Sei sulla pagina 1di 5

PERSONAL INFORMATION

 NAME : KOPPOLU SRINIVASULU

 FATHERS NAME : RAMAIAH

 DATE OF BIRTH : 03.08.1967

 QUALIFICATION : DRAUGHTSMAN CIVIL (ITI)

 DESIGNATION : Sr. QA/QC Engineer

 EXPERIENCE : 14 YEARS

 ADDRESS : Pellakur Colony


Kovur (Post),Nellore (Dist), Andhra Pradesh (State).PIN: 524137

 NATIONALITY : INDIAN
 RELIGION : HINDU
 PHONE.NO : 9652869101

ABOUT MY SELF:

Highly energetic with positive attitude accomplish assignments & with quality, Good
Communication, interpersonal and analytical skills oriented.
An astute professional with nearly 12 years of extensive experience in Quality Control for
Pavements and Bridge Works for National &;State Highway Projects. Currently serving as a
Sr.QC Engineer for SIBMOST – TATA Projects (NH-216) of Losari – Macharam Highway
Project. Possess outstanding abilities in ensuring quality at the project site by conducting quality
tests and inspection and rejecting any material non-conforming to the laid down standards.
Acquired in-depth exposure to laboratory procedures and field control test of highway projects.
Sound knowledge of ensuring quality of Road construction such as Soils, Concrete, Steel and
Asphalt as per I.S, MORTH and IRC specifications. Well versed with Mix Design for Filter
Layer, Structural Concrete of various grades, High performance concrete &different types of
Bituminous Works (B.M, D.B.M, B.C and S.D.B.C), G.S.B and W.M.M.Adroit in calibration of
Hot Mix Plant and Concrete Batching Plant.

EMPLOYMENT RECORD
 Period : April 2017 to till date.
 Client : MoRTH
 Contractor : SIBMOST – TATA PROJECTS (JV)
 Consultant : Wadia Techno-Engineering Services Ltd
 Project :Losari - Machavaram.
(Rehabilitation and Upgradation of Losari –Machavaram
Section from km 34/230 to km 84/550 of NH-214A (New
NH-216) to Two Lane with Paved shoulder in the state of
Andhra Pradesh under NHDP-IV on EPC Mode.
 Position : Sr. QA/QC Engineer.

Task Performed:

 Sample Collection of Borrow area, existing site samples and conducting suitability tests to
determine soil properties.
 Testing of soil samples for Determination of Subgrade / Sub base CBR Properties.
 Testing of Field Density with Sand Replacement method. Testing of soil Properties like
MDD & OMC, Grain size analysis, LL& PL, FSI and CBR as well as Concrete.
 Testing of aggregates such as Gradation, AIV, FI & EI, Specific Gravity and water
absorption
 Testing of Cement for Consistancy, Fineness, Initial& Final Setting time and Compressive
Strength.
 Sample Collection and testing of Bituminous mix such as Extraction, Extraction
Gradation, Bulk density and Marshall Stability
 Testing of Bitumen Properties like Penetration, Softening, Ductility and Tray test for Rate of
Spread of Emulsions.
 Mix Designs like GSB,WMM,Concrete,DBM.BC&SDBC
 Calibration and Supervision of Hot Mix Plant, WMM plant& Concrete Batch mix plant
 Period : April 2015 to April 2017
 Institute : Geethanjali Institute of Science & Technology, Nellore.
 Position : Sr. Lab Technician

Task Performed:

 Deals with Concrete Technology laboratory, Geotechnical laboratory .

 Period : November 2012 to April 2015


 Client : National Highways Authority of India(NHAI)
 Contractor : JSR Constructions Pvt.Ltd.,
 Consultant : Artefact Projects
 Project : Four Laning of MULBAGAL Ap/KNT Border
Section of NH-4 from Km 216+912 to 239+100 in
State of KARNATAKA to be executed as BOT
(TOLL) on DBFO pattern under NHDP phase -III
 Position : Sr. Lab Technician

Task Performed:

