Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
3.8936567164
5.1641791045
AS TS NIT
GOVERNMENT OF
ANDHRA PRADESH
AMOUNT OF ESTIMATE
Rs. 100.00Lakhs.
(R&B) Circle ::
&B) Division ::
AS TS NIT
GOVERNMENT OF
ANDHRA PRADESH
AMOUNT OF ESTIMATE
Rs. 100.00Lakhs.
Sl
DESCRIPTION AMOUNT Rs
No
PART - A
1 Road work 17291045
Total Rs 19999999
DETAILED ESTIMATE
MEASUREMENTS
Sno Description Quantity Rate Per Amount
No LENT BRDT DPT
1 2 3 4 5 6 7 8 9 10
3 Scarifying
say 0.00 sm 7.80 1.00 0
3 GSB Gr V
say 0.00 sm 2,123.00 1.00 0
3 WMM for approach slabs
say 0.00 sm 2,331.00 1.00 0
3 Providing and applying Prime Coat with bitumen emulsion (SS-1)
say 0.00 sm 48.20 1.00 0
4 Providing and applying tack coat Bitumen VG 10 at 0.25 kgs/ 1sqm
say 0.00 sm 12.80 1.00 0
4 Providing and applying tack coat Bitumen VG 10 at 0.20 kgs/ 1sqm
say 52800.00 sm 10.70 1.00 564960
Providing and laying of 50mm thick Bituminous Macadam with
0
CC Pavement
9 Removal of Unserviceable soils
### say cum 104.80 1.00 0
9 GSB Gr. V
### say cum 2,123.00 1.00 0
9 Sand filling
### say cum 418.00 1.00 0
9 Dry lean Mix
### say 0.00 cum 2,758.00 1.00 0
9 CC M35
### say 0.00 cum 5,354.00 1.00 0
9 Separation Membrane
### say cum - 1.00 0
9 HYSD Tie bars
### say 0.00 Sqm 43,486.00 1.00 0
9 Mild Steel
### say 0.00 MT 43,432.00 1.00 0
9 High Performance 25mm th Expansion joint filler board
### say 0.00 Sqm 1,127.00 1.00 0
9 Providing Contraction Joints
### wall say 0.00 Rm 54.00 1.00 0
9 Providing RCC NP 4 300mm dia pipes
### say 0.00 Rm 1,098.00 1.00 0
1 x 2
0 say 0.00 cum 702.00 1.00 0
9 Reflective pavement markers
1 x 1
0 say 0.00 cum 19,252.00 1.00 0
9 Village name board 450X750
1 x 1
0 say 0.00 cum 4,903.00 1.00 0
9 Installation of Hazard Markers/Delainators
1 x 1
0 say 0.00 cum 3,210.00 1.00 0
9 Mandatory Regulatory 600mm equilateral
1 x 1
0 say 0.00 cum 3,400.00 1.00 0
9 Moulded Shanks
TOTAL
Construction of Protective wall from Km 10/0 to 11/660
9 Earth work for foundations
### say 0.00 cum 96.00 1.00 0
9 Sand filling
### say 0.00 cum 418.00 1.00 0
9 CC 1::3:6) foundations
### say 0.00 cum 3,894.00 1.00 0
9 CC M15 for Raft
### say 0.00 cum 4,510.00 1.00 0
9 CC M15 for substructure
### say 0.00 cum 4,771.00 1.00 0
9 HYSD Substructure
### say 0.00 Rm 44,051.00 1.00 0
9 Weep holes
### say 0.00 Rm 70.80 1.00 0
9 Filter media
### say 0.00 Rm 1,730.00 1.00 0
9 Gravel filling behind body walls
### wall say 0.00 cum 851.00 1.00 0
9 Cost and supply of High Performance 25mm thick
### wall say 0.00 cum 1,127.00 1.00 0
17291045
CALCULATIONS
No LENT BRDT DPT
1,575.00
540
1,575.00
540
1,575.00
540
1,575.00
540
700
4600
4739
444.28
445
5000.00
4739
444.28
445
4739
444.28
445
27500
1
Name of Work :- Special Repairs to in Guntur District.
0
0
Asst. Executive Engineer Dy. Executive Engineer Executive Engineer (R&B)
R&B Section, ___ ___ ___ R&B Sub-Division___ (R&B)Division, ___ ____ ___
Name of Work:- Special Repairs to in Guntur District.
RMR.
