Sei sulla pagina 1di 136

Product Data Sheet 00813-0100-4760, DS-4009

Diamond II+Annubar® Primary Flow Element


THE DIAMOND II+ANNUBAR® PRIMARY
FLOW ELEMENT HAS PROVEN TO BE
ACCURATE AND RELIABLE IN HUNDREDS
OF THOUSANDS OF APPLICATIONS.
ACCURATE
• Annubar primary flow element design
• Long-term accuracy
SENSIBLE
• Energy cost savings
• Low installation costs
ADAPTABLE
• No system shutdown
• Special materials

Diamond II+ Annubar®


• Gear drive
• Special flow element models and designs
• Pak–Lok®
• Elbow mounting
• Bi-directional flows
• Integral manifold head
• Integral valve head
• Integral temperature sensor

COMPLETE POINT SOLUTIONS™ We complement our field instruments with a wide


Complete Point Solutions provides fully engineered range of technologies; including, manifolds,
measurement solutions, combining best product and primary elements, process flanges and seals, and
practices for improved performance, reliability, temperature sensors and accessories.
and cost of ownership.
Complete Point Solutions is designed to provide you
The capability of the world’s finest industrial with Best-in-Class equipment — allowing you to
measurement instrumentation is further increased save on installation costs, and improve the reliability
by combining it with a premier offering of and capability of your process.
complimentary products. This system is engineered
Take advantage of our vast experience in process
and assembled by Rosemount Inc. to make it
measurement, and start improving your process
easy for you to specify and order the correct
with Complete Point Solutions.
equipment for your process measurement needs.

Flow-375
Diamond II+ Annubar®

Diamond II+Annubar
Primary Flow Element

D IAMOND II+ ANNUBAR PRIMARY FLOW ELEMENT - - - - - 379


D RAMATICALLY REDUCE INSTALLATION AND
O PERATING COSTS - - - - - - - - - - - - - - - - - - - - - - - - - - - 379
MOUNTING CONFIGURATIONS - - - - - - - - - - - - - - - - - - - - 379

D e sig n Pr in cip le s
D IFFERENTIAL PRESSURE
FLOW MEASUREMENT - - - - - - - - - - - - - - - - - - - - - - - - - 380
H OW IT WORKS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 380

Per fo rm a nc e
THE DIAMOND II+ SENSOR - - - - - - - - - - - - - - - - - - - - - - 382

B e ne fits
ENERGY SAVINGS - - - - - - - - - - - - - - - - - - - - - - - - - - - - 384
O PERATING COST SAVINGS - - - - - - - - - - - - - - - - - - - - - - 384
INSTALLATION COST SAVINGS - - - - - - - - - - - - - - - - - - - 384
Diamond II+ Annubar®

ELBOW-MOUNTED ANNUBAR
PRIMARY FLOW ELEMENT - - - - - - - - - - - - - - - - - - - - - - 385

F ea tu re s
D ESIGNED-IN A CCURACY - - - - - - - - - - - - - - - - - - - - - - - 386
ENERGY COST SAVINGS - - - - - - - - - - - - - - - - - - - - - - - - 386
INSTALLATION COST SAVINGS - - - - - - - - - - - - - - - - - - - 386
CHOOSE THE MODEL
ADAPTED FOR YOUR A PPLICATION - - - - - - - - - - - - - - - - 386
SPECIAL M ODELS AND DESIGNS - - - - - - - - - - - - - - - - - - 387

I n s tal l at i on
O RIENTATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 388
LOCATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 388

S i z i ng a nd H ow To Ord er
1. CHOOSE A MOUNTING METHOD - - - - - - - - - - - - - - - - - 389
2. CHOOSE A SENSOR SIZE - - - - - - - - - - - - - - - - - - - - - - 390
3. VERIFY MODEL AND SENSOR SIZE - - - - - - - - - - - - - - - 391
4. CHOOSE THE M ODEL OPTIONS - - - - - - - - - - - - - - - - - - 393
5. VERIFY PROCESS AND PIPE INFORMATION - - - - - - - - - - 394

O rde ri n g I n fo rm a ti o n— M o d el DC R
MODEL DCR+15S/16S - - - - - - - - - - - - - - - - - - - - - - - - 395
MODEL DCR+25S/26S - - - - - - - - - - - - - - - - - - - - - - - - 397
MODEL DCR+35S/36S - - - - - - - - - - - - - - - - - - - - - - - - 400
MODEL DCR+45S/46S - - - - - - - - - - - - - - - - - - - - - - - - 403

Flow-376
Rosemount Inc.

Diamond II+Annubar
Primary Flow Element

O rde ri n g I n fo rm a ti o n— M o d el DF F
MODEL DFF+15S/16S - - - - - - - - - - - - - - - - - - - - - - - - - 409
MODEL DFF+25S/26S - - - - - - - - - - - - - - - - - - - - - - - - - 411
MODEL DFF+25H/26H - - - - - - - - - - - - - - - - - - - - - - - - 414
MODEL DFF+25M/26M - - - - - - - - - - - - - - - - - - - - - - - - 417
MODEL DFF+35S/36S - - - - - - - - - - - - - - - - - - - - - - - - - 420
MODEL DFF+45S/46S - - - - - - - - - - - - - - - - - - - - - - - - - 423
MODEL DFF+45H/46H - - - - - - - - - - - - - - - - - - - - - - - - 426
MODEL DFF+45M/46M - - - - - - - - - - - - - - - - - - - - - - - - 428

O rde ri n g I n fo rm a ti o n— M o d el DP F
MODELS DPF+15S/16S - - - - - - - - - - - - - - - - - - - - - - - - 434
MODELS DPF+25S/26S - - - - - - - - - - - - - - - - - - - - - - - - 436
MODELS DPF+35S/36S - - - - - - - - - - - - - - - - - - - - - - - - 438
MODELS DPF+45S/46S - - - - - - - - - - - - - - - - - - - - - - - - 440

O rde ri n g I n fo rm a ti o n— M o d el DN T

Diamond II+ Annubar®


MODEL DNT+10S - - - - - - - - - - - - - - - - - - - - - - - - - - - - 446

O rde ri n g I n fo rm a ti o n— M o d el DN F
MODEL DNF+10S - - - - - - - - - - - - - - - - - - - - - - - - - - - - 447
MODEL DNF+10H - - - - - - - - - - - - - - - - - - - - - - - - - - - 449
MODEL DNF+10M - - - - - - - - - - - - - - - - - - - - - - - - - - - 450

O rde ri n g I n fo rm a ti o n— M o d el DN W
MODEL DNW+10S - - - - - - - - - - - - - - - - - - - - - - - - - - - 451

O rde ri n g I n fo rm a ti o n— M o d el DM T
MODEL DMT+15S - - - - - - - - - - - - - - - - - - - - - - - - - - - 456
MODEL DMT+25S - - - - - - - - - - - - - - - - - - - - - - - - - - - 458
MODEL DMT+35S - - - - - - - - - - - - - - - - - - - - - - - - - - - 461

O rde ri n g I n fo rm a ti o n— M o d el DH T
MODEL DHT+15S - - - - - - - - - - - - - - - - - - - - - - - - - - - - 469
MODEL DHT+25S - - - - - - - - - - - - - - - - - - - - - - - - - - - - 471
MODEL DHT+35S - - - - - - - - - - - - - - - - - - - - - - - - - - - - 474

O rde ri n g I n fo rm a ti o n— M o d el DH F
MODEL DHF+15S - - - - - - - - - - - - - - - - - - - - - - - - - - - - 482
MODEL DHF+25S - - - - - - - - - - - - - - - - - - - - - - - - - - - - 485
MODEL DHF+25H - - - - - - - - - - - - - - - - - - - - - - - - - - - 488
MODEL DHF + 25M - - - - - - - - - - - - - - - - - - - - - - - - - - 491
MODEL DHF+35S - - - - - - - - - - - - - - - - - - - - - - - - - - - - 494
MODEL DHF+45S - - - - - - - - - - - - - - - - - - - - - - - - - - - - 497
MODEL DHF+45H - - - - - - - - - - - - - - - - - - - - - - - - - - - 500

S p ec i fi c at i on s
FUNCTIONAL SPECIFICATIONS - - - - - - - - - - - - - - - - - - - - 509
PERFORMANCE SPECIFICATIONS - - - - - - - - - - - - - - - - - - - 509
PHYSICAL SPECIFICATIONS - - - - - - - - - - - - - - - - - - - - - - 510

Flow-377
Diamond II+ Annubar®
Diamond II+ Annubar®

Flow-378
Diamond II+
ANNUBAR®
Primary Flow
Element

Diamond II+ Annubar®


DIAMOND II+ANNUBAR DRAMATICALLY REDUCE MOUNTING
PRIMARY FLOW ELEMENT INSTALLATION AND CONFIGURATIONS
OPERATING COSTS
The Annubar® primary flow Fl o-Ta p ÿallows installation
element has proven to be The Annubar primary flow without system shutdown.
accurate and reliable in element is inherently easy
hundreds of thousands of and inexpensive to install. Pa k- Lo k ÿmounts safely
applications. The Diamond II+ The small size of the hole through a weld coupling
Annubar primary flow element required and the minimal and packing gland.
is designed to give the highest welding keep installation
performance of any differential costs low. Fl an g ed for high
pressure device. pressure applications.
The primary flow element
The flow element operates by offers little restriction to flow St re am li ne for large pipes
sensing an impact pressure and a which, in turn, minimizes and high velocity.
reference pressure through pressure drop. The resulting
multiple sensing ports connected energy and cost savings can
to dual averaging plenums. The positively impact your
resultant difference is a operating cost.
differential pressure signal.

Sensing ports are located on


both the up and downstream
sides of the flow element. The
number of ports is proportional
to the pipe diameter.

Diamond II+ Streamline Shape


Shape

FIGURE 1. Shape Cross-Sections.

Flow-379
Diamond II+ Annubar®

Design Principles
DIFFERENTIAL PRESSURE High Pressure Averaging
FLOW MEASUREMENT
The PH is produced by impact or stagnation of the
Flow devices producing a differential pressure signal— moving fluid on the sensor. The velocity profile
called DP devices—have a reputation for accuracy, results in a corresponding stagnation pressure
simplicity, and reliability. The traditional DP devices— profile. Multiple sensing ports, located on the front
orifice plate, venturi tube and flow nozzle, while meeting of the sensor, sense the impact pressure profile.
the above criteria—are expensive to install, limited in
application, and most are not energy efficient. Inside the high pressure chamber, the average
velocity pressure is maintained by the
The Diamond II+ sensor is a multiple-tube, rigid proportionality of the sensing port diameters to the
structure that provides dual averaging chambers chamber cross-sectional area.
with a diamond-shaped cross section (Figure 2) and
bi-directional flow sensing. Low Pressure Averaging
. As the fluid continues around the sensor, it
generates a vortex shedding pattern and creates a
PL profile. The PL is used as a pressure reference so
the velocity can be determined independent of pipe
static pressure. The PL is sensed by ports, located
downstream and opposite the high pressure ports.
FIGURE 2. Diamond II+ Sensor Design. Working on the same principle as the PH side, an
average PL is maintained in the low pressure
HOW IT WORKS
Diamond II+ Annubar®

chamber. This assures less dependence on the


magnitude of flow or Reynolds Number.
The Annubar primary flow element produces a DP
signal proportional to the square of the flow rate in
accordance with Bernoulli’s theorem. The DP signal
has two components: the high pressure (PH) and the
low pressure (PL) (Figure 3).

PH – PL = DP

FIGURE 3. PH(avg.) – PL(avg.) = DP (hw).

Flow-380
Rosemount Inc.

Sensing Ports vs. Pipe Size Diamond-Shaped Sensors—


the Key to Accuracy
Flow laboratory tests have shown that larger pipes
are more susceptible to dynamic distortions of the The diamond shape establishes a fixed separation
velocity profiles. These dynamic distortions can point of the fluid from the sensor (Figure 5). The
affect the stability and accuracy of the flow device. fixed separation point reduces changes in the
low, (or reference pressure), that would cause a
The Diamond II+ design is engineered so that the corresponding loss of accuracy in flow measurement.
number of sensing ports is a function of the pipe size
(Figure 4). Round Sensors
Round sensors have a variable separation point of
The additional sensing ports provide a larger sample the fluid from the sensor (Figure 5). The separation
of the velocity profile, giving a better average of the point varies with fluid type, velocity, surface
velocity profile. roughness of the sensor, and turbulence. Sensing
ports placed at angles greater than 30° from the
front of a round sensor will generate a reference or
Pipe Size Number of Ports Port Location
low pressure signal that is unpredictable—with
errors as high as 10%.
2 in. to 5 in. 4 Per Chebyshev
Calculus for
6 in. to 14 in. 6 averaging Fixed
Separation Point
16 in. to 72 8 or more
in.

TABLE 1. Sensing Ports vs. Pipe Size.

Diamond II+ Annubar®


72 in.
42 in.
24 in.
5 in.
½–2 in.

10 15/16
25/26
35/36
45/46

FIGURE 4. Sensing Ports. Variable Separation Point

FIGURE 5. Fixed vs. Variable Separation Point.

Flow-381
Diamond II+ Annubar®

Performance
THE DIAMOND II+ SENSOR The Diamond II+ Sensor
Extensive Testing—High Accuracy
Independent flow laboratories have tested and
proven the Diamond II+ Annubar primary flow Any DP device is only as accurate as its ability to
element’s accuracy. Calibration results for water repeat and maintain its flow coefficient (reproducing
flow at Alden (Alden Research Laboratory, Alden, the same coefficient within a respectable tolerance
Massachusetts), NEL (National Engineering for different fluids and piping systems). Dieterich
Laboratory, Scotland), and gases at CEESI (Colorado Standard, Inc. has completed extensive independent
Engineering Experimental Station Inc., Nunn, flow laboratory tests in a wide range of pipe sizes
Colorado) show conclusively that the Diamond II+ and fluids. Typical test results on liquids and highly
design improves performance and rangeability turbulent gas flows are shown below:
compared to traditional DP devices.

Accuracy: ±1% is maintained over a flow turndown


of 30:1, depending on the application

Repeatability: ±0.1%
Diamond II+ Annubar®

FIGURE 6. Dieterich Standard, Inc. Laboratory.

Sensor size: 10 Line size: 6 Sch 40 Bar # 100000pFluid: Water


Published K: 0.6392 Date: 10/13/97

FIGURE 7. CEESI Laboratory.

Flow-382
Rosemount Inc.

Round Sensors Annubar Primary Flow Element


Long–Term Accuracy
The simplest design for an averaging pitot is a round
cylinder. However, as the Reynolds number or flow Annubar primary flow element’s flow coefficient
rate increases, accuracy deteriorates because the remains stable over the long term and is unaffected
separation point of the fluid varies as it passes by wear and dirt or grease buildup.
around the cylinder. This causes a deviation between
actual and predicted performance and occurs Annubar Primary Flow Element vs. Orifice
regardless of the number or location of the sensing Any drift in the flow coefficient (K) results in
ports. Additionally, the level of pipeline turbulence reduced accuracy. A 10% shift in the K factor
affects the separation point, which makes the results in a 10% error in flow reading.
deviation impossible to predict.
The orifice long–term accuracy is significantly affected
Round sensor test results—variable turbulence levels by warping, wear, and dirt or grease buildup.
6" sch. 40 straight pipe –Butterfly valve–20 dia.

Lubricant—24% Warp—9% Wear—0.050-13% Dirt—11%

Welding
Icicles or
Sediment
Buildup—

Diamond II+ Annubar®


11%

Damage or Nicks—15%
Misalignment—3%

Independent tests by Florida Gas Transmission Company.


FIGURE 8. Round Sensors Test Data.
FIGURE 9. Comparison of Long Term Accuracy: Annubar
Primary Flow Element vs. Orifice.

Flow-383
Diamond II+ Annubar®

Benefits
ENERGY SAVINGS INSTALLATION COST SAVINGS
The non-constricting design of the Annubar Compared to any other primary flow element,
diamond-shaped sensor produces the lowest Annubar primary flow element has the lowest
permanent pressure loss of all primary flow sensors. installation cost.
The non-constricting design also results in
significant power savings. An orifice plate typically Annubar vs. Orifice Installation Costs
consumes more than 100 times the energy of an On an 8 inch (203 mm) pipe, an Annubar primary
Annubar primary flow element plate. flow element requires only 4 linear inches (101 mm)
of welding. An orifice plate installed in the same
pipe requires 50 linear inches (1270 mm) of welding
(Figure 13). Annubar primary flow element’s
Annubar
reduced welding requirement saves over ten
installation man-hours.

Orifice

FIGURE 10. The Annubar Plate vs. the Orifice Plate.


Diamond II+ Annubar®

OPERATING COST SAVINGS


Compare the orifice and Annubar operating costs.
Annubar primary flow element is 100 times more
efficient and can offer energy savings of $700 per
year per measurement point on liquids, and $30,000
per year savings on gases and steam.
FIGURE 12. Installation Cost Savings.

4 Linear Inches
β= 0.6
Actual D.P. produced

Welding (8″pipe)
Actual pressure loss
(inches of w.c.)

(inches of w.c.)

50 Linear Inches
Welding (8″pipe)

FIGURE 11. Operating Cost Savings.

Annubar primary flow element saves on installation costs—up to 10


man-hours less than orifice plate.

FIGURE 13. Welding Distances.

Flow-384
Rosemount Inc.

ELBOW-MOUNTED ANNUBAR Installation


PRIMARY FLOW ELEMENT The piping requirements for a ±3% accuracy
installation will vary based on the piping
Although a pipe elbow distorts fully developed flow, configuration ahead of the elbow.
it also acts as a flow conditioner, which results in a
predictable flow profile immediately downstream of To be consistent with straight-run requirement
the discharge of the elbow (Figure 14). charts, see the piping configurations in Figure 17.
The upstream straight-run requirements (L1) and
When an Annubar primary flow element is installed the downstream diameters (L2) are in terms of pipe
two pipe diameters downstream of the centerline of the inside diameters (D).
elbow (Figure 15), it will average the velocity profile Requirements for Successful Installation
and provide repeatable, predictable results. The key to • The elbow must have a short radius and be
accuracy is the prediction of the discharge coefficient, welded or flanged rather than threaded.
or K-value, in this elbow position.
• Refer to piping configurations below to verify
minimum diameters available.
Dieterich Standard, Inc. has done testing and
evaluation to predict this coefficient to within ±3%. • Mount the Diamond II+ two pipe inside
diameters from the center of upstream pipe,
and in-plane with the elbow (see Figure 16).
Either inside or outside radius mounting
will work, but the outside radius is preferred,
as this allows the higher velocity vectors
to be at the support point.

Non-Swirl Producing Swirl Producing

Diamond II+ Annubar®


Piping Min. Req. Piping
Configurations Values Configurations Min. Req. Values
L1 L2 L1 L1 L2
FIGURE 14. Flow Profiles Downstream of an Elbow. Without
Conditioner : 4
3 2 With 2
Conditioner: N/A

Without
Conditioner: 10
4 2 With 2
Conditioner: 5

FIGURE 15. Annubar Elbow Installation. Valve Use


Without
Conditioner
Dieterich Standard, Inc. can also perform the flow Full Open: 3
calculation for you and provide a computer printout. To 5 2 Control: 14
2
do so, specify EO (outside mount) or EI (inside mount), With Conditioner
along with the model callout and flow conditions. Full Open: 3
Control: 10
Valve Use Valve Use
Without
Full Open: Conditioner
3 Full Open: 5
Control: 16
Control: 2 2
10 With Conditioner
Full Open: 5
Control: 12

Valve Use

Full Open:
5
2
Diamond II+ Annubar primary flow element DCR shown Control:
12

FIGURE 16. Annubar Installation Recommendations.


FIGURE 17. Elbow–Mount Annubar Primary
Flow Element Piping Configurations.

Flow-385
Diamond II+ Annubar®

Features
DESIGNED-IN ACCURACY INSTALLATION COST SAVINGS
The Diamond Shape is Key Compared to any other primary flow element,
Annubar primary flow element has the lowest
The diamond shape establishes a fixed separation installation cost. Savings range from 25% on smaller
point of the fluid from the sensor (Figure 18). The pipes to 70% on larger pipes. See “Operating Cost
fixed separation point reduces changes in the low, or Savings” on page 384.
reference pressure that would cause a corresponding
loss of accuracy in flow measurement. Round CHOOSE THE MODEL
sensors have a variable separation point causing an ADAPTED FOR YOUR APPLICATION
unpredictable reference pressure, and can result in
flow measurement errors as high as 10%.
See “Design Principles” on page 380.
150# ANSI
Equivalent 600# ANSI
Fixed Separation Point Threaded Equivalent
Assy Flanged
Diamond II+ Annubar Assy
Primary Flow Element
Model Model Model
DMT DHT DHF
Round Sensor
600# ANSI Equivalent
Variable Separation Point Threaded Assy
Diamond II+ Annubar®

FIGURE 18. Fixed vs. Variable Separation Point. FIGURE 20. Three Model Options.

Long–Term Accuracy No System Shutdown


Annubar primary flow element is perfectly suited to
Dieterich Standard, Inc. has completed extensive retrofit applications because the Flo–Tap models can
independent flow laboratory tests in a wide range of be hot–tapped without interruption of the flow—that
pipe sizes and fluids that consistently demonstrates is, without system shutdown. Three Flo–Tap models
Annubar primary flow element’s superior ability to are available to meet your pressure requirements.
repeat and maintain its flow coefficient. A DP device See the Specification pages at the end of this section.
is only as accurate as its ability to do just that. See
“Performance” on page 382.
Install

• Alden Research Laboratory

• NEL, National Engineering Laboratory Drill Through


Inserted
Valve
• CEESI, Colorado Engineering Experimental
Station, Inc.

ENERGY COST SAVINGS


The non-constricting design of Annubar primary
flow element’s diamond-shaped sensor produces the
lowest permanent pressure loss of all primary flow FIGURE 21. Flo-Tap: No System Shutdown.
sensors. The low permanent pressure loss results in
significant power savings. See “Annubar vs. Orifice
Installation Costs” on page 384. Special Materials
Annubar primary flow elements are manufactured
from stainless steel or other special materials to
meet difficult applications for any industry. Special
materials include Kynar® (PVDF), Monel®,
Hastelloy®–C, Incoloy® 800 H, and HR 160.

FIGURE 19. Low Permanent Pressure Loss.

Flow-386
Rosemount Inc.

Optional Worm Gear Drive Elbow-Mounted Annubar


Primary Flow Element
An optional worm gear drive (Figure 22) saves time
because of a Single Point Drive system. The Single Insufficient straight run is common in today's piping,
Point Drive system enables an Annubar primary but Annubar primary flow element averages the flow
flow element to be inserted in a 30 inch (762 mm) profile so it can provide accurate, repeatable flow
pipe in only five minutes. The gear can be powered measurement when installed two diameters
in one of the following three ways: downstream of a 90° elbow.

