Sei sulla pagina 1di 1

VP50S

3 way proportional pressure control valve

>> Port size: 1/4” >> Fast response time


(ISO G or NPT) or with pressure output
manifold display
>> Closed-loop air piloted >> Adjustable gain and
proportional pressure pressure range
control valve >> Low power
>> High flow consumption 2

>> Excellent performance >> Feedback signal P


=

characteristics >> Manifold mountable


1 3

Technical features
Medium: Flow: Linearity: Materials:
Compressed dry air, Up to 1400 N l/min < 1% Body: Aluminium
oil free filtered to 5μm. (see characteristic curves) Hysteresis and deadband: Lid: Nylon
Operation: Air consumption: < 1% Front cover and End cap: Nylon
Air piloted spool valve with < 5 N l/min Response Time:
integrated electronic Ambient/Media temperature: < 80 ms (from 10 ... 90% of output Maintenance:
pressure control 0 ... +50°C (+32 ... 122°F) pressure into a 0,1 litre load). No maintenace required
Output (nominal) pressure: Air supply must be dry enough to Vibration & shock immunity: Calibration:
0 ... 2 bar, (0 … 30 psi); avoid ice formation at temperatures <3% span Gain, Span, Zero
0 ... 6 bar, (0 … 90 psi); below +2°C (+35°F) 0,75 m/s², 5 ... 150Hz,
0 ... 10 bar, (0 … 150) Temperature Sensitivity: 1 m/s², 5 ... 150Hz
Supply pressure: Typically better than Weight:
Minimum 2 bar (29 psi) above 0,03% span/°C 0.45 kg
maximum output required, 12 bar Degree of protection:
max. (174 psi) IP65 in normal operation
Air Supply sensitivity: (exhaust and baffle protected
Better than 0,75% span output from water ingress at
change per bar supply pressure temperatures <+5°C (+41°F))
change

Electrical details
Electromagnetic compatibility Conforms to EC requirements
EN 50081-2 (1994) and EN 50082-2 (1995)
Electrical input signal 4 ... 20 mA or 0 ... 10 V factory set
Electrical power input 24 V d.c. ±25%, (power consumption < 1 W)
Output pressure feedback signal 0 ... 10 V full range, <±1% Accuracy
Connections M12x1, 5-pin

Option selector VP50˙˙S˙˙˙11H00


Output pressure Substitute Input signal Substitute
0 ... 2 bar/30 psi 02 0 ... 10 V 1
0 ... 6 bar/90 psi 06 4 ... 20 mA 4
0 ... 10 bar/150 psi 10 Port size Substitute
Unit for pressure Substitute G 1/4 J
bar B NPT 1/4 K
psi P Manifold X
Other pressure ranges are available
to special order: For options not shown
and any specific requirements please
contact the Norgren technical
department via; www.norgren.com/ws

base@basesistemas.com
www.basesistemas.com
976 587 019
Our policy is one of continued research and development. We therefore reserve the right to amend, 3/15
without notice, the specifications given in this document. (2009 - 059c) © 2014 Norgren GmbH en 6.6.035.01

Potrebbero piacerti anche