Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
• Project Survey
◦ MechEng Student Survey
◦ ElecEng Student Survey
• Available Projects
◦ Mechanical Engineering
◦ Electrical Engineering
◦ Group Projects
The survey will open on Tuesday 1st of October - 04:15 PM Europe/London time and will close on 1st of
October.
Supervisor▲▼ Title▲▼
PID▲▼ Description▲▼
Group▲▼ Comp▲▼
Supervisor: Dhimish
Mahmoud
m.a.dhimish@hud.ac.uk
Title: Predicting solar
irradiance using the analysis Description: Predicting solar irradiance has been an
of Photovoltaic (PV) important topic in renewable energy generation.
theoretical curves Prediction improves the planning and operation of
Type: Software photovoltaic systems and yields many economic
7 Skills: Computing skills, advantages for electric utilities. Therefore, this
LabVIEW or C++ projects aims to develop a LabVIEW-based software
Resources: LabVIEW to predict solar irradiance using the analysis of the
software. theoretical I-V and P-V curves of Photovoltaic (PV)
Group: Not Related system.
Company:
Area: Electrical_Engineering
A: Active and available for
2019/20
Photovoltaic Installations
Type: Analysis
Skills: MATLAB or Minitab
were fitted in 2006 and 2014. Hence, this project will
Resources: Access to PC
investigate the energy generation and degradation of
and MATLAB or Minitab
both PV installations using data analytical software
software
such as Minitab and SPSS. The monthly, quarterly
Group: Not Related
and yearly energy generation is expected to be
Company:
analysed and compared.
Area: Electrical_Engineering
A: Active and available for
2019/20
Supervisor: Dhimish
Mahmoud
m.a.dhimish@hud.ac.uk
Title: Desing of Positive-
Negative-Ground (PNG)
power supply Description: This project aims to design and build a
Type: Design & build positive-negative-ground power supply form a single
Skills: Electronics systems power supply source. As most microcontrollers have
10 design, computing skills, NI output voltages of 3.3, 5 or 9V, the electronic circuit
MultiSim. will be built and testified on these voltage levels. Real
Resources: NI MultiSim, and simulated results will be compared using NI
electronics compenents. MultiSim software.
Group: Not Related
Company:
Area: Electrical_Engineering
A: Active and available for
2019/20
Supervisor: Dhimish
Description: Solar photovoltaic (PV) is an important
Mahmoud
part of the UK’s energy mix and very much a
m.a.dhimish@hud.ac.uk
renewables success story – overall deployment has
Title: Renewable Innovation
surpassed expectations. Since 2010, from a starting
Example: Solar Photovoltaic
point of almost zero, the industry, have now
in the UK
exceeded 4GW of capacity. This is a fantastic
Type: Review
achievement. It means that the UK now has enough
11 Skills: Data Analysis
solar to power more than 900,000 homes with over
Techniques.
half a million households now benefiting from
Resources: Access to PC
generating their own solar energy. This project will
Group: Not Related
investigate the past, current and future-planned solar
Company:
PV deployment across the UK, and a comprehensive
Area: Electrical_Engineering
overview of the global PV market will be addressed
A: Active and available for
and compared with the UK.
2019/20
A: Active and available for optimum number of bypass diodes to use with partial
2019/20 shaded PV modules.
Supervisor: Dhimish
Mahmoud
m.a.dhimish@hud.ac.uk
Title: Experimental
investigation of the effect of Description: Partial shading of a photovoltaic (PV)
partial shading on systems has an inconsistent influence on the power
photovoltaic performance production. Therefore, this project aims to outline the
Type: Analysis impact of partial shading on PV systems
14
Skills: Data Analysis performance. Various experiments will be carried out
Techniques. using different shading scenarios to examine the
Resources: Access to PC. impact of shading on an existing 2.2 kW PV system
Group: Not Related installed at the University of Huddersfield.
Company:
Area: Electrical_Engineering
A: Active and available for
2019/20
Company:
Area: Electrical_Engineering
A: Active and available for
2019/20
matlab
Resources: NA
Group: Not Related
note that for this project the attendance of weekly
Company:
follow-up meetings is mandatory.
Area: Electrical_Engineering
A: Active and available for
2019/20
Type: Modelling
Skills: Strong computational
ability commercially available software to simulate the ion
Resources: PC on which to beam from source to sample, including all of the
install licensed software electrostatic focussing and steering modules and
Group: Not Related then use this model to determine the effect that an
Company: aging power supply would have on the trajectory of
Area: Electrical_Engineering the beam.