• Hand crank Bi–Directional Flows


The symmetrical design, along with the controlled
• Heavy duty electric drill separation point provided by the exclusive diamond-
shaped sensor, means that a single Annubar primary
• Remote activated drive flow element is all that is required for bi-directional
flow measurement.
Integral Manifold Head
The integral manifold head provides a three valve
manifold built-in to the Annubar sensor (Figure 24).
Mount a DP transmitter to the Annubar sensor and
simplify installation.
FIGURE 22. Worm Gear Drive.
O–Ring Groove
SPECIAL MODELS AND DESIGNS

Diamond II+ Annubar®


A special Annubar sensor, MSL, handles high
velocity, high temperature, and high pressure flows
(up to 1015 °F/546 °C @ 2600 psig/17926 kPa). These FIGURE 24. Integral Manifold Head.
conditions are typical in a Main Steam Line from a
major power plant. Integral Valve Head
The integral valve head features a compact design
Annubar primary flow element systems have been that requires fewer tubing connections (Figure 25).
designed for Continuous Emission Rate Monitoring This means a more reliable, leak-free installation.
(CERM) applications on large diameter stacks. These Maintenance is also easier because seats can be
systems meet U.S. EPA 40CFR75 requirements such replaced without disassembling tubing. Integral
as purging and automatic daily calibration checks. valve heads are not recommended on Flo–Taps
DSF models are available for complete spanning of the above 400 °F (204 °C) or for steam applications.
diameter of the stack. For stacks exceeding 20 foot (6
meter) diameters, array models extending part way ½ in.—14 NPT
into the stack are available.
Pak-Lok Mounting Hardware
Safety is the key to the Dieterich Standard, Inc.
patented Pak–Lok mounting (Figure 23). Pak–Lok FIGURE 25. Integral Valve Head.
mounting seals and retains the sensor firmly against
the inside opposite wall simply and without high Integral Temperature Sensor
torque requirements. Unlike a ferrule-mounted Selected Annubar primary flow element models are
sensor, a Pak-Lok-mounted Annubar primary flow available with a “built-in” temperature sensor
element can be installed and removed easily. (Figure 26). This feature eliminates an additional
pipe connection and thermowell.

Pak–Lok Nut

Packing Follower
Welded
Packing Rings Lock Ring

Welded Fitting

FIGURE 23. Pak-Lok Mounting.


FIGURE 26. Integral Temperature Sensor.

Flow-387
Diamond II+ Annubar®

Installation
ORIENTATION Straight Run Requirements
Note: Other orientations are possible with Use of recommended straight pipe lengths of
additional considerations. uniform diameter upstream and downstream
ensures that flow measurement will be made in flow
Horizontal Pipes with fully developed characteristics.

The following chart describes the minimum number


of pipe diameters upstream and downstream of the
50° Annubar. Longer lengths are always preferred (if
50°
available) for accurate flow measurement.

Note: Straight runs listed below are for water.


Multiply times 1.5 for gases.
80° (Recommended zone)

FIGURE 27. Liquids and Steam. Upstream Dimensions

Minimum Without Vanes With Vanes Downstream


Diameters of Dimension
In Out A’ C C’
Straight Pipe
120°
Plane of
(Recommended Plan
zone) B
A eA
Diamond II+ Annubar®

8 10
4
30° 30° 8 4 4

FIGURE 28. Gases. 11 16


4
Vertical Pipes 8 4 4
Flow

23 28
4
8 4 4
360°

FIGURE 29. Liquids and Gases.


12 12
4
8 4 4

18 18
4
8 4 4

FIGURE 30. Steam.


30 30
LOCATION 8 4 4
4

Recommended Approach
and Depart Values
Selecting correct mounting locations for the
Annubar primary flow element in the pipeline is
important because disturbance in flow produced by
pipe layout may affect the accuracy of measurement. Installation
hole sizes 15 16 25 26 35 36 45 4

FIGURE 31. Installation Hole Sizes.

Flow-388
Rosemount Inc.

Sizing and How To Order


1. CHOOSE A MOUNTING METHOD
Line sizes 2 inches and larger
DCR DFF DPF

FIGURE 32. Regular Threaded FIGURE 33. Flanged. FIGURE 34. Flanged Pak–Lok.
Pak–Lok Assembly. Mounting Method: Flanged. Mounting Method: Flanged
Mounting Method: Threaded Pipe Sizes: 2 in. to 72 in. Pak–Lok.
Pak–Lok. (50 mm to 1800 mm). Pipe Sizes: 2 in. to 72 in.
Pipe Sizes: 2 in. to 72 in. (50 mm to 1800 mm).
(50 mm to 1800 mm).

Line sizes ½ in. to 2 in.

Diamond II+ Annubar®


DNT DNF DNW

FIGURE 35. Threaded In–Line. FIGURE 36. Flanged In–Line. FIGURE 37. Welded In–Line.
Mounting Method: Male Mounting Method: Flanged and Mounting Method: Welded
threaded. gasket. in-line.
Pipe Sizes: 0.5 in. to 2 in. Pipe Sizes: 0.5 in. to 2 in. Welded Pipe Sizes: 0.5 in. to 2 in.
(25 mm to 50 mm). (25 mm to 50 mm). (25 mm to 50 mm).

Flo-Tap Model 8
DMT DHT DHF

FIGURE 38. Medium Pressure FIGURE 39. High Pressure FIGURE 40. High Pressure
Threaded Flo–Tap. Threaded Flo–Tap. Flanged Flo–Tap.
Mounting Method: Threaded Mounting Method: Threaded Mounting Method: Flanged
Flo–Tap for pressure equivalent Flo–Tap for pressure equivalent Flo–Tap for pressure equivalent
to ANSI Class 150 Flanges. to ANSI Class 600 Flanges. to ANSI Class 600 Flanges.
Pipe Sizes: 2 in. to 72 in. Pipe Sizes: 2 in. to 72 in. Pipe Sizes: 2 in. to 72 in.
(50 mm to 1800 mm). (50 mm to 1800 mm). (50 mm to 1800 mm).

Flow-389
Diamond II+ Annubar®

2. CHOOSE A SENSOR SIZE


There are four Annubar primary flow element sensor sizes to choose from. The following table is a guideline
to help select the correct the sensor.

Sensor Size Line Sizes

15/16 2 in. to 5 in.

25/26 4 in. to 42 in.

35/36 8 in. to 72 in.

45/46 10 in. to 72 in.

TABLE 2. Sensor Size.

Using the smallest applicable sensor for a given line size is recommended. Use larger sensors where
structural integrity requires it. A complete calculation, including structural analysis, is completed for every
application using the Instrument Toolkit and/or Merlin software packages. Sensor 25/26 is preferred to sensor
15/16 in the 4-inch and 5-inch lines because the recommended product including integral transmitter
mounting and integral RTD are unavailable in sensor 15/16.

Calculate Approximate Differential Pressure (hw)


Use fluid parameters at maximum flow rate. To calculate the differential pressure, use the equations below,
Diamond II+ Annubar®

the Dieterich Standard, Inc. Annubar primary flow element sizing program, or the Annubar Primary Flow
Element Handbook.

Equations to Calculate Differential Pressure

Liquid, gas & steam (mass rate of flow)


ÿ ÿ= differential pressure, inches of water @ 68 ° F
1 lb m ⁄ hr 2 K = flow coefficient
h w = ----- ------------------------------
-
ρf 358.94KD
2 D= internal pipe diameter, inches

lbm / hr = pounds mass per hour


Liquid (volume rate of flow)
GPM = U.S. gallons per minute
2
( GPM ) ACFH = Actual cubic feet per hour
h w = ( G f ) --------------------------------
2 SCFH = Standard cubic feet per hour (@ 14.73 psia and 60° F)
( 5.666KD )
ρf = flowing density, lbm / ft3 for gas:

P
f
---------
- × 520
------- × 0.076487G
Gas (standard volumetric flow) 14.73 Tf

Tf G .076487 lbm / ft = Air density at 14.73 psia and 60 °F.


3
SCFH 2
h w = ---------- ----------------------------- Gf = Specific gravity of liquid
Pf 2
7, 711KD G = Specific gravity of gas (molecular weight of air = 28.9644)
T f = Temperature of flowing gas in degrees Rankin (°R = °F + 460)
ρf = Flowing pressure, psia
Gas (actual volume rate of flow)
K = 0.6 for approximate sizing
ACFH 2
h w = ( ρ f ) -------------------------------
2
358.94KD

Flow-390
Rosemount Inc.

3. VERIFY MODEL AND SENSOR SIZE


Compare maximum allowable flow to your maximum flow rates.

Nom. Sensor 10
Pipe
Size (in
DNT DNF DNW
inches)
SCFM HW GPM SCFM HW GPM SCFM HW GPM

.5 180.52 1500 50.943 180.52 1500 50.943 180.52 1500 50.943

.75 307.79 1500 89.404 307.79 1500 89.404 307.79 1500 89.404

1 498.82 1500 144.9 498.82 1500 144.9 498.82 1500 144.9

1.25 765.68 1180 222.41 765.68 1180 222.41 765.68 1180 222.41

1.5 902.04 884 262.02 902.04 884 262.02 902.04 884 262.02

2 1174.9 552 341.28 1174.9 552 341.28 1174.9 552 341.28

Sensor 15 Sensor 16
DCR DFF DHF† DPF DMT†/DHT† DCR DFF
SCFM HW GPM SCFM HW GPM SCFM HW GPM SCFM HW GPM SCFM HW GPM SCFM HW GPM SCFM HW GPM

2 1236.1 611 359.05 502.91 84.3 133.37 1555 967 451.7 1132.3 494 322.85 1324.9 702 384.87 1236.1 611 359.05 1322 699 384.04

2.5 1531.9 451 440.14 639.74 66.9 169.52 1886.4 699 547.95 1396 360 393.23 1623.9 518 471.7 1531.9 451 440.14 1641 529 476.68

3 2010.5 314 567.07 859.71 50.5 227.41 2408.7 478 699.65 1810.1 246 501.92 2127.9 360 607.18 2010.5 314 567.07 2175.3 380 623.82

3.5 2408.7 246 671.26 1046.1 41.7 276.37 2852.6 369 822.13 2158.9 192 593.03 2554 282 718.7 2408.7 246 671.26 2639.5 305 747.44

4 2816 199 777.38 1237.1 35.1 326.46 3331.3 294 944.89 2516 155 686.08 2989.7 228 832.1 2816 199 777.38 3126.9 253 876.53

Diamond II+ Annubar®


5 3723.8 137 1013.6 1663.7 25.6 438.17 4364.9 195 1209.3 3306.2 106 891.62 3950.9 156 1081.7 3723.8 137 1013.6 4213.3 180 1161.9

Sensor 25 Sensor 26

DCR DFF DHF† DPF DMT†/DHT† DCR DFF


SCFM HW GPM SCFM HW GPM SCFM HW GPM SCFM HW GPM SCFM HW GPM SCFM HW GPM SCFM HW GPM

4 6263.45 1090 1819.4 2827.2 189 757.59 7347.5 1500 2134.3 5621.4 878 1632.9 6892.6 1320 2002.1 6263.45 1090 1819.4 7047.5 1380 2047.1

5 8148.5 747 2366.9 3798.1 138 1017.3 10066 1140 2924 7290.6 598 2117.8 8929.2 897 2593.7 8148.5 747 2366.9 9366.4 987 2720.7

6 10088 549 2930.2 4839.5 107 1293.6 12299 816 3572.4 9117 439 2620.3 11019 655 3200.7 10088 549 2930.2 11783 749 3422.6

8 14100 346 4028.2 6867.4 71.2 1827.3 16486 489 4788.8 12849 277 3604.2 15029 406 4363.5 14100 346 4029.2 16570 494 4813.2

10 18737 235 5232.7 9125.3 50.2 2418.5 21270 318 6087.1 17067 190 4750.1 19910 271 5619.2 18737 235 5232.7 22053 348 6367.7

12 23218 174 6391.4 11299 38 2986.8 26142 228 7316.3 21180 142 5773.9 24588 198 6815 23218 174 6391.4 27773 263 7857.8

14 25971 147 7099.9 12665 32.6 3343.5 29131 190 8071.7 23752 121 6441.4 27511 167 7567.4 25971 147 7099.9 31411 226 8803.3

16 30390 116 8238.9 14829 26.1 3908.1 33874 147 9274.7 27865 96.3 7506.8 32028 130 8721.9 30390 116 8238.9 37265 182 10320

18 34880 94.2 9397.7 17017 21.4 4479.2 38584 117 10473 32060 78.8 8595.3 36692 105 9921.8 34880 94.2 9397.7 43086 149 11819

20 39558 77.7 10608 19311 17.8 5077.3 43384 94.5 11699 36469 65.5 9139.6 41459 85.8 11147 39558 77.7 10608 49210 124 13401

24 48768 55.7 12990 23901 13 6275.5 52897 66 14140 45250 47.7 12021 50822 60.7 13560 48768 55.7 12990 61463 90.6 16567

30 65577 35.6 17355 32211 8.43 8445.5 70325 41.1 18648 61287 31 16195 67950 38.3 18002 65577 35.6 17355 83933 59.3 22399

36 80406 25.2 21207 39598 6.03 1037.4 85555 28.6 22592 75714 22.3 19949 83023 26.9 21911 80406 25.2 21207 103900 42.6 27573

42 95305 18.8 25083 47023 4.53 12313 100650 21 26510 90424 16.9 23782 98014 19.9 25807 95305 18.8 25083 123750 32 32725

°
HW= maximum differential pressure in inches of water column Structural limits apply to 200 F and below.
SCFM = maximum air flow in standard cubic feet per minute For applications requiring higher values, consult factory
GPM = maximum water flow in gallons per minute 1.2 in. to 24 in. Sch 40
At standard conditions: air: 60 °F at 14.73 psia 30 in. to 42 in. Sch Std.
water: 60 ° F, specific gravity 1.0, viscosity 1.12 centipoise 48 in. to 72 in. Actual Id
† During insertion and retraction of Flo–Tap sensors, flow rate must be reduced to give lower DP values equal to the DP limits of DFF models of the same sensor size.

Flow-391
Diamond II+ Annubar®

Nom. Sensor 35 Sensor 36


Pipe
Size (in
DCR DFF DHF† DPF DMT†/DHT† DCR DFF
inches)
SCFM HW GPM SCFM HW GPM SCFM HW GPM SCFM HW GPM SCFM HW GPM SCFM HW GPM SCFM HW GPM

8 20661 768 6001.4 9950.2 153 2678.7 24501 1080 7116.8 18338 605 5326.6 22166 884 6438.7 20661 768 6001.4 24387 1070 7083.8

10 26823 521 7791.3 13239 108 3547.4 31224 706 9069.8 24088 414 6945.3 28592 592 8305.3 26823 521 7791.3 32204 751 9351.3

12 32883 385 9507.2 16469 82.3 4395.6 37485 505 10088 30074 309 8519.3 34710 433 10082 32833 385 9507.2 39824 570 11568

14 37058 327 10589 18488 70.7 4923.8 41364 421 12015 33895 264 9514.6 38729 365 11188 37058 327 10589 44625 490 12962

16 43668 258 12287 21690 56.7 5760.1 48040 325 13791 39957 210 11085 45595 286 12937 43668 258 12287 52273 394 15184

18 50338 209 13998 24947 46.6 6609.8 55095 258 15553 46180 172 12699 52469 230 14685 50338 209 13998 60481 324 17429

20 57299 172 15783 28344 38.8 7496.1 62559 210 17439 52719 143 14391 59608 188 16501 57299 172 15783 69596 270 19774

24 71017 123 19303 36548 28.3 9259.1 76801 146 21031 65702 104 17750 73609 133 20072 71017 123 19303 87930 198 24491

30 96282 78.9 25837 47441 18.4 12477 103040 91.1 27763 89649 67.9 23969 999349 84.3 26707 96282 78.9 25837 121480 130 33165

36 118650 56 31613 58452 13.2 15348 125830 63.3 33611 11250 49 29572 121960 59.3 32531 118650 56 31613 151120 93.2 40783

42 1411020 41.8 37402 69564 9.95 18248 148640 46.6 39491 133070 37.1 35237 144570 44 35374 141020 41.8 37402 181070 70.3 48505

48 163400 32.4 43205 80662 7.76 21144 171330 35.7 45353 155040 29.1 40946 167050 33.9 44194 163400 32.4 43205 211020 54.9 56240

60 208140 21.1 54825 102920 5.1 26954 216230 22.8 56991 199180 19.3 52434 211980 21.9 55855 208140 21.1 54825 270800 36.1 71712

72 253470 14.9 66623 125280 3.61 32793 261750 15.9 68822 243170 13.7 63883 256820 15.3 67511 253470 14.9 66623 330970 25.6 87327

Sensor 45 Sensor 46
DCR DFF DHF† DPF DMT†/DHT† DCR DFF
Diamond II+ Annubar®

SCFM HW GPM SCFM HW GPM SCFM HW GPM SCFM HW GPM SCFM HW GPM SCFM HW GPM SCFM HW GPM

10 41878 1270 12165 20133 256 5461.5 45513 1500 13220 37086 996 10713 N/A N/A N/A 41878 1270 12165 45513 1500 13220

12 51142 940 14855 24994 195 6766.1 59210 1260 17199 45499 744 13216 N/A N/A N/A 51142 940 14855 61288 1350 17803

14 56913 797 16532 28092 168 7590.1 65325 1050 18975 50681 635 14756 N/A N/A N/A 56913 797 16532 68661 1160 19944

16 66100 630 19200 33012 135 8888.1 74858 808 21744 59297 507 17224 N/A N/A N/A 66100 630 19200 80698 939 23441

18 75353 511 21888 38019 111 10201 84461 642 24534 68260 416 19749 N/A N/A N/A 75353 511 21888 92738 774 26938

20 85108 422 24722 43418 93.2 11618 94565 521 27469 78331 346 22385 N/A N/A N/A 85108 422 24722 105460 648 30634

24 106480 303 30297 53975 68.2 14374 114620 364 33207 98553 252 27630 N/A N/A N/A 106480 303 30291 130590 475 37933

30 146170 194 40515 73415 44.7 19448 156190 226 43729 136026 165 37364 N/A N/A N/A 146170 194 40515 178800 313 51462

36 181760 138 49627 90648 32.1 23938 192700 157 52933 169830 119 46084 N/A N/A N/A 181760 138 49627 226020 226 63508

42 217210 103 58712 108240 24.3 28517 229510 116 62307 204130 90.2 54943 N/A N/A N/A 217210 103 58712 273660 171 75649

48 251110 78.8 67379 125770 19 33086 265390 88.6 71446 238660 70.8 63867 N/A N/A N/A 251110 78.8 67379 321370 134 87865

60 321930 51.5 85653 160730 12.5 42190 337470 56.8 89952 308340 4701 81912 N/A N/A N/A 321930 51.5 85653 416410 88.4 112220

72 392880 36.3 103990 195900 8.86 51374 408770 39.4 108340 378250 33.6 100050 N/A N/A N/A 392880 36.3 103990 511830 62.8 136780

°
HW = hw = maximum differential pressure in inches of water column Structural limits apply to 200 F and below.
SCFM = maximum air flow in standard cubic feet per minute For applications requiring higher values, consult factory
GPM = maximum water flow in gallons per minute 1.2 in. to 24 in. Sch 40
At standard conditions: air: 60 °F at 14.73 psia 30 in. to 42 in. Sch Std.
water: 60 ° F, specific gravity 1.0, viscosity 1.12 centipoise 48 in. to 72 in. Actual Id
† During insertion and retraction of Flo–Tap sensors, flow rate must be reduced to give lower DP values equal to the DP limits of DFF models of the same sensor size.

Flow-392
Rosemount Inc.

4. CHOOSE THE MODEL OPTIONS

Model Numbers Description Page Numbers


Standard Models Line Sizes 2 Inches and Larger
DCR+15/16S Diamond II+ Annubar Primary Flow Element—Regular (Pak-Lok, Threaded), SST page 395
DCR+25/26S Diamond II+ Annubar Primary Flow Element—Regular (Pak-Lok, Threaded), SST page 397
DCR+35/36S Diamond II+ Annubar Primary Flow Element—Regular (Pak-Lok, Threaded), SST page 400
DCR+45/46S Diamond II+ Annubar Primary Flow Element—Regular (Pak-Lok, Threaded), SST page 403
DFF+15/16S Diamond II+ Annubar Primary Flow Element—Flanged, SST page 409
DFF+25/26S Diamond II+ Annubar Primary Flow Element—Flanged, SST page 411
DFF+25/26H Diamond II+ Annubar Primary Flow Element—Flanged, Hastelloy– C page 414
DFF+25/26M Diamond II+ Annubar Primary Flow Element—Flanged, Monel page 417
DFF+35/36S Diamond II+ Annubar Primary Flow Element—Flanged, SST page 420
DFF+45/46S Diamond II+ Annubar Primary Flow Element—Flanged, SST page 423
DFF+45/46H Diamond II+ Annubar Primary Flow Element—Flanged, Hastelloy– C page 426
DFF+45/46M Diamond II+ Annubar Primary Flow Element—Flanged, Monel page 428
DPF+15/16S Diamond II+ Annubar Primary Flow Element—Pak-Lok Flanged, SST page 434
DPF+25/26S Diamond II+ Annubar Primary Flow Element—Pak-Lok Flanged, SST page 436
DPF+35/36S Diamond II+ Annubar Primary Flow Element—Pak-Lok Flanged, SST page 438
DPF+45/46S Diamond II+ Annubar Primary Flow Element—Pak-Lok Flanged, SST page 440

Diamond II+ Annubar®


In–line sizes: ½ in. to 2 in.
DNT+10S Diamond II+ Annubar Primary Flow Element—In-Line Threaded, SST page 446
DNF+10S Diamond II+ Annubar Primary Flow Element—In-Line Flanged, SST page 447
DNF+10H Diamond II+ Annubar Primary Flow Element—n-Line Flanged, Hastelloy–C page 449
DNF+10M Diamond II+ Annubar Primary Flow Element—In-Line Flanged, Monel page 450
DNW+10S Diamond II+ Annubar Primary Flow Element—In-Line Butt Weld, SST page451
Flo–Tap Models
DMT+15S Diamond II+ Annubar Primary Flow Element—Threaded Flo-Tap, SST page 456
DMT+25S Diamond II+ Annubar Primary Flow Element—Threaded Flo-Tap, SST page 458
DMT+35S Diamond II+ Annubar Primary Flow Element—Threaded Flo-Tap, SST page 461
DHT+15S Diamond II+ Annubar Primary Flow Element—Threaded Flo-Tap, SST page 469
DHT+25S Diamond II+ Annubar Primary Flow Element—Threaded Flo-Tap, SST page 471
DHT+35S Diamond II+ Annubar Primary Flow Element—Threaded Flo-Tap, SST page 474
DHF+15S Diamond II+ Annubar Primary Flow Element—Flanged Flo-Tap, SST page 482
DHF+25S Diamond II+ Annubar Primary Flow Element—Flanged Flo-Tap, SST page 485
DHF+25H Diamond II+ Annubar Primary Flow Element—Flanged Flo-Tap, Hastelloy–C page 488
DHF+25M Diamond II+ Annubar Primary Flow Element—Flanged Flo-Tap, Monel page 491
DHF+35S Diamond II+ Annubar Primary Flow Element—Flanged Flo-Tap, SST page 494
DHF+45S Diamond II+ Annubar Primary Flow Element—Flanged Flo-Tap, SST page 497
DHF+45H Diamond II+ Annubar Primary Flow Element—Flanged Flo-Tap, Hastelloy–C page 500
DHF+45M Diamond II+ Annubar Primary Flow Element—Flanged Flo-Tap, Monel page 503

Flow-393
Diamond II+ Annubar®

5. VERIFY PROCESS AND PIPE INFORMATION

Configuration Information
When ordering an Annubar primary flow element, it is important to include all of the flowing conditions and
pipe information for your application. This will ensure that you receive the correct product for your
application. Please see the Annubar primary flow element Configuration Data Sheet 00806–0100–4760.

Dimension Codes
Certain dimensions are critical to fabrication of the primary flow element assembly. The following codes can
be specified in the model callout “string” and Dieterich Standard, Inc. will build the primary flow element
assembly to suit. If no dimension is specified, cataloged components will default to standard dimensions.
ODH ODV

ODH is the outside diameter of the pipe to the top of ODV is the outside diameter of the pipe to the top of
the Annubar primary flow element head (Figure 41). the isolation valve (Figure 43). ODV applies to
If this dimension is specified for a flanged, Flo–Tap, Flo–Tap models only, and only when the customer
or Regular model, the neck of the primary flow supplies some or all of the mounting hardware.
element just below standard dimension can be
considered a minimum. This dimension does not
apply to in–line sensors or to model 45s.

