Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Press Special
2
service plugs
REF 139TA3152 & REF 139TA3165
Use
The service plug is developed to plug hoses or rigid
pipes to avoid oils and chemicals from contaminating
the environment and to preserve costly oils and
liquids inside systems during maintenance and repair.
It can also be used to protect machine channels from
dust and corrosion and when cleaning or painting, to
prevent water, paint, dust and pollution from harming
system and components. Important: For use in non-
pressurized systems and vacuum systems.
Material
High quality oil resistant rubber
Dimensions
REF 139TA3152 For channels and hoses of 12 - 43 mm
REF 139TA3165 For channels and hoses of 12 - 23 mm
Tools
No tools needed! Use your hand: insert, push then
push and twist in the same action.
HAND PRESS
REF 105TA4798
3
PRESS FOR HYDRAULIC HOSES (1 1/4”)
REF 139TA3146
TECHNICAL DETAILS
• Maximum hose dimensions 1 ¼”
• Crimping capacity 1500 kN
• Maximum crimping diameter 55 mm
• Maximum opening (mm) Die diameter + 26
• Standard motor 3,6 kW 380 V 3-phase (different voltages available)
• Control Digital controller
• Main die opening / Length 124 / 80 mm
• Crimping range 10 - 55 mm
• Weight 250 kg (including oil) - Sold without oil
• Dimensions (L x W x H) 600 x 480 x 1300 mm
• Die sets Standard 10 - 13 - 16 - 19 - 22 - 26 - 30 - 34 - 39 - 45
• Quick change-set
• Foot pedal or back stop device
• Stand for machine
Discover all our products
related
to hydraulics in our parts
catalogue Hydraulic system
parts
REF 14702080
4
PRESS FOR HYDRAULIC HOSES (2”4SP)
REF 138TA4552
TECHNICAL DETAILS
• Maximum hose dimensions 2” 4SP
• Crimping capacity 2200 kN
• Maximum crimping diameter 79 mm
• Maximum opening (mm) Die diameter + 32
• Standard motor 3,6 kW 380 V 3-phase (different voltages available)
• Control Digital controller
• Main die opening / Length 132 / 80 mm
• Crimping range 10 - 79 mm
• Weight 300 kg (including oil) - Sold without oil
• Dimensions (L x W x H) 600 x 480 x 1300 mm
• Die sets Standard 10 - 13 - 16 - 19 - 22 - 26 - 30 - 34 - 39 - 45 -
52 - 57 - 64 - 69
5
PRESS FOR HYDRAULIC HOSES (2”4SP)
REF 139TA3147
TECHNICAL DETAILS
• Maximum hose dimensions 2” 4SP
• Crimping capacity 2400 kN
• Maximum crimping diameter 88 mm
• Maximum opening (mm) Die diameter + 65
• Standard motor 5,5 kW 380 V 3-phase (different voltages available)
• Control Digital controller
• Main die opening / Length 163 / 97 mm
• Crimping range 10 - 88 mm
• Weight 1150 kg (including oil) - Sold without oil
• Dimensions (L x W x H) 850 x 1000 x 1500 mm
• Die sets Standard 10 - 13 - 16 - 19 - 22 - 26 - 30 - 39 - 45 - 52 -
57 - 64 - 69 - 74 - 78
• Quick change-set
• Foot pedal
• Back stop device
• Stand for machine
6
PRESS FOR HYDRAULIC HOSES (4”)
REF 139TA3148
TECHNICAL DETAILS
• Maximum hose dimensions 4”
• Crimping capacity 2800 kN
• Maximum crimping diameter 126 mm
• Maximum opening (mm) Die diameter + 82
• Standard motor 5,5 kW 380 V 3-phase (different voltages available)
• Control Digital controller
• Main die opening / Length 220 / 97 mm
• Crimping range 10 - 126 mm
• Weight 1200 kg (including oil) - Sold without oil
• Dimensions (L x W x H) 850 x 1000 x 1600 mm
