Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
d
va l an
ro s
A pp ation
l l
ica lcu
c hn al ca
e c
nal T typi
ti o d
Na verifie
The right support for every job
• Steel prop
• Available in four lengths
• Heights from 1.80 m to 5.50 m
• DIN EN 1065
size 2 – class B/D
size 3 – class B/D
size 4 – class C/D
size 7 – class C/D
2
TITAN HV LITE prop TITAN Megashore leg
3
The right parts for every application
Quick setting-up
4
Connections between legs/props and timber or aluminium formwork beams
Post shore positioners TITAN 160 H 4-way head TITAN 120 4-way head Table form adapter
for locating and retaining for 160 H aluminium for TITAN 120 aluminium for quick connection of
props beneath aluminium formwork beam. formwork beam. TITAN 160 H and 225
formwork beams. Galvanised. Galvanised. aluminium formwork beams
Weight 2.60 kg Weight 1.70 kg to head plate.
TITAN 50 positioner Art.-No.0620140018 Art.-No.0620140016 Weight 2.9 kg
for all props except S2/S3. Art.-No.0120450034
Weight 0.10 kg TITAN H20 4-way head
Art.-No.0620490059 for H20 timber joists.
Galvanised.
TITAN 38 positioner Weight 4.00 kg
for TITAN S2 and S3. Art.-No.1120140015
Weight 0.10 kg
Art.-No.0620490058
Locating disc for attaching four-way heads and table form
adapters (not required for TITAN S2 and S3).
WeightArt.-No.
0.44 kg 0120140014
Timber bracing clamp TITAN ledger frame Scaffold coupler 76/48 TITAN half coupler
for connecting steel props for increasing load-carrying for stiffening aluminium for connecting Ø48 mm
together with timber planks capacity or for stability screw jacks with Ø48 mm scaffold tubes to aluminium
for stability. Painted. (alternative to tripod). Seven scaffold tubes. AF 19. legs (TITAN Megashore and
Weight 1.10 kg ledger frame sizes are Galvanised. TITAN HV).
Art.-No.1420140020 available (see also page 19). Weight 1.70 kg Weight 1.56 kg
Art.-No.0720300085 Art.-No.0620150089
5
TITAN S telescopic steel prop
4 4.10 4.00
3.50
3 3.00
2.60
2.30
Height L [m]
2
1.80
Designation: Size 2 – class B/D Size 3 – class B/D Size 4 – class C/D Size 7 – class C/D
System-related load: 39 to 21 kN 35 to 21 kN 39 to 23 kN 22.5 to 20 kN
Weight: approx. 16 kg approx. 18 kg approx. 26 kg approx. 33 kg
6
Head plate
• with universal fixing holes for
compatibility with other systems
Inner tube
• Sizes 2 and 3: 48.3 x 4 mm
• Sizes 4 and 7: 60 x 3.2 mm
• Strengthened
(yield stress > 320 N/mm²)
• “Thumb-saver” prevents hand
injuries
• with retainer ring
Washer
• Reduces friction
• Rotates, galvanised
Fixing pin
• Captive, galvanised
• Made from spring steel
Prop ID
• For quick identification of size
Collar and supplier
• Simple fine adjustment, protected • Top edge of ID label also
thread indicates lowest point of collar
• Lubricated for life
• Stamped approval number (standard,
class, size, year of production)
• Two-start trapezoidal thread eases
striking
Head and base plates with
universal fixing holes and
central hole
Outer tube
• Sizes 2 and 3: 57 x 2.6 mm, size 4,
painted or hot-dip galvanised size 7
• Sizes 4 and 7: 70 x 2.9 mm,
painted
size 2,
size 3
Base plate
• with universal fixing holes
• with drain hole
7
TITAN S telescopic steel prop
Loading data
8
Weimar Atrium, Weimar
Conversion of an existing
industrial building into a
shopping centre. TITAN
Alu-Flex slab formwork
system and TITAN S steel
props size 7.
New Eurohotel,
Günzburg
Minimal floor slab support
with TITAN S steel props
size 2 and TITAN 160 H
aluminium formwork beams.
Steel props also secured
with bracing clamps.
9
TITAN HV LITE prop
Applications:
• Slab formwork
• Temporary propping
• Support to edge beams
• Table forms
6 6.10
Leg heights with
min./max. extension max.
and combinations 5.25 5.60
5
max.
4.40 4.25
4 4.05
min.
3.50 min.
3 3.05 3.50
2.95
Height L [m]
2
1.75
10
Screw jack end plate
• with universal fixing holes for
compatibility with other systems
HV screw jack
• made from steel, hot-dip
galvanised
• Separate additional screw jack
available in two sizes 11
TITAN HV adjustable leg
Loading data
National Technical Approval Height H Perm. load, HV leg Height H Perm. load, HV Maxi leg
Z-8.312-938 [m] [kN] [m] [kN]
Screw jack Screw jack Screw jack Screw jack
at base at top at base at top
1.75 96.1 63.9 2.95 53.6 58.0
1.85 96.1 63.9 3.05 53.6 58.0
1.95 89.4 59.1 3.15 50.8 52.0
2.05 82.6 54.3 3.25 47.9 46.0
2.15 76.4 50.1 3.35 45.1 41.0
70
2.25 70.1 2.95 45.9 3.90 4.25
3.60 3.45 42.2 36.0
2.35 64.4 42.3 3.55 39.4 32.2
60
70 2.45 58.6 38.6 3.65 36.6 28.3
2.95 3.60 3.90 4.25
2.55 53.3 35.6 3.75 33.9 25.2
50
60 2.65 48.0 32.5 3.85 31.1 22.0
2.75 43.2 30.1 3.95 28.4 20.0
40
50 2.85 38.3 27.6 4.05 25.7 17.9
2.95 34.0 25.8 4.15 23.0 16.9
30
40 3.05 29.6 23.9 4.25 20.3 15.9
5.90
20 * The maximum load2.40
is limited to 40 kN when using legs with an Iflon disc.
