Sei sulla pagina 1di 2

Previous Screen

Welcome: q631sas1
Product:  GENERATOR SET 
Model:  C7.1DE200E GENERATOR SET ECW 
Configuration: C7.1 DE200E0/DE220E0 Generator Set ECW00001-UP 

Operation and Maintenance Manual


DE Series Generator Set With Cat C7.1 Engine
Media Number -SEBU9241-05 Publication Date -01/03/2015 Date Updated -31/05/2019

i05736468

Battery - Replace
SMCS - 1401-510

Batteries give off combustible gases which can explode. A spark can
cause the combustible gases to ignite. This can result in severe personal
injury or death.

Ensure proper ventilation for batteries that are in an enclosure. Follow


the proper procedures in order to help prevent electrical arcs and/or
sparks near batteries. Do not smoke when batteries are serviced.

The battery cables or the batteries should not be removed with the
battery cover in place. The battery cover should be removed before any
servicing is attempted.

Removing the battery cables or the batteries with the cover in place may
cause a battery explosion resulting in personal injury.

1. Switch the engine to the OFF position. Remove all electrical loads.

2. Turn off any battery chargers. Disconnect any battery chargers.

3. The NEGATIVE "-" cable connects the NEGATIVE "-" battery terminal to the NEGATIVE "-"
terminal on the starting motor. Disconnect the cable from the NEGATIVE "-" battery terminal.
4. The POSITIVE "+" cable connects the POSITIVE "+" battery terminal to the POSITIVE "+"
terminal on the starting motor. Disconnect the cable from the POSITIVE "+" battery terminal.

Note: Always recycle a battery. Never discard a battery. Dispose of used batteries to an
appropriate recycling facility.

5. Remove the used battery.

6. Install the new battery.

Note: Before the cables are connected, ensure that the engine start switch is OFF.

7. Connect the cable from the starting motor to the POSITIVE "+" battery terminal.

8. Connect the NEGATIVE "-" cable to the NEGATIVE "-" battery terminal.

Copyright 1993 - 2019 Caterpillar Inc. Mon Nov 04 2019 16:50:59 GMT+0200 (Jordan Standard Time) 
All Rights Reserved.
q631sas1 
Private Network For SIS Licensees.

Potrebbero piacerti anche