Date :: 8-Aug-18 SSR :: 2017-18
Machine Crushing
(-) Stacking Charges
Conveyance rate (-)
Municipal Area
unloading charges
Stacking Charges
Blasting Charges
Allowance
Average Lead
Initial Rate
Conveyance
Charges
Seigniorage
Loading &
of Material
Charging
Weighted
Charges
Stacking
TOTAL RATE
rate
S.No Nature of Metal
2 Sand for Mortar 7.00 98.93 0.00 68.70 182.00 98.93 182.00 -- -- 0.00 0.0 0.00 280.93
3 Sand for Concrete 7.00 98.93 0.00 68.70 100.00 98.93 100.00 -- -- 0.00 0.0 0.00 198.93
4 Sand for Filling 7.00 98.93 0.00 68.70 100.00 98.93 100.00 -- -- 0.00 0.0 0.00 198.93
4 Sand for Filling 7.00 98.93 0.00 68.70 100.00 98.93 100.00 -- -- 0.00 0.0 0.00 198.93
5 Cement 3882.00 3882.00
6 HYSD Steel 32627.11 32627.11
7 MS Steel 33050.85 33050.85
8 6 mm Mild Steel 33050.85 33050.85
(A) Material
31.50 RM RM 34.00 1.00 1071.00
10.00 no collars for AC pipe 15.00 1.00 150.00
30.00 no MS clamps 5.00 1.00 150.00
0.05 cum Cement mortar (1:3) 2652.84 1.00 132.64
TOTAL A= 1503.64
1503.64
(B) Labour
0.03 no Mate 451.00 1.00 13.53
0.50 no Mason 455.00 1.00 227.50
0.25 no Mazdoor 400.00 1.00 100.00
341.03
0.0 % Municipal Area Allowance 341.03 0.00
TOTAL B= 341.03
(A + B ) 1844.67
Circle, Guntur in the references cited, Administrative approval is hereby accorded for
100.00 Lakhs under Special Repairs Programme for the year 2017-18
10) Remarks : -
1) Certified that the Leads provided in the lead statement are the shortest.
2) Certified that the Distances noted herein are correct.
3) Certified that the quarries are nearest and are having sufficient yield.
4) Certified that the routs shown are nearest.
5) Certified that the description of the variety of materials noted are correct to the
best of my knowledge.
6) Certified that the Land available for the road formation is sufficient and no land
acquisition is required
7) Certified that the Hard Blasted Trap is obtained by Blasting, Hence Blasting
charges are allowed on Trap metal.
8) Certified that the reach in the Estimate is not proposed in any other schemes.
9) Certified that the side earth is not available for formation, hence Barrowed soils
with 1000 m lead is provided in the estimate.
Cement concrete batch mix plant @ 75 cum per hour 1343.00 1269.50
Pre moulded Joint filler, 25 mm thick for expansion joint. 262.00 ( M141)
Joint Sealent 58.00 ( M120)
Super plastisizer admixture IS marked as per 9103-1999 @ 0.5 per cent by weight of cement 43.00 ( Sl 70 WR)
From
data Entry
IRC HBG METAL HMP 52.00
Metal/
SIZES RATE 52.00
Stone Qry
IRC2.36 293.35
IRC5 480.00
MASTIC PADS METAL LEADS & RAT
IRC9 624.75 25.4 mm 839.00 BMS-W.20 2018-19 after GST
IRC12 742.85 12.7 mm 481.00 BMS-W.21 LEAD NOTATION
IRC19 937.15 PAINTS 225.00 BMT-J.29 MLOAD
IRC25 899.05 MUNLOAD
IRC40 560.00 MSTACK
IRC50 434.30
IRC60 399.05 SCRAP from SCARIFYING
IRC65 360.95 2018-19 0.00 0
IRC75 289.50 LEAD NOTATION RATE From SSR 1 MT1
DUST 333.00 MLOAD 43.10 2 MT2
MUNLOAD 21.55 3 MT3
4 MT4
5 MT5
6 MT6
7 MT7
8 MT8
9 MT9
WORKS
10 MT10
11 MT11
12 MT12
13 MT13
WORKS RATE
14 MT14
EWBULK 15 MT15
EW20A 16 MT16
ES20B 17 MT17
