Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
806-941 MHz
6) -170 -10
Max Wind Survivability >201 km/hr >125 mph
180 35 30 25 20 15 10 5 0
Wind Load @ 100 mph (161 km/hr) 6)
170 10
Fore/Aft 1245 N 280 lbf
160 20
Side 1250 N 281 lbf 150 30
140 40
130 50
Antenna consisting of aluminum alloy with 120 60
110 70
brass feedlines covered by a gray, UV safe 100 90 80
-160 -20
Ø50-102 mm; Ø2.0-4.0 in. If the lock-down
-170 -10
brace is used, the maximum diameter is
180 35 30 25 20 15 10 5 0
Ø88.9 mm (3.5 in).
170 10
Mounting & Downtilt Bracket Kit 21700000 160 20
150 30
140 40
130 50
Electrical specifications 120
110 70
60 Featuring our Exclusive
100 90 80 3T TechnologyTM
Frequency Range 806-941 MHz
Vertical Antenna Design:
Impedance 50Ω
Connector 3) NE or E-DIN
Female Radiation patterns for all antennas
1 port / Center are measured with the antenna • True log-periodic design allows for
VSWR 1) ≤ 1.35:1 mounted on a fiberglass pole. superior front-to-side characteristics to
minimize sector overlap.
Polarization Vertical
Mounting on a metal pole will typi- • Unique feedline design eliminates the
Gain 1) 19 dBd cally improve the front-to-back need for conventional solder joints in
Power Rating 2) 500 W ratio. the signal path.
Half Power Angle 1) • A non-collinear system with access to
Horizontal Beamwidth 40° every radiating element for broad band-
Vertical Beamwidth 7° width and superior performance.
Electrical downtilt 5) 5° • Air as insulation for virtually no internal
signal loss.
Null fill 1) 5%
Lightning protection Direct ground
Warranty:
This antenna is under a five-year limited
warranty for repair or replacement.
1) Typical values.
2) Power rating limited by connector only.
3) NE indicates an elongated N connector. Revision Date: 08/18/08
E-DIN indicates an elongated DIN connector.
4) Antenna weight does not include brackets.
5) Add’l downtilts may be available. Check website for details.
6) Values reflect installation with all three brackets utilized.