ODV
Diamond II+ Annubar®

ODH

FIGURE 43. ODV.


NL
FIGURE 41. ODH.
ODF NL is the nipple length for DNW, DNF, and DNT-10
in-line models (Figure 44). Additional length can be
ODF is the outside diameter of the pipe to the face of specified to fit specific piping configurations. The
the mounting flange (Figure 42). This dimension extra length will be applied upstream of the sensor
applies only to DFF, DHF, DSF, NFF, SPF, SFF, and unless otherwise specified.
SSF models. If Dieterich Standard, Inc. is not
supplying the mounting hardware, this dimension
must be specified. If Dieterich Standard, Inc. is
providing the mounting flange assembly, note
the following:

• The standard ODF is a minimum.

• The extensions must be at least 2 inches


FIGURE 44. NL.
longer than the minimum ODF.
CMH

CMH is the customer mount height distance from


ODF
the outside of the pipe to the top of the appropriately
sized NPT threaded female mounting coupling
(Figure 45). Supply these values for Regular and
Flo–Tap models that are being installed in a
FIGURE 42. ODF. customer’s mounting or saddle.

CMH

FIGURE 45. CMH.

Flow-394
Rosemount Inc.

Ordering Information—Model DCR


MODEL DCR+15S/16S
Model Product Description
DCR+15S Diamond II + Annubar® Primary Flow Element - Regular (Threaded, Pak-Lok)
DCR+16S Diamond II + Annubar® Primary Flow Element - Regular (Threaded, Pak-Lok) with Opposite Side Support, SST

Code Line Size


020 2 in. (50 mm)
025 21/2 in. (63.5 mm)
030 3 in. (80 mm)
035 31/2 in. (89 mm)
040 4 in. (100 mm)
050 5 in. (125 mm)

Code Head Style


Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Ports, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Ports, SST

Diamond II+ Annubar®


Code Instrument Connections
Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SP2C0 Needle Valve, Steam, 1/2—14 NPT, CS
Needle Valves - SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
CP2SS Needle Valve, Nipple, 1/2 in. Socket Weld Ports, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
CA2SS Needle Valve, Elbow, 1/2 in. Socket Weld Ports, SST
Gate Valves - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
Gate Valves - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Ports, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
Gate Valves - SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee,1/2 in. Socket Weld Ports, SST

Code Mounting Hardware


MP2C0 Pak-Lok, with Contoured Weld Fitting, 1/2—14 NPT, CS
MP2S0 Pak-Lok, with Contoured Weld Fitting, 1/2—14 NPT, SST
MR2C0 Pak-Lok, No Contoured Weld Fitting, 1/2—14 NPT, CS
MR2S0 Pak-Lok, No Contoured Weld Fitting, 1/2—14 NPT, SST

Flow-395
Diamond II+ Annubar®

MODEL DCR+15S/16S
Code Opposite Side Support (Required for Model 16S only)
MS2C0 Contoured Weld Fitting and Plug, 1—11.5 NPT, CS
MS2CW Contoured Weld Fitting and Plug, 1 in. Socket Weld Ports, CS
MS2S0 Contoured Weld Fitting and Plug, 1—11.5 NPT, SST
MS2SW Contoured Weld Fitting and Plug, 1 in. Socket Weld Ports, SST

Code Optional Auxiliary Mounting (Mounting alternatives for use when Contoured Weld Fitting is Not Specified in Mounting Hardware)

MT2C Contoured Weld Fitting, 1/2—14 NPT, CS


MT2S Contoured Weld Fitting, 1/2—14 NPT, SST
ME2C Weld Coupling, 1/2—14 NPT, CS
ME2A Weld Coupling, 1/2—14 NPT, Aluminum
ME2K Weld Coupling, 1/2—14 NPT, Copper
ME2P Weld Coupling, 1/2—14 NPT, PVC
ME2S Weld Coupling, 1/2—14 NPT, SST
NB20 Saddle, Double Strap, 2.35 to 2.56 O.D., 1/2—14 NPT, Iron
NC20 Saddle, Double Strap, 2.41 to 2.91 O.D., 1/2—14 NPT, Iron
ND20 Saddle, Double Strap, 2.97 to 3.54 O.D., 1/2—14 NPT, Iron
NE20 Saddle, Double Strap, 4.14 to 4.80 O.D., 1/2—14 NPT, Iron
NF20 Saddle, Double Strap, 5.94 to 6.70 O.D., 1/2—14 NPT, Iron

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly


S4 Factory Assembly of Rosemount DP Transmitter to DP Primary Element
Diamond II+ Annubar®

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration

Code Optional Quality Assurance


QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DCR+15S 020 HA2S0 CA2C0 MP2C0

Flow-396
Rosemount Inc.

MODEL DCR+25S/26S
Model Product Description
DCR+25S Diamond II + Annubar® Primary Flow Element - Regular (Threaded, Pak-Lok)
DCR+26S Diamond II + Annubar® Primary Flow Element - Regular (Threaded, Pak-Lok) with Opposite Side Support, SST

Code Line Size

040 4 in. (100 mm)


050 5 in. (125 mm)
060 6 in. (150mm)
080 8 in. (200 mm)
100 10 in. (250 mm)
120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
HAMS0 Integral, with 3-Valve Manifold, Horizontal Line, SST

Diamond II+ Annubar®


Direct and Integral Mount Heads - Horizontal Line with RTD
HATSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Horizontal Line, SST
HATSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Horizontal Line, SST
HATSD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, SST
HATS0 Integral, with 3-Valve Manifold, RTD, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, with 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, with 3-Valve Manifold, Vertical Line, SST
Direct and Integral Mount Heads - Vertical Line with RTD
HVTSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Vertical Line, SST
HVTSD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, SST
HVTSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Vertical Line, SST
HVTS0 Integral, with 3-Valve Manifold, RTD, Vertical Line, SST
Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Ports, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Ports, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS

Flow-397
Diamond II+ Annubar®

MODEL DCR+25S/26S
Code Instrument Connections (Continued)
Needle Valves - SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
CP2SS Needle valve, Nipple, 1/2 in. Socket Weld Ports, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
CA2SS Needle Valve, Elbow, 1/2 in. Socket Weld Ports, SST
Gate Valves - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
Gate Valves - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Ports, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Ports, SST

Code Mounting Hardware


Diamond II+ Annubar®

MR4C0 Pak-Lok, No Contoured Weld Fitting, 1—11.5 NPT, CS


MR4S0 Pak-Lok, No Contoured Weld Fitting, 1—11.5 NPT, SST
MP4C0 Pak-Lok, with Contoured Weld Fitting, 1—11.5 NPT, CS
MP4S0 Pak-Lok, with Contoured Weld Fitting, 1—11.5 NPT, SST

Code Opposite Side Support (Required for Model 26S only)


MS4C0 Contoured Weld Fitting and Plug, 1—11.5 NPT, CS
MS4CW Contoured Weld Fitting and Plug, 1 in. Socket Weld Ports, CS
MS4S0 Contoured Weld Fitting and Plug, 1—11.5 NPT, SST
MS4SW Contoured Weld Fitting and Plug, 1 in. Socket Weld Ports, SST

Code Optional Auxiliary Mounting (Mounting alternatives for use when Contoured Weld Fitting is Not Specified in Mounting Hardware)
MT4C Contoured Weld Fitting, 1—11.5 NPT, CS
MT4S Contoured Weld Fitting, 1—11.5 NPT, SST
ME4C Weld Coupling, 1—11.5 NPT, CS
ME4A Weld Coupling, 1—11.5 NPT, Aluminum
ME4K Weld Coupling, 1—11.5 NPT, Copper
ME4P Weld Coupling, 1—11.5 NPT, PVC
ME4S Weld Coupling, 1—11.5 NPT, SST
NE40 Saddle, Double Strap, 3.74 to 4.55 O.D., 1—11.5 NPT, Iron
NF40 Saddle, Double Strap, 5.94 to 6.7 O.D., 1—11.5 NPT, Iron
NG40 Saddle, Double Strap, 8.54 to 10.1 O.D., 1—11.5 NPT, Iron
NH40 Saddle, Double Strap,10.64 to 12.12 O.D., 1—11.5 NPT, Iron
NJ40 Saddle, Double Strap, 12.6 to 14.3 O.D., 1—11.5 NPT, Iron

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, FM Explosion-Proof, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly

S4 Factory Assembly of Rosemount DP Transmitter to DP Primary Element

Flow-398
Rosemount Inc.

MODEL DCR+25S/26S
Code Optional Calibration
M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Code Optional Quality Assurance

QA1 Dieterich Program


Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DCR+25S 040 HAMS0 C0000 MP4C0

Diamond II+ Annubar®

Flow-399
Diamond II+ Annubar®

MODEL DCR+35S/36S
Model Product Description
DCR+35S Diamond II + Annubar® Primary Flow Element - Regular (Threaded, Pak-Lok)
DCR+36S Diamond II + Annubar® Primary Flow Element - Regular (Threaded, Pak-Lok) with Opposite Side Support, SST

Code Line Size

080 8 in. (200 mm)


100 10 in. (250 mm)
120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)
480 48 in. (1210 mm)
600 60 in. 1520 mm)
720 72 in. (1820 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
HAMS0 Integral, with 3-Valve Manifold, Horizontal Line, SST
Diamond II+ Annubar®

Direct and Integral Mount Heads - Horizontal Line with RTD


HATSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Horizontal Line, SST
HATSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Horizontal Line, SST
HATSD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, SST
HATS0 Integral, with 3-Valve Manifold, RTD, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, with 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, with 3-Valve Manifold, Vertical Line, SST
Direct and Integral Mount Heads - Vertical Line with RTD
HVTSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Vertical Line, SST
HVTSD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, SST
HVTSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Vertical Line, SST
HVTS0 Integral, with 3-Valve Manifold, RTD, Vertical Line, SST
Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Ports, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Ports, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS

Flow-400
Rosemount Inc.

MODEL DCR+35S/36S
Code Instrument Connections (Continued)
Needle Valves - SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT,
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
CP2SS Needle valve, Nipple, 1/2 in. Socket Weld Ports, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
CA2SS Needle Valve, Elbow, 1/2 in. Socket Weld Ports, SST
Gate Valves - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
Gate Valves - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Ports, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Ports, SST

Code Mounting Hardware

Pak-Lok, with Contoured Weld Fitting, 11/2—11.5 NPT, CS

Diamond II+ Annubar®


MP6C0
MP6S0 Pak-Lok, with Contoured Weld Fitting, 11/2—11.5 NPT, SST
MR6C0 Pak-Lok, No Contoured Weld Fitting, 11/2—11.5 NPT, CS
MR6S0 Pak-Lok, No Contoured Weld Fitting, 11/2—11.5 NPT, SST

Code Opposite Side Support (Required for Model 36S only)


MS6C0 Contoured Weld Fitting and Plug, 1 1/2—11.5 NPT, CS
MS6CW Contoured Weld Fitting and Plug, 1 1/2 in. Socket Weld Ports, CS
MS6S0 Contoured Weld Fitting and Plug, 1 1/2—11.5 NPT, SST
MS6SW Contoured Weld Fitting and Plug, 1 1/2 in. Socket Weld Ports, SST

Code Optional Auxiliary Mounting (Mounting alternatives for use when Contoured Weld Fitting is Not Specified in Mounting Hardware)
MT6C Contoured Weld Fitting, 11/2—11.5 NPT, CS
MT6S Contoured Weld Fitting, 11/2—11.5 NPT, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, FM Explosion-Proof, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly

S4 Factory Assembly of Rosemount DP Transmitter to DP Primary Element

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Flow-401
Diamond II+ Annubar®

MODEL DCR+35S/36S
Code Optional Quality Assurance
QA1 Dieterich Program
QA2 Certified Program
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DCR+35S 120 HAMS0 C0000 MP6C0


Diamond II+ Annubar®

Flow-402
Rosemount Inc.

MODEL DCR+45S/46S
Model Product Description
DCR+45S Diamond II + Annubar® Primary Flow Element - Regular (Threaded, Pak-Lok)
DCR+46S Diamond II + Annubar® Primary Flow Element - Regular (Threaded, Pak-Lok) with Opposite Side Support, SST

Code Line Size

100 10 in. (250 mm)


120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)
480 48 in. (1210 mm)
600 60 in. 1520 mm)
720 72 in. (1820 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
HAMS0 Integral, with 3-Valve Manifold, Horizontal Line, SST

Diamond II+ Annubar®


Direct and Integral Mount Heads - Horizontal Line with RTD
HATSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Horizontal Line, SST
HATSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Horizontal Line, SST
HATSD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, SST
HATS0 Integral, with 3-Valve Manifold, RTD, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, with 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, with 3-Valve Manifold, Vertical Line, SST
Direct and Integral Mount Heads - Vertical Line with RTD
HVTSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Vertical Line, SST
HVTSD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, SST
HVTSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Vertical Line, SST
HVTS0 Integral, with 3-Valve Manifold, RTD, Vertical Line, SST
Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Ports, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Ports, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS
Needle Valves - SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
CP2SS Needle valve, Nipple,1/2 in. Socket Weld Ports, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in. Socket Weld Ports, SST

Flow-403
Diamond II+ Annubar®

MODEL DCR+45S/46S
Code Instrument Connections (Continued)
Gate Valves - CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
Gate Valves - SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow,1/2 in. Socket Weld Ports, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Ports, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee,1/2 in. Socket Weld Ports, SST

Code Mounting Hardware


MPDC0 Pak-Lok, with Contoured Weld Fitting, 3—8 NPT, CS
MPDS0 Pak-Lok, with Contoured Weld Fitting, 3—8 NPT, SST

Code Opposite Side Support (Required for Model 46S only)

MSDCW Contoured Weld Fitting and Cap, 3 in., Butt Weld, CS


MSDSW Contoured Weld Fitting and Cap, 3 in., Butt Weld, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, FM Explosion-Proof, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel
Diamond II+ Annubar®

TRR Remote Thermowell and RTD


TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly


S4 Factory Assembly of Rosemount DP Transmitter to DP Primary Element

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Code Optional Quality Assurance


QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DCR+45S 200 HAMS0 C0000 MPDC0

Flow-404
Rosemount Inc.

Diamond II+ Annubar®

Flow-405
Diamond II+ Annubar®
Diamond II+ Annubar®

Flow-406
Rosemount Inc.

Diamond II+ Annubar®

Flow-407
Diamond II+ Annubar®
Diamond II+ Annubar®

Flow-408
Rosemount Inc.

Ordering Information—Model DFF


MODEL DFF+15S/16S
Model Product Description
DFF+15S Diamond II+ Annubar® Primary Flow Element - Flanged, SST
DFF+16S Diamond II+ Annubar® Primary Flow Element - Flanged with Opposite Side Support, SST

Code Line Size


020 2 in. (50 mm)
025 2½ in. (63.5 mm)
030 3 in. (80 mm)
035 3½ in. (89 mm)
040 4 in. (100 mm)
050 5 in. (125 mm)

Code Head Style


Direct Mount - Horizontal
HAMS0 Integral, 3-Valve Manifold, Horizontal Line, SST
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
Direct Mount - Vertical
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, 3-Valve Manifold, Vertical Line, SST
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, 5-Valve Manifold, B31.1, Vertical Line, SST

Diamond II+ Annubar®


HVDSN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, SST
Remote Mount - Horizontal
HA2S0 Axial, Horizontal Line, ½—14 NPT, SST
HA2SS Axial, Horizontal Line, ½ in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, ½—14 NPT, SST
HP2SS Parallel, Horizontal Line, ½ in. Socket Weld Ports, SST
HAHS0 Axial, HP, Horizontal Line, ½—14 NPT, SST
HAHSS Axial, HP, Horizontal Line, ½ in. Socket Weld Ports, SST
Remote Mount - Vertical
HPVS0 Parallel, Vertical Line, ½ in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, ½—14 NPT, SST
HV2S0 Axial, Vertical Line, ½—14 NPT, SST
HV2SS Axial, Vertical Line, ½ in. Socket Weld Ports, SST
HVHS0 Axial, HP, Vertical Line, ½—14 NPT, SST
HVHSS Axial, HP, Vertical Line, ½ in. Socket Weld Ports, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CA2C0 Needle Valve, Elbow, ½—14 NPT, CS
CP2C0 Needle Valve, Nipple, ½—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, ½—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, ½—14 NPT, CS
Needle Valves - SST
CA2S0 Needle Valve, Elbow, ½—14 NPT, SST
CA2SS Needle Valve, Elbow, ½ in. Socket Weld Ports, SST
CP2S0 Needle Valve, Nipple, ½—14 NPT, SST
CP2SS Needle Valve, Nipple, ½ in. Socket Weld Ports, SST
SA2S0 Needle Valve, Elbow and Tee, ½—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, ½—14 NPT, SST
SP2SS Needle Valve, Nipple and Tee, ½ in. Socket Weld Ports, SST
Gate Valves - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, ½—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, ½—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, ½—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, ½—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½—14 NPT, CS

Flow-409
Diamond II+ Annubar®

MODEL DFF+15S/16S
Code Instrument Connections (Continued)
Gate Valves - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, ½—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, ½ in. Socket Weld Ports, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, ½—14 NPT, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, ½ in. Socket Weld Ports, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, ½—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, ½—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½—14 NPT, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½ in. Socket Weld Ports, SST

Code Sensor Flange


FNMS0 DIN 25 PN 100, 316 SST
FLMS0 DIN 25 PN 40, 316 SST
FJMS0 DIN 25 PN 16, 316 SST
FF4S0 1 in. ANSI Class 2500, RF, SST
FE4S0 1 in. ANSI Class 900/1500, RF, SST
FC4S0 1 in. ANSI Class 600, RF, SST
FB4S0 1 in. ANSI Class 300, RF, SST
FA4S0 1 in. ANSI Class 150, RF, SST

Code Flanged Mount


FA4C 1 in. ANSI Class 150, Weld-Neck RF, CS
FA4S 1 in. ANSI Class 150, Weld-Neck RF, SST
FB4C 1 in. ANSI Class 300, Weld-Neck RF, CS
FB4S 1 in. ANSI Class 300, Weld-Neck RF, SST
FC4C 1 in. ANSI Class 600, Weld-Neck RF, CS
Diamond II+ Annubar®

FC4S 1 in. ANSI Class 600, Weld-Neck RF, SST


FE4C 1 in. ANSI Class 900/1500, Weld-Neck RF, CS
FE4S 1 in. ANSI Class 900/1500, Weld-Neck RF, SST
FF4C 1 in. ANSI Class 2500, Weld-Neck RF, CS
FF4S 1 in. ANSI Class 2500, Weld-Neck RF, SST
FJMC DIN 25 PN 16, CS
FJMS DIN 25 PN 16, 316 SST
FLMC DIN 25 PN 40, CS
FLMS DIN 25 PN 40, 316 SST
FNMC DIN 25 PN 100, CS
FNMS DIN 25 PN 100, 316 SST

Code Opposite Side Support (Required for Model 16S only)

MS2C0 Contoured Weld Fitting and Plug, ½—14 NPT, CS


MS2CW Contoured Weld Fitting and Plug, ½ in. Socket Weld Ports, CS
MS2S0 Contoured Weld Fitting and Plug, ½—14 NPT, SST
MS2SW Contoured Weld Fitting and Plug, ½ in. Socket Weld Ports, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly


S4 Factory Assembly of Rosemount DP Transmitter to DP Primary Element

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration

Code Optional Quality Assurance


QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DFF+15S 020 HAMS0 C0000 FA4S0 FA4C

Flow-410
Rosemount Inc.

MODEL DFF+25S/26S
Model Product Description
DFF+25S Diamond II + Annubar® Primary Flow Element - Flanged, SST
DFF+26S Diamond II + Annubar® Primary Flow Element - Flanged with Opposite Side Support, SST

Code Line Size

040 4 in. (100 mm)


050 5 in. (125 mm)
060 6 in. (150 mm)
080 8 in. (200 mm)
100 10 in. (250 mm)
120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HAMS0 Integral, 3-Valve Manifold, Horizontal Line, SST
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST

Diamond II+ Annubar®


HAXS0 Direct Mount, Quantity Two, 3-Valve Manifold, Horizontal Line, SST
Direct and Integral Mount Heads - Horizontal Line with RTD
HATSN Direct Mount, 5-Valve Manifold, RTD, NACE, Horizontal Line, SST
HATS0 Integral, 3-Valve Manifold, RTD, Horizontal Line, SST
HATSB Direct Mount, 5-Valve Manifold, RTD, B31.1, Horizontal Line, SST
HATSD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, 3-Valve Manifold, Vertical Line, SST
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, SST
Direct and Integral Mount Heads - Vertical Line with RTD
HVTS0 Integral, 3-Valve Manifold, RTD, Vertical Line, SST
HVTSB Direct Mount, 5-Valve Manifold, RTD, B31.1, Vertical Line, SST
HVTSD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, SST
HVTSN Direct Mount, 5-Valve Manifold, RTD, NACE, Vertical Line, SST
Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, ½—14 NPT, SST
HA2SS Axial, Horizontal Line, ½ in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, ½—14 NPT, SST
HP2SS Parallel, Horizontal Line, ½ in. Socket Weld Ports, SST
HAHS0 Axial, HP, Horizontal Line, ½—14 NPT, SST
HAHSS Axial, HP, Horizontal Line, ½ in. Socket Weld Ports, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, ½ in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, ½—14 NPT, SST
HV2S0 Axial, Vertical Line, ½—14 NPT, SST
HV2SS Axial, Vertical Line, ½ in. Socket Weld Ports, SST
HVHS0 Axial, HP, Vertical Line, ½—14 NPT, SST
HVHSS Axial, HP, Vertical Line, ½ in. Socket Weld Ports, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CA2C0 Needle Valve, Elbow, ½—14 NPT, CS
CP2C0 Needle Valve, Nipple, ½—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, ½—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, ½—14 NPT, CS

Flow-411
Diamond II+ Annubar®

MODEL DFF+25S/26S
Code Instrument Connections (Continued)
Needle Valves - SST
CA2S0 Needle Valve, Elbow, ½—14 NPT, SST
CA2SS Needle Valve, Elbow, ½ in. Socket Weld Ports, SST
CP2S0 Needle Valve, Nipple, ½—14 NPT, SST
CP2SS Needle Valve, Nipple, ½ in. Socket Weld Ports, SST
SA2S0 Needle Valve, Elbow and Tee, ½—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, ½—14 NPT, SST
SP2SS Needle Valve, Nipple and Tee, ½ in. Socket Weld Ports, SST
Gate Valves - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, ½—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, ½—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, ½—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, ½—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½—14 NPT, CS
Gate Valves - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, ½—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, ½ in. Socket Weld Ports, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, ½—14 NPT, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, ½ in. Socket Weld Ports, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, ½—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, ½—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½—14 NPT, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½ in. Socket Weld Ports, SST

Code Sensor Flange


Diamond II+ Annubar®

FNPS0 DIN 40 PN 100, 316 SST


FLPS0 DIN 40 PN 40, 316 SST
FJPS0 DIN 40 PN 16, 316 SST
FF8S0 2 in. ANSI Class 2500, RF, SST
FE8S0 2 in. ANSI Class 900/1500, RF, SST
FC6S0 1½ in. ANSI Class 600, RF, SST
FB6S0 1½ in. ANSI Class 300, RF, SST
FA6S0 1½ in. ANSI Class 150, RF, SST

Code Flanged Mount


FA6C 1½ in. ANSI Class 150, Weld-Neck RF, CS
FA6S 1½ in. ANSI Class 150, Weld-Neck RF, SST
FB6C 1½ in. ANSI Class 300, Weld-Neck RF, CS
FB6S 1½ in. ANSI Class 300, Weld-Neck RF, SST
FC6C 1½ in. ANSI Class 600, Weld-Neck RF, CS
FC6S 1½ in. ANSI Class 600, Weld-Neck RF, SST
FE8C 2 in. ANSI Class 900/1500,Weld-Neck RF, CS
FE8S 2 in. ANSI Class 1500, Weld-Neck RF, SST
FJPC DIN 40 PN 16, CS
FJPS DIN 40 PN 16, 316 SST
FLPC DIN 40 PN 40, CS
FLPS DIN 40 PN 40, 316 SST
FNPC DIN 40 PN 100, CS
FNPS DIN 40 PN 100, 316 SST

Code Opposite Side Support (Required for Model 26S only)


MS4C0 Contoured Weld Fitting and Plug, 1—11.5 NPT, CS
MS4CW Contoured Weld Fitting and Plug, 1 in. Socket Weld Ports, CS
MS4S0 Contoured Weld Fitting and Plug, 1—11.5 NPT, SST
MS4SW Contoured Weld Fitting and Plug, 1 in. Socket Weld Ports, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, Explosion, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Flow-412
Rosemount Inc.

