Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
SOLUTIONS
www.fipnet.com
CONTENTS
VALVES AND FITTINGS MANUFACTURER SINCE 1954 01
CONVEYANCE OF WATER 12
CHEMICAL DOSING 13
SAND FILTRATION 14
MEMBRANE FILTRATION 15
CASE HISTORY
– SPA FACILITY - Italy 22
– OLYMPIC SWIMMING FACILITIES - Brazil 23
ALIAXIS WORLDWIDE 24
The information in this leaflet is provided in good faith. No liability will be accepted concerning technical data that is not directly covered by recognised
international standards. FIP reserves the right to carry out any modification. Products must be installed and maintained by qualified personnel.
VALVES AND FITTINGS
MANUFACTURER SINCE 1954
SOLUTIONS
FIP is a reliable supplier for the most conventional pressure
pipeline systems such as water distribution systems, civil and
industrial water treatment, irrigation, gardening, field and
greenhouse farming, sports facilities, swimming pools, aqua
parks, SPA and everywhere is required ease of installation,
minimum maintenance and long life.
VERSATILITY
Global market challenge is to provide versatile products to
be turned into reliable solutions, simple to install and use but
effective to the needs of each application.
FIP develop products able to adapt to different conditions
of use, featuring design, innovation, functionality, reliability
and safety.
EVERYWHERE
We are constantly investing in R&D and process technologies
to improve the products offer as well as the production
efficiency; indeed FIP products, available in PVC-U, PP-H,
PVC-C, PVDF are able to adapt to different conditions of
use always providing additional smart features such as the
customization system to clearly identify each valve of the plant!
KNOW-HOW RESPONSIBILITY
FIP products are manufactured in EU production sites,
Since 1954 FIP produces
operating in compliance to the Quality Assurance System
injection molded valves and ISO 9001 and with the Environmental Management
fittings in thermoplastic System ISO 14001 standards requirements. We believe that
materials for pressure environmental sustainability must be an important component
pipeline systems thus of business practices at all stages of the product life cycle;
becoming nowadays a since its foundation FIP takes care of people health and safety
leading European valves and it is committed to a sustainable use of natural resources
manufacturer. and environment respect.
1
SWIMMING POOL AND SPA
SOLUTIONS
Swimming pool and water park industry is a dynamic and growing market thanks
to the evolution of process technologies, building techniques and no limit to
imagination in design as well as the introduction of new European regulations
concerning quality standards and technological equipment.
SPA centers are, on the other hand, a distinctive element for prestigious hotels,
thermae and resorts willing to provide unique wellness services.
Since its foundation in 1954, FIP is providing solutions for worldwide
customers in swimming pool, water park and SPA industry.
2
SWIM AND WELLNESS
EVERYWHERE
3
CHEMICAL
DOSING
Balance
tank
Pump
SAND
FILTRATION
CONVEYANCE
OF WATER
4
DISINFECTION
AND PH ADJUSTMENT
Heat
Exchanger
VERSATILITY
5
Balance
tank
Pump
6
CONVEYANCE
OF WATER
Salt
chlorination
Heat
Exchanger
MEMBRANE
FILTRATION
RESPONSIBILITY
7
DISINFECTION
AND PH ADJUSTMENT
Pump
SAND
FILTRATION
Heat
Exchanger
AQUA PARK
WATER TREATMENT
Nowadays aqua parks have become more demanding concerning design flexibility
and usage of corrosion free materials, water valves and filter systems.
Increasing environment sensibility requires efficient recovery systems and recycled
water as well as geothermal and solar heaters.
Safe clean water in a well-protected environment for children and adults of all ages
are hallmarks of water parks’ advertising and track records.
8
CONVEYANCE
OF WATER
CHEMICAL
DOSING
Balance
tank
KNOW-HOW
9
Balance
Pump
tank
SAND
FILTRATION
Ultraviolet
Disinfection (UV)
10
CONVEYANCE
OF WATER
DISINFECTION
AND PH ADJUSTMENT
Heat
Exchanger
SOLUTIONS
11
CONVEYANCE OF WATER
A safe and efficient conveyance of water involved in every swimming pool and SPA facilities is also necessary for
avoiding chemical corrosion problems and for maintaining low O&M costs.
