Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
_____________ is a manufacturing process for producing parts by injecting molten material into
a mould.
4. Blow Molding is the process of forming a __________ of thermoplastic material and placing it within
a mold cavity and inflating the tube with compressed air, to take the shape of the cavity and cool the
part before removing from the mold.
5. It involves a heated hollow mold which is filled with a charge or shot weight of material. It is then
slowly rotated causing the softened material to disperse and stick to the walls of the mold.
7. Is a material that has and ability to be molded and be shaped into anything by applying heat and
pressure.
11. It is used for all kinds of pipes and commonly found in plumbing industry.
13. is a process in which large hydrocarbon molecules are broken down into smaller and more useful
hydrocarbon monomer
14. process which monomers, combine chemically to produce a very large chainlike molecule called
polymer.
15. plastic resin are stores in silos then fed down to pipes to the heating chamber where mixed with
dyes and superheated to a temperature of about _____ TO _____.
16. the melted ABS is injeted into the mold that shaped like a hollow LEGO bricks. It requires high
pressure usually ________ pressure applied to make sure the bricks are shaped with perfect accuracy.
17. ______ is a place where the details such as number, words, faces, control panels and other
decorative parameters are stamped by a giant printer onto the LEGO bricks.
19. The most common plastic resin for lego manufacturing is the _______________.
1. Injection Molding
2. Pipes, hoses, drinking straws, curtain tracks, rods
3.
4. Preform
5. Rotational Molding
6. Additive Manufacturing Process
7. Plastic
8. Plasticity
14. polymerization
21. Sorting
22. Shredding
23. Washing
25. compounding/extruding