• Die sets Standard 10 - 13 - 16 - 19 - 22 - 26 - 30 - 39 - 45 - 52 -
57 - 64 - 69 - 74 - 78 - 84 - 92 - 100 - 108 - 116
• Quick change-set
• Foot pedal
• Back stop device
• Stand for machine
7
PRESS FOR HYDRAULIC HOSES (6”)
REF 139TA3149
TECHNICAL DETAILS
• Maximum hose dimensions 6”
• Crimping capacity 3800 kN
• Maximum crimping diameter 202 mm
• Maximum opening (mm) Die diameter + 125
• Standard motor 5,5 kW 380 V 3-phase (different voltages available)
• Control Digital controller
• Main die opening / Length 335 / 116 mm
• Crimping range 10 - 202 mm
• Weight 2000 kg (including oil) - Sold without oil
• Dimensions (L x W x H) 1000 x 1300 x 1650 mm
• Die sets Standard 10 - 13 - 16 - 19 - 22 - 26 - 30 - 39 - 45 - 52 -
57 - 64 - 69 - 74 - 78 - 84 - 92 - 100 - 108 - 116 - 126 -
136 - 146 - 156 - 166 - 178 - 190
• Quick change-set
• Foot pedal
• Back stop device
• Stand for machine
8
CUTTING MACHINE
REF 139TA1911
Use
New model, particularly suitable for cutting flexible hoses, electrical cables, metal- and
plastic-covered hoses, … one by one or in small batches. Easily transportable, the only power
supply required is a simple 220 V single-phase 10 A socket. This model is ideal for on-site work.
Technical details
• Maximum cutting diameter 50 mm
• Bevelled cutting blade Ø 200 x 1,6 x 30 mm
• Dimensions (H x W x L) 530 x 430 x 550 mm
• Weight 17 kg
• Bench mode
• Manual control
• Single lever to bend and cut hoses
• 2.1 kW - 230 V - 50 Hz single-phase electric motor with hold-to-run control
9
hose cutting and skiving machine
REF 139TA3150 (Type TD4)
Technical details
• Max cutting diameter 65 mm
• Bevelled cutting blade Ø 300 x 3 x 30 mm
• Brush Ø 200 x 25 x 25 mm
• Dimensions H x L x W 780 x 540 x 670 mm
• Weight 73 kg
• Bench model with manual controls
• Single lever to bend and cut hoses
• Equipped with removable protective covers on both the skiving and cutting side
• 3 kW - 400 V - 50 Hz - three-phase high torque electric motor
• Direct starting, protected by heat sensor
• Equipped with 10 interchangeable gauges from Ø 4,2 to 37,8 mm
• Supplier without dust-extractor, equipped with a connection to an external dust-
extraction system
10
hose cutting and skiving machine
REF 139TA3164 (Type TD6)
Technical details
• Capacity 2” - 4 steel layers
• Max cutting diameter 100 mm
• Bevelled cutting blade Ø 400 x 4 x 30 mm
• Brush Ø 200 x 25 x 25 mm
• Dimensions H x L x W 500 x 750 x 670 mm
• Weight 90 kg
• Bench model
• 5 kW - 400 V - 50 Hz – three-phase high torque electric model
• Direct starting protected by heat sensor
• Equipped with 11 interchangeable gauges from Ø 4 to 50 mm
11
MULTI-FUNCTIONAL HYDRAULIC PRESS
REF 124TA1933
Use
By using different tool kits this hand-press can be used as
• A chain cutter
• Electrical cable connector press
• Bearing press
Only to be used with optional accessories.
TECHNICAL DETAILS
• Light-weight Only 26 kg
• Handy size 635 x 305 x 260 mm
• Multi-functional Can also be used to fit electric cable connectors and to
(dis)assemble roller bearings
• Fitted with a safety screen
TVH 17868205 • 09-2011 • MD
TOOL KITS
REF 124TA1934 1/2” - 3/4” chains
REF 124TA1935 1” - 1”1/2 chains
REF 124TA1936 Electric cables & connectors (16 - 25 - 35 - 50 - 70 mm)
REF 124TA1937 Bearings
12