PVC-U and PVC-C resins guarantee excellent chemical resistance, optimal thermal stability and an extremely
extended lifetime. PVC-U and PVC-C systems offer pipes and fittings for solvent welding to convey swimming pool
and SPA water under pressure at a maximum operating temperature of 100 °C. The range includes a complete
choice of ball valves, butterfly valves and check valves.
FK
Butterfly valve - large bore VEE
Main features Easyfit 2-way ball valve
n New largest dimensions: Main features
DN350-400 n Innovative quick release
n Nominal pressure up to PN 7
with water at 20 °C
Pipe and Easyfit handle used as a ball
seat adjustment tool
n Body PP-GR resistant to UV Fitting n Settings for the
rays and characterised by high PVC-U and customisable Labelling
mechanical strength System using the LCE
PVC-C
n Interchangeable liner in EPDM module
or FPM with the dual function Main features n Stem with high surface
of hydraulic seal and isolating n Pipes and fittings are designed for
finish, double o-ring and
the body from the fluid conveying fluids under pressure with PTFE anti-friction disk
n Disk available in different a cold chemical weld jointing system tem extension on request
thermoplastic materials (solvent welding) n Valve body set for SHE kit
(PVC-U, PP-H and PVDF) n All products follow the highest
installation that blocks the
n Stainless steel AISI 316 quality standards: ISO9001 for the handle closing and opening
square section stem completely Quality Assurance System and
isolated from the fluid ISO14001 for the Environmental
complying with ISO 5211 Management System.
n Drilling pattern according to n Construction criteria and test
DIN or ANSI standards methods and requirements according
to EN ISO 15493
Pipes - up to d600 - - - n* n n n*
* Traded
12
CHEMICAL DOSING
The chemical dosing is a crucial part of swimming pool and aqua park processes because the suspended particles are
different in size, composition, charge and density.
The addition of coagulants and flocculants is an essential method used before the filtration process and it is necessary to
destabilize and agglomerate colloidal matters. In most of these cases, the chemicals used are corrosive and dangerous.
For this reason, it is required high chemical resistance and extended lifetime of the system.
ORP 200/222
Epoxy body bulb
electrode
Main features
n Epoxy body
n Single or double junction
DK technology
n Large gel reference volume
DIALOCK® 2-way n Easy and quick installation
diaphragm valve system
Main features n Outline cable or BNC
n New body design for connection
higher flow coefficient n Low cost fittings
n Ergonomic hand wheel n Special version on request
and bonnet in PP-GR with
PVC cap for an excellent
chemical resistance
n Dialock® system: VKD/CE
innovative handwheel with Electrically actuated DUAL BLOCK®
a patented locking device
2-way ball valve
that allows it to be adjusted
and locked in over 300 Main features
positions. n Electric actuator selected by FIP according to its
n DKL version with integrated requirements of quality and reliability
Stroke limiter and Travel stop n ON/OFF or modulating functions.
n Customisation plate and n Thermoplastic case to prevent corrosion: IP66
TAG ready protection class
n Manual override as standard and availability of a wide
range of accessories
n DUAL BLOCK® patented union nut locking system
n Floating full bore ball with high surface finish
n Integrated bracket for valve anchoring
13
SAND FILTRATION
Sand filtration is the heart of the process and it is used for achieving an accurate removal of suspended solids and
pathogens. This kind of filtration system is the most common and simple to use with low maintenance and long
lifetime. Furthermore, the sand, as filter medium, is easy to find in the market and the filtration quality can improve
thanks to coagulation and flocculation processes.
Sand filtration system is equipped with automated backwashing and rinsing in order to keep a high level of
efficiency.
