Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Assignment I
Academic Year (2018-2019)
Sem V Max.marks 5
Subject Subject
15AE53 HEAT MASS TRANSFER
Code Name Date of
Date 6/9/2018 12/9/18
submission
CO303.2 Familiarize the student in the area of conduction, convection and radiation
6 a With equation,explain mass transfer in boundary layer flow over a flat plate CO303.1 L2
The heat flow rate through a wood board of L=2cm thick for a temperature difference
6 b of ∆T=250c between 2 surface is 150W/m2.calculate the thermal conductivity of the CO303.1 L2
wood
Learni
Q. No MODULE-II CO ngLeve
l
Derive and explain the 3-D heat conduction equation in rectangular co
1 a CO303.2 L2
ordinates.Mention the significance of the thermal diffusivity
Compute the heat loss/m2 of the surface area of a furnace wall 25cm thick.the
inner and outer surface temperature are 4000c and 400c respectively.the
2 a CO303.2 L2
variation of k in W/mK with temperature in oc given by equation K=0.002T-
10-6T2
A composite slab is made of 2 materials A and B.Layer A is 5mm thick,layer
B is 10mm thick,the outer surface of layer A is maintained at 6000c and that of
layer B is maintained at 300c.the thermal conductivities of layer A and B vary
3 a CO303.2 L2
with temperature as follows
KA=0.05(1+0.008T),KB=0.04(1+0.0075T),W/mK.Determine the steady state
heat flux through the composite slab.
The thermal conductivity of insulating material used to reduce heat gain into a
cryogenic hemispherical shaped container varies as k=0.028(1+50*10-4T)
Where T is in 0C and k is W/mK.the inner radius is 16cm and the thickness
4 a CO303.2 L2
insulation is 12cm.the inner surface is at -1900c while the other surface is at
100c.determine the heat loss and temperature at mid radius and the radius at
which the temperature is -500c.
A pipe of 60cm diameter is covered with an insulation of thickness 12cm over
it.the thermal conductivites of the insulating material varies as
4 b k=0.0545(1+28.4*10-4T),Where T is in 0C and k is W/mK.The pipe surface is CO303.2 L2
at 3000c and the outer surface of the insulation is at 600c.determine the heat
flow per unit length.also find the temperature at the middle of the insulation
Thermal conductivity varies according to k=0.03(1+0.0375T)Where T is in 0C
and k is W/mK.find the heat flow for the temperature 7000c and 600c i)for a
5 a CO303.2 L3
wall of 10mm thick ii) for a hollow sphere of inner radius 50mm and outer
radius 100mm
5 b Derive variable thermal conductivity for a plane wall CO303.2 L1
The thermal conductivity of insulating materials used to reduce heat gain into
hemispherical shaped container varies as k= 0.028(1+50*10-4T) the inner
6 a radius is 16cm & thickness of insulation is 12cm. The inner surface is at -1900c CO303.2 L3
while outer surface is 100c. determine the heat loss and the temp at mid radius
and radius at which temp is -500c.