the amount of matter in an object or weighing in vacuum or determining mass in a vacuum.
30. This test determines whether the indication is the same or within limits when a load is placed on different parts of
the platform.
Part II: Basic Electronics ( Using OHM´s Law )
1. How many % of the total capacity that can be consider for the span calibration?
2. What are the 7 classifications of OIML weights?
3. Classification of test weights that can be used for the calibration of analytical balance and precision balance.
4. Classification of test weights that can be used for the calibration of balance with 0.01 resolution
5. Classification of test weights that can be used for the calibration of industrial balance
6. It is the amount of matter in an object and always constant at any location
7. A gravitational force acting on an object and measured in Newton
8. This test checks the consistency of the balance indication
9. This test determines the accuracy of the scale using standard weights with different denominations
10. It is the term associated when determining mass in air.