FE FK/CP
Butterfly valve Pneumatically actuated
Main features butterfly valve
n Ergonomic multifunctional Main features
handle in HIPVC with the n Pneumatic actuator
option for quick operation and HF6 and M9.10 selected by FIP according to
graduated adjustment in 12 Level/pressure its requirements of quality
positions transmitter and and reliability.
n Customisable labelling system monitor n Normally Closed, Normally
n Drilling pattern with oval Open or Double action
slots that allow coupling to Main features Functions.
flanges according to numerous n Level/Pressure/Depth measurement n Valve body in PP-GR
international standards provided by the same transmitter resistant to UV rays
n Interchangeable liner with n Level measurement not affected by completely isolated from the
the dual function of forming a foam or vapour fluid
hydraulic seal and isolating the n Semi flush ceramic diaphragm for a n Valve disc in PVCU, PVCC,
body from the fluid long-lasting operating time PPH or PVDF
n Stem in stainless steel n Options for gauge pressure and for n Stainless steel stem
AISI 316 absolute pressure completely isolated from the
n Monitor able to manage analog and fluid
frequency signals (or two analog signals) n Availability of a wide range
with wide graphic display and multicolor of accessories
backlight
14
MEMBRANE FILTRATION
Membrane filtration is another common kind of pool filter for the removal of particulates and natural organic
material. Particularly, microfiltration (MF) through cartridge filter is the most used membrane filtration in the
swimming pool & SPA industry, removing material up to approximately 5 microns. MF filters finer particles and
requires less water flow and less energy than a sand filter. On the other side, the cartridge filter uses a paper filter
medium which simply does not last as long as sand media and requires replacement every 3-5 years.
VXE SSE
Easyfit 2-way ball valve Easyfit true union spring
Main features check valve
n Easyfit ergonomic
Main features
multifunctional handle with
n Ideal for horizontal
union nut tightening control
installation: perfect seal even
n Customisable Labelling
with low back pressure
System on the handle to
identify the valve on the F6.60 n Optimised dynamic fluid
design: energy savings
system according to specific Magmeter flow sensor thanks to the improved valve
needs Main features Kv value with consequent
n PTFE ball seat system with
n Accurate measurement of dirty pressure drop reduction
locked carrier and valve liquids n Customisable labelling
stem with double O-Ring n Pipe size range: from DN15 (0,5”) system
n High surface finish valve
to DN600 (24”) n PVC-U shutter and springs
stem with double o-ring, n Low pressure drop available made of stainless
produced in CNC work n 4-20 mA, frequency or volumetric steel 316, hastelloy C276,
stations pulse output settable by friendly A316 PTFE encapsulated
SW through USB connection
n Bi-directional flow measurement
selectable
n Special versions on request
15
DISINFECTION AND PH ADJUSTMENT
The disinfection has the aim to destroy pathogens harmful to the health of the bather, to keep the water clear,
disinfected and without unpleasant odors. Today the most common system for water disinfection is chlorine since
it oxidizes both the organic and the metal substances in the water and disinfects it from bacteria and virus. On the
other hand, the pH control and adjustment is very important for the swimmer comfort and for the protection of
the pool system and its components.
PH 200/222
Epoxy body bulb electrode
Main features
n Single or double junction
VKR technology
DUAL BLOCK® regulating n Large gel reference volume
n Easy and quick installation
ball valve
system
Main features n Outline cable or BNC connection
n Patented ball design to n Version with temperature sensor
provide linear flow adjustment combined
throughout its range of n Low cost fittings
operation even when the valve n Special version on request
is open just a few degrees
n Flow direction and opening
angle indication plate with 5°
resolution graduated scale for
clear and accurate reading
n DUAL BLOCK® patented
DK/CP
union nut locking system Pneumatically actuated 2-way diaphragm valve
n SEAT STOP® ball carrier Main features
system that allows micro- n New body design for higher flow coefficient
adjustments of the ball seats, n High visibility optical position indicator
guarantees optimal operability n Light and compact piston type actuator in PP-GR
and increases the service life n Long lifetime without maintenance ensured by
the actuator design and the floating pin connection
between the actuator stem and diaphragm
n Customisation plate and TAG ready
n Integrated bracket for valve anchoring
16
THERMOPLASTIC MATERIALS
KEY FEATURES
The success of thermoplastic materials, together with the ease of installation, the minimum maintenance and long
life, has brought them even in most conventional pressure pipeline systems.
PVC-U
Developed in 1930 in Germany, PVC-U
PVC-U Unplasticized
(rigid polyvinyl chloride –unplasticized) is Material
Polyvinyl Chloride
obtained through the polymerization of
a vinyl chloride monomer. Coupling standards Solvent welding
The presence of chlorine in the PVC-U
molecule results in a high performance Range from DN10 to DN500
resin, in terms of thermal stability and Working
chemical and mechanical resistance, up to PN16
pressure classes
up to temperatures of 60° C.