18 MT18
19 MT19
20 MT20
21 MT21
22 MT22
23 MT23
24 MT24
25 MT25
26 MT26
27 MT27
4 CLASS PIPES 28 MT28
CEMENT & STEEL 29 MT29
2018-19 30 MT30
BASIC
MATERIAL PRICE
CURRENT 31 MT31
PRICE
First 5 km Next 1 km FOR PIPES 32 MT32
Lead Lead
CEMENT 3882.00 3882.00 33 MT33
112.840 5.24 HYSD 32627.11 34 MT34
150.880 6.08 MS6 41500.00 33050.85 35 MT35
238.360 11.48 MS 33050.85 36 MT36
289.080 12.49 BWIRE 53.00 37 MT37
68.47 2.36 38 MT38
53.26 1.52 39 MT39
49.45 1.36 40 MT40
41 MT41
42 MT42
2007-08 2008-09 2017-18 old 2017-18 GST 43 MT43
44 MT44
2400.00 2760.00 2616.90 2233.20 45 MT45
2260.00 2600.00 3220.00 2748.00 46 MT46
1950.00 2250.00 2888.60 2506.90 47 MT47
1150.00 1320.00 1650.00 1432.00 48 MT48
500.00 575.00 953.70 853.90 49 MT49
1350.00 1550.00 2721.70 2421.50 50 MT50
1150.00 1320.00 1182.00 1137.90 51 MT51
300.00 345.00 630.00 588.50 52 MT52
300.00 345.00 425.00 380.60 53 MT53
320.00 370.00 472.10 447.90 54 MT54
1150.00 1320.00 1650.00 1482.00 55 MT55
250.00 290.00 375.00 336.80 56 MT56
820.00 940.00 1500.00 1347.30 57 MT57
600.00 690.00 860.00 772.50 58 MT58
28200.00 25329.00 59 MT59
24200.00 21736.00 60 MT60
21700.00 19491.00 61 MT61
13500.00 15525.00 19200.00 17245.00 62 MT62
3060.00 2748.50 63 MT63
950.00 1090.00 2250.00 2021.00 64 MT64
470.00 540.00 1182.00 1137.90 65 MT65
1350.00 1320.00 1650.00 1588.50 66 MT66
3190.00 2865.00 67 MT67
900.00 1035.00 1347.00 1296.80 68 MT68
219.00 196.70 69 MT69
800.00 920.00 1257.00 1129.00 70 MT70
1350.00 1550.00 1850.00 1819.30 71 MT71
950.00 1090.00 1320.00 1298.10 72 MT72
800.00 920.00 1126.00 1107.30 73 MT73
3.90 4.50 953.70 853.90 74 MT74
3.90 4.50 953.70 853.90 75 MT75
32.00 40.00 58.00 52.10 76 MT76
1800.00 2070.00 2695.00 2420.70 77 MT77
1268.00 1268.00 1268.00 1268.00 78 MT78
150.00 170.00 219.00 196.70 79 MT79
1268.00 90.00 133.00 119.50 80 MT80
200.00 81 MT81
65.00 82 MT82
300.00 345.00 492.60 471.90 83 MT83
300.00 345.00 415.00 371.60 84 MT84
300.00 345.00 425.00 380.60 85 MT85
88 MT88
89 MT89
90 MT90
91 MT91
92 MT92
93 MT93
94 MT94
95 MT95
96 MT96
97 MT97
98 MT98
99 MT99
100 MT100
101 MT101
102 MT102
103 MT103
104 MT104
105 MT105
106 MT106
107 MT107
108 MT108
109 MT109
110 MT110
111 MT111
112 MT112
113 MT113
114 MT114
115 MT115
116 MT116
117 MT117
118 MT118
119 MT119
120 MT120
121 MT121
122 MT122
123 MT123
124 MT124
125 MT125
126 MT126
127 MT127
128 MT128
129 MT129
130 MT130
131 MT131
132 MT132
133 MT133
134 MT134
135 MT135
136 MT136
137 MT137
138 MT138
139 MT139
140 MT140
141 MT141
142 MT142
143 MT143
144 MT144
145 MT145
146 MT146
147 MT147
148 MT148
149 MT149
150 MT150
151 MT151
152 MT152
153 MT153
154 MT154
155 MT155
156 MT156
157 MT157
158 MT158
159 MT159
160 MT160
161 MT161
162 MT162
163 MT163
164 MT164
165 MT165
166 MT166
167 MT167
168 MT168
169 MT169
170 MT170
171 MT171
172 MT172
173 MT173
174 MT174
175 MT175
176 MT176
177 MT177
178 MT178
179 MT179
180 MT180
181 MT181
182 MT182
183 MT183
184 MT184
185 MT185
186 MT186
187 MT187
188 MT188
189 MT189
190 MT190
191 MT191
192 MT192
193 MT193
194 MT194
195 MT195
196 MT196
197 MT197
198 MT198
199 MT199
200 MT200
