Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
2
PC78US-10
3
PERFORMANCE FEATURES
Productivity
up to 3% increase
(Compared to the PC78US-8)
High mobility
The powerful drawbar pull of the PC78US-8 has
been further enhanced to two percent greater
maximum drawbar pull, providing excellent
steering and hill climbing performance.
4
PC78US-10
engines, electronics, and hydraulic components, Komatsu Komatsu Tier 3 and 4 Interim engines, reduces NOx
has achieved great advancements in technology providing emission to meet Tier 4 levels. The EGR system has
high levels of performance and efficiency in virtually all increased capacity and uses larger and more robust compo-
EGR cooler
Air cooler
5
PERFORMANCE FEATURES
Work priorty
P P mode
Fuel priorty
E E mode
L L mode
B B mode
Work priorty
ATT/P ATT/P mode
Efficient Hydraulic System Fuel priorty
ATT/E ATT/E mode
The PC78US-10 uses a Closed-center Load Sensing
System (CLSS) that improves fuel efficiency and
provides quick response to the operator's demands.
6
PC78US-10
OPERATION FEATURES
9" (235mm)
Protrusion from the
track (Handrail)
1'1" (326mm)
Protrusion from the 9" (230mm)
track (Mirror) Protrusion from
the track (Rear) True Tight Tail Performance
The versatile PC78US-10 can fit into areas where a
conventional machine cannot. The contoured cab design and
convex sliding door allow the cab to swing within the same
turning radius as the counterweight.
9" (230mm)
Protrusion from
the track (Rear)
Ideal For Confined Applications
The PC78US-10 is an ideal machine for residential and
roadwork. The tight tail design and minimum swing radius
makes it possible to work close to buildings, walls and
3" (80mm) other obstacles.
Protrusion from
the track (Step)
7
RELIABILITY FEATURES
Wear ring
8
PC78US-10
WORKING ENVIRONMENT
Silicon
Oil
Pressurized Cab
The air conditioner, air filter, and a higher internal cab air
pressure minimize the amount of external dust that enters
the cab.
9
WORKING ENVIRONMENT
Large High Resolution LCD Monitor
Panel
1 2 3 A new large, user-friendly, high resolution
LCD color monitor enables accurate and
7 smooth work. Screen visibility and
resolution are further improved compared
4 5 6 to the previous LCD monitor panel. The
switches and function keys are easy to
operate and provide simple navigation
8 through the monitor screens.
9
Data is displayed in 25 languages to
support operators around the world.
Indicators B
o
1 Auto-decelerator 5 Hydraulic oil temperature gauge
s
1 2 3 2 Working mode 6 Fuel gauge
Function
switches 3 Travel speed 7 Eco-gauge
Basic 4 5 6 4 Engine water 8 Fuel consumption gauge
operation temperature gauge
9 Function switches menu
switches
10
PC78US-10
MAINTENANCE FEATURES
Aftercooler
Radiator
11
MAINTENANCE FEATURES
12
PC78US-10
GENERAL FEATURES
Standard Blade
Every PC78US-10 comes standard with a 2320mm 7'7"
blade. A wide angle blade is also available as an option.
13
KOMATSU PARTS &
SERVICE SUPPORT
Komatsu CARE – Complimentary
Scheduled Maintenance
■ PM services for the earlier of 3 years / 2000 hours
■ Performed by factory certified technicians
■ Komatsu Genuine parts and fluids
■ Significantly lowers your cost of ownership while
maintaining high uptime and reliability
■ Increases resale value and provides detailed
maintenance records
■ Extended PM services can be purchased beyond
the complimentary period to provide additional
peace of mind and maximize uptime
14
PC78US-10
standard equipment
- any time, anywhere
on all Komatsu
construction products
For construction and compact equipment. For production and mining class machines.