MODEL DFF+25S/26S
Code Optional Special Assembly
S4 Factory Assembly of Rosemount DP Transmitter to DP Primary Element

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Code Optional Quality Assurance


QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DFF+25S 040 HAMS0 C0000 FA6S0 FA6C

Diamond II+ Annubar®

Flow-413
Diamond II+ Annubar®

MODEL DFF+25H/26H
Model Product Description
DFF+25H Diamond II + Annubar® Primary Flow Element - Flanged, Hastelloy-C
DFF+26H Diamond II + Annubar® Primary Flow Element - Flanged with Opposite Side Support, Hastelloy-C

Code Line Size

040 4 in. (100 mm)


050 5 in. (125 mm)
060 6 in. (150 mm)
080 8 in. (200 mm)
100 10 in. (250 mm)
120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HADH0 Direct Mount, with 5-Valve Manifold, Horizontal Line, Hastelloy-C
HADHB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, Hastelloy-C
HADHN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, Hastelloy-C
HAMH0 Integral, 3-Valve Manifold, Horizontal Line, Hastelloy-C
HAPH0 Direct Mount, No Manifold, Horizontal Line, Hastelloy-C
Diamond II+ Annubar®

Direct and Integral Mount Heads - Horizontal Line with RTD


HATH0 Integral, 3-Valve Manifold, RTD, Horizontal Line, Hastelloy-C
HATHD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, Hastelloy-C
HATHN Direct Mount, 5-Valve Manifold, RTD, NACE, Horizontal Line, Hastelloy-C
HATHB Direct Mount, 5-Valve Manifold, RTD, B31.1, Horizontal Line, Hastelloy-C
Direct and Integral Mount Heads - Vertical Line
HVMH0 Integral, 3-Valve Manifold, Vertical Line, Hastelloy-C
HVDH0 Direct Mount, with 5-Valve Manifold, Vertical Line, Hastelloy-C
HVDHB Direct Mount, 5-Valve Manifold, B31.1, Vertical Line, Hastelloy-C
HVDHN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, Hastelloy-C
HVPH0 Direct Mount, No Manifold, Vertical Line, Hastelloy-C
Direct and Integral Mount Heads - Vertical Line with RTD
HVTH0 Integral, 3-Valve Manifold, RTD, Vertical Line, Hastelloy-C
HVTHB Direct Mount, 5-Valve Manifold, RTD, B31.1, Vertical Line, Hastelloy-C
HVTHD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, Hastelloy-C
HVTHN Direct Mount, 5-Valve Manifold, RTD, NACE, Vertical Line, Hastelloy-C
Remote Mount - Horizontal Line
HA2H0 Axial, Horizontal Line, ½—14 NPT, Hastelloy-C
HA2HS Axial, Horizontal Line, ½ in. Socket Weld Ports, Hastelloy-C
HP2H0 Parallel, Horizontal Line, ½—14 NPT, Hastelloy-C
HAHH0 Axial, HP, Horizontal Line, ½—14 NPT, Hastelloy-C
HAHHS Axial, HP, Horizontal Line, ½ in. Socket Weld Ports, Hastelloy-C
Remote Mount - Vertical Line
HPVH0 Parallel, Vertical Line, ½—14 NPT, Hastelloy-C
HV2H0 Axial, Vertical Line, ½—14 NPT, Hastelloy-C
HVHH0 Axial, HP, Vertical Line, ½—14 NPT, Hastelloy-C
HVHHS Axial, HP, Vertical Line, ½ in. Socket Weld Ports, Hastelloy-C

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CA2C0 Needle Valve, Elbow, ½—14 NPT, CS
CP2C0 Needle Valve, Nipple, ½—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, ½—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, ½—14 NPT, CS

Flow-414
Rosemount Inc.

MODEL DFF+25H/26H
Code Instrument Connections (Continued)
Needle Valves - SST
CA2S0 Needle Valve, Elbow, ½—14 NPT, SST
CP2S0 Needle Valve, Nipple, ½—14 NPT, SST
SA2S0 Needle Valve, Elbow and Tee, ½—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, ½—14 NPT, SST
Needle Valves - Hastelloy-C
CA2H0 Needle Valve, Elbow, ½—14 NPT, Hastelloy-C
CP2H0 Needle Valve, Nipple, ½—14 NPT, Hastelloy-C
Gate Valves - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, ½—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, ½—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, ½—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, ½—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½—14 NPT, CS
Gate Valves - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, ½—14 NPT, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, ½—14 NPT, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, ½—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, ½—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½—14 NPT, SST

Code Sensor Flange


FF8H0 2 in. ANSI Class 2500, RF, Hastelloy-C
FE8H0 2 in. ANSI Class 900/1500, RF, Hastelloy-C
FC6H0 1½ in. ANSI Class 600, RF, Hastelloy-C

Diamond II+ Annubar®


FB6H0 1½ in. ANSI Class 300, RF, Hastelloy-C
FA6H0 1½ in. ANSI Class 150, RF, Hastelloy-C

Code Flanged Mount


FA6C 1½ in. ANSI Class 150, Weld-Neck RF, CS
FA6S 1½ in. ANSI Class 150, Weld-Neck RF, SST
FB6C 1½ in. ANSI Class 300, Weld-Neck RF, CS
FB6S 1½ in. ANSI Class 300, Weld-Neck RF, SST
FC6C 1½ in. ANSI Class 600, Weld-Neck RF, CS
FC6S 1½ in. ANSI Class 600, Weld-Neck RF, SST
FE8C 2 in. ANSI Class 900/1500, Weld-Neck RF, CS
FE8S 2 in. ANSI Class 1500, Weld-Neck RF, SST

Code Opposite Side Support (Required for Model 26H only)


MS4C0 Contoured Weld Fitting and Plug, 1—11.5 NPT, CS
MS4CW Contoured Weld Fitting and Plug, 1 in. Socket Weld Ports, CS
MS4S0 Contoured Weld Fitting and Plug, 1—11.5 NPT, SST
MS4SW Contoured Weld Fitting and Plug, 1 in. Socket Weld Ports, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)

TRA Integral RTD, Axial Head


TRP Integral RTD, Parallel Head
TXA Integral RTD, Explosion, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly


S4 Factory Assembly of Rosemount DP Transmitter to DP Primary Element

Code Optional Calibration

M Lab Flow Calibration (Average K) (<10 in.)


Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Flow-415
Diamond II+ Annubar®

MODEL DFF+25H/26H
Code Optional Quality Assurance
QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DFF+25H 040 HAMH0 C0000 FA6H0 FA6C


Diamond II+ Annubar®

Flow-416
Rosemount Inc.

MODEL DFF+25M/26M
Model Product Description
DFF+25M Diamond II + Annubar® Primary Flow Element - Flanged, Monel
DFF+26M Diamond II + Annubar® Primary Flow Element - Flanged with Opposite Side Support, Monel

Code Line Size

040 4 in. (100 mm)


050 5 in. (125 mm)
060 6 in. (150 mm)
080 8 in. (200 mm)
100 10 in. (250 mm)
120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HADM0 Direct Mount, with 5-Valve Manifold, Horizontal Line, Monel
HADMB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, Monel
HADMN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, Monel
HAMM0 Integral, 3-Valve Manifold, Horizontal Line, Monel
HAPM0 Direct Mount, No Manifold, Horizontal Line, Monel

Diamond II+ Annubar®


Direct and Integral Mount Heads - Horizontal Line with RTD
HATM0 Integral, 3-Valve Manifold, RTD, Horizontal Line, Monel
HATMD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, Monel
HATMN Direct Mount, 5-Valve Manifold, RTD, NACE, Horizontal Line, Monel
HATMB Direct Mount, 5-Valve Manifold, RTD, B31.1, Horizontal Line, Monel
Direct and Integral Mount Heads - Vertical Line
HVMM0 Integral, 3-Valve Manifold, Vertical Line, Monel
HVDM0 Direct Mount, with 5-Valve Manifold, Vertical Line, Monel
HVDMB Direct Mount, 5-Valve Manifold, B31.1, Vertical Line, Monel
HVDMN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, Monel
HVPM0 Direct Mount, No Manifold, Vertical Line, Monel
Direct and Integral Mount Heads - Vertical Line with RTD
HVTM0 Integral, 3-Valve Manifold, RTD, Vertical Line, Monel
HVTMB Direct Mount, 5-Valve Manifold, RTD, B31.1, Vertical Line, Monel
HVTMD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, Monel
HVTMN Direct Mount, 5-Valve Manifold, RTD, NACE, Vertical Line, Monel
Remote Mount - Horizontal Line
HA2M0 Axial, Horizontal Line, ½—14 NPT, Monel
HA2MS Axial, Horizontal Line, ½ in. Socket Weld Ports, Monel
HP2M0 Parallel, Horizontal Line, ½—14 NPT, Monel
HAHM0 Axial, HP, Horizontal Line, ½—14 NPT, Monel
HAHMS Axial, HP, Horizontal Line, ½ in. Socket Weld Ports, Monel
Remote Mount - Vertical Line
HPVM0 Parallel, Vertical Line, ½—14 NPT, Monel
HVHM0 Axial, HP, Vertical Line, ½—14 NPT, Monel
HVHMS Axial, HP, Vertical Line, ½ in. Socket Weld Ports, Monel
HV2MO Axial, Vertical Line, ½—14 NPT, Monel
HV2MS Axial, Vertical Line, ½ in. Socket Weld Ports, Monel

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CA2C0 Needle Valve, Elbow, ½—14 NPT, CS
CP2C0 Needle Valve, Nipple, ½—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, ½—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, ½—14 NPT, CS

Flow-417
Diamond II+ Annubar®

MODEL DFF+25M/26M
Code Instrument Connections (Continued)
Needle Valves - SST
CA2S0 Needle Valve, Elbow, ½—14 NPT, SST
CP2S0 Needle Valve, Nipple, ½—14 NPT, SST
SA2S0 Needle Valve, Elbow and Tee, ½—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, ½—14 NPT, SST
Needle Valves - Monel
CA2M0 Needle Valve, Elbow, ½—14 NPT, Monel
CP2M0 Needle Valve, Nipple, ½—14 NPT, Monel
Gate Valves - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, ½—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, ½—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, ½—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, ½—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½—14 NPT, CS
Gate Valves - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, ½—14 NPT, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, ½—14 NPT, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, ½—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, ½—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½—14 NPT, SST

Code Sensor Flange


FE8M0 2 in. ANSI Class 900/1500, RF, Monel
FF8M0 2 in. ANSI Class 2500, RF, Monel
FC6M0 1½ in. ANSI Class 600, RF, Monel
Diamond II+ Annubar®

FB6M0 1½ in. ANSI Class 300, RF, Monel


FA6M0 1½ in. ANSI Class 150, RF, Monel

Code Flanged Mount


FA6C 1½ in. ANSI Class 150, Weld-Neck RF, CS
FA6S 1½ in. ANSI Class 150, Weld-Neck RF, SST
FB6C 1½ in. ANSI Class 300, Weld-Neck RF, CS
FB6S 1½ in. ANSI Class 300, Weld-Neck RF, SST
FC6C 1½ in. ANSI Class 600, Weld-Neck RF, CS
FC6S 1½ in. ANSI Class 600, Weld-Neck RF, SST
FE8C 2 in. ANSI Class 900/1500, Weld-Neck RF, CS
FE8S 2 in. ANSI Class 1500, Weld-Neck RF, SST

Code Opposite Side Support (Required for Model 26M only)


MS4C0 Contoured Weld Fitting and Plug, 1—11.5 NPT, CS
MS4CW Contoured Weld Fitting and Plug, 1 in. Socket Weld Ports, CS
MS4S0 Contoured Weld Fitting and Plug, 1—11.5 NPT, SST
MS4SW Contoured Weld Fitting and Plug, 1 in. Socket Weld Ports, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)

TRA Integral RTD, Axial Head


TRP Integral RTD, Parallel Head
TXA Integral RTD, Explosion, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly


S4 Factory Assembly of Rosemount DP Transmitter to DP Primary Element

Code Optional Calibration

M Lab Flow Calibration (Average K) (<10 in.)


Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Flow-418
Rosemount Inc.

MODEL DFF+25M/26M
Code Optional Quality Assurance
QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DFF+25M 040 HAMM0 C0000 FA6M0 FA6C

Diamond II+ Annubar®

Flow-419
Diamond II+ Annubar®

MODEL DFF+35S/36S
Model Product Description
DFF+35S Diamond II + Annubar® Primary Flow Element - Flanged, SST
DFF+36S Diamond II + Annubar® Primary Flow Element - Flanged with Opposite Side Support, SST

Code Line Size

080 8 in. (200 mm)


100 10 in. (250 mm)
120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)
480 48 in. (1210 mm)
600 60 in. 1520 mm)
720 72 in. (1820 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HAMS0 Integral, 3-Valve Manifold, Horizontal Line, SST
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
Diamond II+ Annubar®

HAXS0 Direct Mount, Quantity Two, 3-Valve Manifold, Horizontal Line, SST
Direct and Integral Mount Heads - Horizontal Line with RTD
HATSN Direct Mount, 5-Valve Manifold, RTD, NACE, Horizontal Line, SST
HATS0 Integral, 3-Valve Manifold, RTD, Horizontal Line, SST
HATSB Direct Mount, 5-Valve Manifold, RTD, B31.1, Horizontal Line, SST
HATSD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, 3-Valve Manifold, Vertical Line, SST
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, SST
Direct and Integral Mount Heads - Vertical Line with RTD
HVTS0 Integral, 3-Valve Manifold, RTD, Vertical Line, SST
HVTSB Direct Mount, 5-Valve Manifold, RTD, B31.1, Vertical Line, SST
HVTSD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, SST
HVTSN Direct Mount, 5-Valve Manifold, RTD, NACE, Vertical Line, SST
Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, ½—14 NPT, SST
HA2SS Axial, Horizontal Line, ½ in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, ½—14 NPT, SST
HP2SS Parallel, Horizontal Line, ½ in. Socket Weld Ports, SST
HAHS0 Axial, HP, Horizontal Line, ½—14 NPT, SST
HAHSS Axial, HP, Horizontal Line, ½ in. Socket Weld Ports, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, ½ in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, ½—14 NPT, SST
HV2S0 Axial, Vertical Line, ½—14 NPT, SST
HV2SS Axial, Vertical Line, ½ in. Socket Weld Ports, SST
HVHS0 Axial, HP, Vertical Line, ½—14 NPT, SST
HVHSS Axial, HP, Vertical Line, ½ in. Socket Weld Ports, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CA2C0 Needle Valve, Elbow, ½—14 NPT, CS
CP2C0 Needle Valve, Nipple, ½—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, ½—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, ½—14 NPT, CS

Flow-420
Rosemount Inc.

MODEL DFF+35S/36S
Code Instrument Connections (Continued)
Needle Valves - SST
CA2S0 Needle Valve, Elbow, ½—14 NPT, SST
CA2SS Needle Valve, Elbow, ½ in. Socket Weld Ports, SST
CP2S0 Needle Valve, Nipple, ½—14 NPT, SST
CP2SS Needle Valve, Nipple, ½ in. Socket Weld Ports, SST
SA2S0 Needle Valve, Elbow and Tee, ½—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, ½—14 NPT, SST
SP2SS Needle Valve, Nipple and Tee, ½ in. Socket Weld Ports, SST
Gate Valves - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, ½—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, ½—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, ½—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, ½—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½—14 NPT, CS
Gate Valves - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, ½—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, ½ in. Socket Weld Ports, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, ½—14 NPT, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, ½ in. Socket Weld Ports, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, ½—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, ½—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½—14 NPT, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½ in. Socket Weld Ports, SST

Code Sensor Flange

Diamond II+ Annubar®


FNRS0 DIN 50 PN 100, 316 SST
FLRS0 DIN 50 PN 40, 316 SST
FJRS0 DIN 50 PN 16, 316 SST
FFDS0 3 in. ANSI Class 2500, RF, SST
FEDS0 3 in. ANSI Class 1500, RF, SST
FDDS0 3 in. ANSI 900, RF, SST
FC8S0 2 in. ANSI Class 600, RF, SST
FBDS0 3 in. ANSI Class 300, RF, SST
FA8S0 2 in. ANSI Class 150, RF, SST

Code Flanged Mount


FA8C 2 in. ANSI Class 150, Weld-Neck RF,CS
FA8S 2 in. ANSI Class 150, Weld-Neck RF, SST
FB8C 2 in. ANSI Class 300, Weld-Neck RF, CS
FB8S 2 in. ANSI Class 300, Weld-Neck RF, SST
FC8C 2 in. ANSI Class 600, Weld-Neck RF, CS
FC8S 2 in. ANSI Class 600, Weld-Neck RF, SST
FDDC 3 in. ANSI Class 900, Weld-Neck RF, CS
FDDS 3 in. ANSI Class 900, Weld-Neck RF, SST
FEDC 3 in. ANSI Class 1500, Weld-Neck RF, CS
FEDS 3 in. ANSI Class 1500, Weld-Neck RF, SST
FFDC 3 in. ANSI Class 2500, Weld-Neck RF, CS
FFDS 3 in. ANSI Class 2500, Weld-Neck RF, SST
FJRC DIN 50 PN 16, CS
FJRS DIN 50 PN 16, 316 SST
FLRC DIN 50 PN 40, CS
FLRS DIN 50 PN 40, 316 SST
FNRC DIN 50 PN 100, CS
FNRS DIN 50 PN 100, 316 SST

Code Opposite Side Support (Required for Model 36S only)

MS6C0 Contoured Weld Fitting and Plug, 1½—11.5 NPT, CS


MS6CW Contoured Weld Fitting and Plug, 1½ in. Socket Weld Ports, CS
MS6S0 Contoured Weld Fitting and Plug, 1½—11.5 NPT, SST
MS6SW Contoured Weld Fitting and Plug, 1½ in. Socket Weld Ports, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, Explosion, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Flow-421
Diamond II+ Annubar®

MODEL DFF+35S/36S
Code Optional Special Assembly
S4 Factory Assembly of Rosemount DP Transmitter to DP Primary Element

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Code Optional Quality Assurance


QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DFF+35S 080 HAMS0 C0000 FA8S0 FA8C


Diamond II+ Annubar®

Flow-422
Rosemount Inc.

MODEL DFF+45S/46S
Model Product Description
DFF+45S Diamond II + Annubar® Primary Flow Element - Flanged, SST
DFF+46S Diamond II + Annubar® Primary Flow Element - Flanged with Opposite Side Support, SST

Code Line Size

100 10 in. (250 mm)


120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)
480 48 in. (1210 mm)
600 60 in. 1520 mm)
720 72 in. (1820 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HAMS0 Integral, 3-Valve Manifold, Horizontal Line, SST
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
HAXS0 Direct Mount, Quantity Two, 3-Valve Manifold, Horizontal Line, SST

Diamond II+ Annubar®


Direct and Integral Mount Heads - Horizontal Line with RTD
HATSN Direct Mount, 5-Valve Manifold, RTD, NACE, Horizontal Line, SST
HATS0 Integral, 3-Valve Manifold, RTD, Horizontal Line, SST
HATSB Direct Mount, 5-Valve Manifold, RTD, B31.1, Horizontal Line, SST
HATSD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, 3-Valve Manifold, Vertical Line, SST
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, SST
Direct and Integral Mount Heads - Vertical Line with RTD
HVTS0 Integral, 3-Valve Manifold, RTD, Vertical Line, SST
HVTSB Direct Mount, 5-Valve Manifold, RTD, B31.1, Vertical Line, SST
HVTSD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, SST
HVTSN Direct Mount, 5-Valve Manifold, RTD, NACE, Vertical Line, SST
Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, ½—14 NPT, SST
HA2SS Axial, Horizontal Line, ½ in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, ½—14 NPT, SST
HP2SS Parallel, Horizontal Line, ½ in. Socket Weld Ports, SST
HAHS0 Axial, HP, Horizontal Line, ½—14 NPT, SST
HAHSS Axial, HP, Horizontal Line, ½ in. Socket Weld Ports, SST
HSHS0 Stack Head with Purge, Horizontal Line, ½—14 NPT, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, ½ in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, ½—14 NPT, SST
HV2S0 Axial, Vertical Line, ½—14 NPT, SST
HV2SS Axial, Vertical Line, ½ in. Socket Weld Ports, SST
HVHS0 Axial, HP, Vertical Line, ½—14 NPT, SST
HVHSS Axial, HP, Vertical Line, ½ in. Socket Weld Ports, SST
HSVS0 Stack Head with Purge, Vertical Line, ½—14 NPT, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CP2C0 Needle Valve, Nipple, ½—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, ½—14 NPT, CS

Flow-423
Diamond II+ Annubar®

MODEL DFF+45S/46S
Code Instrument Connections (Continued)
CP2S0 Needle Valves - SST
SP2S0 Needle Valve, Nipple, ½—14 NPT, SST
CP2SS Needle Valve, Nipple and Tee, ½—14 NPT, SST
SP2SS Needle Valve, Nipple, ½ in. Socket Weld Ports, SST
Needle Valve, Nipple and Tee, ½ in. Socket Weld Ports, SST
Gate Valves - SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, ½—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, ½—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, ½ in. Socket Weld Ports, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, ½ in. Socket Weld Ports, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½ in. Socket Weld Ports, SST

Code Sensor Flange


FNTS0 DIN 80 PN 100, 316 SST
FLTS0 DIN 80 PN 40, 316 SST
FJTS0 DIN 80 PN 16, 316 SST
FFDS0 3 in. ANSI Class 2500, RF, SST
FEDS0 3 in. ANSI Class 1500, RF, SST
FDDS0 3 in. ANSI Class 900, RF, SST
FCDS0 3 in. ANSI Class 600, RF, SST
FBDS0 3 in. ANSI Class 300, RF, SST
FADS0 3 in. ANSI Class 150, RF, SST

Code Flanged Mount


Diamond II+ Annubar®

FDDC 3 in. ANSI Class 900, Weld-Neck RF, CS


FDDS 3 in. ANSI Class 900, Weld-Neck RF, SST
FFDC 3 in. ANSI Class 2500, Weld-Neck RF, CS
FFDS 3 in. ANSI Class 2500, Weld-Neck RF, SST
FADC 3 in. ANSI Class 150, Weld-Neck RF, CS
FADS 3 in. ANSI Class 150, Weld-Neck RF, SST
FBDC 3 in. ANSI Class 300, Weld-Neck RF, CS
FBDS 3 in. ANSI Class 300, Weld-Neck RF, SST
FCDC 3 in. ANSI Class 600, Weld-Neck RF, CS
FCDS 3 in. ANSI Class 600, Weld-Neck RF, SST
FJTC DIN 80 PN 16, CS
FJTS DIN 80 PN 16, 316 SST
FLTC DIN 80 PN 40, CS
FLTS DIN 80 PN 40, 316 SST
FNTC DIN 80 PN 100, CS
FNTS DIN 80 PN 100, 316 SST

Code Opposite Side Support (Required for Model 46S only)


MSDCW Contoured Weld Fitting and Cap, 3 in., BW, CS
MSDSW Contoured Weld Fitting and Cap, 3 in., BW, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, Explosion, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly


S4 Factory Assembly of Rosemount DP Transmitter to DP Primary Element

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Flow-424
Rosemount Inc.