1.75 2.70 3.05 6.10
30
10
Permissible load TITAN HV and TITAN HV Maxi LITE prop
3.50 4.40 5.505.90
20
1.75 2.40 2.70 3.05 6.10
1 2 3 4 5 6 7
100
60
50
Perm. leg load Fv [kN]
30
TITAN HV Maxi
20
12
Combined* legs
• Leg with additional screw jack
• Two legs 4-leg tower
braced with at least* one ledger frame over the height
90* Max. 1 butt joint permitted over the height. We recommend using two ledger frames over the height for better stability.
80
Permissible load Permissible load
Combined legs Loading diagram for 4-leg tower
70 (with one ledger frame over the height)
60 50
50
3.50 4.40 5.50 5.90 6.10
40
Perm. leg load Fv [kN]
40
Perm. leg load Fv [kN]
30
30
3.50
3,50 4.80
4,80 6.10
6,10
20
20
10 10
Height H [m] Height H [m]
4 5 6 37 8 4 9 5 6 7
The results are based on tests carried out in Germany and the USA:
- North Rhine-Westphalia Materials Testing Laboratory, Germany (1992/1995)
- Lehigh University, Bethlehem, Pennsylvania, USA – tests carried out on the recommendation of the Scaffolding, Shoring & Forming Institute
(SSFI), Cleveland, Ohio (2005), procedure SSFI RP 102
- Munich Technical University, Germany, 2008, loading tests for combined props to DIN EN 1065
13
TITAN Megashore leg
Applications:
• Slab formwork
• Temporary propping
• Support to edge beams
• Table forms
• Falsework
• Arch centering
• Mobile formwork
7 6.70 6.50
2 1.70
Height L [m]
Safety catch
• Screw jack cannot
drop out of outer tube
• Easily released for quick adjustment
15
40
TITAN1.7Megashore
2.1
leg
2.5 2.9 3.3 3.7 4.1
30
Loading data
4.3 4.7 5.1 5.5
20
160
60
70 Size 6
50
60
40 4.4 5.2 6.0 6.8
30
120 3.2 3.7 4.2
20 110
4.3 58.7
4.6 4.7 37.5 45.6 46.6
5.1
50
Size 6 5.4 5.5 24.1 37.9
29.9
34.6
25.6
20
10
Height L [m]
2.5 3.5 4.5 5.5 6.5 7.5 8.5 9.5 10.5
3.2 61.2
3.7 43.1
4.2 31.5
16 3.2 99.8
3.8 65.0
4.6 37.5
40
35
30
20 75
5.3 5.7 6.1 6.5
70
15
Single leg 65
70 15
10
60 Height L [m]
2 3 4 5 6 7 8 9 10
2.7 51.4
50
3.1 50.5
3.5 46.2
3.9 37.9
40
140 3.9 41.0
Single leg 4.3 4.7 5.1 5.5 4.3 37.8
for back propping 4.7 33.3
130 5.1 Height
28.4 Perm.
TITAN Megashore leg, 1 2 3 4 5 6 7 8
Size 2 5.3 [m]
28.0 leg load
sizes 2/4/6, for the direct Size 4
120
5.7 25.9 F V [kN]
support of adequately 6.1 23.3
6.5 2
Size 19.3
rigid superstructures (back 1.7 128.0
110 2.1 128.0
propping), safe vertical load 2.9 3.3 3.7 4.1 2.37 128.0
depending on screw jack 3.38 2.5 115.7
100
extension 2.75 103.6
2.9 89.1
90
1.7 2.1 2.5 2.9 Size 4 2.9 128.0
2.37 2.75
3.29 128.0
Perm. leg load Fv [kN]
40
4.3 4.7 5.1 5.5
Height L [m]
1 2 3 4 5 6 7 8 9
1.7 128.0
2.1 128.0
2.37 128.0
2.5 115.7
2.75 103.6
2.9 89.1
2.9 128.0
3.29 128.0 17
3.3 126.6
3.38 122.0
Overview of standard components
18
TITAN Megashore leg Aluminium ledger frame
19
Errors and omissions excepted. © ISCHEBECK 2013
TITAN props size 3 in use together
with the TITAN HV aluminium slab
forming system. Cantilevering edge
beams require additional fixings.
The photos reproduced in this brochure represent momentary snapshots of work on building sites. It is therefore possible that certain facts and
circumstances do not fully correspond to the technical (safety) requirements.
Certified Management-System to DIN EN ISO 9001 / 2008 ; Registry-No. DE-96-010 Zertifiziertes Management-System nach DIN EN ISO 9001 / 2000
Registriernummer DE-96-010
482.11.01.50.1/1312/50