15
SPECIFICATIONS
Engine
ENGINE
Swing System
Model...................................................Komatsu SAA4D95LE-6* Driven by............................................................ Hydraulic motor
Type.................................Water-cooled,
TRANSMISSION 4-cycle, direct injection Swing reduction................................................... Planetary gear
Aspiration....Variable flow, turbocharged, air-to-air aftercooled EGR Swing circle lubrication....................................... Grease-bathed
Number of cylinders................................................................. 4 Swing lock............................................... Mechanical disc brake
AXLES
Bore....................................................................... 95 mm 3.74" Swing speed.................................................................... 10 rpm
Stroke...................................................................115 mm 4.52"
SUSPENSION SYSTEM
Piston displacement............................................3.26 ltr 199 in 3
Horsepower: Undercarriage
SAE STEERING
J1995............................................Gross
SYSTEM 50.7 kW 68 HP Center frame............................................................. X-frame leg
ISO 9249 / SAE J1349.........................Net 48.8 kW 65.5 HP Track frame...............................................................Box-section
Rated rpm...................................................................... 1950 Track type........................................................................ Sealed
BRAKES Track adjuster...............................................................Hydraulic
Governor......................................... All-speed control, electronic
Number of shoes (each side)................................................. 39
Lubrication system:
Number of carrier rollers (each side)......................................... 1
MAIN FRAME
Method......................................Gear pump, force-lubrication Number of track rollers (each side)........................................... 5
Filter.......................................................................... Full-flow
Air cleaner.
BODY ...................................... Air cleaner, double element
and auto dust evacuator coolant & lubricant capacity
( Refilling)
*EPA Tier 4 Final emissions certified
HYDRAULIC SYSTEM Fuel tank....................................................... 125 ltr 33 U.S. gal
Radiator....................................................... 13 ltr 3.43 U.S. gal
Hydraulics Engine........................................................ 11.5 ltr 3.04 U.S. gal
CAB
Final drive, each side..................................... 1.1 ltr .29 U.S. gal
Type ......... HydrauMind (Hydraulic Mechanical Intelligence New Swing drive....................................................2.0 ltr .53 U.S. gal
Design) system, closed-center system with load sensing valve
WEIGHT (APPROXIMATE) Hydraulic tank.............................................. 56 ltr 14.8 U.S. gal
and pressure compensated valve
Number of selectable working modes .................................... 6
TIRES
Main pumps: operating weight ( approximate )
Pumps for................... Boom, arm, bucket, and travel circuits Operating weight includes 3710 mm 12'2" one-piece boom,
Type..SERVICE REFILL
.....................Variable CAPACITIES
capacity piston type, axial piston 2250 mm 7'5" arm, SAE heaped 0.2 m3 0.26 yd 3 bucket, rated
Maximum flow............................... 160 ltr/min 42.2 gal/min capacity of lubricants, coolant, full fuel tank, operator, and
standard equipment.
Pumps for.................................................... Swing and blade
DIMENSIONS
Type................................................. Fixed displacement gear With Blade
Travel.............................. 2 x piston motor with parking brake
Maximum
STANDARD flow...............................
EQUIPMENT 63 ltr/minFOR 16.64
BASE MACHINETrack Shoes
gal/min Operating Weight Ground Pressure
Hydraulic motors: 7910 kg 34.9 kPa / 0.36 kg/cm2
450 mm 18"
17,439 lb 5.06 psi
Swing...........