MODEL DFF+45S/46S
Code Optional Quality Assurance
QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DFF+45S 240 HAMS0 C0000 FADS0 FADC

Diamond II+ Annubar®

Flow-425
Diamond II+ Annubar®

MODEL DFF+45H/46H
Model Product Description
DFF+45H Diamond II + Annubar® Primary Flow Element - Flanged, Hastelloy-C
DFF+46H Diamond II + Annubar® Primary Flow Element - Flanged with Opposite Side Support, Hastelloy-C

Code Line Size

100 10 in. (250 mm)


120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)
480 48 in. (1210 mm)
600 60 in. 1520 mm)
720 72 in. (1820 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HADH0 Direct Mount, with 5-Valve Manifold, Horizontal Line, Hastelloy-C
HADHB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, Hastelloy-C
HADHN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, Hastelloy-C
HAMH0 Integral, 3-Valve Manifold, Horizontal Line, Hastelloy-C
HAPH0 Direct Mount, No Manifold, Horizontal Line, Hastelloy-C
Diamond II+ Annubar®

Direct and Integral Mount Heads - Horizontal Line with RTD


HATH0 Integral, 3-Valve Manifold, RTD, Horizontal Line, Hastelloy-C
HATHD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, Hastelloy-C
HATHN Direct Mount, 5-Valve Manifold, RTD, NACE, Horizontal Line, Hastelloy-C
HATHB Direct Mount, 5-Valve Manifold, RTD, B31.1, Horizontal Line, Hastelloy-C
Direct and Integral Mount Heads - Vertical Line
HVMH0 Integral, 3-Valve Manifold, Vertical Line, Hastelloy-C
HVDH0 Direct Mount, with 5-Valve Manifold, Vertical Line, Hastelloy-C
HVDHB Direct Mount, 5-Valve Manifold, B31.1, Vertical Line, Hastelloy-C
HVDHN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, Hastelloy-C
HVPH0 Direct Mount, No Manifold, Vertical Line, Hastelloy-C
Direct and Integral Mount Heads - Vertical Line with RTD
HVTH0 Integral, 3-Valve Manifold, RTD, Vertical Line, Hastelloy-C
HVTHB Direct Mount, 5-Valve Manifold, RTD, B31.1, Vertical Line, Hastelloy-C
HVTHD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, Hastelloy-C
HVTHN Direct Mount, 5-Valve Manifold, RTD, NACE, Vertical Line, Hastelloy-C
Remote Mount - Horizontal Line
HA2H0 Axial, Horizontal Line, ½—14 NPT, Hastelloy-C
HA2HS Axial, Horizontal Line, ½ in. Socket Weld Ports, Hastelloy-C
HP2H0 Parallel, Horizontal Line, ½—14 NPT, Hastelloy-C
HAHH0 Axial, HP, Horizontal Line, ½—14 NPT, Hastelloy-C
HAHHS Axial, HP, Horizontal Line, ½ in. Socket Weld Ports, Hastelloy-C
Remote Mount - Vertical Line
HPVH0 Parallel, Vertical Line, ½—14 NPT, Hastelloy-C
HV2H0 Axial, Vertical Line, ½—14 NPT, Hastelloy-C
HVHH0 Axial, HP, Vertical Line, ½—14 NPT, Hastelloy-C
HVHHS Axial, HP, Vertical Line, ½ in. Socket Weld Ports, Hastelloy-C
HSVH0 Stack Head with Purge, Vertical Line, ½—14 NPT, Hastelloy-C

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CP2C0 Needle Valve, Nipple, ½—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, ½—14 NPT, CS
Needle Valves - SST
CP2S0 Needle Valve, Nipple, ½—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, ½—14 NPT, SST
Needle Valves - Hastelloy-C
CP2H0 Needle Valve, Nipple, ½—14 NPT, Hastelloy-C

Flow-426
Rosemount Inc.

MODEL DFF+45H/46H
Code Instrument Connections (Continued)
Gate Valves - CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, ½—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, ½—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½—14 NPT, CS
Gate Valves - SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, ½—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, ½—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½—14 NPT, SST

Code Sensor Flange


FDDH0 3 in. ANSI Class 900, RF, Hastelloy-C
FFDH0 3 in. ANSI Class 2500, RF, Hastelloy-C
FEDH0 3 in. ANSI Class 1500, RF, Hastelloy-C
FCDH0 3 in. ANSI Class 600, RF, Hastelloy-C
FBDH0 3 in. ANSI Class 300, RF, Hastelloy-C
FADH0 3 in. ANSI Class 150, RF, Hastelloy-C

Code Flanged Mount


FDDC 3 in. ANSI Class 900, Weld-Neck RF, CS
FDDS 3 in. ANSI Class 900, Weld-Neck RF, SST
FFDC 3 in. ANSI Class 2500, Weld-Neck RF, CS
FFDS 3 in. ANSI Class 2500, Weld-Neck RF, SST
FADC 3 in. ANSI Class 150, Weld-Neck RF, CS
FADS 3 in. ANSI Class 150, Weld-Neck RF, SST
FBDC 3 in. ANSI Class 300, Weld-Neck RF, CS

Diamond II+ Annubar®


FBDS 3 in. ANSI Class 300, Weld-Neck RF, SST
FCDC 3 in. ANSI Class 600,Weld-Neck RF, CS
FCDS 3 in. ANSI Class 600,Weld-Neck RF, SST

Code Opposite Side Support (Required for Model 46H only)


MSDCW Contoured Weld Fitting and Cap, 3 in., BW, CS
MSDSW Contoured Weld Fitting and Cap, 3 in., BW, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)

TRA Integral RTD, Axial Head


TRP Integral RTD, Parallel Head
TXA Integral RTD, Explosion, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly


S4 Factory Assembly of Rosemount DP Transmitter to DP Primary Element

Code Optional Calibration

M Lab Flow Calibration (Average K) (<10 in.)


Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Code Optional Quality Assurance


QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DFF+45H 240 HAMH0 C0000 FADH0 FADC

Flow-427
Diamond II+ Annubar®

MODEL DFF+45M/46M
Model Product Description
DFF+45M Diamond II + Annubar® Primary Flow Element - Flanged, Monel
DFF+46M Diamond II + Annubar® Primary Flow Element - Flanged with Opposite Side Support, Monel

Code Line Size

100 10 in. (250 mm)


120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)
480 48 in. (1210 mm)
600 60 in. 1520 mm)
720 72 in. (1820 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HADM0 Direct Mount, with 5-Valve Manifold, Horizontal Line, Monel
HADMB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, Monel
HADMN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, Monel
HAMM0 Integral, 3-Valve Manifold, Horizontal Line, Monel
HAPM0 Direct Mount, No Manifold, Horizontal Line, Monel
Diamond II+ Annubar®

Direct and Integral Mount Heads - Horizontal Line with RTD


HATM0 Integral, 3-Valve Manifold, RTD, Horizontal Line, Monel
HATMD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, Monel
HATMN Direct Mount, 5-Valve Manifold, RTD, NACE, Horizontal Line, Monel
HATMB Direct Mount, 5-Valve Manifold, RTD, B31.1, Horizontal Line, Monel
Direct and Integral Mount Heads - Vertical Line
HVMM0 Integral, 3-Valve Manifold, Vertical Line, Monel
HVDM0 Direct Mount, with 5-Valve Manifold, Vertical Line, Monel
HVDMB Direct Mount, 5-Valve Manifold, B31.1, Vertical Line, Monel
HVDMN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, Monel
HVPM0 Direct Mount, No Manifold, Vertical Line, Monel
Direct and Integral Mount Heads - Vertical Line with RTD
HVTM0 Integral, 3-Valve Manifold, RTD, Vertical Line, Monel
HVTMB Direct Mount, 5-Valve Manifold, RTD, B31.1, Vertical Line, Monel
HVTMD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, Monel
HVTMN Direct Mount, 5-Valve Manifold, RTD, NACE, Vertical Line, Monel
Remote Mount - Horizontal Line
HA2M0 Axial, Horizontal Line, ½—14 NPT, Monel
HA2MS Axial, Horizontal Line, ½ in. Socket Weld Ports, Monel
HP2M0 Parallel, Horizontal Line, ½—14 NPT, Monel
HAHM0 Axial, HP, Horizontal Line, ½—14 NPT, Monel
HAHMS Axial, HP, Horizontal Line, ½ in. Socket Weld Ports, Monel
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, ½ in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, ½—14 NPT, SST
HV2S0 Axial, Vertical Line, ½—14 NPT, SST
HV2SS Axial, Vertical Line, ½ in. Socket Weld Ports, SST
HVHS0 Axial, HP, Vertical Line, ½—14 NPT, SST
HVHSS Axial, HP, Vertical Line, ½ in. Socket Weld Ports, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CP2C0 Needle Valve, Nipple, ½—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, ½—14 NPT, CS
Needle Valves - SST
CP2S0 Needle Valve, Nipple, ½—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, ½—14 NPT, SST

Flow-428
Rosemount Inc.

MODEL DFF+45M/46M
Code Instrument Connections (Continued)
Needle Valves - Monel
CP2M0 Needle Valve, Nipple, ½—14 NPT, Monel
Gate Valves - CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, ½—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, ½—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½—14 NPT, CS
Gate Valves - SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, ½—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, ½—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½—14 NPT, SST

Code Sensor Flange


FFDM0 3 in. ANSI Class 2500, RF, Monel
FEDM0 3 in. ANSI Class 1500, RF, Monel
FCDM0 3 in. ANSI Class 600, RF, Monel
FBDM0 3 in. ANSI Class 300, RF, Monel
FADM0 3 in. ANSI Class 150, RF, Monel

Code Flanged Mount


FDDC 3 in. ANSI Class 900, Weld-Neck RF, CS
FDDS 3 in. ANSI Class 900, Weld-Neck RF, SST
FFDC 3 in. ANSI Class 2500, Weld-Neck RF, CS
FFDS 3 in. ANSI Class 2500, Weld-Neck RF, SST
FADC 3 in. ANSI Class 150, Weld-Neck RF, CS
FADS 3 in. ANSI Class 150, Weld-Neck RF, SST

Diamond II+ Annubar®


FBDC 3 in. ANSI Class 300, Weld-Neck RF, CS
FBDS 3 in. ANSI Class 300, Weld-Neck RF, SST
FCDC 3 in. ANSI Class 600, Weld-Neck RF, CS
FCDS 3 in. ANSI Class 600, Weld-Neck RF, SST

Code Opposite Side Support (Required for Model 46M only)


MSDCW Contoured Weld Fitting and Cap, 3 in., BW, CS
MSDSW Contoured Weld Fitting and Cap, 3 in., BW, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, Explosion, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly

S4 Factory Assembly of Rosemount DP Transmitter to DP Primary Element

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Code Optional Quality Assurance

QA1 Dieterich Program


Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DFF+45M 240 HAMM0 C0000 FADM0 FADC

Flow-429
Diamond II+ Annubar®
Diamond II+ Annubar®

Flow-430
Rosemount Inc.

Diamond II+ Annubar®

Flow-431
Diamond II+ Annubar®
Diamond II+ Annubar®

Flow-432
Rosemount Inc.

Diamond II+ Annubar®

Flow-433
Diamond II+ Annubar®

Ordering Information—Model DPF


MODELS DPF+15S/16S
Model Product Description
DPF+15S Diamond II + Annubar® Primary Flow Element - Pak-Lok Flanged
DPF+16S Diamond II + Annubar® Primary Flow Element - Pak-Lok Flanged with Opposite Side Support

Code Line Size


020 2 in. (50 mm)
025 21/2 in. (63.5 mm)
030 3 in. (80 mm)
035 31/2 in. (89 mm)
040 4 in. (100 mm)
050 5 in. (125 mm)

Code Head Style


Direct and Integral Mount Head - Vertical Line
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Ports, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
Axial, Vertical Line, 1/2—14 NPT, SST
Diamond II+ Annubar®

HV2S0
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Ports, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valve - CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
Needle Valve - SST
CA2SS Needle Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CP2S0 Needle Valve, Nipple,1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
CP2SS Needle valve, Nipple, 1/2 in. Socket Weld Ports, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
Gate Valve - CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT,CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
Gate Valve - SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Ports, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT,SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST

Flow-434
Rosemount Inc.

MODELS DPF+15S/16S
Code Pak-Lok Sensor Flange
PA4C2 Pak-Lok Flange, 1 in. ANSI Class 150, RF, CS
PA4S2 Pak-Lok Flange, 1 in. ANSI Class 150, RF, SST
PB4C2 Pak-Lok Flange, 1 in. ANSI Class 300, RF, CS
PB4S2 Pak-Lok Flange, 1 in. ANSI Class 300, RF, SST
PC4C2 Pak-Lok Flange, 1 in. ANSI Class 600, RF, CS
PC4S2 Pak-Lok Flange, 1 in. ANSI Class 600, RF, SST

Code Flanged Mounting

FA4C 1 in. ANSI Class 150, Weld-Neck RF, CS


FA4S 1 in. ANSI Class 150, Weld-Neck RF, SST
FB4C 1 in. ANSI Class 300, Weld-Neck RF, CS
FB4S 1 in. ANSI Class 300, Weld-Neck RF, SST
FC4C 1 in. ANSI Class 600, Weld-Neck RF, CS
FC4S 1 in. ANSI Class 600, Weld-Neck RF, SST

Code Opposite Side Support (Required for Model 16S only)


MS2C0 Contoured Weld Fitting and Plug, 1/2—14 NPT, CS
MS2CW Contoured Weld Fitting and Plug, 1/2 in. Socket Weld Ports, CS
MS2S0 Contoured Weld Fitting and Plug, 1/2—14 NPT, SST
MS2SW Contoured Weld Fitting and Plug, 1/2 in. Socket Weld Ports, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly

Diamond II+ Annubar®


S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration

Code Optional Quality Assurance


QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number: DPF+15S 020 HA2S0 CP2C0 PA4C2 FA4C

Flow-435
Diamond II+ Annubar®

MODELS DPF+25S/26S
Model Product Description
DPF+25S Diamond II + Annubar® Primary Flow Element - Pak-Lok Flanged
DPF+26S Diamond II + Annubar®Primary Flow Element - Pak-Lok Flanged with Opposite Side Support

Code Line Size

040 4 in. (100 mm)


050 5 in. (125 mm)
060 6 in. (150 mm)
080 8 in. (200 mm)
100 10 in. (250 mm)
120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)

Code Head Style


Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Ports, SST
Diamond II+ Annubar®

Remote Mount - Vertical Line


HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Ports, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valve - CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
Needle Valve - SST
CA2SS Needle Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CP2S0 Needle Valve, Nipple,1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
CP2SS Needle valve, Nipple, 1/2 in. Socket Weld Ports, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
Gate Valve - CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT,CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
Gate Valve - SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Ports, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT,SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST

Flow-436
Rosemount Inc.

MODELS DPF+25S/26S
Code Pak-lok Sensor Flange
PA6C4 Pak-Lok Flange, 11/2 in. ANSI Class 150, RF, CS
PA6S4 Pak-Lok Flange, 11/2 in. ANSI Class 150, RF, SST
PB6C4 Pak-Lok Flange, 11/2 in. ANSI Class 300, RF, CS
PB6S4 Pak-Lok Flange, 11/2 in. ANSI Class 300, RF, SST
PC6C4 Pak-Lok Flange, 11/2 in. ANSI Class 600, RF, CS
PC6S4 Pak-Lok Flange, 11/2 in. ANSI Class 600, RF, SST

Code Flanged Mounting

FA6C 11/2 in. ANSI Class 150, Weld-Neck RF, CS


FA6S 11/2 in. ANSI Class 150, Weld-Neck RF, SST
FB6C 11/2 in. ANSI Class 300, Weld-Neck RF, CS
FB6S 11/2 in. ANSI Class 300, Weld-Neck RF, SST
FC6C 11/2 in. ANSI Class 600, Weld-Neck RF, CS
FC6S 11/2 in. ANSI Class 600, Weld-Neck RF, SST

Code Opposite Side Support (Required for Model 26S only)


MS4C0 Contoured Weld Fitting and Plug, 1—11.5 NPT, CS
MS4CW Contoured Weld Fitting and Plug, 1 in. Socket Weld Ports, CS
MS4S0 Contoured Weld Fitting and Plug, 1—11.5 NPT, SST
MS4SW Contoured Weld Fitting and Plug, 1 in. Socket Weld Ports, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof
TRA Integral RTD, Axial Head

Diamond II+ Annubar®


TRP Integral RTD, Parallel Head
TXA Integral RTD, FM Explosion-Proof, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel

Code Optional Special Assembly


S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Code Optional Quality Assurance


QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number: DPF+25S 040 HA2S0 CP2C0 PA6C4 FA6C

Flow-437
Diamond II+ Annubar®

MODELS DPF+35S/36S
Model Product Description
DPF+35S Diamond II + Annubar® Primary Flow Element - Pak-Lok Flanged
DPF+36S Diamond II + Annubar® Primary Flow Element - Pak-Lok Flanged with Opposite Side Support

Code Line Size

080 8 in. (200 mm)


100 10 in. (250 mm)
120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)
480 48 in. (1210 mm)
600 60 in. 1520 mm)
720 72 in. (1820 mm)

Code Head Style


Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Ports, SST
Diamond II+ Annubar®

Remote Mount - Vertical Line


HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Ports, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valve - CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
Needle Valve - SST
CA2SS Needle Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CP2S0 Needle Valve, Nipple,1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
CP2SS Needle valve, Nipple, 1/2 in. Socket Weld Ports, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
Gate Valve - CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT,CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
Gate Valve - SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Ports, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT,SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST

Flow-438
Rosemount Inc.

MODELS DPF+35S/36S
Code Pak-Lok Sensor Flange
PA8C6 Pak-Lok Flange, 2 in. ANSI Class 150, RF, CS
PA8S6 Pak-Lok Flange, 2 in. ANSI Class 150, RF, SST
PB8C6 Pak-Lok Flange, 2 in. ANSI Class 300, RF, CS
PB8S6 Pak-Lok Flange, 2 in. ANSI Class 300, RF, SST
PC8C6 Pak-Lok Flange, 2 in. ANSI Class 600, RF, CS
PC8S6 Pak-Lok Flange, 2 in. ANSI Class 600, RF, SST

Code Flanged Mount

FA8C 2 in. ANSI Class 150, Weld-Neck RF, CS


FA8S 2 in. ANSI Class 150, Weld-Neck RF, SST
FB8C 2 in. ANSI Class 300, Weld-Neck RF, CS
FB8S 2 in. ANSI Class 300, Weld-Neck RF, SST
FC8C 2 in. ANSI Class 600, Weld-Neck RF, CS
FC8S 2 in. ANSI Class 600, Weld-Neck RF, SST

Code Opposite Side Support (Required for Model 36S only)


MS6C0 Contoured Weld Fitting and Plug, 1 1/2—11.5 NPT, CS
MS6CW Contoured Weld Fitting and Plug, 1 1/2 in. Socket Weld Ports, CS
MS6S0 Contoured Weld Fitting and Plug, 1 1/2—11.5 NPT, SST
MS6SW Contoured Weld Fitting and Plug, 1 1/2 in. Socket Weld Ports, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof
TRA Integral RTD, Axial Head

Diamond II+ Annubar®


TRP Integral RTD, Parallel Head
TXA Integral RTD, FM Explosion-Proof, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel

Code Optional Special Assembly


S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Code Optional Quality Assurance


QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number: DPF+35S 120 HA2S0 CP2C0 PA8C6 FA8C

Flow-439
Diamond II+ Annubar®

MODELS DPF+45S/46S
Model Product Description
DPF+45S Diamond II + Annubar® Primary Flow Element - Pak-Lok Flanged
DPF+46S Diamond II + Annubar® Primary Flow Element - Pak-Lok Flanged with Opposite Side Support

Code Line Size

100 10 in. (250 mm)


120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)
480 48 in. (1210 mm)
600 60 in. (1520 mm)
720 72 in. (1820 mm)

Code Head Style


Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Ports, SST
Remote Mount - Vertical Line
Parallel, Vertical Line, 1/2 in. Socket Weld Ports, SST
Diamond II+ Annubar®

HPVS0
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Ports, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valve - CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
Needle Valve - SST
CA2SS Needle Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CP2S0 Needle Valve, Nipple,1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
CP2SS Needle valve, Nipple, 1/2 in. Socket Weld Ports, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
Gate Valve - CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT,CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
Gate Valve - SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Ports, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT,SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST

Flow-440
Rosemount Inc.

MODELS DPF+45S/46S
Code Pak-Lok Sensor Flange
PADCD Pak-Lok Flange, 3 in. ANSI Class 150, RF, CS
PADSD Pak-Lok Flange, 3 in. ANSI Class 150, RF, SST
PBDCD Pak-Lok Flange, 3 in. ANSI Class 300, RF, CS
PBDSD Pak-Lok Flange, 3 in. ANSI Class 300, RF, SST
PCDCD Pak-Lok Flange, 3 in. ANSI Class 600, RF, CS
PCDSD Pak-Lok Flange, 3 in. ANSI Class 600, RF, SST

Code Flanged Mount

FADC 3 in. ANSI Class 150, Weld-Neck RF, CS


FADS 3 in. ANSI Class 150, Weld-Neck RF, SST
FBDC 3 in. ANSI Class 300, Weld-Neck RF, CS
FBDS 3 in. ANSI Class 300, Weld-Neck RF, SST
FCDC 3 in. ANSI Class 600, Weld-Neck RF, CS
FCDS 3 in. ANSI Class 600, Weld-Neck RF, SST

Code Opposite Side Support (Required for Model 46S only)


MSDCW Contoured Weld Fitting and Cap, 3 in., BW, CS
MSDSW Contoured Weld Fitting and Cap, 3 in., BW, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, FM Explosion-Proof, Axial

Diamond II+ Annubar®


TXP Integral RTD, FM Explosion-Proof, Parallel

Code Optional Special Assembly


S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Code Optional Quality Assurance


QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number: DPF+45S 240 HA2S0 CP2C0 PADCD FADC

Flow-441
Diamond II+ Annubar®
Diamond II+ Annubar®

Flow-442
Rosemount Inc.

Diamond II+ Annubar®

Flow-443
Diamond II+ Annubar®
Diamond II+ Annubar®

Flow-444
Rosemount Inc.

Diamond II+ Annubar®

Flow-445
Diamond II+ Annubar®

Ordering Information—Model DNT


MODEL DNT+10S
Model Product Description
DNT+10S Diamond II + Annubar® Primary Flow Element - In-line Threaded

Code Line Size


1
005 /2 in. (12.5 mm)
3
007 /4 in. (19 mm)
010 1 in. (25 mm)
012 11/4 in. (31 mm)
015 11/2 in. (37.5 mm)
020 2 in. (50 mm)

Code Fittings
Direct and Integral Mount Heads - Horizontal Line
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
HAMS0 Integral, with 3-Valve Manifold, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, with 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, with 3-Valve Manifold, Vertical Line, SST
Diamond II+ Annubar®

Remote Mount
HF1SS Fittings, 1/4 in. Socket Weld Ports, SST
HM1S0 Fittings, 1/4 in., MNPT, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
CP1C0 Needle Valve, Nipple, 1/4—18 NPT, CS
CP1S0 Needle Valve, Nipple, 1/4—18 NPT, SST
SB1C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/4—18 NPT, CS
SB1S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/4—18 NPT, SST
SP1C0 Needle Valve, Nipple and Tee, 1/4—18 NPT, CS
SP1S0 Needle Valve, Nipple and Tee, 1/4—18 NPT, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly


S4 Factory Assembly of DP Transmitter to DP Primary

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration

Code Optional Quality Assurance


QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number: DNT+10S 010 HAMS0 HF1SS C0000

Flow-446
Rosemount Inc.