201 MT201
202 MT202
203 MT203
204 MT204
205 MT205
206 MT206
207 MT207
208 MT208
209 MT209
210 MT210
211 MT211
212 MT212
213 MT213
214 MT214
215 MT215
216 MT216
217 MT217
218 MT218
219 MT219
220 MT220
221 MT221
222 MT222
223 MT223
224 MT224
225 MT225
226 MT226
227 MT227
228 MT228
229 MT229
230 MT230
231 MT231
232 MT232
233 MT233
234 MT234
235 MT235
236 MT236
237 MT237
238 MT238
239 MT239
240 MT240
241 MT241
242 MT242
243 MT243
244 MT244
245 MT245
246 MT246
247 MT247
248 MT248
249 MT249
250 MT250
251 MT251
252 MT252
253 MT253
254 MT254
255 MT255
256 MT256
257 MT257
258 MT258
259 MT259
260 MT260
261 MT261
262 MT262
263 MT263
264 MT264
265 MT265
266 MT266
267 MT267
268 MT268
269 MT269
270 MT270
271 MT271
272 MT272
273 MT273
274 MT274
275 MT275
276 MT276
277 MT277
278 MT278
279 MT279
280 MT280
281 MT281
282 MT282
283 MT283
284 MT284
285 MT285
286 MT286
287 MT287
288 MT288
289 MT289
290 MT290
291 MT291
292 MT292
293 MT293
294 MT294
295 MT295
296 MT296
297 MT297
298 MT298
299 MT299
300 MT300
301 MT301
302 MT302
303 MT303
304 MT304
305 MT305
306 MT306
307 MT307
308 MT308
309 MT309
310 MT310
311 MT311
312 MT312
313 MT313
314 MT314
315 MT315
316 MT316
317 MT317
318 MT318
319 MT319
320 MT320
321 MT321
322 MT322
323 MT323
324 MT324
325 MT325
326 MT326
327 MT327
328 MT328
329 MT329
330 MT330
331 MT331
332 MT332
333 MT333
334 MT334
335 MT335
336 MT336
337 MT337
338 MT338
339 MT339
340 MT340
341 MT341
342 MT342
343 MT343
344 MT344
345 MT345
346 MT346
347 MT347
348 MT348
349 MT349
350 MT350
351 MT351
352 MT352
353 MT353
354 MT354
355 MT355
356 MT356
357 MT357
358 MT358
359 MT359
360 MT360
361 MT361
362 MT362
363 MT363
364 MT364
365 MT365
366 MT366
367 MT367
368 MT368
369 MT369
370 MT370
371 MT371
372 MT372
373 MT373
374 MT374
375 MT375
376 MT376
377 MT377
378 MT378
379 MT379
380 MT380
381 MT381
382 MT382
383 MT383
384 MT384
385 MT385
386 MT386
387 MT387
388 MT388
389 MT389
390 MT390
391 MT391
392 MT392
393 MT393
394 MT394
395 MT395
396 MT396
397 MT397
398 MT398
399 MT399
400 MT400
401 MT401
402 MT402
403 MT403
404 MT404
405 MT405
406 MT406
407 MT407
408 MT408
409 MT409
410 MT410
411 MT411
412 MT412
413 MT413
414 MT414
415 MT415
416 MT416
417 MT417
418 MT418
419 MT419
420 MT420
421 MT421
422 MT422
423 MT423
424 MT424
425 MT425
426 MT426
427 MT427
428 MT428
429 MT429
430 MT430
431 MT431
432 MT432
433 MT433
434 MT434
435 MT435
436 MT436
437 MT437
438 MT438
439 MT439
440 MT440
441 MT441
442 MT442
443 MT443
444 MT444
445 MT445
446 MT446
447 MT447
448 MT448
449 MT449
450 MT450
451 MT451
452 MT452
453 MT453
454 MT454
455 MT455
456 MT456
457 MT457
458 MT458
459 MT459
460 MT460
461 MT461
462 MT462
463 MT463
464 MT464
465 MT465
466 MT466
467 MT467
468 MT468
469 MT469
470 MT470
471 MT471
472 MT472
473 MT473
474 MT474
475 MT475
476 MT476
477 MT477
478 MT478
479 MT479
480 MT480
481 MT481
482 MT482
483 MT483
484 MT484
485 MT485
486 MT486
487 MT487
488 MT488
489 MT489
490 MT490
491 MT491
492 MT492
493 MT493
494 MT494
495 MT495
496 MT496
497 MT497
498 MT498
499 MT499
500 MT500
From To Data
data Entry Entry
Removal
0.00 0 0.00
Excavated soil
