Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Composition Contents (%) LCERM (1) CAS No OSH (2) PRTR (3)
Skin contact thoroughly wash exposed are with a lot of water and a soap. When there is any change of appearance or the paint
continues, refer for medical attention immediately.
Eye contact Flush with a running water for over 10 minutes, then get medical attention immediately.
Ingestion Wash inside of mouth with water thoroughly, and then get medical attention immediately. When the victim becomes
unconscious, do not give anything through mouth
Storage Store in dry and sheltered area. Keep away from incompatible materials (refer section 10). Avoid freezing and
direct sunshine. Store at 5 ºC to 35 ºC
Material Safety Data Sheet FORTEBOND LIGNO® LGS 006 RELEASE COATING Page 1 of
2
Issue date : August, 2017
The evaluation on hazards herein is no always sufficient, therefore care must be taken when handling.
This MSDS summarizes at the date of issue our best knowledge of the health and safety hazard information of the product, and in particular
how to safely handle and use the product in the workplace.
Since PT. Ligno Specialty Adhesive and its subsidiaries cannot anticipate or control the condition under which the intends to handle and use
the product in workplace.
This product should be properly handled at the user’s responsibility.
While the information and recommendation set fort herein are believed to be accurate as of the date hereof.
We, PT. Ligno Specialty Adhesive, make no warranty, express or implied , with respect there to and disclaims all liability from reliance
thereon. This information is subject to revision.
Material Safety Data Sheet FORTEBOND LIGNO® LGS 006 RELEASE COATING Page 2 of
2