Ordering Information—Model DNF


MODEL DNF+10S
Model Product Description
DNF+10S Diamond II + Annubar® Primary Flow Element - In-line Flanged

Code Line Size


1
005 /2 in. (12.5 mm)
3
007 /4 in. (19 mm)
010 1 in. (25 mm)
012 11/4 in. (31 mm)
015 11/2 in. (37.5 mm)
020 2 in. (50 mm)

Code Fittings
Direct and Integral Mount Heads - Horizontal Line
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
HAMS0 Integral, with 3-Valve Manifold, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, with 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, with 3-Valve Manifold, Vertical Line, SST

Diamond II+ Annubar®


Remote Mount
HF1SS Fittings, 1/4 in. Socket Weld Ports, SST
HM1S0 Fittings, 1/4 in. MNPT, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
CP1C0 Needle Valve, Nipple, 1/4—18 NPT, CS
CP1S0 Needle Valve, Nipple, 1/4—18 NPT, SST
SB1C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/4—18 NPT, CS
SB1S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/4—18 NPT, SST
SP1C0 Needle Valve, Nipple and Tee, 1/4—18 NPT, CS
SP1S0 Needle Valve, Nipple and Tee, 1/4—18 NPT, SST

Code Flanged Mount


FAS ANSI Class 150, Weld-Neck RF, SST
FBS ANSI Class 300, Weld-Neck RF, SST
FCS ANSI Class 600, Weld-Neck RF, SST
FJS DIN PN 16, SST
FLS DIN PN 40, SST
FNS DIN PN 100, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly

S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration


B Lab Flow Calibration (Average K) (<10 in.)
S Special Calibration

Flow-447
Diamond II+ Annubar®

MODEL DNF+10S
Code Optional Quality Assurance
QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number: DNF+10S 010 HAMS0 HF1SS C0000 FAS


Diamond II+ Annubar®

Flow-448
Rosemount Inc.

MODEL DNF+10H
Model Product Description
DNF+10H Diamond II + Annubar® Primary Flow Element - In-line Flanged

Code Line Size


1
005 /2 in. (12.5 mm)
3
007 /4 in. (19 mm)
010 1 in. (25 mm)
012 11/4 in. (31 mm)
015 11/2 in. (37.5 mm
020 2 in. (50 mm)

Code Fittings
Direct and Integral Mount Heads - Horizontal Line
HADH0 Direct Mount, with 5-Valve Manifold, Horizontal Line, Hastelloy-C
HADHB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, Hastelloy-C
HADHN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, Hastelloy-C
HAPH0 Direct Mount, No Manifold, Horizontal Line, Hastelloy-C
HAMH0 Integral, 3-Valve Manifold, Horizontal Line, Hastelloy-C
Direct and Integral Mount Heads - Vertical Line
HVDH0 Direct Mount, with 5-Valve Manifold, Vertical Line, Hastelloy-C
HVDHB Direct Mount, 5-Valve Manifold, B31.1, Vertical Line, Hastelloy-C
HVDHN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, Hastelloy-C
HVPH0 Direct Mount, No Manifold, Vertical Line, Hastelloy-C
HVMH0 Integral, 3-Valve Manifold, Vertical Line, Hastelloy-C
Remote Mount
HM1H0 Fittings, 1/4 in., MNPT, Hastelloy-C

Diamond II+ Annubar®


Code Instrument Connections
Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
CP1C0 Needle Valve, Nipple, 1/4—18 NPT, CS
CP1S0 Needle Valve, Nipple, 1/4—18 NPT, SST
SB1C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/4—18 NPT, CS
SB1S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/4—18 NPT, SST
SP1C0 Needle Valve, Nipple and Tee, 1/4—18 NPT, CS
SP1S0 Needle Valve, Nipple and Tee, 1/4—18 NPT, SST

Code Flanged Mount


FAH ANSI Class 150, Weld-Neck RF, Hastelloy-C
FBH ANSI Class 300, Weld-Neck RF, Hastelloy-C
FCH ANSI Class 600, Weld-Neck RF, Hastelloy-C

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly


S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration

Code Optional Quality Assurance


QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number: DNF+10H 010 HAMH0 C0000 FAH

Flow-449
Diamond II+ Annubar®

MODEL DNF+10M
Model Product Description
DNF+10M Diamond II + Annubar® Primary Flow Element - In-line Flanged

Code Line Size


1
005 /2 in. (12.5 mm)
3
007 /4 in. (19 mm)
010 1 in. (25 mm)
012 11/4 in. (31 mm)
015 11/2 in. (37.5 mm)
020 2 in. (50 mm)

Code Fittings
Direct and Integral Mount Heads - Horizontal Line
HADM0 Direct Mount, with 5-Valve Manifold, Horizontal Line, Monel
HADMB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, Monel
HADMN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, Monel
HAMM0 Integral, with 3-Valve Manifold, Horizontal Line, Monel
Direct and Integral Mount Heads - Vertical Line
HVDM0 Direct Mount, with 5-Valve Manifold, Vertical Line, Monel
HVDMB Direct Mount, with 5-Valve Manifold, B31.1, Vertical Line, Monel
HVDMN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, Monel
HVMM0 Integral, with 3-Valve Manifold, Vertical Line, Monel
Remote Mount
HM1M0 Fittings, 1/4 in. MNPT, Monel
CP1C0 Needle Valve, Nipple, 1/4—18 NPT, CS
CP1S0 Needle Valve, Nipple, 1/4—18 NPT, SST
Diamond II+ Annubar®

SB1C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/4—18 NPT, CS
SB1S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/4—18 NPT, SST
SP1C0 Needle Valve, Nipple and Tee, 1/4—18 NPT, CS
SP1S0 Needle Valve, Nipple and Tee, 1/4—18 NPT, SST

Code Flanged Mount


FAM ANSI Class 150, Weld-Neck RF, Monel
FBM ANSI Class 300, Weld-Neck RF, Monel
FCM ANSI Class 600, Weld-Neck RF, Monel

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly


S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration

Code Optional Quality Assurance


QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number: DNF+10M 010 HAMM0 C0000 FAM

Flow-450
Rosemount Inc.

Ordering Information—Model DNW


MODEL DNW+10S
Model Product Description
DNW+10S Diamond II + Annubar® Primary Flow Element - In-line Butt Weld

Code Line Size


1
005 /2 in. (12.5 mm)
3
007 /4 in. (19 mm)
010 1 in. (25 mm)
012 11/4 in. (31 mm)
015 11/2 in. (37.5 mm)
020 2 in. (50 mm)

Code Fittings
Direct and Integral Mount Heads - Horizontal LIne
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
HAMS0 Integral, 3-Valve Manifold, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical LIne
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Direct, Vertical Line, SST
HVMS0 Integral, 3-Valve Manifold, Vertical Line, SST

Diamond II+ Annubar®


Remote Mount
HF1SS Fittings, 1/4 in. Socket Weld Ports, SST
HM1S0 Fittings, 1/4 in., MNPT, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
CP1C0 Needle Valve, Nipple, 1/4—18 NPT, CS
CP1S0 Needle Valve, Nipple, 1/4—18 NPT, SST
SB1C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/4—18 NPT, CS
SB1S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/4—18 NPT, SST
SP1C0 Needle Valve, Nipple and Tee, 1/4—18 NPT, CS
SP1S0 Needle Valve, Nipple and Tee, 1/4—18 NPT, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly


S4 Factory Assembly of DP Transmitter to DP Primary

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration

Code Optional Quality Assurance


QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number: DNW+10S 010 HAMS0 C0000

Flow-451
Diamond II+ Annubar®
Diamond II+ Annubar®

Flow-452
Rosemount Inc.

Diamond II+ Annubar®

Flow-453
Diamond II+ Annubar®
Diamond II+ Annubar®

Flow-454
Rosemount Inc.

Diamond II+ Annubar®

Flow-455
Diamond II+ Annubar®

Ordering Information—Model DMT


MODEL DMT+15S
Model Product Description
DMT+15S Diamond II + Annubar® Primary Flow Element - Threaded Flo-Tap, Medium Pressure

Code Line Size

020 2 in. (50 mm)


025 21/2 in. (63.5 mm)
030 3 in. (80 mm)
035 31/2 in. (89 mm)
040 4 in. (100 mm)
050 5 in. (125 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
HAMS0 Integral, with 3-Valve Manifold, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, with 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, with 3-Valve Manifold, Vertical Line, SST
Diamond II+ Annubar®

Remote Mount - Horizontal Line


HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Ports, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Ports, SST

Code Instrument Connections

Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS
Needle Valves - SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
CA2SS Needle Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
CP2SS Needle valve, Nipple, 1/2 in. Socket Weld Ports, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
Gate Valve - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS

Flow-456
Rosemount Inc.

MODEL DMT+15S
Code Instrument Connections (Continued)
Gate Valve - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Ports, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Ports, SST

Code Packing Gland


GR3S0 Graphite, 3/4—14 NPT, SST
GR3C0 Graphite, 3/4—14 NPT, CS
GM3S0 Urethane, 3/4—14 NPT, SST
GM3C0 Urethane, 3/4—14 NPT, CS

Code Insert/Retract
IMRS Manual, Single, SST Rod
IMRC Manual, Single, CS Rod
IMDS Wheel, Single, SST Rod
IMDC Wheel, Single, CS Rod

Code Isolation Valves

VT3SG Gate Valve, 3/4—14 NPT, SST


VT3SB Ball Valve, 3/4—14 NPT, SST
Gate Valve, 3/4—14 NPT, CS

Diamond II+ Annubar®


VT3CG
VT3CB Ball Valve, 3/4—14 NPT, CS

Code Mounting Hardware


MH3C0 Weld Coupling and Nipple, 3/4—14 NPT, CS
MH3S0 Weld Coupling and Nipple, 3/4—14 NPT, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, FM Explosion-Proof, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel

Code Optional Special Assembly


S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration

Code Optional Quality Assurance


QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number: DMT+15S 020 HAMS0 C0000 GR350 IMRS VT3SG MH3C0

Flow-457
Diamond II+ Annubar®

MODEL DMT+25S
Model Product Description
DMT+25S Diamond II + Annubar® Primary Flow Element - Threaded Flo-Tap, Medium Pressure

Code Line Size


040 4 in. (100 mm)
050 5 in. (125 mm)
060 6 in. (150 mm)
080 8 in. (200 mm)
100 10 in. (250 mm)
120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAMS0 Integral, with 3-Valve Manifold, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
Diamond II+ Annubar®

Direct and Integral Mount Heads - Horizontal Line with RTD


HATSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Horizontal Line, SST
HATSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Horizontal Line, SST
HATSD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, SST
HATS0 Integral, with 3-Valve Manifold, RTD, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, with 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, with 3-Valve Manifold, Vertical Line, SST
Direct and Integral Mount Heads - Vertical Line with RTD
HVTSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Vertical Line, SST
HVTSD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, SST
HVTSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Vertical Line, SST
HVTS0 Integral, with 3-Valve Manifold, RTD, Vertical Line, SST
Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Ports, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Ports, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valve - CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS

Flow-458
Rosemount Inc.

MODEL DMT+25S
Code Instrument Connections (Continued)
Needle Valve - SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
CA2SS Needle Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
CP2SS Needle valve, Nipple, 1/2 in. Socket Weld Ports, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
Gate Valve - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
Gate Valve - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Ports, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Ports, SST

Code Packing Gland

Graphite, 11/4—11.5 NPT, SST

Diamond II+ Annubar®


GR5S0
GR5C0 Graphite, 11/4—11.5 NPT, CS
GM5S0 Urethane, 11/4—11.5 NPT, SST
GM5C0 Urethane, 11/4—11.5 NPT, CS

Code Insert/Retract
IMRS Manual, Single, SST Rod
IMRC Manual, Single, CS Rod
IMDS Wheel, Single, SST Rod
IMDC Wheel, Single, CS Rod

Code Isolation Valve


VT5SG Gate Valve, 11/4—11.5 NPT, SST
VT5SB Ball Valve, 11/4—11.5 NPT, SST
VT5CG Gate Valve, 11/4—11.5 NPT, CS
VT5CB Ball Valve, 11/4—11.5 NPT, CS

Code Mounting Hardware


MH5C0 Weld Coupling and Nipple, 11/4—11.5 NPT, CS
MH5S0 Weld Coupling and Nipple, 11/4—11.5 NPT, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)

TRR Remote Thermowell and RTD


TXR Remote Thermowell and RTD, FM Explosion-Proof
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, FM Explosion-Proof, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel

Code Optional Special Assembly


S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration

M Lab Flow Calibration (Average K) (<10 in.


Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Flow-459
Diamond II+ Annubar®

MODEL DMT+25S
Code Optional Quality Assurance
QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number: DMT+25S 040 HAMS0 C0000 GR5S0 IMRS VT5SG MH5C0
Diamond II+ Annubar®

Flow-460
Rosemount Inc.

MODEL DMT+35S
Model Product Description
DMT+35S Diamond II + Annubar® Primary Flow Element - Threaded Flo-Tap, Medium Pressure

Code Line Size


080 8 in. (200 mm)
100 10 in. (250 mm)
120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)
480 48 in. (1210 mm)
600 60 in. 1520 mm)
720 72 in. (1820 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAMS0 Integral, with 3-Valve Manifold, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST

Diamond II+ Annubar®


Direct and Integral Mount Heads - Horizontal Line with RTD
HATSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Horizontal Line, SST
HATSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Horizontal Line, SST
HATSD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, SST
HATS0 Integral, with 3-Valve Manifold, RTD, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, with 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, with 3-Valve Manifold, Vertical Line, SST
Direct and Integral Mount Heads - Vertical Line with RTD
HVTSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Vertical Line, SST
HVTSD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, SST
HVTSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Vertical Line, SST
HVTS0 Integral, with 3-Valve Manifold, RTD, Vertical Line, SST
Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Ports, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Ports, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valve - CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS

Flow-461
Diamond II+ Annubar®

MODEL DMT+35S
Code Instrument Connections (Continued)
Needle Valve - SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
CA2SS Needle Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
CP2SS Needle valve, Nipple, 1/2 in. Socket Weld Ports, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
Gate Valve - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
Gate Valve - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Ports, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Ports, SST

Code Packing Gland


Diamond II+ Annubar®

GR8S0 Graphite, 2—11.5 NPT, SST


GR8C0 Graphite, 2—11.5 NPT, CS
GM8S0 Urethane, 2—11.5 NPT, SST
GM8C0 Urethane, 2—11.5 NPT, CS

Code Insert/Retract
IMRS Manual, Single, SST Rod
IMRC Manual, Single, CS Rod
IMDS Wheel, Single, SST Rod
IMDC Wheel, Single, CS Rod

Code Isolation Valves


VT8SG Gate Valve, 2—11.5 NPT, SST
VT8SB Ball Valve, 2—11.5 NPT, SST
VT8CG Gate Valve, 2—11.5 NPT, CS
VT8CB Ball Valve, 2—11.5 NPT, CS

Code Mounting Hardware


MH8C0 Weld Coupling and Nipple, 2—11.5 NPT, CS
MH8S0 Weld Coupling and Nipple, 2—11.5 NPT, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)

TRR Remote Thermowell and RTD


TXR Remote Thermowell and RTD, FM Explosion-Proof
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, FM Explosion-Proof, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel

Code Optional Special Assembly


S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration

M Lab Flow Calibration (Average K) (<10 in.)


Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Flow-462
Rosemount Inc.

MODEL DMT+35S
Code Optional Quality Assurance
QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number: DMT+35S 240 HAMS0 C0000 GR8S0 IMDS VT8SG MH8C0

Diamond II+ Annubar®

Flow-463
Diamond II+ Annubar®
Diamond II+ Annubar®

Flow-464
Rosemount Inc.

Diamond II+ Annubar®

Flow-465
Diamond II+ Annubar®
Diamond II+ Annubar®

Flow-466
Rosemount Inc.

Diamond II+ Annubar®

Flow-467
Diamond II+ Annubar®
Diamond II+ Annubar®

Flow-468
Rosemount Inc.

Ordering Information—Model DHT


MODEL DHT+15S
Model Product Description
DHT+15S Diamond II + Annubar® Primary Flow Element - Threaded Flo-Tap, High Pressure

Code Line Size

020 2 in. (50 mm)


025 21/2 in. (63.5 mm)
030 3 in. (80 mm)
035 31/2 in. (89 mm)
040 4 in. (100 mm)
050 5 in. (125 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
HAMS0 Integral, with 3-Valve Manifold, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, with 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, with 3-Valve Manifold, Vertical Line, SST

Diamond II+ Annubar®


Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Ports, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Ports, SST

Code Instrument Connections

Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS
Needle Valves - SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
CA2SS Needle Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
CP2SS Needle valve, Nipple, 1/2 in. Socket Weld Ports, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
Gate Valves - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
Gate Valves - CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS

Flow-469
Diamond II+ Annubar®

MODEL DHT+15S
Code Instrument Connections (Continued)
Gate Valves - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Ports, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Ports, SST

Code Packing Gland


GV3S0 Graphite, 3/4—14 NPT, SST
GV3C0 Graphite, 3/4—14 NPT, CS
GH3S0 Urethane, 3/4—14 NPT, SST
GH3C0 Urethane, 3/4—14 NPT, CS

Code Insert/Retract
IHRS Manual, Dual, SST Rods
IHRC Manual, Dual, CS Rods

Code Isolation Valves

VT3SG Gate Valve, 2—11.5 NPT, SST


VT3SB Ball Valve, 2—11.5 NPT, SST
VT3CG Gate Valve, 2—11.5 NPT, CS
VT3CB Ball Valve, 2—11.5 NPT, CS
Diamond II+ Annubar®

Code Mounting Hardware


MH3C0 Weld Coupling and Nipple, 3/4—14 NPT, CS
MH3S0 Weld Coupling and Nipple, 3/4—14 NPT, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly


S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration

Code Optional Quality Assurance


QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number: DHT+15S 020 HAMS0 C0000 GV3S0 IHRS VT3SG MH3C0

Flow-470
Rosemount Inc.

MODEL DHT+25S
Model Product Description
DHT+25S Diamond II + Annubar® Primary Flow Element - Threaded Flo-Tap, High Pressure

Code Line Size


040 4 in. (100 mm)
050 5 in. (125 mm)
060 6 in. (150 mm)
080 8 in. (200 mm)
100 10 in. (250 mm)
120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
HAMS0 Integral, with 3-Valve Manifold, Horizontal Line, SST

Diamond II+ Annubar®


Direct and Integral Mount Heads - Horizontal Line with RTD
HATSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Horizontal Line, SST
HATSD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, SST
HATSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Horizontal Line, SST
HATS0 Integral, with 3-Valve Manifold, RTD, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, with 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, with 3-Valve Manifold, Vertical Line, SST
Direct and Integral Mount Heads - Vertical Line with RTD
HVTSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Vertical Line, SST
HVTSD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, SST
HVTSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Vertical Line, SST
HVTS0 Integral, with 3-Valve Manifold, RTD, Vertical Line, SST
Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Ports, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Ports, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS

Flow-471
Diamond II+ Annubar®

MODEL DHT+25S
Code Instrument Connections (Continued)
Needle Valves - SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
CA2SS Needle Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
CP2SS Needle valve, Nipple, 1/2 in. Socket Weld Ports, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
Gate Valve - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
Gate Valve - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Ports, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Ports, SST

Code Packing Gland

Graphite, 11/4—11.5 NPT, SST


Diamond II+ Annubar®

GV5S0
GV5C0 Graphite, 11/4—11.5 NPT, CS
GH5S0 Urethane, 11/4—11.5 NPT, SST
GH5C0 Urethane, 11/4—11.5 NPT, CS

Code Insert/Retract
IHRS Manual, Dual, SST Rods
IHRC Manual, Dual, CS Rods
IHDS Gear, Dual, SST Rods

Code Isolation Valves

VT5SG Gate Valve, 11/4—11.5 NPT, SST


VT5SB Ball Valve, 11/4—11.5 NPT, SST
VT5CG Gate Valve, 11/4—11.5 NPT, CS
VT5CB Ball Valve, 11/4—11.5 NPT, CS

Code Mounting Hardware


MH5C0 Weld Coupling and Nipple, 11/4—11.5 NPT, CS
MH5S0 Weld Coupling and Nipple, 11/4—11.5 NPT, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, FM Explosion-Proof, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel

Code Optional Special Assembly


S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Flow-472
Rosemount Inc.

MODEL DHT+25S
Code Optional Quality Assurance
QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number: DHT+25S 040 HAMS0 C0000 GV5S0 IHRS VT5SG MH5C0

Diamond II+ Annubar®

Flow-473
Diamond II+ Annubar®

MODEL DHT+35S
Model Product Description
DHT+35S Diamond II + Annubar® Primary Flow Element- Threaded Flo-Tap, High Pressure

Code Line Size


080 8 in. (200 mm)
100 10 in. (250 mm)
120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)
480 48 in. (1210 mm)
600 60 in. 1520 mm)
720 72 in. (1820 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
HAMS0 Integral, with 3-Valve Manifold, Horizontal Line, SST
Diamond II+ Annubar®

Direct and Integral Mount Heads - Horizontal Line with RTD


HATSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Horizontal Line, SST
HATSD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, SST
HATSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Horizontal Line, SST
HATS0 Integral, with 3-Valve Manifold, RTD, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, with 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, with 3-Valve Manifold, Vertical Line, SST
Direct and Integral Mount Heads - Vertical Line with RTD
HVTSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Vertical Line, SST
HVTSD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, SST
HVTSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Vertical Line, SST
HVTS0 Integral, with 3-Valve Manifold, RTD, Vertical Line, SST
Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Ports, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Ports, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS

Flow-474
Rosemount Inc.

MODEL DHT+35S
Code Instrument Connections (Continued)
Needle Valves - SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
CA2SS Needle Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
CP2SS Needle valve, Nipple, 1/2 in. Socket Weld Ports, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
Gate Valves - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
Gate Valves - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Ports, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Ports, SST

Code Packing Gland

Diamond II+ Annubar®


GV8S0 Graphite, 2—11.5 NPT, SST
GV8C0 Graphite, 2—11.5 NPT, CS
GH8S0 Urethane, 2—11.5 NPT, SST
GH8C0 Urethane, 2—11.5 NPT, CS

Code Insert/Retract
IHRS Manual, Dual, SST Rods
IHRC Manual, Dual, CS Rods
IHDS Gear, Dual, SST Rods

Code Isolation Valves

VT8SG Gate Valve, 2—11.5 NPT, SST


VT8SB Ball Valve, 2—11.5 NPT, SST
VT8CG Gate Valve, 2—11.5 NPT, CS
VT8CB Ball Valve, 2—11.5 NPT, CS

Code Mounting Hardware


MH8C0 Weld Coupling and Nipple, 2—11.5 NPT, CS
MH8S0 Weld Coupling and Nipple, 2—11.5 NPT, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, FM Explosion-Proof, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel

Code Optional Special Assembly


S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Flow-475
Diamond II+ Annubar®

MODEL DHT+35S
Code Optional Quality Assurance
QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number: DHT+35S 120 HAMS0 C0000 GV8S0 IHDS VT8SG MH8C0
Diamond II+ Annubar®

Flow-476
Rosemount Inc.

Diamond II+ Annubar®

Flow-477
Diamond II+ Annubar®
Diamond II+ Annubar®

Flow-478
Rosemount Inc.

Diamond II+ Annubar®

Flow-479
Diamond II+ Annubar®
Diamond II+ Annubar®

Flow-480
Rosemount Inc.