A: Active and available for
2019/20
Supervisor: Martin Haydn Description: Homes with solar PV system are paid
h.p.martin@hud.ac.uk for a fixed proportion of generated power regardless
Title: Investigation of Cloud of how much is used on-site. As such home owners
AI for domestic smart can maximise economic efficiency by using as much
109 scheduling of the generated power as possible. Generally this
Type: Software requires significant effort to manually monitor power
Skills: Programming generation and turn on appliances such as tumble
Resources: PC, smart driers and dishwashers. Some schemes exist to
sockets, energy monitoring divert excess generated power to battery banks or to
112 Supervisor: Schofield Nigel Description: The input of renewable energy sources
n.schofield@hud.ac.uk to local low voltage networks is becoming more and
Supervisor: Donnelly
Stephen Description: The aim of the project is to build a
s.e.donnelly@hud.ac.uk burglar deterrent system for an unoccupied house
Title: Burglar Deterrent that incorporates the following features: (i) infra-red
System motion (or other) detection to detect a potential
Type: Design & build burglar outside a house; (ii) activation of a unit inside
Skills: analogue design, the house that plays back a digital audio recording of
digital design and possibly a (large) barking dog and, with a delay, switches on
some software skills an internal light; (iii) automatic resetting of the device.
129 depending on chosen The objectives of the project will be to build the
methodology. internal and external units with wired or wireless
Resources: Electronic communication between them and to design and
components and test build the internal “light and sound” unit. The student
equipment; may require will be encouraged to research commercially
purchase of specialist audio available chips designed for the digital recording and
recording and playback chip playback of sound to incorporate into the internal
Group: Not Related unit.
Company:
Area: Electrical_Engineering
Area: Electrical_Engineering
A: Active and available for
2019/20
system programming,
research
A neural network-based controller needs to be
Resources: Electronic
designed for driving the robot. The neural network is
components, Raspberry Pi
expected to provide a constant drive signal to enable
programming, sensors.
a smooth and reliable transition. The work needs
Group: Not Related
analysis of the robot behavior when more than one
Company:
target is present and examine ways to prioritize the
Area: Electrical_Engineering
targets.
A: Active and available for
2019/20
A: Active and available for lightweight design in terms of area and power
2019/20 consumption to deliver a portable design.
programming, sensors
Group: Not Related
Company:
Area: Electrical_Engineering
A: Active and available for
2019/20
Supervisor: Williamson
Description: Closed-loop temperature control of
James
scientific instruments is an established and important
james.f.williamson@hud.ac.uk
feature to ensure long-term stability of instruments
Title: Closed-loop
and the resulting measurements. The Centre for
temperature control of
Precision Technologies design, build and test new
precision instrumentation
optical interferometers for measurement of precision
chassis
engineering surfaces. The aim of this project is to
Type: Design & build
design and build a closed-loop digital temperature
286 Skills: analogue or digital,
control system to maintain the interferometer base at
control theory, embedded,
a constant temperature to limit the effect of external
PID
temperature changes on the accuracy of the
Resources: provided by CPT
interferoemter measurements. You will first measure
Group: Not Related
the daily environmental temperature changes and
Company:
then use self-adhesive silicone heating pads and
Area: Electrical_Engineering
electronics of your design to control the
A: Active and available for
interferometer base plate.
2019/20
Supervisor: Williamson
James
james.f.williamson@hud.ac.uk Description: The aim of this project is to develop
Title: Miniature wireless miniature hardware to capture 3 axis vibration data
accellerometer for capture, from machine tool platforms then process and stream
processing and streaming of it to a local database via WiFi. The current solution
machine tool vibration used by the Centre for Precision Technologies relies
Type: Design & build on a Raspberry Pi and an accellerometer
Skills: C++, embedded, communicating via I2C over a long wire. The
289 digital resulting noise from the long I2C connection is not
Resources: Provided by acceptable while the Raspberry Pi is too large and
CPT: ESP32 dev kit, heavy to mount on-machine. The solution you will
accellerometer explore is combination of the existing I2C
Group: Not Related accellerometer paired with a small, light and
Company: Collaborator: Dr inexpensive ESP32 module to capture, process and
Simon Fletcher stream the vibration data to an SQLlite database
Area: Electrical_Engineering connected to the local network.