Working
From 0 °C to 60 °C
temperature range
PVC-C
Developed in 1958 by the company
BF Goodrich, now LUBRIZOL, PVC-C PVC-C Chlorinated
(post-chlorinated polyvinyl chloride) is Material Polyvinylchloride, made
obtained by chlorinating the PVC resin in of CORZAN® resin only
suspension. Coupling standards Solvent welding
During the transformation, alternate
hydrogen atom monomers in the PVC Range from DN10 to DN300
molecular chain are replaced by chlorine Working
atoms. up to PN16
Pressure classes
The process produces a high performance
resin with excellent thermal stability, Working
From 0 °C to 100 °C
chemical and mechanical strength up to temperature range
temperatures of 100°C.
PP-H
Polypropylene is a thermoplastic and
partially crystalline resin belonging to PP-H (100) Polypropylene
Material
the family of polyolefins. PP is obtained homopolymer
through the polymerization of propylene Coupling standards Socket and butt welding
(C3H6) with the aid of catalysts. For use Range from DN10 to DN400
in piping systems, the latest-generation Working
Polypropylene Homopolymer variant, up to PN10
pressure classes
or PP-H, offers excellent performance at
working temperatures of up to 100° C Working
From 0°C to 100°C
and a high resistance to chemicals due temperature range
to the excellent physical and thermal
characteristics of the resin.
PE
Polyethylene is a polyolefin, which forms
a separate group among the semi- Material PE100 Polyethylene high density
crystalline thermoplastics. Polyethylene, Coupling standards Butt welding and electrofusion
commercially known as PE, is an
umbrella term for a group of individually Range from DN10 to DN1000
distinctive PE types. Working pressure
PE-HD has an average high density up to PN16
classes
between 0.94-0.965 g/cm3.
Due to its greater strength, the use Working
From -40 °C to 60 °C
of PE100 (density 0.958 g/cm3) is temperature range
increasingly more common in pressure
pipe construction.
17
SYSTEM OVERVIEW
TECHNICAL DATA AND RANGE
VALVES
Product group Type Range Description
VKD DN 10÷100 Industrial ball valve
VKD/CE DN 10÷100 Industrial ball valve with electric actuator
VKD/CP DN 10÷100 Industrial ball valve with pneumatic actuator
VKR DN 10÷50 Regulating ball valve
VKR/CE DN 10÷50 Regulating ball valve with modulating electric actuator
18
Actuation PVC-U PVC-C PP-H
Manual PN 16 PN 16 PN 10
Electric up to PN 16 up to PN 16 PN 10
Pneumatic up to PN 16 up to PN 16 PN 10
Manual PN 16 PN 10
Electric up to PN 16 PN 10
Manual PN 16 PN 16 PN 10
Electric up to PN 16 up to PN 16 PN 10
Pneumatic PN 16 PN 16 PN 10
Manual PN 16 PN 16
Electric up to PN 10 up to PN 10
Pneumatic up to PN 6 up to PN 6
Manual PN 16
Manual up to PN 16 up to PN 16 up to PN 10
Electric up to PN 16 up to PN 16 up to PN 10
Pneumatic up to PN 16 up to PN 16 up to PN 10
Manual up to PN 16
Electric up to PN 16
Pneumatic up to PN 16
Manual PN 10 PN 10 PN 10
Pneumatic PN 10 PN 10 PN 10
Manual up to PN 10 up to PN 10 up to PN 10
Pneumatic up to PN 6 up to PN 6 up to PN 6
Hand PN 6 PN 6 PN 6
Pneumatic PN 6 PN 6 PN 6
Self PN 10
Self PN 16 PN 16
Self PN 16
Self PN 5
Self up to PN 16 up to PN 10
Self PN 6 PN 6
Self PN 16
Self up to PN 10 up to PN 10
Self up to PN1 0 up to PN 10
Self up to PN 10
PN 16
- up to PN 16 up to PN 10
DN 10-50
Manual up to PN 16
Self PN 16
Self PN 16
19
SYSTEM OVERVIEW
TECHNICAL DATA AND RANGE
PIPES AND FITTINGS
Product group Description
* Traded
20
PVC-U PVC-C PP-H PE
PN 16 PN 16
d 12÷500 d 16÷200
PN 16 PN 16
d 16÷125 d 16÷63
PN 16
d 1/2”÷8”
PN 10
d 20÷110
PN 10
d 20÷63
up to PN 10 up to PN16
d 20÷400 d 16÷1000
up to PN 10
d 20÷63
up to PN 16 up to PN 16 up to PN 10 up to PN 16
d 16÷315* d 16÷200 d 20÷400 d 16÷600*
n n n n n
n n n n n
n n n n n n
n n n n n n
n n n n n
n n
n n
n n
n n
n n
n n
Transmitter / PLC n
Transmitter / PLC n
21
SPA FACILITY
ITALY
PROJECT
The new San Pellegrino SPA, located in the Province of Bergamo,
northern Italy, has been constructed by QC Terme. The building
is characterized by restored frescoes, colonnades and early
twentieth century ceilings merge with modern architecture and
the facility allows to enjoy a thermal bath in the world’s most
famous water.