To Data Selected Earth
shoulder 22.00 270.56 307.40
Entry
571.23 649 E/W for formation #N/A #N/A METAL LEADS & RATES
From
571.23 649 Sand for Mortar 7.00 98.93 112.40 LEAD NOTATION RATE
22.4 SSR
Sand for filling 7.00 98.93 112.40 21.789883 MLOAD 12.80 12.80
TAL LEADS & RATES SAND/ EARTH LEADS & RATES MUNLOAD 8.70 8.70
2018-19 after GST 2018-19 after GST MSTACK 8.70 8.70
From From
RATE LEAD NOTATION RATE 0.00 0.00
SSR SSR
104.20 SLOAD 52.30 0.25 110.00
16.40 SUNLOAD 16.40 0.50 MT500 110.00 110.00
SSTACK 1 MT1 120.00 120.00
2 MT2 126.00 126.00
3 MT3 132.00 132.00
0.00 0.00 0 0.00 4 MT4 138.00 138.00
31.50 31.50 1 SD1 32.40 32.40 5 MT5 144.00 144.00
44.10 44.10 2 SD2 45.30 45.30 6 MT6 150.00 150.00
60.50 60.50 3 SD3 60.50 60.50 7 MT7 156.00 156.00
73.40 73.40 4 SD4 73.40 73.40 8 MT8 162.00 162.00
86.40 86.40 5 SD5 86.40 86.40 9 MT9 168.00 168.00
99.40 13.00 6-30 6 SD6 99.40 13.00 6-30 10 MT10 174.00 174.00
112.40 10.80 >30 7 SD7 112.40 10.80 >30 11 MT11 180.00 180.00
125.40 8 SD8 125.40 12 MT12 186.00 186.00
138.40 9 SD9 138.40 13 MT13 192.00 192.00
151.40 10 SD10 151.40 14 MT14 198.00 198.00
164.40 11 SD11 164.40 15 MT15 204.00 204.00
177.40 12 SD12 177.40 16 MT16 210.00 210.00
190.40 13 SD13 190.40 17 MT17 216.00 216.00
203.40 14 SD14 203.40 18 MT18 222.00 222.00
216.40 15 SD15 216.40 19 MT19 228.00 228.00
229.40 16 SD16 229.40 20 MT20 234.00 234.00
242.40 17 SD17 242.40 21 MT21 239.75 5.7500
255.40 18 SD18 255.40 22 MT22 245.50 5.5000
268.40 19 SD19 268.40 23 MT23 251.25 5.0000
281.40 20 SD20 281.40 24 MT24 257.00 4.7500
294.40 21 SD21 294.40 25 MT25 262.75 4.5000
307.40 22 SD22 307.40 26 MT26 268.50
320.40 23 SD23 320.40 27 MT27 274.25
333.40 24 SD24 333.40 28 MT28 280.00
346.40 25 SD25 346.40 29 MT29 285.75
359.40 26 SD26 359.40 30 MT30 291.50
372.40 27 SD27 372.40 31 MT31 297.00
385.40 28 SD28 385.40 32 MT32 302.50
398.40 29 SD29 398.40 33 MT33 308.00
411.40 30 SD30 411.40 34 MT34 313.50
422.20 31 SD31 422.20 35 MT35 319.00
433.00 32 SD32 433.00 36 MT36 324.50
443.80 33 SD33 443.80 37 MT37 330.00
454.60 34 SD34 454.60 38 MT38 335.50
465.40 35 SD35 465.40 39 MT39 341.00
476.20 36 SD36 476.20 40 MT40 346.50
487.00 37 SD37 487.00 41 MT41 352.00
497.80 38 SD38 497.80 42 MT42 357.50
508.60 39 SD39 508.60 43 MT43 363.00
519.40 40 SD40 519.40 44 MT44 368.50
530.20 41 SD41 530.20 45 MT45 374.00
541.00 42 SD42 541.00 46 MT46 379.50
551.80 43 SD43 551.80 47 MT47 385.00
562.60 44 SD44 562.60 48 MT48 390.50
573.40 45 SD45 573.40 49 MT49 396.00
584.20 46 SD46 584.20 50 MT50 401.50
595.00 47 SD47 595.00 51 MT51 406.50
605.80 48 SD48 605.80 52 MT52 411.50
616.60 49 SD49 616.60 53 MT53 416.50
627.40 50 SD50 627.40 54 MT54 421.50
638.20 51 SD51 638.20 55 MT55 426.50
649.00 52 SD52 649.00 56 MT56 431.50
659.80 53 SD53 659.80 57 MT57 436.50
670.60 54 SD54 670.60 58 MT58 441.50
681.40 55 SD55 681.40 59 MT59 446.50
692.20 56 SD56 692.20 60 MT60 451.50
703.00 57 SD57 703.00 61 MT61 456.50
713.80 58 SD58 713.80 62 MT62 461.50
724.60 59 SD59 724.60 63 MT63 466.50
735.40 60 SD60 735.40 64 MT64 471.50
746.20 61 SD61 746.20 65 MT65 476.50