 Sample Collection of Borrow area, existing site samples and conducting suitability tests to
determine soil properties.
 Testing of soil samples for Determination of Subgrade / Sub base CBR Properties.
 Testing of Field Density with Sand Replacement method. Testing of soil Properties like
MDD & OMC, Grain size analysis, LL& PL, FSI and CBR as well as Concrete.
 Testing of aggregates such as Gradation, AIV, FI & EI, Specific Gravity and water
absorption
 Testing of Cement for Consistancy, Fineness, Initial& Final Setting time and Compressive
Strength.
 Sample Collection and testing of Bituminous mix such as Extraction, Extraction
Gradation, Bulk density and Marshall Stability
 Testing of Bitumen Properties like Penetration, Softening, Ductility and Tray test for Rate of
Spread of Emulsions.
 Mix Designs like GSB,WMM,Concrete,DBM.BC&SDBC
 Calibration and Supervision of Hot Mix Plant, WMM plant& Concrete Batch mix plant
 Period : November 2011 to November 2012
 Client : Karnataka state highway important -II
 Contractor : Patel Engineering Ltd
 Consultant : M/s EGIS India Pvt Ltd & AARVEE Associates
 Project : Up gradation off the road from Tinthini(0+000
 to 73+800) of SH-61&SH-15
 Position : Sr. Lab Technician

Task Performed:

 Sample Collection of Borrow area, existing site samples and conducting suitability tests.
 Testing of soil samples for Determination of Subgrade / Sub base CBR Properties.
 Testing of Field Density with Sand Replacement method .Testing of soil Properties like
MDD & OMC, Grain size analysis, LL& PL, FSI and CBR as well as Concrete.
 Testing of aggregates such as Gradation, AIV, FI & EI, Specific Gravity and water
absorption
 Testing of Cement for Consistency, Fineness, Initial& Final Setting time and Compressive
Strength.
 Sample Collection and testing of Bituminous mix such as Extraction, Extraction Gradation,
Bulk density and Marshall Stability
 Testing of Bitumen Properties like Penetration, Softening, Ductility and Tray test for Rate of
Spread of Emulsions.
 Calibration and Supervision of Hot Mix Plant.

 Period : From AUG 2008 to October 2011


 Client : NHAI
 Contractor : Lanco Infratech Ltd
 Concessionaire : Lanco Hoskote Highways Pvt Ltd
 Consultant : M/s Zaidun Leeng sdn-Artifect Projects(J.V)
 PMC : SMEC India Pvt Ltd.
 Project : Construction of Bangalore-Hoskote-Mulbagal
Section from Km 237+700 – 318+000 of NH-
In the state of Karnataka, phase-III A (BOT)

 Position : Sr. Lab Technician

Task Performed:

 Sample Colletion and testing of Bituminous mix such as Extraction, Extraction Gradation,
Bulk density and Marshall Stability

 Testing of Bitumen Properties like Penetration, Softening, Ductility and Tray test for Rate of
Spread of Emulsions.
 Calibration and Supervision of Hot Mix Plant.
 Period : From March 2007 to July 2008
 Employer : PVSRSN Construction
 Project : NH-7, Package NS-2/BOT/AP-3B
 Position : Sr. Lab Technician
 Consultant : BECOM
 Client : NHAI

Task Performed:

 Testing of Field Density with Sand Replacement method .Testing of soil Properties like
MDD & OMC, Grain size analysis, LL& PL, FSI and CBR

 Period : From May 2004 to Feb 2007


 Employer : JSR Constructions Pvt Ltd
 Project : NS-25, NH-7 in the state of Tamilnadu
 Position : Lab Technician
 Consultant : Mukesh Associates.
 Client : NHAI

 Salient features of Project:

The Project is Four Laning from Km 163+400 to 180+000 of BANGALORE to SALEM Madhurai
Section of NH-7 in the State of Tamilnadu.

Task Performed:

 Sample Collection of Borrow area, Existing sits samples and conducting suitability tests.
 Testing of soil samples for Determination of Subgrade / Sub base CBR Properties.
 Testing of Field Density with Sand Replacement method .Testing of oil Properties like
MDD & OMC, Grain size analysis, LL& PL, FSI and CBR as well as Concrete and Asphalt
tests.
 Testing of aggregates such as Gradation, AIV, FI & EI, Specific Gravity and water
absorption.
 Testing of Cement for Consistancy, Fineness, Initial& Final Setting time and Compressive
Strength.

Declaration

I Hear by declare that the information furnished above is true to the best of my
knowledge.

Date: (K.SRINIVASULU)

Potrebbero piacerti anche