Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
MT2 MT2
REF REF
QII QI
IGT - + IGT
QIII QIV
MT2 MT2
REF REF
MT2 Negative
PHASE CONTROL The benefit of phase control is that the frequency of the
waveform providing power to the load is unchanged at
Figure 3 is also an example of phase control. Phase 60 Hz. This is necessary when dimming a light
control is one method for controlling the amount of because if the frequency were much less, flickers in the
power delivered to the load. Phase control works by light would be detectable by the human eye. The draw-
turning on a fraction of each half-wave, similar to pulse back to phase control is that switching the AC wave-
width modulating a digital signal. Current to the load is form in the manner described produces undesirable
proportional to the integral of each sine wave. This type electromagnetic interference (EMI). Care must be
of triac control is commonly used in light dimmers. The taken to prevent this EMI from radiating back onto the
light's brightness will be proportional to the area under line or affecting the triac circuit itself.
the curve.
IGT
t
HARDWARE
MOV
C1 R3 D1 C2
.047µ 3M 5.1V 470µ
N
R1 R2 D2
1K 5W 1K 5W
R7 47 R6
MT1 G
Q1 47 KΩ
R8 1K
TRC1
MT2 16A R9
400V
10K U1
RLOAD R11 470
13 GP0 GP3
1100W
LED1
GND VDD
R12 22K R13 1K
GP1 GP2
C6 C7
POT1 0.1µ D4 PIC10F204 0.1µ
3V
25K
VZX
5.1V
-0.6V
t
VLINE
3V
Setting 1
Setting 2
t
8.33 ms 3.54 ms
7.56 ms
VCC
R5
L
50
MOV
C1 R3 D1 C2 C3
.047µ 3M 5.1V 470µ 10µ
R4
N
R1 R2 D2 20
1K 5W 1K 5W
R7 47 R6 47K
MT1 G
Q1
R8 1K
TRC1
MT2 16A
R10 1.5K
400V R9
10K C4 C5
RLOAD 100n 3n
13 U1
1100W R11 470
GP0 GP3
LED1
GND VDD
R12 22K R13 1K
GP1 GP2
C6 C7
POT1 0.1µ D4
3V PIC10F204 0.1µ
25K
• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
• Microchip is willing to work with the customer who is concerned about the integrity of their code.
• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
09/27/04