OPTIONAL piston motor with swing holding brake
1 x axialEQUIPMENT
8080 kg 26.7 kPa / 0.27 kg/cm2
Relief valve setting: 600 mm 24"
17,813 lb 3.87 psi
Implement circuits............. 26.5 MPa 270 kgf/cm2 3,844
psi 450 mm 18" 8050 kg 35.1 kPa / 0.36 kg/cm2
Travel circuit....................... 27.0 MPa 275 kgf/cm2 3,916 psi Road Liner 17,747 lb 5.09 psi
Swing circuit....................... 21.1 MPa 215 kgf/cm2 3,060 psi
Pilot circuit................................ 3.2 MPa 33 kgf/cm2 464 psi
Blade circuit (Raise)............ 12.7 MPa 130 kgf/cm2 1,842 psi
Blade circuit (Lower).......... 20.0 MPa 210 kgf/cm2 2,900 psi
Hydraulic cylinders:
(Number of cylinders – bore x stroke x rod diameter)
Boom. 1–115 mm x 858 mm x 65 mm 4.53" x 33.8" x 2.56"
Arm......1–100 mm x 861 mm x 60 mm 3.9" x 33.9" x 2.36"
Bucket.1–90 mm x 710 mm x 55 mm 3.54" x 27.95" x 2.17"
Blade...1–130 mm x 200 mm x 65 mm 5.12" x 7.87" x 2.56"
16
PC78US-10
Dimens ions
Arm Length 2100 mm 6'11"
G
Boom length 2250 mm 7'5"
120
B Overall height (to top of boom) 2945 mm 9'8"
2320
C Overall width 2330 mm 7'8"
D Overall height (to top of cab)* 2760 mm 9'1"
1395
F Ground clearance, minimum 410 mm 1'4"
C,N A
G Tail swing radius 1390 mm 4'7" O
H Track length on ground 2235 mm 7'4"
470
N Machine cab width 2330 mm 7'8" J I
K
O Distance, swing center to rear end 1885 mm 6'2"
* : Dimension of the machine with the triple grouser shoes.
0.09 m3 0.12 yd3 0.08 m3 0.10 yd3 350 mm 13.7" 450 mm 17.7" 145 kg 319.7 lb 3
0.12 m3 0.16 yd3 0.11 m3 0.14 yd3 450 mm 17.7" 550 mm 21.7" 160 kg 352.7 lb 3
0.20 m3 0.26 yd3 0.18 m3 0.24 yd3 550 mm 21.7" 650 mm 25.6" 185 kg 407.9 lb 3
0.28 m3 0.37 yd3 0.25 m3 0.33 yd3 650 mm 25.6" 750 mm 29.5" 210 kg 463.0 lb 4 X
0.34 m3 0.44 yd3 0.30 m3 0.39 yd3 755 mm 29.7" NA 25.6" 210 kg 463.0 lb 4 X
working range
(m)
I Boom Length 3710 mm 12'2"
8
Arm Length 2250 mm 7'5"
7
A Maximum digging height 7650 mm 25'1"
6 B Maximum dumping height 5550 mm 18'3"
5 C Maximum digging depth 4660 mm 15'3"
4 D Maximum vertical wall digging depth 3980 mm 13'1"
A
3 E Max. digging depth of cut for 8' level bottom 4380 mm 14'4"
B
2 F Maximum digging reach 6920 mm 22'8"
430mm
D 2 53.3 kN
C E H Bucket digging force
SAE rating
3
5440 kgf / 11,982 lb
33.3 kN
4 Arm crowd force
3380 kgf / 7,486 lb
5
8 7 6 5 4 3 2 1 0
(m) 61.3 kN
2.44 Bucket digging force
ISO rating
Arm: 2250 mm 7'5" (with ATT piping) Shoes: 450 mm 18" Road Liner Unit: kg lb
A 1.5 m 4'11" 3.0 m 10' 4.5 m 14'9" MAX
B Cf Cs Cf Cs Cf Cs Cf Cs
5m * 1820 1570
16' 5" * 4020 3470
3m * 2260 * 2260 * 1870 1550 * 1700 1100
10 ' * 4980 * 4980 * 4130 3420 * 3760 2440
0m * 3510 2460 * 2290 1400 * 1750 1010
0' * 7750 5420 * 5060 3090 * 3870 2240
-2.0 m * 4490 * 4490 * 3040 2410 * 1940 1370 * 1720 1260
6' 7" * 9900 * 9900 * 6720 5320 * 4290 3030 * 3790 2790
*Load is limited by hydraulic capacity rather than tipping. Ratings are based on ISO standard No. 10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
Arm: 2250 mm 7'5" (with ATT piping) Shoes: 450 mm 18" Rubber Shoe Unit: kg lb