All the thermal baths of the SPA facility have a specific water
temperature and a dedicated water treatment plant that includes
sand filtration, UV system, disinfection and pH adjustment skids.
QC Terme, one of the most important and innovative player for
thermal and wellness sectors and hotel accommodations, gives
experiences that improve the quality of life and moments of
gratification, vitality and joy. Thermal baths, wellness centers and
charming hotels in Bormio, Pré Saint Didier, Milano, Torino, Monte
Bianco, Roma, San Pellegrino Terme and in the Dolomites.
PRODUCTS SELECTION
Type Model Material Actuation Connection Size Gasket
Two way water ball valves VEE PVC-U Manual Socket welding up to DN50 EPDM
Water butterfly valves FE PVC-U Manual Flanged up to DN125 EPDM
Industrial butterfly valves FK PVC-U Manual Flanged up to DN125 EPDM
Industrial butterfly valves FK/CP PVC-U Pneumatic Flanged up to DN125 EPDM
Sediment strainer valves RV PVC-U - Socket welding up to DN50 EPDM
Flow monitor M9.02 PVC-U - Wall mount - -
22
OLYMPIC SWIMMING FACILITIES
BRAZIL
PROJECT
The Rio 2016 Olympics has chosen the Italian company Myrtha
Pools to equip all 18 swimming facilities with state-of-the-art
pool technology and FIP valves. For the first time, the Olympic
swimming and water polo competitions are held in temporary
pools that have been dismounted and repositioned in other
Brazilian locations at the end of the event.
This has been possible because the swimming facilities were
made by Myrtha Pools with the innovative modular system
Myrtha, developed in over 50 years of know-how and expertise
increasing.
TECHNICAL SOLUTION
FIP is proud to have contributed to the success of this
prestigious Italian company through several years of constant
collaboration focused on the improvement of our valves, in order
to satisfy the requirements of reliability, simplicity of installation
and long life required by the plant designers and engineers.
Today, FIP can be proud to have provided the over 1000 ball
valves (VEE series) and butterfly valves (FE e FK series), from
DN25 to DN300, that have been installed in the water treatment
plants of the Olympic Park in Rio, the heart of each pool.
Ball check valves (SXE series), sediment strainer valves
(RV series), angle seat check valves (VR series) and fittings
complete the thermoplastic package for this important project.
Rio 2016 Olympics
has chosen the
made in Italy for
all 18 swimming
facilities as a
guarantee of high
technological level
and reliability.
PRODUCTS SELECTION
Type Model Material Actuation Connection Size Gasket
Two way water ball valves VEE PVC-U Manual Socket welding up to DN100 EPDM
Industrial butterfly valves FK PVC-U Manual Flanged up to DN300 EPDM
Water butterfly valves FE PVC-U Manual Flanged up to DN200 EPDM
Ball check valves SXE PVC-U Self Socket welding up to DN100 EPDM
Angle seat check valve VR PVC-U Self Socket welding up to DN100 EPDM
Sediment strainer valves RV PVC-U - Socket welding up to DN100 EPDM
Fittings - PVC-U - Socket welding up to DN300 EPDM
23
ALIAXIS WORLDWIDE
24
THE ALIAXIS DISTRIBUTION NETWORK
25
LESPSPROM - 06/2017
www.fipnet.com