A: Active and available for
2019/20
Supervisor: Williamson
James
james.f.williamson@hud.ac.uk
Title: Machine vision for Description: The aim of this project is to
powder deposition area automatically measure the area of powder deposited
measurement in on the plunger of a tablet press using machine vision
pharmaceutical tablet presses techniques. Tablets in the pharmaceutical industry
Type: Software are manufactured in a continuous process, however
296 Skills: Machine Vision, build-up of the tablet binding powders on tablet press
OpenCV components leads to product quality issues. This
Resources: Tablet press project will determine the area and methods of build-
plungers. Supplied. up and feed into work to develop a miniature surface
Group: Not Related topography measurement tool for in-line inspection of
Company: tablet press components.
Area: Electrical_Engineering
A: Active and available for
2019/20
Supervisor: Williamson
Description: The aim of this project is to design and
James
build a WiFi connected smart bin to automatically
james.f.williamson@hud.ac.uk
weigh various waste streams in a catering
Title: Internet connected
environment and upload the data to the cloud for
smart bin for automatic food
storage in an SQL database. The University of
waste zoning
Huddersfield currently send all compostable waste
Type: Design
from the HuddersFood kitchens away for biodigestion
Skills: embedded, C++,
instead of flushing or incinerating it. Environmental
digital electronics
297 coordinators at the University of Huddersfield want to
Resources: ESP32 dev kit or
improve the recycling of compostable waste in the
LoRaWAN access.
refectory/serving areas by diverting it from general
Group: Not Related
waste and incineration towards composting by
Company: In collaboration
biodigesting, which creates useful biogas and
with HuddersFood and
fertilizers. The outcome of this project will be used to
Estates
automatically monitor the weight of diverted waste to
Area: Electrical_Engineering
allow university staff to calculate the improvement in
A: Active and available for
waste management and reduction in carbon footprint.
2019/20
Supervisor: Gu Fengshou
Description: Waste heat and vibro-acoustics are
f.gu@hud.ac.uk
inevitably produced in different machines such as
Title: Developing a thermal
electric machines and devices. The project will
Imaging and vibro-acoustics
investigate the inherent models between the waste
based Convolutional Neural
heat generated and vibro-acoustics. Both thermal
Network for Fault Diagnosis of
Images and vibro-acoustics data will be collected
Electric Machines
from machines such as motors and generators. A
311 Type: Analysis
Convolutional Neural Network (CNN) will be
Skills: matlab and dynamics
established to modelling the links between these two
Resources: machining time
physical effect. Then the CNN models will be used to
Group: Not Related
evaluate the performance of detecting and
Company:
diagnosing various faults that induced manually to
Area: Electrical_Engineering
the machines. Finally, the physical mechanisms of
A: Active and available for
the diagnostic achievements will be investigated
2019/20
Supervisor: Vishnyakov
Vladimir
v.vishnyakov@hud.ac.uk
Title: Process monitoring Description: The project aim is to develop hardware
system and software solution for data collection from a
Type: Design & build working material processing system Objectives: 1.
Skills: Matlab, analogue and develop signal conditioning and acquisition hardware
313 digital design solution 2. develop software monitoring system 3.
Resources: electronic store and retrieve data for the processes
components Deliverables: 1. electronic system for signal
Group: Not Related conditioning and acquisition 2. software for system
Company: monitoring 3. functioning data storage solution
Area: Electrical_Engineering
A: Active and available for
2019/20
Supervisor: Vishnyakov
Vladimir
Description: The project aim is to analyse available
v.vishnyakov@hud.ac.uk
methods of solar energy collection and tailor the
Title: Optimisation of solar
methods to the energy requirements objectives: 1.
energy collection
analysis of solar energy and the energy collection
Type: Analysis
methods 2. analysis of end user energy requirements
Skills: data gathering and
314 3. tailor energy collection methods and energy
analysis
transformation methods to the user needs
Resources: web access
deliverables: 1. report on solar energy collection
Group: Not Related
methods 2. analisys of energy requrements for a
Company:
particular (student choise) consumption sector. 3.
Area: Electrical_Engineering
tailored energy supply chain
A: Active and available for
2019/20
Company:
Area: Electrical_Engineering
A: Active and available for
2019/20
Company:
Area: Electrical_Engineering
A: Active and available for
2019/20
Area: Electrical_Engineering
A: Active and available for
2019/20