A 1.5 m 4'11" 3.0 m 10' 4.5 m 14'9" MAX
B Cf Cs Cf Cs Cf Cs Cf Cs
5m * 1820 1530
16' 5" * 4020 3380
3m * 2260 * 2260 * 1870 1510 * 1700 1070
10 ' * 4980 * 4980 * 4130 3330 * 3760 2370
0m * 3510 2380 * 2290 1350 * 1750 980
0' * 7750 5260 * 5060 2990 * 3870 2170
-2.0 m * 4490 * 4490 * 3040 2340 * 1940 1330 * 1720 1220
6' 7" * 9900 * 9900 * 6720 5150 * 4290 2940 * 3790 2700
*Load is limited by hydraulic capacity rather than tipping. Ratings are based on ISO standard No. 10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
18
PC78US-10
Arm: 2250 mm 7'5" (with ATT piping) Shoes: 450 mm 18" Road Liner Unit: kg lb
A 1.5 m 4'11" 3.0 m 10' 4.5 m 14'9" MAX
B Cf Cs Cf Cs Cf Cs Cf Cs
5m * 1820 1570
16' 5" * 4020 3470
3m * 2260 * 2260 1830 1550 1290 1100
10 ' * 4980 * 4980 4030 3420 2860 2440
0m 3050 2460 1670 1400 1200 1010
0' 6730 5420 3680 3090 2640 2240
-2.0 m * 4490 * 4490 3000 2410 1640 1370 1500 1260
6' 7" * 9900 * 9900 6610 5320 3620 3030 3320 2790
*Load is limited by hydraulic capacity rather than tipping. Ratings are based on ISO standard No. 10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
Arm: 2250 mm 7'5" (with ATT piping) Shoes: 450 mm 18" Rubber Shoe Unit: kg lb
A 1.5 m 4'11" 3.0 m 10' 4.5 m 14'9" MAX
B Cf Cs Cf Cs Cf Cs Cf Cs
5m 180O 1530
16' 5" 3980 3380
3m * 2260 * 2260 1780 1510 1260 1070
10 ' * 4980 * 4980 3930 3330 2780 2370
0m 2960 2380 1620 1350 1160 980
0' 6540 5260 3570 2990 2570 2170
-2.0 m * 4490 * 4490 2910 2340 1590 1330 1460 1220
6' 7" * 9900 * 9900 6420 5150 3510 2940 3220 2700
*Load is limited by hydraulic capacity rather than tipping. Ratings are based on ISO standard No. 10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
19
STANDARD EQUIPMENT
■ 2320 mm 7'8" blade ■ Hydraulic control unit, 1 actuator ■ Seat belt indicator
■ Alternator, 24 Ampere, 60V ■ Hydraulic track adjusters ■ Secondary engine shutoff switch
■ AM/FM radio ■ KOMTRAX® ■ Service valve
■ Automatic engine warm-up system ■ Large LCD color monitor, high resolution ■ Skylight
■ Auxiliary input (3.5mm jack) ■ Mirrors, (LH and RH) ■ Starter motor, 4.5kW
■ Battery disconnect switch ■ Operator Protective Top Guard (OPG), ■ Suction fan
■ Counterweight, 490 kg 1,080 lb ■ Pattern change valve (ISO to BH control) ■ Travel alarm
■ Dry type air cleaner, double element ■ PPC hydraulic control system ■ Working lights, 2 cab/1 boom LH
■ Electric horn ■ Pump/engine room partition cover ■ Working mode selection system
OPTIONAL EQUIPMENT
■ Arms ■ Shoes, road liner, 450 mm 18" ■ Track roller guard
– 2250 mm 7'5" arm assembly ■ Shoes, triple grouser, 450 mm 18" ■ Blade assembly 2330 mm 7'8"
■ Boom ■ Shoes, triple grouser, 600 mm 24" ■ Wide blade 2470 mm 8'1"
– 3710 mm 12'2" arm assembly ■ Shoes, rubber shoe, 600 mm 24" (requires 600 mm 24" shoes)
Attachment options
■ Hydraulic couplers For a complete list of available
attachments, please contact your local
Komatsu distributor.
AESS877-03 ©2016 Komatsu America Corp. Printed in USA AD06(1.5)OTP 01/17 (EV-2)