Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Client: PACK
Project Number:
Lumina Copper SAC F
Task 2000:
Z Geotechnical and Hydrogeological Subsurface Investigation
58.14 ft
2.46 ft
253.65 ft
Field Engineer of g
MWH: H Elevation(m): Borehole Diameter (2 r) :
(satured test) Azimuth: G.W.I. : Initial
hm (m):Depth to Gro
55.68
FD
251.19 ft
DC
Maximum Allowable Pressure
hm Hg FD 1.: Final Depth of the
259.12 ft
193.05 ft
(dry test)
(satured test) G.W.I.
HSoil 6. PM = % Pmax wich is depen
G.W.L. Hg = GWI + isa>75%- Z
251.19 ft
(Saturated Test)
Hg =
36.08 ft
L Notes:
H(Gravity) Hg 1.=Maximum
L / 2 +Allowable
DC Pressur
+ a
(dry test) (Dry Test)
5.- = 159.49 - 25.19 = 134.3 ft . Psi If RQD is < 75% in the test zone then: a : Heigth of cas
4
Pp = 376 psi
PM1= 20%Pmax= 27 PM2= 40%Pmax= 54 PM3= 60%Pmax= 81
5
PM4= 40%Pmax= 54 PM5= 20%Pmax= 27
6
PACKER TEST PM1 (psi) = 27 PM2 (psi) = 54 PM3 (psi) = 81 PM4 (psi) = 54 PM5 (psi) = 27
7
Time Rflowmeter q Rflowmeter q Rflowmeter q Rflowmeter q Rflowmeter q
(minutes) (m3) (Liters) (m3) (Liters) (m3)8 (Liters) (m3) (Liters) (m3) (Liters
4
TEST INFORMATION
RQD%: 70
0.00
84.50
0.5
BOREHOLE Nº :
PACKER TEST
Lumina Copper SAC FORM
Geotechnical and Hydrogeological Subsurface Investigation PT-
BOREHOLE INFORMATION TEST INFORMATION
North (m): Inclination/H ( ) : Depth of the Test: From
; (m) to (m)
East (m): Location: Initial Hour: d top:
Elevation(m): Borehole Diameter (2 r) : cm End Hour: d bottom:
Azimuth: GWL (m) : hm (m): L:
Packer Inflation Pressure = Pp
Flowmeter Expansion Cylinder
Valves 1. Ph = (d top + a) psi Hydrostatic Pressure on the Packer & Convert 1psi = 0.7 m
Pump 2. Pw 200 psi Packer Working Pressure
3. Pp = (Ph + Pw)*1.2 psi Packer Inflation Pressure
Maximum Allowable Pressure = Pmax
1. t = (Hsoil x soil + Hrock x rock) Correct for inclined holes & Convert 1 m = 3.28 feet
2. u = [ (Hsoil + Hrock) - GWL ] x w Correct for inclined holes & Convert 1 m = 3.28 feet
3. ' = t - u Convert 1 psi = 144 psf
4. Hg = H(Gravity) x w Correct for inclined holes & Convert 1 m = 3.28 feet
Convert 1 psi = 144 psf
5. Pmax = ' - Hg
HSoil 6. PM = % Pmax wich is dependant on RQD
If RQD is >75% in the test zone then: P M1 = 25% Pmax P M2 = 50% Pmax
P M3 = 75% Pmax P M4 = 50% Pmax
P M5 = 25% Pmax
If RQD is <75% in the test zone then: P M1 = 20% Pmax P M2 = 40% Pmax
d bottom
psi
27
q
(Liters)
-------------
PM2 (psi) = PM3 (psi) = PM4 (psi) = PM5 (psi) =
RFlowmeter q RFlowmeter q RFlowmeter 1.00 q RFlowmeter q
( m3 ) (Liters) ( m3 ) (Liters) ( m3 ) 2.00 (Liters) ( m3 ) (Liters)
_ _ _ _
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0
Revision Date: February 17, 2010
Revised by: K. Gudenkauf
Checked by: C. Brueckman PACKER TEST BH
Reviewed by: H. Ramirez
FLOW METER
H(Gravity)
a dBOTTOM = Depth from ground surface to bottom of testing zone 90.00 m.
If G.W.L. is above test = Inclination with the horizontal 65 deg
zone
G.W.L. H(Gravity) corrected = SIN x H(Gravity) 18.11 m.
L = Length of the portion of the hole tested 11.00 m.
dTOP H(Gravity) If G.W.L.is 2r = Two times the radius of hole tested (Diameter) 9.63 cm.
below test zone
PM = Gauge Pressure
G.W.L.
Dp = Head Loss
q = Volume in liters during the test
L
L/2 K(cm/s)
d BOTTOM
0.000E+00 5.000E-06 1.000E-05 1.500E-05 2.000E-05
2r 1
6 0.658 5.00 0.753 4.00 0.820 3.00 0.856 2.00 0.873 1.00 5
7 0.662 4.00 0.757 4.00 0.823 3.00 0.858 2.00 0.874 1.00
8 0.666 4.00 0.761 4.00 0.827 4.00 0.860 2.00 0.875 1.00
9 0.670 4.00 0.765 4.00 0.830 3.00 0.862 2.00 0.876 1.00
10 0.675 5.00 0.769 4.00 0.833 3.00 0.864 2.00 0.877 1.00
Sum of q (l) = 45.0 24.0 43.0 24.0 11.0
Average q(l) from raw data=Q(l/min) = 4.50 2.40 4.30 2.40 1.10 K : 3.881E-08 m/s
Lugeon:
Average q(l) from raw data=Q (m /sec) = 7.50E-05 4.00E-05 7.17E-05 4.00E-05 1.83E-05
H P PMn ( psi) (w(pcf) x HGravity (Corrected) (ft)/144(p
0.5
3
0.00
fracturas.
0.5 1.0 1.5 2.0 2.5 Q (l/min)
3.0 3.5 4.0 4.5 5.0