757.00 62 SD62 757.00 66 MT66 481.50
767.80 63 SD63 767.80 67 MT67 486.50
778.60 64 SD64 778.60 68 MT68 491.50
789.40 65 SD65 789.40 69 MT69 496.50
800.20 66 SD66 800.20 70 MT70 501.50
811.00 67 SD67 811.00 71 MT71 506.50
821.80 68 SD68 821.80 72 MT72 511.50
832.60 69 SD69 832.60 73 MT73 516.50
843.40 70 SD70 843.40 74 MT74 521.50
854.20 71 SD71 854.20 75 MT75 526.50
865.00 72 SD72 865.00 76 MT76 531.50
875.80 73 SD73 875.80 77 MT77 536.50
886.60 74 SD74 886.60 78 MT78 541.50
897.40 75 SD75 897.40 79 MT79 546.50
908.20 76 SD76 908.20 80 MT80 551.50
919.00 77 SD77 919.00 81 MT81 556.25
929.80 78 SD78 929.80 82 MT82 561.00
940.60 79 SD79 940.60 83 MT83 565.75
951.40 80 SD80 951.40 84 MT84 570.50
962.20 81 SD81 962.20 85 MT85 575.25
973.00 82 SD82 973.00 86 MT86 580.00
983.80 83 SD83 983.80 87 MT87 584.75
994.60 84 SD84 994.60 88 MT88 589.50
1005.40 85 SD85 1005.40 89 MT89 594.25
2008-09
From
LEAD NOTATION RATE
SSR
SLOAD 10.00 10.00
SUNLOAD 8.50 8.50
SSTACK 5.50 5.50
0 0.00
89 SD89 537.60
90 SD90 542.00
91 SD91 546.40
92 SD92 550.80
93 SD93 555.20
94 SD94 559.60
95 SD95 564.00
96 SD96 568.40
97 SD97 572.80
98 SD98 577.20
99 SD99 581.60
Providing & fixing village name sign board of 900mmX 450mm Rectangularr (TypeIV)
7
Providing and fixing Village name board size 900x450 mm made out of Type – IV of ASTMD 4956-09
High Intensity Prismatic Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full
background of Green Colour & White Letters and fixed over 3MM Alluminium Composite Material
sheet having minimum 0.30 mm thick Aluminium skin on both sides with back side painted grey colour
and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm
and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the
ground level to the bottom of the board. The signpost should be painted with one coat of red oxide
paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The
signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete
foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment,
machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of
the work as directed by Engineer -in-Charge.
Providing & fixing village name sign board of 1200mmX 450mm Rectangularr (TypeIV)
8
Providing & fixing Village Name boards of size 1200 x 450 mm made out of Type – IV of ASTMD
4956-09 High Intensity Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full
background of Green Colour & White Letters and fixed over 4MM Aluminium Composite Material
sheet having minimum 0.4 mm thick Aluminium skin on both sides with back side painted grey colour
and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm
and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the
ground level the bottom of the board. The signpost should be painted with one coat of red oxide paint
and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The
signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete
foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment,
machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of
the work as directed by Engineer -in-Charge.