Diamond II+ Annubar®

Flow-481
Diamond II+ Annubar®

Ordering Information—Model DHF


MODEL DHF+15S
Model Product Description
DHF+15S Diamond II Annubar® Primary Flow Element - Flanged Flo-Tap

Code Line Size

020 2 in. (50 mm)


025 21/2 in. (63.5 mm)
030 3 in. (80 mm)
035 31/2 in. (89 mm)
040 4 in. (100 mm)
050 5 in. (125 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
HAMS0 Integral, with 3-Valve Manifold, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, with 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, with 3-Valve Manifold, Vertical Line, SST
Diamond II+ Annubar®

Remote Mount - Horizontal Line


HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Ports, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Ports, SST

Code Instrument Connections

Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valve - CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS
Needle Valve - SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
CA2SS Needle Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
CP2SS Needle valve, Nipple, 1/2 in. Socket Weld Ports, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
Gate Valve - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS

Flow-482
Rosemount Inc.

MODEL DHF+15S
Code Instrument Connections (Continued)
Gate Valve - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Ports, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Ports, SST

Code Packing Gland


GV4SC Graphite, 1 in. ANSI Class 600, SST
GV4SB Graphite, 1 in. ANSI Class 300, SST
GV4SA Graphite, 1 in. ANSI Class 150, SST
GH4SC Urethane, 1 in. ANSI Class 600, SST
GH4SB Urethane, 1 in. ANSI Class 300, SST
GH4SA Urethane, 1 in. ANSI Class 150, SST

Code Insert/Retract
IHRS Manual, Dual, SST Rods
IHRC Manual, Dual, CS Rods

Code Isolation Valves

Gate Valve - CS
VC4CG Gate Valve, 1 in. ANSI Class 600, CS

Diamond II+ Annubar®


VB4CG Gate Valve, 1 in. ANSI Class 300, CS
VA4CG Gate Valve, 1 in. ANSI Class 150, CS
Gate Valve - SST
VC4SG Gate Valve, 1 in. ANSI Class 600, SST
VB4SG Gate Valve, 1 in. ANSI Class 300, SST
VA4SG Gate Valve, 1 in. ANSI Class 150, SST
Ball Valve - CS
VB4CB Ball Valve, 1 in. ANSI Class 300, CS
VA4CB Ball Valve, 1 in. ANSI Class 150, CS
Ball Valve - SST
VB4SB Ball Valve, 1 in. ANSI Class 300, SST
VA4SB Ball Valve, 1 in. ANSI Class 150, SST

Code Flanged Mount

FJMC DIN 25 PN 16, CS


FJMS DIN 25 PN 16, 316SST
FLMC DIN 25 PN 40, CS
FLMS DIN 25 PN 40, 316SST
FNMC DIN 25 PN 100, CS
FNMS DIN 25 PN 100, 316SST
FA4C 1 in. ANSI Class 150, Weld-Neck RF, CS
FA4S 1 in. ANSI Class 150, Weld-Neck RF, SST
FB4C 1 in. ANSI Class 300, Weld-Neck RF, CS
FB4S 1 in. ANSI Class 300, Weld-Neck RF, SST
FC4C 1 in. ANSI Class 600, Weld-Neck RF, CS
FC4S 1 in. ANSI Class 600, Weld-Neck RF, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, FM Explosion-Proof, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly


S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration

Flow-483
Diamond II+ Annubar®

MODEL DHF+15S
Code Optional Quality Assurance
QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DHF+15S 020 HAMS0 C0000 GV4SA IHRS VA4SG FA4C
Diamond II+ Annubar®

Flow-484
Rosemount Inc.

MODEL DHF+25S
Model Product Description
DHF+25S Diamond II + Annubar® Primary Flow Element - Flanged Flo-Tap

Code Line Size


040 4 in. (100 mm)
050 5 in. (125 mm)
060 6 in. (150 mm)
080 8 in. (200 mm)
100 10 in. (250 mm)
120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
HAMS0 Integral, with 3-Valve Manifold, Horizontal Line, SST

Diamond II+ Annubar®


Direct and Integral Mount Heads - Horizontal Line with RTD
HATSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Horizontal Line, SST
HATSD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, SST
HATSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Horizontal Line, SST
HATS0 Integral, with 3-Valve Manifold, RTD, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, with 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, with 3-Valve Manifold, Vertical Line, SST
Direct and Integral Mount Heads - Vertical Line with RTD
HVTSB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Vertical Line, SST
HVTSD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, SST
HVTSN Direct Mount, with 5-Valve Manifold, RTD, NACE, Vertical Line, SST
HVTS0 Integral, with 3-Valve Manifold, RTD, Vertical Line, SST
Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, SST
HAHS0 Axial, HP, Horizontal Line, 1/2—14 NPT, SST
HAHSS Axial, HP, Horizontal Line, 1/2 in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line,1/2 in. Socket Weld Ports, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, 1/2—14NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Ports, SST
HVHS0 Axial, HP, Vertical Line, 1/2—14 NPT, SST
HVHSS Axial, HP, Vertical Line, 1/2 in. Socket Weld Ports, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valve - CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS

Flow-485
Diamond II+ Annubar®

MODEL DHF+25S
Code Instrument Connections (Continued)
Needle Valve - SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
CA2SS Needle Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
CP2SS Needle valve, Nipple, 1/2 in. Socket Weld Ports, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
Gate Valve - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
Gate Valve - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in. Socket Weld Ports, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Ports, SST

Code Packing Gland

Graphite, 11/2 in. ANSI Class 600, SST


Diamond II+ Annubar®

GV6SC
GV6SB Graphite, 11/2 in. ANSI Class 300, SST
GV6SA Graphite, 11/2 in. ANSI Class 150, SST
GH6SC Urethane, 11/2 in. ANSI Class 600, SST
GH6SB Urethane, 11/2 in. ANSI Class 300, SST
GH6SA Urethane, 11/2 in. ANSI Class 150, SST

Code Insert/Retract
IHRS Manual, Dual, SST Rods
IHRC Manual, Dual, CS Rods
IHDS Gear, Dual, SST Rods
IHDC Gear, Dual, CS Rods

Code Isolation Valves


Gate Valve - CS
VC6CG Gate Valve, 11/2 in. ANSI Class 600, CS
VB6CG Gate Valve, 11/2 in. ANSI Class 300, CS
VA6CG Gate Valve, 11/2 in. ANSI Class 150, CS
Gate Valve - SST
VC6SG Gate Valve, 11/2 in. ANSI Class 600, SST
VB6SG Gate Valve, 11/2 in. ANSI Class 300, SST
VA6SG Gate Valve, 11/2 in. ANSI Class 150, SST
Ball Valve - CS
VB6CB Ball Valve, 11/2 in. ANSI Class 300, CS
VA6SB Ball Valve, 11/2 in. ANSI Class 150, SST
Ball Valve - SST
VB6SB Ball Valve, 11/2 in. ANSI Class 300, SST
VA6SB Ball Valve, 11/2 in. ANSI Class 150, SST

Code Flanged Mount


FA6C 11/2 in. ANSI Class 150, Weld-Neck RF, CS
FA6S 11/2 in. ANSI Class 150, Weld-Neck RF, SST
FB6C 11/2 in. ANSI Class 300, Weld-Neck RF, CS
FB6S 11/2 in. ANSI Class 300, Weld-Neck RF, SST
FC6C 11/2 in. ANSI Class 600, Weld-Neck RF, CS
FC6S 11/2 in. ANSI Class 600, Weld-Neck RF, SST
FE8C 2 in. ANSI Class 900/1500, Weld-Neck RF, CS
FE8S 2 in. ANSI Class 1500, Weld-Neck RF, SST

Flow-486
Rosemount Inc.

MODEL DHF+25S
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, FM Explosion-Proof, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly

S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Code Optional Quality Assurance

QA1 Dieterich Program


Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91

Diamond II+ Annubar®


QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DHF+25S 040 HAMS0 C0000 GV4SA IHRC VA6CG FA6C

Flow-487
Diamond II+ Annubar®

MODEL DHF+25H
Model Product Description
DHF+25H Diamond II + Annubar® Primary Flow Element - Flanged Flo-Tap

Code Line Size


040 4 in. (100 mm)
050 5 in. (125 mm)
060 6 in. (150 mm)
080 8 in. (200 mm)
100 10 in. (250 mm)
120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)

Code Head Style

Direct and Integral Mount Heads - Horizontal Line


HADH0 Direct Mount, with 5-Valve Manifold, Horizontal Line, Hastelloy-C
HADHB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, Hastelloy-C
HADHN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, Hastelloy-C
HAPH0 Direct Mount, No Manifold, Horizontal Line, Hastelloy-C
HAMH0 Integral, with 3-Valve Manifold, Horizontal Line, Hastelloy-C
Direct and Integral Mount Heads - Horizontal Line with RTD
HATHD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, Hastelloy-C
HATHN Direct Mount, with 5-Valve Manifold, RTD, NACE, Horizontal Line, Hastelloy-C
HATHB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Horizontal Line, Hastelloy-C
Diamond II+ Annubar®

HATH0 Integral, with 3-Valve Manifold, RTD, Horizontal Line, Hastelloy-C


Direct and Integral Mount Heads - Vertical Line
HVDH0 Direct Mount, with 5-Valve Manifold, Vertical Line, Hastelloy-C
HVDHB Direct Mount, with 5-Valve Manifold, B31.1, Vertical Line, Hastelloy-C
HVDHN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, Hastelloy-C
HVPH0 Direct Mount, No Manifold, Vertical Line, Hastelloy-C
HVMH0 Integral, with 3-Valve Manifold, Vertical Line, Hastelloy-C
Direct and Integral Mount Heads - Vertical Line with RTD
HVTHB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Vertical Line, Hastelloy-C
HVTHD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, Hastelloy-C
HVTHN Direct Mount, with 5-Valve Manifold, RTD, NACE, Vertical Line, Hastelloy-C
HVTH0 Integral, with 3-Valve Manifold, RTD, Vertical Line, Hastelloy-C
Remote Mount - Horizontal Line
HA2H0 Axial, Horizontal Line, 1/2—14 NPT, Hastelloy-C
HA2HS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, Hastelloy-C
HAHH0 Axial, HP, Horizontal Line, 1/2—14 NPT, Hastelloy-C
Remote Mount - Horizontal Line
HAHHS Axial, HP, Horizontal Line, 1/2 in. Socket Weld Ports, Hastelloy-C
HP2H0 Parallel, Horizontal Line, 1/2—14 NPT, Hastelloy-C
Remote Mount - Vertical Line
HPVH0 Parallel, Vertical Line, 1/2—14 NPT, Hastelloy-C
HV2H0 Axial, Vertical Line, 1/2—14 NPT, Hastelloy-C
HVHH0 Axial, HP, Vertical Line, 1/2—14 NPT, Hastelloy-C
HVHHS Axial, HP, Vertical Line, 1/2 in. Socket Weld Ports, Hastelloy-C

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valve - CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS
Needle Valve - SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST

Flow-488
Rosemount Inc.

MODEL DHF+25H
Code Instrument Connections (Continued)
Gate Valve - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
Gate Valve - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
Needle Valve - Hastelloy-C
CA2H0 Needle Valve, Elbow, 1/2—14 NPT, Hastelloy-C
CP2H0 Needle Valve, Nipple, 1/2—14 NPT, Hastelloy-C

Code Packing Glands

GV6HC Graphite, 11/2 in. ANSI Class 600, Hastelloy-C


GV6HB Graphite, 11/2 in. ANSI Class 300, Hastelloy-C
GV6HA Graphite, 11/2 in. ANSI Class 150, Hastelloy-C

Code Insert/Retract
IHRS Manual, Dual, SST Rods
IHRC Manual, Dual, CS Rods
IHDS Gear, Dual, SST Rods

Diamond II+ Annubar®


IHDC Gear, Dual, CS Rods

Code Isolation Valves

Gate Valve - CS
VC6CG Gate Valve, 11/2 in. ANSI Class 600, CS
VB6CG Gate Valve, 11/2 in. ANSI Class 300, CS
VA6CG Gate Valve, 11/2 in. ANSI Class 150, CS
Gate Valve - SST
VC6SG Gate Valve, 11/2 in. ANSI Class 600, SST
VB6SG Gate Valve, 11/2 in. ANSI Class 300, SST
VA6SG Gate Valve, 11/2 in. ANSI Class 150, SST
Ball Valve - CS
VB6CB Ball Valve, 11/2 in. ANSI Class 300, CS
VA6CB Ball Valve, 11/2 in. ANSI Class 150, CS
Ball Valve - SST
VB6SB Ball Valve, 11/2 in. ANSI Class 300, SST
VA6SB Ball Valve, 11/2 in. ANSI Class 150, SST

Code Flanged Mount

FA6C 11/2 in. ANSI Class 150, Weld-Neck RF, CS


FA6S 11/2 in. ANSI Class 150, Weld-Neck RF, SST
FB6C 1 1/2 in. ANSI Class 300, Weld-Neck RF, CS
FB6S 11/2 in. ANSI Class 300, Weld-Neck RF, SST
FC6C 11/2 in. ANSI Class 600, Weld-Neck RF, CS
FC6S 11/2 in. ANSI Class 600, Weld-Neck RF, SST
FE8C 2 in. ANSI Class 900/1500, Weld-Neck RF, CS
FE8S 2 in. ANSI Class 1500, Weld-Neck RF, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, FM Explosion-Proof, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly


S4 Factory Assembly of DP Transmitter to DP primary

Flow-489
Diamond II+ Annubar®

MODEL DHF+25H
Code Optional Calibration
M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Code Optional Quality Assurance

QA1 Dieterich Program


Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DHF+25H 040 HAMH0 C0000 GV6HA IHRS VA6SG FA6C
Diamond II+ Annubar®

Flow-490
Rosemount Inc.

MODEL DHF + 25M


Model Product Description
DHF+25M Diamond II + Annubar® Primary Flow Element - Flanged Flo-Tap

Code Line Size


040 4 in. (100 mm)
050 5 in. (125 mm)
060 6 in. (150 mm)
080 8 in. (200 mm)
100 10 in. (250 mm)
120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HADM0 Direct Mount, with 5-Valve Manifold, Horizontal Line, Monel
HADMB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, Monel
HADMN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, Monel
HAPM0 Direct Mount, No Manifold, Horizontal Line, Monel
HAMM0 Integral, with 3-Valve Manifold, Horizontal Line, Monel

Diamond II+ Annubar®


Direct and Integral Mount Heads - Horizontal Line with RTD
HATMD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, Monel
HATMN Direct Mount, with 5-Valve Manifold, RTD, NACE, Horizontal Line, Monel
HATMB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Horizontal Line, Monel
HATM0 Integral, with 3-Valve Manifold, RTD, Horizontal Line, Monel
Direct and Integral Mount Heads - Vertical Line
HVDM0 Direct Mount, with 5-Valve Manifold, Vertical Line, Monel
HVDMB Direct Mount, with 5-Valve Manifold, B31.1, Vertical Line, Monel
HVDMN Direct Mount, with 5-Valve Manifold, NACE, Vertical Line, Monel
HVPM0 Direct Mount, No Manifold, Vertical Line, Monel
HVMM0 Integral, with 3-Valve Manifold, Vertical Line, Monel
Direct and Integral Mount Heads - Vertical Line with RTD
HVTMB Direct Mount, with 5-Valve Manifold, RTD, B31.1, Vertical Line, Monel
HVTMD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, Monel
HVTMN Direct Mount, with 5-Valve Manifold, RTD, NACE, Vertical Line, Monel
HVTM0 Integral, with 3-Valve Manifold, RTD, Vertical Line, Monel
Remote Mount - Horizontal Line
HA2M0 Axial, Horizontal Line, 1/2—14 NPT, Monel
HA2MS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, Monel
HAHM0 Axial, HP, Horizontal Line, 1/2—14 NPT, Monel
HAHMS Axial, HP, Horizontal Line, 1/2 in. Socket Weld Ports, Monel
HP2M0 Parallel, Horizontal Line, 1/2—14 NPT, Monel
Remote Mount - Vertical Line
HPVM0 Parallel, Vertical Line, 1/2—14 NPT, Monel
HV2M0 Axial, Vertical Line, 1/2—14 NPT, Monel
HV2MS Axial, Vertical Line, 1/2 in. Socket Weld Ports, Monel
HVHM0 Axial, HP, Vertical Line, 1/2—14 NPT, Monel
HVHMS Axial, HP, Vertical Line, 1/2 in. Socket Weld Ports, Monel

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valve - CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS

Flow-491
Diamond II+ Annubar®

MODEL DHF + 25M


Code Instrument Connections (Continued)
Needle Valve - SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
Needle Valve - Monel
CA2M0 Needle Valve, Elbow, 1/2—14 NPT, Monel
CP2M0 Needle Valve, Nipple, 1/2—14 NPT, Monel
Gate Valve - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
Gate Valve - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST

Code Packing Glands


GV6MC Graphite, 11/2 in. ANSI Class 600, Monel
GV6MB Graphite, 11/2 in. ANSI Class 300, Monel
GV6MA Graphite, 11/2 in. ANSI Class 150, Monel
Diamond II+ Annubar®

Code Insert/Retract
IHRS Manual, Dual, SST Rods
IHRC Manual, Dual, CS Rods
IHDS Gear, Dual, SST Rods
IHDC Gear, Dual, CS Rods

Code Isolation Valves


Gate Valve - CS
VC6CG Gate Valve, 11/2 in. ANSI Class 600, CS
VB6CG Gate Valve, 11/2 in. ANSI Class 300, CS
VA6CG Gate Valve, 1 in. ANSI Class 150, CS
Gate Valve - SST
VC6SG Gate Valve, 11/2 in. ANSI Class 600, SST
VB6SG Gate Valve, 11/2 in. ANSI Class 300, SST
VA6SG Gate Valve, 11/2 in. ANSI Class 150, SST
Ball Valve - CS
VB6CB Ball Valve, 11/2 in. ANSI Class 300, CS
VA6CB Ball Valve, 11/2 in. ANSI Class 150, CS
Ball Valve - SST
VB6SB Ball Valve, 11/2 in. ANSI Class 300, SST
VA6SB Ball Valve, 11/2 in. ANSI Class 150, SST

Code Flanged Mount


FA6C 11/2 in. ANSI Class 150, Weld-Neck RF, CS
FA6S 11/2 in. ANSI Class 150, Weld-Neck RF, SST
FB6C 11/2 in. ANSI Class 300, Weld-Neck RF, CS
FB6S 11/2 in. ANSI Class 300, Weld-Neck RF, SST
FC6C 11/2 in. ANSI Class 600, Weld-Neck RF, CS
FC6S 11/2 in. ANSI Class 600, Weld-Neck RF, SST
FE8C 2 in. ANSI Class 900/1500, Weld-Neck RF, CS
FE8S 2 in. ANSI Class 1500, Weld-Neck RF, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)

TRA Integral RTD, Axial Head


TRP Integral RTD, Parallel Head
TXA Integral RTD, FM Explosion-Proof, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Flow-492
Rosemount Inc.

MODEL DHF + 25M


Code Optional Special Assembly
S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Code Optional Quality Assurance


QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DHF+25M 040 HAMM0 C0000 GV6MA IHRS VA6SG FA6C

Diamond II+ Annubar®

Flow-493
Diamond II+ Annubar®

MODEL DHF+35S
Model Product Description
DHF+35S Diamond II + Annubar® Primary Flow Element - Flanged Flo-Tap

Code Line Size


080 8 in. (200 mm)
100 10 in. (250 mm)
120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)
480 48 in. (1210 mm)
600 60 in. 1520 mm)
720 72 in. (1820 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
HAMS0 Integral, 3-Valve Manifold, Horizontal Line, SST
Diamond II+ Annubar®

Direct and Integral Mount Heads - Horizontal Line with RTD


HATSB Direct Mount, 5-Valve Manifold, RTD, B31.1, Horizontal Line, SST
HATSD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, SST
HATSN Direct Mount, 5-Valve Manifold, RTD, NACE, Horizontal Line, SST
HATS0 Integral, 3-Valve Manifold, RTD, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, 3-Valve Manifold, Vertical Line, SST
Direct and Integral Mount Heads - Vertical Line with RTD
HVTSB Direct Mount, 5-Valve Manifold, RTD, B31.1, Vertical Line, SST
HVTSD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, SST
HVTSN Direct Mount, 5-Valve Manifold, RTD, NACE, Vertical Line, SST
HVTS0 Integral, 3-Valve Manifold, RTD, Vertical Line, SST
Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Ports, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Ports, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS

Flow-494
Rosemount Inc.

MODEL DHF+35S
Code Instrument Connections (Continued)
Needle Valve - SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
CA2SS Needle Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
CP2SS Needle Valve, Nipple, 1/2 in. Socket Weld Ports, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
Gate Valve - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
Gate Valve - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in., Socket Weld Port, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Ports, SST

Code Packing Glands

Diamond II+ Annubar®


GV8SC Graphite, 2 in. ANSI Class 600, SST
GV8SB Graphite, 2 in. ANSI Class 300, SST
GV8SA Graphite, 2 in. ANSI Class 150, SST
GH8SC Urethane, 2 in. ANSI Class 600, SST
GH8SB Urethane, 2 in. ANSI Class 300, SST
GH8SA Urethane, 2 in. ANSI Class 150, SST

Code Insert/Retract
IHRS Manual, Dual, SST Rods
IHRC Manual, Dual, CS Rods
IHDS Gear, Dual, SST Rods
IHDC Gear, Dual, CS Rods

Code Isolation Valve


Gate Valve - CS
VB8CG Gate Valve, 2 in. ANSI Class 300, CS
VA8CG Gate Valve, 2 in. ANSI Class 150, CS
Gate Valve - SST
VB8SG Gate Valve, 2 in. ANSI Class 300, SST
VA8SG Gate Valve, 2 in. ANSI Class 150, SST
Ball Valve - CS
VB8CB Ball Valve, 2 in. ANSI Class 300, CS
VA8CB Ball Valve, 2 in. ANSI Class 150, CS
Ball Valve - SST
VB8SB Ball Valve, 2 in. ANSI Class 300, SST
VA8SB Ball Valve, 2 in. ANSI Class 150, SST

Code Flanged Mount


FA8C 2 in. ANSI Class 150, Weld-Neck RF, CS
FA8S 2 in. ANSI Class 150, Weld-Neck RF, SST
FB8C 2 in. ANSI Class 300, Weld-Neck RF, CS
FB8S 2 in. ANSI Class 300, Weld-Neck RF, SST
FC8C 2 in. ANSI Class 600, Weld-Neck RF, CS
FC8S 2 in. ANSI Class 600, Weld-Neck RF, SST

Flow-495
Diamond II+ Annubar®

MODEL DHF+35S
Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, FM Explosion-Proof, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly

S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Code Optional Quality Assurance

QA1 Dieterich Program


Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
Diamond II+ Annubar®

QJ2 Special Product Drawing


QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DHF+35S 120 HAMS0 C0000 GV8SA IHDS VA8SG FA8C

Flow-496
Rosemount Inc.

