Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Permeability
Ratio
LoadTrac II
The LoadTrac II loadframe provides compression/
extension testing for a number of geotechnical tests
that must have accurate control of the rate of
displacement during loading. With accessories, the
unit can perform CBR, unconfined compression and
triaxial shear phase testing.
™ compatibility allows
APPLICABLE TEST STANDARDS unit to be accessed and
ASTM D-1883 controlled over a computer
AASHTO T-193 " Standard Method for CBR network
(California Bearing Ratio ) of Laboratory- Generate columns of data for
Compacted Soils"
easy reduction using your own
spreadsheet software
SPECIFICATIONS
Capacity 22 or 45 kN (5K and 10K lb.)
Motor Stepper motor with built-in controls
Speed Range 0.00003 to 15 mm per minute (0.000001 to
0.6 in per minute)
Travel 76 mm (3 inches) resolved to 0.0013 mm
(0.00005 inches)
Clearance 300 mm (12 inches) horizontal between
uprights, 800 mm (32 inches) vertical platen
to crosshead
Power 11/220 vAC, 50/60 Hz, 1 o
Dimensions 464 mmm x 546 mm x 1206 mm
Weight 55 kg (120 lbs.)
Models
LT II-5000 22 kN (5,000 lb.) frame capacity
LT II-10000 45 kN (10,000 lb.) frame capacity
Accessories
CBR-500 CBR plunger and load cell adaptor and 2kN (500 lb.) load cell (do not include CBR mold,
weights or other mold accessories)
CBR-2000 CBR plunger and load cell adaptor (do not include CBR mold, weights or other mold
accessories) and 10kN (2,000 lb.) load cell
CBR-5000 CBR plunger and load cell adaptor and 22kN (5,000 lb.) load cell (do not include CBR mold,
weights or other mold accessories)
CBR-10000 CBR plunger and load cell adaptor and 45kN (10,000 lb.) load cell (do not include CBR
mold, weights or other mold accessories)
Geo-NET-PC Network card and cable to link loadframe to PC
CBR Software package to automatically run CBR test on LoadTrac II and produce test report