Type XI Sheeting
Providing and fixing Caution/Warning sign of 600mm Triangular ( Type XI)
Providing and fixing Mandatory / Regulatory sign boards size 600 mm equilateral Triangle made out of
Type –XI of ASTMD D4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting
and confirming to IRC 67:2012 for full background of White colour and letters/logos done by screen
printing in Black colour, boarders by screen printing in Red colour and fixed over 3MM Alluminium
Composite Material ( ACM ) sheet having minimum 0.30 mm thick Aluminium skin on both sides
with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all
round and fixing with 35x35x4mm and and mounted on a MS angle post of size 75x75x6mm with clear
height of not less than 2.1 m from the ground level the bottom of the board. The signpost should be
painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour
with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in
to the ground by M15 Concrete foundation of size 450x450x600mm including cost and conveyance of
all materials ,equipment, machinery and labour with all leads and lift, loading changes necessary for
satisfactory completion of the work as directed by Engineer -in-Charge.
Providing & fixing Mandatory / Regulatory sign of 600mm Circular (Type XI)
Providing and fixing Mandatory / Regulatory sign boards size 600 mm circle made out of Type – XI of
ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming
to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black
colour, boarders by screen printing in Red colour and fixed over 3MM Alluminium Composite Material
sheet having minimum 0.30mm thick Aluminium skin on both sides with back side painted grey colour
and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm
and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the
ground level to the bottom of the board. The signpost should be painted with one coat of red oxide
paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The
signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete
foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment,
machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of
the work as directed by Engineer -in-Charge.
Providing & fixing Mandatory / Regulatory sign of 900mm Circular (Type XI)
Providing and fixing Mandatory / Regulatory sign boards size 900 mm circle made out of Type – XI of
ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming
to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black
colour, boarders by screen printing in Red colour and fixed over 4MM Aluminium Composite Material
sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour
and fixed over back support frame of M.S angle 25x25x3mm all roundand fixing with 35x35x4mm and
mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the
ground levelto the bottom of the board. The signpost should be painted with one coat of red oxide
paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The
signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete
foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment,
machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of
the work as directed by Engineer -in-Charge.
Providing & fixing Hazard Marker of 300X900mm Reflectorized panel (Type XI)
Supplying and installation of Hazard Markers/Delinators using M.S. angle of size 55x55x6mm and
120cm high above ground level painted with two coats of black & white stripes of 15cm wide with first
quality synthetic enamel paint over one coat of appropriate primer of approved brand,colour, with 30cm
x 90cm Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective
sheeting of Yellow colour and confirming to IRC 67:2012 fixed over 3MM Alluminium Composite
Material having minimum 0.30 mm thick Aluminium skin on both sides with standard supports
consisting of alternately black and Yellow with black stripes in screen printing sloping downward at an
angle of 45 degrees towards the side of the obstruction on which the traffic is to pass and buried into
the ground in a trench of size 30cm x 30cm and 50cm depth filled with CC M-20 including cost and
conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading and un-
loading charges necessary for successfull completion of the work on any road in division as directed by
Engineer-in-Charge and conforming to IRC 67-2012 &MORT&H specification No.805 and approved
drawings etc., complete for finished item of work.
This flexible prismatic sheeting shall be of 1ft width and laminated at the back with a 50
micron thick Aluminum (AFP)
This flexible prismatic sheeting shall be of 1ft width and laminated at the back with a 50 micron thick
Aluminum (Al) foil with pressure sensitive adhesive and liner. Further, this flexible prismatic sheeting
shall have screen printed arrow/slant line pattern in black color on top in a continuous roll format.
Neither AFP sheeting nor the flexible prismatic sheeting used in it shall crack when slowly bent in 1
second time around a 1/8th inch mandrel after being conditioned for 24hrs at 0°C and tested as per
section S2.2.2. of ASTM D 4956-09. The AFP sheeting, with the liner removed, shall be applied with a
neoprene contact adhesive with Polychloroprene as base, viscosity of 200-450 cps and solid content of
20-30%. Once applied, the edges of the product shall be sealed all around with a two-part epoxy based
structural adhesive and shall be extremely resistant to peel-off. A test report from institutes like
ARAI/CRRI confirming to above mentioned flexibility and ASTM-D4956-09 Type-VI retro reflectivity
performance of the flexible prismatic sheeting used in AFP shall be submitted by the tenderer during
prequalification and supply of material.