MODEL DHF+45S
Model Product Description
DHF+45S Diamond II + Annubar® Primary Flow Element - Flanged Flo-Tap

Code Line Size


100 10 in. (250 mm)
120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)
480 48 in. (1210 mm)
600 60 in. 1520 mm)
720 72 in. (1820 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HADS0 Direct Mount, with 5-Valve Manifold, Horizontal Line, SST
HADSB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, SST
HADSN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, SST
HAPS0 Direct Mount, No Manifold, Horizontal Line, SST
HAMS0 Integral, 3-Valve Manifold, Horizontal Line, SST
Direct and Integral Mount Heads - Horizontal Line with RTD

Diamond II+ Annubar®


HATSB Direct Mount, 5-Valve Manifold, RTD, B31.1, Horizontal Line, SST
HATSD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, SST
HATSN Direct Mount, 5-Valve Manifold, RTD, NACE, Horizontal Line, SST
HATS0 Integral, 3-Valve Manifold, RTD, Horizontal Line, SST
Direct and Integral Mount Heads - Vertical Line
HVDS0 Direct Mount, with 5-Valve Manifold, Vertical Line, SST
HVDSB Direct Mount, 5-Valve Manifold, B31.1, Vertical Line, SST
HVDSN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, SST
HVPS0 Direct Mount, No Manifold, Vertical Line, SST
HVMS0 Integral, 3-Valve Manifold, Vertical Line, SST
Direct and Integral Mount Heads - Vertical Line with RTD
HVTSB Direct Mount, 5-Valve Manifold, RTD, B31.1, Vertical Line, SST
HVTSD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, SST
HVTSN Direct Mount, 5-Valve Manifold, RTD, NACE, Vertical Line, SST
HVTS0 Integral, 3-Valve Manifold, RTD, Vertical Line, SST
Remote Mount - Horizontal Line
HA2S0 Axial, Horizontal Line, 1/2—14 NPT, SST
HA2SS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, SST
HP2S0 Parallel, Horizontal Line, 1/2—14 NPT, SST
HP2SS Parallel, Horizontal Line, 1/2 in. Socket Weld Ports, SST
Remote Mount - Vertical Line
HPVS0 Parallel, Vertical Line, 1/2 in. Socket Weld Ports, SST
HPVSS Parallel, Vertical Line, 1/2—14 NPT, SST
HV2S0 Axial, Vertical Line, 1/2—14 NPT, SST
HV2SS Axial, Vertical Line, 1/2 in. Socket Weld Ports, SST

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CA2C0 Needle Valve, Elbow, 1/2—14 NPT, CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SA2C0 Needle Valve, Elbow and Tee, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS

Flow-497
Diamond II+ Annubar®

MODEL DHF+45S
Code Instrument Connections (Continued)
Needle Valve - SST
CA2SS Needle Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CA2S0 Needle Valve, Elbow, 1/2—14 NPT, SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
SA2S0 Needle Valve, Elbow and Tee, 1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
CP2SS Needle valve, Nipple, 1/2 in. Socket Weld Ports, SST
SP2SS Needle Valve, Nipple and Tee, 1/2 in. Socket Weld Ports, SST
Gate Valve - CS
CB2C0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SB2C0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS
Gate Valve - SST
CB2S0 Outside Stem and Yoke Gate Valve, Elbow, 1/2—14 NPT, SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
SB2S0 Outside Stem and Yoke Gate Valve, Elbow and Tee, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST
CB2SS Outside Stem and Yoke Gate Valve, Elbow, 1/2 in. Socket Weld Ports, SST
CC2SS Outside Stem and Yoke Gate Valve, Nipple, 1/2 in.,Socket Weld Port, SST
SV2SS Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2 in. Socket Weld Ports, SST

Code Packing Glands


Diamond II+ Annubar®

GVDHC Graphite, 3 in. ANSI Class 600, Hastelloy-C


GVDHB Graphite, 3 in. ANSI Class 300, Hastelloy-C
GVDHA Graphite, 3 in. ANSI Class 150, Hastelloy-C

Code Insert/Retract
IHRS Manual, Dual, SST Rods
IHRC Manual, Dual, CS Rods
IHDS Gear, Dual, SST Rods
IHDC Gear, Dual, CS Rods

Code Isolation Valve

Gate Valve - CS
VCDCG Gate Valve, 3 in. ANSI Class 600, CS
VBDCG Gate Valve, 3 in. ANSI Class 300, CS
VADCG Gate Valve, 3 in. ANSI Class 150, CS
Gate Valve - SST
VCDSG Gate Valve, 3 in. ANSI Class 600, SST
VBDSG Gate Valve, 3 in. ANSI Class 300, SST
VADSG Gate Valve, 3 in. ANSI Class 150, SST
Ball Valve - CS
VBDCB Ball Valve, 3 in. ANSI Class 300, CS
VADCB Ball Valve, 3 in. ANSI Class 150, CS
Ball Valve - SST
VBDSB Ball Valve, 3 in. ANSI Class 300, SST
VADSB Ball Valve, 3 in. ANSI Class 150, SST

Code Flanged Mount

FADC 3 in. ANSI Class 150, Weld-Neck RF, CS


FADS 3 in. ANSI Class 150, Weld-Neck RF, SST
FBDC 3 in. ANSI Class 300, Weld-Neck RF, CS
FBDS 3 in. ANSI Class 300, Weld-Neck RF, SST
FCDC 3 in. ANSI Class 600, Weld-Neck RF, CS
FCDS 3 in. ANSI Class 600, Weld-Neck RF, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, FM Explosion-Proof, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Flow-498
Rosemount Inc.

MODEL DHF+45S
Code Optional Special Assembly
S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Code Optional Quality Assurance


QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DHF+45S 240 HAMS0 C0000 GVDHA IHDS VADSG FADC

Diamond II+ Annubar®

Flow-499
Diamond II+ Annubar®

MODEL DHF+45H
Model Product Description
DHF+45H Diamond II + Annubar® Primary Flow Element - Flanged Flo-Tap

Code Line Size


100 10 in. (250 mm)
120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)
480 48 in. (1210 mm)
600 60 in. 1520 mm)
720 72 in. (1820 mm)

Code Head Style


Direct and Integral Mount Heads - Horizontal Line
HADH0 Direct Mount, with 5-Valve Manifold, Horizontal Line, Hastelloy-C
HADHB Direct Mount, with 5-Valve Manifold, B31.1,Horizontal Line, Hastelloy-C
HADHN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, Hastelloy-C
HAPH0 Direct Mount, No Manifold, Horizontal Line, Hastelloy-C
HAMH0 Integral, 3-Valve Manifold, Horizontal Line, Hastelloy-C
Direct and Integral Mount Heads - Horizontal Line with RTD
Diamond II+ Annubar®

HATHD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, Hastelloy-C
HATHN Direct Mount, 5-Valve Manifold, RTD, NACE, Horizontal Line, Hastelloy-C
HATHB Direct Mount, 5-Valve Manifold, RTD, B31.1, Horizontal Line, Hastelloy-C
HATH0 Integral, 3-Valve Manifold, RTD, Horizontal Line, Hastelloy-C
Direct and Integral Mount Heads - Vertical Line
HVDH0 Direct Mount, with 5-Valve Manifold, Vertical Line, Hastelloy-C
HVDHB Direct Mount, 5-Valve Manifold, B31.1, Vertical Line, Hastelloy-C
HVDHN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, Hastelloy-C
HVPH0 Direct Mount, No Manifold, Vertical Line, Hastelloy-C
HVMH0 Integral, 3-Valve Manifold, Vertical Line, Hastelloy-C
Direct and Integral Mount Heads - Vertical Line with RTD
HVTHB Direct Mount, 5-Valve Manifold, TD, B31.1, Vertical Line, Hastelloy-C
HVTHD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, Hastelloy-C
HVTHN Direct Mount, 5-Valve Manifold, RTD, NACE, Vertical Line, Hastelloy-C
HVTH0 Integral, 3-Valve Manifold, RTD, Vertical Line, Hastelloy-C
Remote Mount - Horizontal Line
HA2H0 Axial, Horizontal Line, 1/2—14 NPT, Hastelloy-C
HA2HS Axial, Horizontal Line, 1/2 in. Socket Weld Ports, Hastelloy-C
HP2H0 Parallel, Horizontal Line, 1/2—14 NPT, Hastelloy-C
Remote Mount - Vertical Line
HPVH0 Parallel, Vertical Line, 1/2—14 NPT, Hastelloy-C
HV2H0 Axial, Vertical Line, 1/2—14 NPT, Hastelloy-C

Code Instrument Connections


Eliminate Instrument Connection Options (For use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CP2C0 Needle Valve, Nipple, 1/2—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, 1/2—14 NPT, CS
Needle Valves - SST
CP2S0 Needle Valve, Nipple, 1/2—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, 1/2—14 NPT, SST
Needle Valves - Hastelloy-C
CP2H0 Needle Valve, Nipple, 1/2—14 NPT, Hastelloy-C
Gate Valves - CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, 1/2—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, CS

Flow-500
Rosemount Inc.

MODEL DHF+45H
Code Instrument Connections (Continued)
Gate Valves - SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, 1/2—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, 1/2—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, 1/2—14 NPT, SST

Code Packing Glands

GVDHC Graphite, 3 in. ANSI Class 600, Hastelloy-C


GVDHB Graphite, 3 in. ANSI Class 300, Hastelloy-C
GVDHA Graphite, 3 in. ANSI Class 150, Hastelloy-C

Code Insert/Retract
IHRS Manual, Dual, SST Rods
IHRC Manual, Dual, CS Rods
IHDS Gear, Dual, SST Rods
IHDC Gear, Dual, CS Rods

Code Isolation Valve

Gate Valve - CS
VCDCG Gate Valve, 3 in. ANSI Class 600, CS
VBDCG Gate Valve, 3 in. ANSI Class 300, CS
VADCG Gate Valve, 3 in. ANSI Class 150, CS
Gate Valve - SST
VCDSG Gate Valve, 3 in. ANSI Class 600, SST
VBDSG Gate Valve, 3 in. ANSI Class 300, SST
VADSG Gate Valve, 3 in. ANSI Class 150, SST

Diamond II+ Annubar®


Ball Valve - CS
VBDCB Ball Valve, 3 in. ANSI Class 300, CS
VADCB Ball Valve, 3 in. ANSI Class 150, CS
Ball Valve - SST
VBDSB Ball Valve, 3 in. ANSI Class 300, SST
VADSB Ball Valve, 3 in. ANSI Class 150, SST

Code Flanged Mount

FADC 3 in. ANSI Class 150, Weld-Neck RF, CS


FADS 3 in. ANSI Class 150, Weld-Neck RF, SST
FBDC 3 in. ANSI Class 300, Weld-Neck RF, CS
FBDS 3 in. ANSI Class 300, Weld-Neck RF, SST
FCDC 3 in. ANSI Class 600, Weld-Neck RF, CS
FCDS 3 in. ANSI Class 600, Weld-Neck RF, SST

Code Optional Temperature Sensors (For use with Remote Mount Head Styles)
TRA Integral RTD, Axial Head
TRP Integral RTD, Parallel Head
TXA Integral RTD, FM Explosion-Proof, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly


S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 to 16 in.)
S Lab Flow Calibration (Average K) (18 to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Flow-501
Diamond II+ Annubar®

MODEL DHF+45H
Code Optional Quality Assurance
QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DHF+45H 240 HAMH0 C0000 GVDHA IHDS VADSG FADC
Diamond II+ Annubar®

Flow-502
Rosemount Inc.

Model DHF+45M
Model Product Description
DHF+45M Diamond II + Annubar® Primary Flow Element - Flanged Flo-Tap

Code Line Size


100 10 in. (250 mm)
120 12 in. (300 mm)
140 14 in. (350 mm)
160 16 in. (400 mm)
180 18 in. (450 mm)
200 20 in. (500 mm)
240 24 in. (600 mm)
300 30 in. (750 mm)
360 36 in. (900 mm)
420 42 in. (1066 mm)
480 48 in. (1210 mm)
600 60 in. (1520 mm)
720 72 in. (1820 mm)

Code Head Style


Direct and Integral Mounted Heads - Horizontal Line
HADM0 Direct Mount, with 5-Valve Manifold, Horizontal Line, Monel
HADMB Direct Mount, with 5-Valve Manifold, B31.1, Horizontal Line, Monel
HADMN Direct Mount, with 5-Valve Manifold, NACE, Horizontal Line, Monel
HAPM0 Direct Mount, No Manifold, Horizontal Line, Monel
HAMM0 Integral, 3-Valve Manifold, Horizontal Line, Monel
Direct and Integral Mounted Heads - Horizontal Line with RTD
HATMD Direct Mount, with 5-Valve Manifold, RTD, Horizontal Line, Monel
HATMN Direct Mount, 5-Valve Manifold, RTD, NACE, Horizontal Line, Monel
HATMB Direct Mount, 5-Valve Manifold, RTD, B31.1, Horizontal Line, Monel
HATM0 Integral, 3-Valve Manifold, RTD, Horizontal Line, Monel

Diamond II+ Annubar®


Direct and Integral Mounted Heads - Vertical Line
HVDM0 Direct Mount, with 5-Valve Manifold, Vertical Line, Monel
HVDMB Direct Mount, 5-Valve Manifold, B31.1, Vertical Line, Monel
HVDMN Direct Mount, 5-Valve Manifold, NACE, Vertical Line, Monel
HVPM0 Direct Mount, No Manifold, Vertical Line, Monel
HVTM0 Integral, 3-Valve Manifold, RTD, Vertical Line, Monel
Direct and Integral Mounted Heads - Vertical Line with RTD
HVTMB Direct Mount, 5-Valve Manifold, TD, B31.1, Vertical Line, Monel
HVTMD Direct Mount, with 5-Valve Manifold, RTD, Vertical Line, Monel
HVTMN Direct Mount, 5-Valve Manifold, RTD, NACE, Vertical Line, Monel
HVMM0 Integral, 3-Valve Manifold, RTD, Vertical Line, Monel
Remote Mount - Horizontal Line
HA2M0 Axial, Horizontal Line, ½—14 NPT, Monel
HA2MS Axial, Horizontal Line, ½ in. Socket Weld Ports, Monel
HP2M0 Parallel, Horizontal Line, ½—14 NPT, Monel
Remote Mount - Vertical Line
HPVM0 Parallel, Vertical Line, ½—14 NPT, Monel
HV2M0 Axial, Vertical Line, ½—14 NPT, Monel
HV2MS Axial, Vertical Line, ½ in. Socket Weld Ports, Monel

Code Instrument Connections


Eliminate Instrument Connection Assembly (For Use with Direct and Integral Mount Head Styles)
C0000 Eliminate Instrument Connection Assembly
S0000 Eliminate Instrument Connection Assembly (Steam)
Needle Valves - CS
CP2C0 Needle Valve, Nipple, ½—14 NPT, CS
SP2C0 Needle Valve, Nipple and Tee, ½—14 NPT, CS
Needle Valve - SST
CP2S0 Needle Valve, Nipple, ½—14 NPT, SST
SP2S0 Needle Valve, Nipple and Tee, ½—14 NPT, SST
Needle Valve - Monel
CP2M0 Needle Valve, Nipple, ½—14 NPT, Monel
Gate Valve - CS
CC2C0 Outside Stem and Yoke Gate Valve, Nipple, ½—14 NPT, CS
SC2C0 Outside Stem and Yoke Gate Valve, Nipple and Tee, ½—14 NPT, CS
SV2C0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½—14 NPT, CS
Gate Valve - SST
CC2S0 Outside Stem and Yoke Gate Valve, Nipple, ½—14 NPT, SST
SC2S0 Outside Stem and Yoke Gate Valve, Nipple and Tee, Steam, ½—14 NPT, SST
SV2S0 Outside Stem and Yoke Gate Valve, Vertical Line, Nipple and Tee, ½—14 NPT, SST

Flow-503
Diamond II+ Annubar®

Model DHF+45M
Code Packing Glands
GVDMC Graphite, 3 in. ANSI Class 600, Monel
GVDMB Graphite, 3 in. ANSI Class 300, Monel
GVDMA Graphite, 3 in. ANSI Class 150, Monel

Code Insert/Retract

IHRS Manual, Dual, SST Rods


IHRC Manual, Dual, CS Rods
IHDS Gear, Dual, SST Rods
IHDC Gear, Dual, CS Rods

Code Isolation Valve

Gate Valve - CS
VCDCG Gate Valve, 3 in. ANSI Class 600, CS
VBDCG Gate Valve, 3 in. ANSI Class 300, CS
VADCG Gate Valve, 3 in. ANSI Class 150, CS
Gate Valve - SST
VCDSG Gate Valve, 3 in. ANSI Class 600, SST
VBDSG Gate Valve, 3 in. ANSI Class 300, SST
VADSG Gate Valve, 3 in. ANSI Class 150, SST
Ball Valve - CS
VBDCB Ball Valve, 3 in. ANSI Class 300, CS
VADCB Ball Valve, 3 in. ANSI Class 150, CS
Ball Valve - SST
VBDSB Ball Valve, 3 in. ANSI Class 300, SST
VADSB Ball Valve, 3 in. ANSI Class 150, SST

Code Flanged Mount


Diamond II+ Annubar®

FADC 3 in. ANSI Class 150, Weld-Neck RF, CS


FADS 3 in. ANSI Class 150, Weld-Neck RF, SST
FBDC 3 in. ANSI Class 300, Weld-Neck RF, CS
FBDS 3 in. ANSI Class 300, Weld-Neck RF, SST
FCDC 3 in. ANSI Class 600, Weld-Neck RF, CS
FCDS 3 in. ANSI Class 600, Weld-Neck RF, SST

Code Optional Temperature Sensors (For Use with Remote Mount Head Styles)

TRA Integral RTD, Axial Head


TRP Integral RTD, Parallel Head
TXA Integral RTD, FM Explosion-Proof, Axial
TXP Integral RTD, FM Explosion-Proof, Parallel
TRR Remote Thermowell and RTD
TXR Remote Thermowell and RTD, FM Explosion-Proof

Code Optional Special Assembly


S4 Factory Assembly of DP Transmitter to DP primary

Code Optional Calibration


M Lab Flow Calibration (Average K) (<10 in.)
Z Special Calibration
O Lab Flow Calibration (Average K) (12 in.)
Q Lab Flow Calibration (Average K) (14 in. to 16 in.)
S Lab Flow Calibration (Average K) (18 in. to 20 in.)
U Lab Flow Calibration (Average K) (24 in.)
W Lab Flow Calibration (Average K) (30 in.)
Y Lab Flow Calibration (Average K) (36 in.)

Code Optional Quality Assurance


QA1 Dieterich Program
Q21 ANSI B31.1
Q23 ANSI B31.3
Q29 NACE MR-0175-91
QJ2 Special Product Drawing
QM2 ASTM Material-Traceable (Sensor Only)
QT1 Hydrostatic Test EP-4017
QT2 Dye Penetrant ES-1012
QT8 Extended Hydro EP-4046

Typical Model Number DHF+45M 240 HAMM0 C0000 GVDMA IHDS VADSG FADC

Flow-504
Rosemount Inc.

Diamond II+ Annubar®

Flow-505
Diamond II+ Annubar®
Diamond II+ Annubar®

Flow-506
Rosemount Inc.

Diamond II+ Annubar®

Flow-507
Diamond II+ Annubar®
Diamond II+ Annubar®

Flow-508
Rosemount Inc.

Specifications
FUNCTIONAL SPECIFICATIONS PERFORMANCE SPECIFICATIONS

Service Accuracy
Liquid, gas, and steam applications. ±1% of flow coefficient.

Pipe Sizes When used in closed loop–control applications,


higher damping values are recommended.
½ in. to 72 in. (12 mm to 1820 mm).
Repeatability
Flow Sensor Sizes (SST)
±0.1%.

Sensor # For Line Sizes


10 ½ in. to 2 in. (12.5 mm to 50 mm) Model Minimum Reynold’s Number (Rerod)

15/16 2 in. to 5 in. (50 mm to 125 mm) 10 2300


25/26 4 in. to 42in. (100 mm to 1066 mm) ½ in. lines 4000
35/36 8 in. to 72 in. (200 mm to 1820 mm) 15/16 6500
45/46 10 in. to 72 in. (250 mm to 1820 mm) 25/26 10000
35/36 15000
TABLE 3. Flow Sensor Sizes (SST).
45/46 25000

Diamond II+ Annubar®


Flow Sensor Sizes Where: ρ = fluid density in lbm/ft3
Rerod = dVρ d = probe width in feet
(Hastelloy-C and Monel) V = velocity of fluid in ft/sec
µ
µ = fluid viscosity in lbm/ft–sec

Sensor # For Line Sizes TABLE 5. Model Minimum Reynold’s Numbers.


10 ½ in. to 2 in. (12.5 mm to 50 mm)
See the Annubar Primary Flow Element Handbook
25/26 4 in. to 42 in. (100 mm to 1066 mm)
for detailed information (page Flow-375).
45/46 10 in. to 72 in. (250 mm to 1820 mm)
May be protected by one or more of the following U.S. Patent Nos.4,559,836; 4,717,159;
TABLE 4. Flow Sensor Sizes (Hastelloy—C and Monel). 5,710,370; 5,773,726; 4,633, 713; and various foreign patents. Other foreign patents issued
and pending.
Rosemount, the Rosemount logotype, PlantWeb, Fisher-Rosemount, and Managing the
Operating Process Temperature Limits Process Better are marks of one of the Fisher-Rosemount group of companies. Coplanar,
MV, and Multivariable are trademarks of Rosemount Inc.

Integral head style: -40 °F to 500 °F (-40 °C to 454 °C). Mass ProBar, ProBar, and Annubar are registered trademarks of Dieterich Standard Inc.
HART is a registered trademark of the HART Communications Foundation.
Monel is a registered trademark of International Nickel Co.
For HATSB, HVTSB, HADSB, and HVDSB Teflon is a registered trademark of E. I. du Pont de Nemours & Co.
head styles and regular flanged, Flo-Tap models: Hastelloy C and Hastelloy C-276 are registered trademarks of Cabot Corp.
-40 °F to 750 °F (-40 °C to 398 °C). Windows is a trademark of Microsoft Corp.
All other marks are the property of their respective owners.

Remote mount (SST and Monel):


-40 °F to 850 °F (-40 °C to 454 °C).

Remote mount (Hastelloy-C):


-40 °F to 900 °F (-40 °C to 482 °C).

Remote mount (Hastelloy-C) with remote


temperature sensor :
-40 °F to 1200 °F (-40 °C to 649 °C).

Pressure Limits
0–1440 psig (100 barg) @ 100 °F (37.8 °C).

Contact the factory for higher pressures.

Flow-509
Diamond II+ Annubar®

PHYSICAL SPECIFICATIONS Flange, Isolation Valves

Sensor 316L SST. Flange pressure limits are per ANSI


B16.5 for 316 SST and material per SA 182. Flange
316/316L SST. face finish ANSI B16.5, 125 to 250 RMS.

Hastelloy—C (flanged models, sensors 10, 25/26, Packing Gland Assembly


and 45/46).
Packing Gland: 316 SST.
Monel (flanged models, sensors 10, 25/26,
and 45/46). Packing: Graphite AFP–127.

Integral Valve and Direct Mounts Head Flange Mounting Hardware


Styles (3 and 5 Valve)
(Includes nuts, bolts, and gasket)
Material 316 SST or CS.

316 SST (Hastelloy—C and Monel options). Temperature Options


O–Rings Integral RTD: 100 Ω Platinum RTD.
Teflon® (Grafoil above 500 °F [260 °C]).
Remote: 100 Ω Platinum RTD, spring loaded with
Bolts
½ in.—14 NPT nipple and union.
316 SST.
Thermowell: ½ in. × ½ in.—14 NPT, 316 SST with
Diamond II+ Annubar®

½ in. CS weld couplet, u = 2½ in.

Dieterich Standard Inc. Rosemount Inc. Fisher-Rosemount Limited Fisher-Rosemount


5601 North 71st Street 8200 Market Boulevard Heath Place Singapore Pte Ltd.
Boulder, CO 80301 Chanhassen, MN 55317 USA Bognor Regis 1 Pandan Crescent
Tel (303) 530-9600 Tel 1-800-999-9307 West Sussex PO22 9SH Singapore 128461
Fax (303) 530-7064 Telex 4310012 England Tel (65) 777-8211
Fax (612) 949-7001 Tel 44 (1243) 863 121 Fax (65) 777-0947
Fax 44 (1243) 867 5541 Tlx RS 61117 FRSPL

© 1998 Rosemount Inc.


http://www.rosemount.com INT
ED
PR

IN
U. S. A.

¢00813-0100-4762+¤
00813-0100-4760 Rev. DA 11/98

Flow-510

Potrebbero piacerti anche