Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1. The radius of an effective weld size of a flare V-groove weld with SAW is:
a) 1/16"
b) 5/16"
c) 1/8"
d) 1/2"
e) 3/16"
a) 1"
b) 1/2"
c) 1-1/2"
d) 2"
e) 3/4"
3. In pre-qualified joint B-U3c-S, the grooves will be of unequal depth, what is the depth of the
shallower groove?
4. Reentrant corners of cut material shall be formed to provide a gradual transition with a radius of not
less than:
a) .1"
b) 10"
c) 1-1/2"
d) 1/2"
e) 1"
a) 0"
b) 1/8"
c) 1/4"
d) 1/16"
e) None of the above
Circle the best correct answer.
6. For a 42" girder the maximum allowable variation from specified depth measured at the web
centerline is:
a) 3/16"
b) 1/8"
c) 5/16"
d) 1/32"
e) 3/32"
7. For procedure qualification using a 3/8 inch thick plate test coupon, what test
specimens are required for a complete joint penetration groove weld?
10. Acceptable criteria for A514 and A517 steels shall be based on visual inspection performed not less
than: