Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
!"# !
$%&'
"#() *"
%'
+", -
.!#,/-+-), "
Inline
Inlet
Discharge
Belt Drive Centrifugal Inline Fan
Standard Construction Features:
- Galvanized steel housing - Backward inclined aluminum wheel - Two bolted
PLAN VIEW access panels - Integral duct connection flanges - Ball bearing motors -
Adjustable motor pulley - Adjustable motor plate - Fan shaft mounted in ball
bearing pillow blocks - Static free belts - Corrosion resistant fasteners
12.5 Options & Accessories:
Switch, NEMA-1, Toggle, Junction Box Mounted & Wired
Inline BLOWER
Inlet 19.875 23 Inlet
Discharge HOUSING
1.0 1.0
22 23
ELEVATION VIEW END VIEW
Dimensional
Weight w/o Weight with
Qty Accessories Accessories
(lb) (lb)
1 108 112
Performance
Requested Actual External Total Operating Airstream Drive Tip
Fan Elevation SE
Volume Volume SP SP Power Temperature Loss Speed
RPM (ft) (%)
(CFM) (CFM) (in. wg) (in. wg) (hp) (F) (%) (ft/min)
2,525 2,525 0.6 0.6 1574 0.73 4,555 70 7.0 6,026 35
Notes:
All dimensions shown are in units of in..
*FLA - based on tables 150 or 148 of National Electrical Code 2002. Actual
motor FLA may vary, for sizing thermal overload, consult factory.
LwA - A weighted sound power level, based on ANSI S1.4
dBA - A weighed sound pressure level, based on 11.5 dB attenuation per Octave
band at 5.0 ft - dBA levels are not licensed by AMCA International
Sones - calculated using AMCA 301 at 5.0 ft
AMCA Licensed for Sound and Air Performance. Power rating (BHP/kW) includes transmission losses.
Greenheck Fan Corporation certifies that the model shown herein is licensed to bear the AMCA Seal. The ratings shown
are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and
comply with the requirements of the AMCA Certified Ratings Program. Performance certified is for installation type B:
Free inlet, Ducted outlet. Power rating (BHP/kW) includes transmission losses. Performance ratings do not include the
effects of appurtenances (accessories). The inlet sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in
a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type B: free inlet
hemispherical sone levels. dBA levels are not licensed by AMCA International. The AMCA Certified Ratings Seal applies
to inlet sone ratings only. Radiated (casing) sound data is the sound generated through the fan housing when the fan is
ducted on both the inlet and outlet.
AESV
Single Duct Terminal Unit
Analog Control, Pressure Independent
Control Enclosure M L
W (Optional on Cooling-Only units)
F G
H 12 1/4"
D
Accessories (Optional)
Check if provided. SteriLoc Liner 1” EcoShield Liner Hanger Brackets
24 V Control Transformer UltraLoc Liner ½” EcoShield Liner (Foil Face) Removable Air Flow Sensor
Dust Tight Enclosure Seal 1" Fiberglass Liner 1” EcoShield Liner (Foil Face) Bottom Access Door
Fibre Free Liner ½” EcoShield Liner Disconnect Switch
General Description
Heavy gauge steel housing. Multipoint center averaging inlet Electric damper actuator is an
Mechanically sealed and velocity sensor. integral part of the unit.
gasketed, leak resistant Electronic proportional room Model AESV can be installed
construction. Less than 2% of thermostat with adjustable horizontally, vertically, or at any
nominal cfm at 1.5" sp wg. setpoints for temperature and angle. Operation is not affected
Dual density internal insulation, airflow is included with unit. by position.
treated to resist air erosion. Minimum and maximum airflow The control enclosure is optional
Meets requirements of NFPA 90A adjustments are made at the and needs be ordered separately
and UL 181. thermostat, using a digital except for units with electric
Rectangular discharge opening is voltmeter. reheat.
designed for slip and drive cleat Choice of right hand or left hand
duct connection. control location.
AESV-2.0 6-17-11
Accessories (Optional)
Hot Water Coil Section
1/2" copper tubes 1 Row
Aluminum ripple fins, 10 per inch 2 Row
Connections: Single circuit, 1/2"
O.D. male solder. Multi-circuit, 7/8" 3 Row
O.D., male solder. 4 Row
Coil is installed at discharge of unit.
On units with attenuators, coil are
installed at the discharge of
attenuator.
12 H
365
8
12 1/4 H
This submittal is meant to demonstrate general dimensions of this product. The drawings are not meant to detail every aspect of the product. Drawings are not to scale. Titus
reserves the right to make changes without written notice.
®
605 Shiloh Road Plano, Texas 972-212-4800
All rights reserved. No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system without permission in writing from Air Distribution Technologies
(),/7 #/2,/7
MOP SERVICE BASINS
!2#()4%#452!,
30%#)&)#!4)/.3
HL-2100
HILOW ® CORLOW ®
HL-1800 SBC-1700
Model No. ( ) Size ( ), as manufactured by Stern-Williams Co., Inc. Shoulders shall not be less than 9-3/4” high inside
measurement, and not less than 1-1/4" wide. All models have 6” drop at threshold. Drain shall be cast brass with stainless steel strainer cast integral
and shall provide for a caulked lead connection not less than 1” deep to a 3” pipe. Receptor composed of pearl gray marble chips and white Portland
cement ground smooth, grouted and sealed to resist stains. Stainless steel cap of one piece 20 ga. 302 stainless steel cast integral on threshold.
!
JOB ARCHITECT
$
LOCATION ENGINEER
MANUAL FAUCETS
911-ISCP
Wall Mounted Service Sink Faucet with Elevated Vacuum Breaker Spout
PRODUCT TYPE
Wall mounted service sink faucet with elevated Job Name ____________________________________________________
vacuum breaker spout
Item Number _________________________________________________
Section/Tag __________________________________________________
FEATURES & SPECIFICATIONS
Model Specified ______________________________________________
• Polished chrome plated finish
Architect _____________________________________________________
• Solid brass body construction
• 8" Rigid valve body centers Engineer _____________________________________________________
• 5 3/4” spout with pail hook and wall brace Contractor ___________________________________________________
• Elevated vacuum breaker, catalog #892G ❏ Submitted as Shown ❏ Submitted with Variations
• 3/4" Male garden hose thread outlet Date _________________________________________________________
• Cross metal handles with tear drop escutcheons and
eight point tapered broach, secured color coded
index buttons, catalog #633
• Slow compression renewable cartridge that closes with
water pressure with tapered square broach to facilitate
handle removal, catalog #217-XTLH
• 1⁄ 2" NPT female union nut supply inlets
• Integral supply stops
• Mounting hardware included
PERFORMANCE SPECIFICATION
• Rated Supply Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140° F
WARRANTY
• Lifetime Limited Faucet Warranty
• 5-Year Limited Cartridge Warranty
• 1-Year Limited Finish Warranty
COMPLIANT TO
• ASME A112.18.1 • CSA B125
EN BU
RE I 2100 South Clearwater Drive
U.S. G
LD
P: 847/803-5000
CO F: 847/803-5454
UNCIL
M
E M B E R
Technical: 800/TEC-TRUE
www.chicagofaucets.com
9/08
911-ISCP
Wall Mounted Service Sink Faucet with
Elevated Vacuum Breaker Spout
ARCHITECT/ENGINEER SPECIFICATION
Chicago Faucets No. 911-ISCP, Polished chrome plated solid cast brass construction. Elevated vacuum breaker, 5 3/4" spout
with pail hook, wall brace and 3/4" male garden hose thread outlet. Cross metal handles with tear drop escutcheons, eight point
tapered broach and secured color coded index buttons. Slow compression renewable cartridge that closes with water pressure
with square tapered broach feature to help facilitate handle removal. 8" rigid valve body centers with 1/2" NPT female union nut
supply inlets. Integral supply stops in body for servicing cartridges. Mounting hardware included. This product is tested and
certified to ASME A112.18.1 and CSA B125 industry standards.
3/8 " [10mm]
OFFSET FOR
1/2" NPT FEMALE ADJUSTMENT
THREAD OUTLET (EACH ARM)
2-7/8"-4-3/8"
(BACK SIDE) 2-5/16" DIA. [73mm-111mm]
[58mm] 3-1/2 " ADJUSTABLE
(2 PLACES) [89mm]
3/4 " AS
[19mm] 1-1/2 " REQUIRED
[38mm]
4"
[102mm] 2-7/8 " 3"
[73mm] [76mm]
2-5/8 "
[67mm]
TO SUIT
5-11/16" 1/2" NPT FEMALE
4"
1-3/8 " [144mm] THREAD INLETS
[102mm]
[35mm]
7/16" DIA. 3/4" A.N. FIN. WALL
2-1/4" DIA.
HOLE IN WALL TO HOSE THREAD [57mm] FLANGE
FIN. FLOOR ADJUST STOPS
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States, offering
a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
US-ADA-SERIES - A - 18 GA.
UNDERMOUNT GROUP
S U B M I T TA L
ADA COMPLIANT
SPECIFICATION
Seamless die-drawn constraction of Type-304, 18-8 stainless steel. Interior and top surfaces
polished to a non-porous Hand-Blended Just Finish with highlighted bowl rim. Fully coated
underside insulated for sound and reduces condensation. Stright-sided compartment with
radius corners provides greater capacity. Conforms to ASME/ANSI A112.19.3M. Certified
conformance with ASME A112.19.3/CSA B45.4, Canadian Standards (CSA), Uniform
Plumbing Code (UPC) and International Plumbing Code (IPC) and Americans with
Disabilities Act (ADA)
D ATA
US-ADA-1616-A 16 16 14 14 4-1/2 to 6-1/2
US-ADA-1618-A 16 18 14 16 4-1/2 to 6-1/2
US-ADA-1620-A 16 20 14 18 4-1/2 to 6-1/2
US-ADA-1818-A 18 18 16 16 4-1/2 to 6-1/2
US-ADA-1821-A 18 21 16 19 4-1/2 to 6-1/2
US-ADA-1824-A 18 24 16 22 4-1/2 to 6-1/2
US-ADA-1830-A 18 30 16 28 4-1/2 to 6-1/2
COMPANY
JUST MANUFACTURING COMPANY
REVISED-11/2003
TITLE D AT E
. . .
9233 KING STREET FRANKLIN PARK ILLINOIS 60131-2111
SIGNATURE
.
PH: 847-678-5150 FAX: 847-678-6817
E-MAIL: custserv@justmfg.com .
www.justmfg.com
3-21
Location:
Symmetrix®
Kitchen Faucet S-23 Series
Specification Submittal Model S-23-2-SM
Ordering Information
Model Numbers Other Options
Append appropriate -suffix to model number. Append appropriate -suffix to model number.
S-23 Faucet only -LST 18 inch copper supply tubing
S-23-1 Faucet with swivel spray aerator in place -BH 20 inch (508 mm) braided hose supplies
of hose and spray (not available with -SM option)
S-23-2 Faucet with hose and spray -10 10-7/8 inch swing spout with aerator
S-23-3 Faucet with hose and spray mounted on
-IPS 1/2 inch IPS connections
escutcheon
-.5 .5 gpm (1.9 L/min) flow restrictor, vandal resist.
Finish Options / Modifications -1.5 1.5 gpm (5.7 L/min) flow restrictor
Append appropriate -suffix to model number.
-VP Vandal resistant, standard 2.2 gpm aerator
-STN Radiance® satin finish *
- Polished chrome (standard finish)
-NA Non-aerated , laminar flow outlet
7-1/4"
184mm
5 1/4
133mm 6-1/4"
159mm
6"
spacer 152mm
7-1/2" 1/2"- 13mm
1/4-20" UNC 191mm with spacer
1-1/4"- 32mm
8-3/4" without spacer
222mm optional 1/2-14
10-7/8" NPT fitting
276mm
8"
203mm
Note: Dimensions subject to change without notice.
7 14"
184mm
6 14"
5 14 "
159mm
133mm
6"
spacer 152mm
1
2 "- 13mm
7 12 " with spacer
1 114 "- 32mm
4 "-20 UNC 191mm
without spacer
8 34 "
222mm
10 78 " optional 12 -14 NPT fitting
276mm
Note: Dimensions subject to 8"
203mm
change without notice.
Dimensions Symmetrix Kitchen Faucet, S-23-SM-10
7 14"
184mm
5 14 "
133mm 6 14"
159mm
13 1 12 " 38mm
16 "- 21mm max. 6" max. deck hole
152mm 7 12 "
191mm
10 78 "
276mm
optional 12 -14 NPT fitting
Note: Dimensions subject to change without notice.
7 14"
184mm
5 14 "
133mm 6 14"
159mm
spacer 1
2 "- 13mm
with spacer
1 114 "- 32mm
4 "-20 UNC
without spacer
20"
3
508mm
8 "-COMP
8 34 "
222mm
10 78 "
276mm
Note: Dimensions subject to 8"
203mm
change without notice.
Dimensions Symmetrix Kitchen Faucet, S-23-SM
7 14"
184mm
5 14 "
133mm 6 14"
159mm
13 1 12 " 38mm
16 "- 21mm max. 6" max. deck hole
152mm 7 12 "
191mm
8 34 "
222mm 1
optional 2 -14 NPT fitting
10 78 "
276mm
786-GN2FCCP
Manual and Metering Faucets
Product Type
___________________________________________________
Deck Mounted 8" Fixed Centers Concealed Hot and Cold
Water Sink Faucet Job Name ________________________________________________
Inlet
[ ] Submitted as Shown [ ] Submitted with Variations
• CFNow! Item Ships in 5 Days
Date _____________________________________________________
Performance Specification
___________________________________________________
• Rated Operating Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140ºF
Warranty
___________________________________________________
• Lifetime Limited Faucet Warranty
• 5-Year Limited Cartridge Warranty
• 1-Year Limited Finish Warranty
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
2100 South Clearwater Drive
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
Last Revision: 02/09/2012 • Date Printed: 04/11/2013 • Product specifications subject to change without notice
ACCESSORIES AND PARTS
116.223.21.1 Plumbing Fixture P4 Faucet
Electronic Faucets
Product Type
___________________________________________________
Deck Mounted Single Hole HyTronic Gooseneck Sink Faucet
with Dual Beam Infrared Sensor Job Name ________________________________________________
Performance Specification
___________________________________________________ Architect _________________________________________________
• Rated Operating Pressure: 20-125 PSI
Engineer _________________________________________________
• Rated Operating Temperature: 40-140ºF
Contractor ________________________________________________
Warranty
___________________________________________________ [ ] Submitted as Shown [ ] Submitted with Variations
• Lifetime Limited Faucet Warranty
• 1-Year Limited Finish Warranty Date _____________________________________________________
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
2100 South Clearwater Drive
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
Last Revision: 07/03/2012 • Date Printed: 04/11/2013 • Product specifications subject to change without notice
Plumbing Fixture P5
COMMERCIAL FIXTURES Tag
Z5220 Series
• 19" x 16" [483mm x 406mm]
• Vitreous china
• Rimless oval design for undermount
installation
• Front overflow
• Waste: 1-1/4" O.D.
• Depth: 5"
• Shipping Weight: 22 lbs.
Engineering Specification
■ Z5220 19" x 16" vitreous china undermount
lavatory.
Recommended Trim
■ Z8743-PC Grid Strainer
■ Z8700 Series P-Trap
Z5220 Series 19" x 16" undermount lavatory.
■ Z8800 Series Stop with Flexible Supplies
■ Z8946-1-NT ADA Trap, Stop, and
Supply Protectors
Optional Trim
■ Z8746-PC ADA Grid Strainer
■ Z8946-3-NT ADA Trap, Stop, and
LAVATORIES
Supply Protectors for Offset Grid Strainers
Fixtures meet ASME A112.19.2 and CSA B45 standard This Space is for Architectural/Engineering Approval
requirements.
Electronic Faucets
Product Type
___________________________________________________
Deck Mounted Single Hole HyTronic Traditional Sink Faucet
with Dual Beam Infrared Sensor Job Name ________________________________________________
Performance Specification
___________________________________________________
• Rated Operating Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140ºF
Warranty
___________________________________________________
• Lifetime Limited Faucet Warranty
• 1-Year Limited Finish Warranty
• 5-Year Limited Mechanical Warranty
• 3-Year Limited Electronics and Solenoid Warranty
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
2100 South Clearwater Drive
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
Last Revision: 07/03/2012 • Date Printed: 04/11/2013 • Product specifications subject to change without notice
COMMERCIAL FIXTURES Tag
Plumbing Fixture P6
Z5340-PED Series
• 20" x 18" [508mm x 457mm]
• Vitreous china
• Faucet holes for single, 4", or 8" centers
• Wall hung lavatory provided with wall hanger
or for use with concealed arm carrier systems
• Vitreous china half pedestal
• Front overflow
• Waste: 1-1/4" O.D.
• Depth: 5-3/4"
• Shipping Weight: 49 lbs.
Engineering Specification
■ Z5341-PED 20" x 18" vitreous china wall
hung lavatory with single faucet hole and half
pedestal. Provided with hanger plate and holes
for concealed arm carrier systems.
■ Z5344-PED 20" x 18" vitreous china wall
Z5340-PED Series 20" x 18" wall hung lavatory with half
hung lavatory with 4" center faucet holes and pedestal shown with Z81101 faucet (sold separately).
half pedestal. Provided with hanger plate and
holes for concealed arm carrier systems.
■ Z5348-PED 20" x 18" vitreous china wall
hung lavatory with 8" center faucet holes and
half pedestal. Provided with hanger plate and
Fixtures meet ASME A112.19.2 and CSA B45 standard This Space is for Architectural/Engineering Approval
requirements.
Inlet
[ ] Submitted as Shown [ ] Submitted with Variations
• CFNow! Item Ships in 5 Days
Date _____________________________________________________
Performance Specification
___________________________________________________
• Rated Operating Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140ºF
Warranty
___________________________________________________
• Lifetime Limited Faucet Warranty
• 5-Year Limited Cartridge Warranty
• 1-Year Limited Finish Warranty
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States,
offering a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
2100 South Clearwater Drive
Des Plaines, IL
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
Last Revision: 02/09/2012 • Date Printed: 04/11/2013 • Product specifications subject to change without notice
Plumbing Fixture P7
Z5660
1.6 GPF ADA Height, Elongated TAG
Floor Mounted Flush Valve Toilet
Z5660 Series
• 1.6 gpf (gallons per flush)
• Vitreous china
• Elongated front rim, 17" high,
ADA compliant
• 2" fully glazed trapway
• Siphon jet flush action
• 1-1/2" top spud
• Includes bolt caps
• Shipping Weight: 57 lbs.
Engineering Specification:
Z5660 with Top Spud
Vitreous china, 1.6 gpf [6 Lpf] low
Z5660 Series consumption, ADA compliant, floor
mounted toilet with siphon jet flush action
and elongated front rim with 1-1/2" top
Recommended Trim: spud and two bolt caps.
Distributed by:
FINISHED WALL
1 [25]
I.P.S. SUPPLY
FINISHED FLOOR
Distributed by:
Flush Cycle
Model 111-1.6 Low Consumption (1.6 gpf/6.0 Lpf)
Model 110 Water Saver (3.5 gpf/13.2 Lpf)
Specifications
Quiet, Exposed, Diaphragm Type, Chrome Plated Closet Flushometer for left or right
handwith the following features:
• PERMEX® Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass
• ADA Compliant Metal Oscillating Non-Hold-Open Handle with Triple Seal Handle
Packing
• 1” I.P.S. Screwdriver Bak-Chek® Angle Stop
• Free Spinning Vandal Resistant Stop Cap
• Adjustable Tailpiece
• High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom Hex
Coupling Nut
• Spud Coupling and Flange for 1½” Top Spud
• Sweat Solder Adapter with Cover Tube & Cast Wall Flange with Set Screw
• High Copper, Low Zinc Brass Castings for Dezincification Resistance
• Non-Hold-Open Handle, Fixed Metering Bypass and No External Volume Adjustment
to Ensure Water Conservation
• Flush Accuracy Controlled by CID™ Technology
• Diaphragm, Handle Packing, Stop Seat and Vacuum Breaker molded from PERMEX®
Rubber Compound for Chloramine Resistance
Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy
Classification for Semi-Red Brass. Valve shall be in compliance to the applicable
sections of ASSE 1037.
Variations
HL-3 3” Metal Oscillating Push Button on Front of Valve (does not meet
ADA requirements)
Made with
Renewable Energy H Handle on Front of Valve
TP Trap Primer
YG Extended Bumper on Angle Stop (for seat with cover)
YO Bumper on Angle Stop (for open front seat without cover)
SG SaniGuard® Antimicrobial Handle and Socket
Accessories
See Accessories Section of the Sloan catalog for details on these and other Flushometer
variations.
Fixtures
Consult Sloan for Sloan brand matching fixture
options.
Variations Specified
Customer/Wholesaler
Contractor
Architect
The information contained in this document is subject to change without notice.
SLOAN VALVE COMPANY • 10500 SEYMOUR AVE. • FRANKLIN PARK, IL. 60131
Royal 110/111 S.S. — Rev. 1e (03/12) Ph: 1-800-982-5839 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380
Copyright © 2012 SLOAN VALVE COMPANY www.sloanvalve.com
Plumbing Fixture P8
Z5650
1.6 GPF Elongated Floor Mounted TAG
Flush Valve Toilet
Z5650 Series
• 1.6 gpf (gallons per flush)
• Vitreous china
• Elongated front rim
• 2" fully glazed trapway
• Siphon jet flush action
• 1-1/2" top spud
• Includes bolt caps
• Shipping Weight: 55 lbs.
Engineering Specification:
Z5650 with Top Spud
Vitreous china, 1.6 gpf [6 Lpf] low
Z5650 Series consumption, floor mounted toilet with
Recommended Trim: siphon jet flush action and elongated front
rim with 1-1/2" top spud and two bolt caps.
Z6000AV-WS1
AquaVantage® ‘AV’ low con Z5651 with Top Spud and Bedpan Lugs
sumption 1.6 gpf exposed closet Vitreous china, 1.6 gpf [6 Lpf] low
flush valve. consumption, floor mounted toilet with
siphon jet flush action and elongated front
Z5955SS-EL Elongated, rim designed to accommodate a bedpan
standard white, open front toilet with 1-1/2" top spud and two bolt caps.
seat less cover with stainless
steel check hinge. This space is for Architectural/engineering Approval
Optional Trim:
Z5795-FLO-JR PVC Flo-Bowl Jr. closet
flange kit
These dimensions and specifications are subject to change without
Optional Water-Savings Trim: notice.
Z6000AV-DF-WS1 AquaVantage® AV dual Fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/
flush water-conserving exposed closet flush valve CSA B45 requirements.
(estimated 30% potential water savings). See Zurn One Systems for suggested packages.
Distributed by:
FINISHED WALL
1 [25]
I.P.S. SUPPLY
FINISHED
FLOOR
These dimensions and specifications are subject to change without Fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/
notice. CSA B45 requirements.
Distributed by:
Flush Cycle
Model 111-1.6 Low Consumption (1.6 gpf/6.0 Lpf)
Model 110 Water Saver (3.5 gpf/13.2 Lpf)
Specifications
Quiet, Exposed, Diaphragm Type, Chrome Plated Closet Flushometer for left or right
handwith the following features:
• PERMEX® Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass
• ADA Compliant Metal Oscillating Non-Hold-Open Handle with Triple Seal Handle
Packing
• 1” I.P.S. Screwdriver Bak-Chek® Angle Stop
• Free Spinning Vandal Resistant Stop Cap
• Adjustable Tailpiece
• High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom Hex
Coupling Nut
• Spud Coupling and Flange for 1½” Top Spud
• Sweat Solder Adapter with Cover Tube & Cast Wall Flange with Set Screw
• High Copper, Low Zinc Brass Castings for Dezincification Resistance
• Non-Hold-Open Handle, Fixed Metering Bypass and No External Volume Adjustment
to Ensure Water Conservation
• Flush Accuracy Controlled by CID™ Technology
• Diaphragm, Handle Packing, Stop Seat and Vacuum Breaker molded from PERMEX®
Rubber Compound for Chloramine Resistance
Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy
Classification for Semi-Red Brass. Valve shall be in compliance to the applicable
sections of ASSE 1037.
Variations
HL-3 3” Metal Oscillating Push Button on Front of Valve (does not meet
ADA requirements)
Made with
Renewable Energy H Handle on Front of Valve
TP Trap Primer
YG Extended Bumper on Angle Stop (for seat with cover)
YO Bumper on Angle Stop (for open front seat without cover)
SG SaniGuard® Antimicrobial Handle and Socket
Accessories
See Accessories Section of the Sloan catalog for details on these and other Flushometer
variations.
Fixtures
Consult Sloan for Sloan brand matching fixture
options.
Variations Specified
Customer/Wholesaler
Contractor
Architect
The information contained in this document is subject to change without notice.
SLOAN VALVE COMPANY • 10500 SEYMOUR AVE. • FRANKLIN PARK, IL. 60131
Royal 110/111 S.S. — Rev. 1e (03/12) Ph: 1-800-982-5839 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380
Copyright © 2012 SLOAN VALVE COMPANY www.sloanvalve.com
Plumbing Fixture P9
Z5750
TAG
0.5 - 1.0 gpf Washout Urinal
Z5750 Series
• 0.5 - 1.0 gpf (gallons per flush)
• Vitreous china
• Washout flushing action
• 3/4" top spud
• 2" I.P.S. outlet flange and rubber gasket
with integral trap
• 14" extended rim for handicap compliance
when installed at proper height
• Shipping Weight: 65 lbs.
Engineering Specification:
Z5750 with 3/4" top spud, vitreous china,
0.5gpf [1.9 Lpf] 1.0 gpf [3.8 Lpf] low
consumption, wall hung urinal with 3/4" top
spud and concealed wall hanger brackets.
Z5750 Series
Recommended Trim:
Z6003AV-WSI
AquaVantage® AV low consumption exposed
urinal flush valve.
Z5978-STR This space is for Architectural/engineering Approval
REV. F DWG. NO. 80551 DATE: 9/19/06 C.N. NO. 95619 PRODUCT NO. Z5750
Z5750
0.5 - 1.0 gpf Washout Urinal
TAG
2X SCALE 43
4 [121]
3
4 [19] 1 [25]
I.P.S. SUPPLY
1
2 [13]
25
8 [67]
11
16 [17] 1 [292]
112
21
2 [64]
CLIP
14 [356]
1 [470]
182
1 [361] 1 [470]
182 1 [667]
144 264
1 [114]
42
C.L. OUTLET
2 [51] 38 [965]
24 [610] 1 [140]
1 [495]
192 52
(17 [432] ADA)
REV. F DWG. NO. 80551 DATE: 9/19/06 C.N. NO. 95619 PRODUCT NO. Z5750
Plumbing Fixture P9 Flush
Valve Royal® Model
Flushometer
Description
Exposed Urinal Flushometer, for ¾” top spud urinals.
Flush Cycle
Model 186-0.5 (0.5 gpf/1.9 Lpf)
Model 186-1.0 Low Consumption (1.0 gpf/3.8 Lpf)
Model 186 Water Saver (1.5 gpf/5.7 Lpf)
Specifications
Quiet, Exposed, Diaphragm Type, Chrome Plated Urinal Flushometer
with the following features:
• PERMEX™ Synthetic Rubber Diaphragm with Dual Filtered Fixed
Bypass
• ADA Compliant Metal Oscillating Non-Hold-Open Handle with Triple
Seal Handle Packing
• ¾” I.P.S. Screwdriver Bak-Chek® Angle Stop
• Free Spinning Vandal Resistant Stop Cap
• Adjustable Tailpiece
• High Back Pressure Vacuum Breaker Flush Connection with One-piece
Bottom Hex Coupling Nut
• Spud Coupling and Flange for ¾” Top Spud
• Sweat Solder Adapter w/Cover Tube & Cast Wall Flange w/Set Screw
• High Copper, Low Zinc Brass Castings for Dezincification Resistance
• Non-Hold-Open Handle, Fixed Metering Bypass and No External
Volume Adjustment to Ensure Water Conservation
Made with
Renewable Energy
• Flush Accuracy Controlled by CID™ Technology
• Diaphragm, Handle Packing, Stop Seat and Vacuum Breaker molded
from PERMEX™ Rubber Compound for Chloramine Resistance
• 100% of the energy used in manufacturing is offset with Renewable
Energy Sources – Wind Energy
Valve Body, Cover, Tailpiece and Control Stop shall be in conformance
with ASTM Alloy Classification for Semi-Red Brass. Valve shall be in
compliance to the applicable sections of ASSE 1037 and ANSI/ASME
A112.19.2.
Variations
HL-3 3” Metal Oscillating Push Button on front of valve
(does not meet ADA requirements)
SG SaniGuard® Antimicrobial Handle and Socket
See Accessories Section of the Sloan catalog for details on these and
other Flushometer variations.
Variations Specified
Customer/Wholesaler
Contractor
Architect
The information contained in this document is subject to change without notice.
DE SCRIPTION
INVUE ®
Entri LED features a classic and stylish design with the added benefits Type
of solid state lighting technology, offering outstanding uniformity and Catalog #
energy savings. Using Cooper Lighting’s proprietary LED LightBAR™
technology and AccuLED optical systems, Entri LED offers designers vast Project
versatility in system design, function and performance. Use Entri LED
for wall mount architectural lighting applications and egress lighting Date
Comments
requirements. UL/cUL listed for use in wet locations.
Prepared by
SP E CIFICATION FEATURES
C o n s t r uc t ion O pt ic s Mounting
HOUSING: Heavy wall, one piece DISTRIBUTION: Primary JUNCTION BOX: Standard with
die-cast aluminum construction downlight distribution offers a zinc plated quick-mount junction
for precise tolerance control and choice of six (6) patented, high box plate that mounts directly to
repeatability in manufacturing. efficiency AccuLED Optics™, that 4" J-Box. LightBARs mount facing
Integral extruded aluminum heat maximize light collection and downward. Fixture slides over
sink provides superior thermal directional distribution onto the mounting plate and is secured with
heat transfer in +40°C ambient application region. Each optical two (2) stainless steel fasteners.
environments. Housing and heat lens is precision manufactured via Mounting plate features a one-
sink are designed to offer various injection-molding, then precisely piece EPDM gasket on back side
options for down lighting, up arranged and sealed on the board of plate to firmly seal fixture to
lighting or a combination of both media. Optional uplight LED wall surface, forbidding entry of
up and down. FACEPLATE / DOOR: distribution features a diffuse soft moisture and particulates. Optional
One-piece die-cast aluminum glow for enhancing architectural mounting arrangements utilize a
construction. Captive, side hinged scenes or accentuating structural die-cast mounting adaptor box to ENT ENTRI
faceplate swings open via release features. LEDs: High output LEDs, allow for LED battery pack, surface
of one (1) flush mount die-cast 50,000+ hours life at >70% lumen conduit and through branch wiring. LED TRIANGLE
aluminum latch on housing side
panel. Door closure and seal is
maintenance, offered standard in
4000K (+/- 275K) CCT and nominal
Entri LED is approved for mounting
on combustible surfaces.
REVEALS
ensured through a robust and 70 CRI.
positive retention bale latch F i n i sh 1 - 2 LightBARs
which upon closing can be heard Ele c t r i c a l Housing is finished in 5-stage
Solid State LED
through distinct sound. GASKET: DRIVER: LED drivers are potted and Super TGIC polyester powder coat
One-piece molded silicone gasket heat sunk for optimal performance paint, 2.5 mil nominal thickness
mates perfectly between the door and prolonged life. Standard for superior protection against
ARCHITECTURAL WALL
and housing for repeatable seal. drivers feature electronic universal fade and wear. LightBAR cover
LUMINAIRE
Silicone wire way plug on housing voltage (120-277V/50-60Hz), greater plates are standard white and
back wall seals incoming electrical than 0.9 power factor, less than may be specified to match finish
leads to prevent moisture and 20% harmonic distortion and of luminaire housing. Standard
dust entry. LENS: Uplight lens feature ambient temperature range colors include black, bronze, grey,
is impact- resistant, 5/32" thick of +40°C (104°F) down to minimum white, dark platinum and graphite
tempered frosted glass sealed to starting temperature of metallic. RAL and custom color
housing with continuous bead -30°C (-22°F). Shipped standard matches available. Consult Outdoor
silicone gasket. Downlight lens is with Cooper Lighting proprietary Architectural Colors brochure for a
LED board integrated acrylic over- circuit module designed to complete selection.
optics, each individually sealed for withstand 10kV of transient line
IP66 rating. surge. Options to control light Warranty
HARDWARE: Stainless steel levels, energy savings and egress Entri LED features a five-year
mounting screws and latch capabilities (battery pack and limited warranty.
hardware allow access to electrical separate circuit) are available. All
components for installation and LED LightBARs and drivers are
servicing. mounted to a primary mounting
plate and are easily replaced by
use of quick disconnects for ease
of wiring. CERTIFICATION DATA
UL/cUL Listed
ISO 9001
IP66 LightBARs
DIMESIONS CONDUIT MOUNT / BATTERY BACK BOX ARRA Compliant
LM79 / LM80 Compliant
ENERGY DATA
Electronic LED Driver
>0.9 Power Factor
<20% Total Harmonic Distortion
15-3/4" 8-1/8" 120-277V/50 & 60hz, 347V/60hz,
[400mm] 7-3/4" [206mm] 480V/60hz
[196mm]
-30°C Minimum Temperature
40°C Ambient Temperature Rating
11"
[279mm] SHIPPING DATA
Approximate Net Weight:
16 lbs. (7.3 kgs.)
TEM
YS
S
S
ER
D
C
TIFIE
AVU092077
2013-02-27 17:23:26
Submitted by Illumination Systems, Inc Catalog Number: Type:
Job Name: ENT-C02-LED-E1-BL3-BZ
Campbell County Memorial Hospital Clinic
Engineer: Beaudin Ganze Denver E1
(Lakewood) Notes:
ISI13-9416
ORDERING INFORMATION
DESCRIPTION
Type
The Ovation Series is a complete family of recessed direct/indirect Catalog #
luminaires featuring pleasant modern architectural styling, computer-
designed optics and the latest energy efficient lamp and ballast tech-
Project
nology. The luminaire combines a matte white indirect reflector and
two perforated direct lamp shields to provide optimum brightness con- Date
trol. All components are located above the ceiling plane for a clean Comments
architectural appearance in the finished space. Carefully balanced
design elements combine to provide an efficient and exciting, high per- Prepared by
formance alternative to traditional general lighting. Ovation is an excel-
lent choice for a wide variety of commercial applications.
SPECIFICATION FEATURES
6"
[152mm]
23-3/4"
[603 mm]
ENERGY DATA
Input Watts:
COOPER LIGHTING
ADF020610
Submitted by Illumination Systems, Inc Catalog Number: Type:
Job Name: 2RDI-S-228T5RP-UNV-EBT1NDIM-U
Campbell County Memorial Hospital Clinic
Engineer: Beaudin Ganze Denver F1
(Lakewood) Notes:
ISI13-9416
2RDI-S
PHOTOMETRICS
2RDI-S
ORDERING INFORMATION
Number of Ballasts
1=1 Ballast
2=2 Ballasts
3=3 Ballasts
SHIPPING INFORMATION
Catalog No. Wt.
2RDI-S-228T5RP 25 lbs.
2RDI-S-428T5RP 25 lbs.
2RDI-S-254T5RP 25 lbs.
2RDI-S-454T5RP 25 lbs.
DESCRIPTION
Type
The Ovation Series is a complete family of recessed direct/indirect Catalog #
luminaires featuring pleasant modern architectural styling, computer-
designed optics and the latest energy efficient lamp and ballast tech-
Project
nology. The luminaire combines a matte white indirect reflector and
two perforated direct lamp shields to provide optimum brightness con- Date
trol. All components are located above the ceiling plane for a clean Comments
architectural appearance in the finished space. Carefully balanced
design elements combine to provide an efficient and exciting, high per- Prepared by
formance alternative to traditional general lighting. Ovation is an excel-
lent choice for a wide variety of commercial applications.
SPECIFICATION FEATURES
6"
[152mm]
ENERGY DATA
Input Watts:
23-3/4"
[603 mm] EB Ballast & STD Lamps
232 (61), 432 (122)
T2BX40 (140), T2BX50 (212)
T2BX55 (220)
MOUNTING DATA LAMP CONFIGURATIONS
ES Ballast & STD Lamps
BIAX MODEL 232 (71), 432 (142)
7/8" [22mm] K.O. (2)
6"
[152mm]
6"
STD Ballast & STD Lamps
[152mm]
18-1/16" T2BX40 (164)
[459mm]
20-1/4"
23-3/4" [498mm]
[603mm]
5-5/16" 23-3/4" Luminaire Efficacy Rating
T8 MODEL [135mm] [603mm]
7/8" [22mm] K.O. (2) LER = FL54
Catalog Number: 2RDI-S-232RP
6" 6"
[152mm] [152mm]
Yearly Cost of 1000 lumens,
3000 hrs at .08 KWH = $4.44
19-5/8"
Ballast Access 3-13/16" [498mm]
Plate 47-11/16" [97mm] 23-3/4" *Reference the lamp/ballast data in the
[1211mm] [603mm]
5-5/16" 23-3/4" Technical Section for specific lamp/ballast
[135mm] [603mm]
requirements.
2RDI-S
PHOTOMETRICS
2RDI-S
ORDERING INFORMATION
Number of Ballasts
1=1 Ballast
2=2 Ballasts
3=3 Ballasts
SHIPPING INFORMATION
Catalog No. Wt.
2RDI-S-T2BX40RP 27 lbs.
2RDI-S-232 27 lbs.
2RDI-S-432 27 lbs.
C240PUNVHP-B
APPLICATION and PERFORMANCE SPECIFICATION
p
Description: Electronic compact
p fluorescent ballast for ((2/1)) FT40W/2G11,, ((2/1)) FT40WES/2G11 (28W)
( ) and
(2/1) FT40WES/2G11 (25W)
• Line Voltage: 120Vac to 277Vac, ±10%, 50-60Hz • Programmed Rapid Start
• High Power Factor • Series Lamp Connection
Black Red
Black
White Red Reds
One Lamp White Two Lamp
Yellows
Application Blue Application
Blues
Blue
Note: For one lamp application cap both yellow leads and insulate
to 600V.
DESCRIPTION
Type
The Ovation Series is a complete family of recessed direct/indirect Catalog #
luminaires featuring pleasant modern architectural styling, computer-
designed optics and the latest energy efficient lamp and ballast tech-
Project
nology. The luminaire combines a matte white indirect reflector and
two perforated direct lamp shields to provide optimum brightness con- Date
trol. All components are located above the ceiling plane for a clean Comments
architectural appearance in the finished space. Carefully balanced
design elements combine to provide an efficient and exciting, high per- Prepared by
formance alternative to traditional general lighting. Ovation is an excel-
lent choice for a wide variety of commercial applications.
SPECIFICATION FEATURES
6"
[152mm]
23-3/4"
[603 mm]
ENERGY DATA
Input Watts:
COOPER LIGHTING
ADF020610
Submitted by Illumination Systems, Inc Catalog Number: Type:
Job Name: 2RDI-S-228T5RP-UNV-EBT1-U
Campbell County Memorial Hospital Clinic
Engineer: Beaudin Ganze Denver F3
(Lakewood) Notes:
ISI13-9416
2RDI-S
PHOTOMETRICS
2RDI-S
ORDERING INFORMATION
Number of Ballasts
1=1 Ballast
2=2 Ballasts
3=3 Ballasts
SHIPPING INFORMATION
Catalog No. Wt.
2RDI-S-228T5RP 25 lbs.
2RDI-S-428T5RP 25 lbs.
2RDI-S-254T5RP 25 lbs.
2RDI-S-454T5RP 25 lbs.
DESCRIPTION
Type
The GC Series features a 4-3/4" deep para-contoured fixture housing, Catalog #
high reflectivity and optimum lamp to lens spacing. The series pro-
duces total uniformity of light in the luminous area and is compatible
Project
with all of today’s popular ceiling systems and is available with a num-
ber of options and accessories for application versatility. Date
Comments
The specification luminaire is designed to offer maximum efficiency
and performance for today’s unique interior specifications. The GC Prepared by
Series is an excellent choice for commercial office spaces, schools, hos-
pitals or retail merchandising areas.
SPECIFICATION FEATURES
Construction Electrical* H i n g i n g / L a t ch i n g
4-3/4" deep, para-contoured hous- Ballasts are CBM/ETL Class “P” and Positive cam action spring
ing, die formed, prime cold rolled are positively secured by mounting loaded steel latches with baked
steel. Die embossed housing has full bolts. Pressure lock lampholders. white enamel finish. Safety-lock
length die formed stiffeners for UL/CUL listed.** Suitable for damp T-hinges allow hinging and
added strength. Deep “V” locations. latching either side.
ballast/wireway cover easily Frame/Shielding
Finish
removed without tools. Die formed
Multistage, iron phosphate pretreat- Die formed, heavy gauge, flat
captive lampholder bracket fully
ment ensures maximum bonding steel door with reinforced
encloses lampholder wiring permit-
and rust inhibitor. Lighting grade, mitered corners and baked
ting easy lampholder replacement.
baked white enamel finish. white enamel finish. Positive
Heavy endplates are securely
attached with interlocking tabs and
light seals. Light stabilized 2GC
screws. Four auxiliary fixture end
100% virgin acrylic prismatic 228T5
shielding. Standard #12 pattern.
suspension points provided. KOs for
Optional shielding available. 254T5
continuous row wiring. Endplates
have integral Grid-Lock feature for 428T5
safety and convenience. 454T5
4-3/4"
[121mm]
23-3/4"
[603mm]
4-3/4"
[121mm]
X=4-3/4" X 5-3/4" X
[121mm] [146mm] ENERGY DATA
23-3/4" [603mm]
3" [77mm] 4-5/8" [119mm]
Input Watts:
7-7/8" [201mm] DOOR FRAMES
48" [1217mm] EB Ballast & STD Lamps
228T5 (59), 254T5 (114),
GC GCFA GCRA
F lat, White F lat, E xtruded D eep, R egressed, 428T5 (118), 454T5 (226)
Steel White Alum inum E xtruded White Alum inum
G G G F MZ Ceiling Trim
Grid/Lay-in Concealed T Slot Grid Aluminum Flange Trim Modular Trim Type Type
LAMPS CONTAIN MERCURY. DISPOSE ACCORDING TO
Standard With Supporting With Supporting Exposed Grid G LOCAL, STATE OR FEDERAL LAWS
Swing Gates Swing Gates Concealed T G
Slot Grid G
Flange F
Concealed “T” or ”Z“ MZ
Metal Pan MZ Safe and convenient means of
disconnecting power.
(Verify compatibility/ consult
Pre Sales Technical Support.)
ADF111339
COOPER LIGHTING
Submitted by Illumination Systems, Inc Catalog Number: Type:
Job Name: 2GC-228T5A125-UNV-EBT1NDIM-U
Campbell County Memorial Hospital Clinic
Engineer: Beaudin Ganze Denver F4
(Lakewood) Notes:
ISI13-9416
ORDERING INFORMATION
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information.
SHIPPING INFORMATION
Catalog No. Wt.
2GC-228T5A 29 lbs.
2GC-254T5A 29 lbs.
2GC-428T5A 32 lbs.
2GC-454T5A 32 lbs.
DESCRIPTION
Type
The GC Series features a 4-3/4" deep para-contoured fixture housing, Catalog #
high reflectivity and optimum lamp to lens spacing. The series pro-
duces total uniformity of light in the luminous area and is compatible
Project
with all of today’s popular ceiling systems and is available with a num-
ber of options and accessories for application versatility. Date
Comments
The specification luminaire is designed to offer maximum efficiency
and performance for today’s unique interior specifications. The GC Prepared by
Series is an excellent choice for commercial office spaces, schools, hos-
pitals or retail merchandising areas.
SPECIFICATION FEATURES
Construction Electrical* H i n g i n g / L a t ch i n g
4-3/4" deep, para-contoured hous- Ballasts are CBM/ETL Class “P” and Positive cam action spring
ing, die formed, prime cold rolled are positively secured by mounting loaded steel latches with baked
steel. Die embossed housing has full bolts. Pressure lock lampholders. white enamel finish. Safety-lock
length die formed stiffeners for UL/CUL listed.** Suitable for damp T-hinges allow hinging and
added strength. Deep “V” locations. latching either side.
ballast/wireway cover easily Frame/Shielding
Finish
removed without tools. Die formed
Multistage, iron phosphate pretreat- Die formed, heavy gauge, flat
captive lampholder bracket fully
ment ensures maximum bonding steel door with reinforced
encloses lampholder wiring permit-
and rust inhibitor. Lighting grade, mitered corners and baked
ting easy lampholder replacement.
baked white enamel finish. white enamel finish. Positive
Heavy endplates are securely
attached with interlocking tabs and
light seals. Light stabilized 2GC
screws. Four auxiliary fixture end
100% virgin acrylic prismatic 228T5
shielding. Standard #12 pattern.
suspension points provided. KOs for
Optional shielding available. 254T5
continuous row wiring. Endplates
have integral Grid-Lock feature for 428T5
safety and convenience. 454T5
4-3/4"
[121mm]
23-3/4"
[603mm]
4-3/4"
[121mm]
X=4-3/4" X 5-3/4" X
[121mm] [146mm] ENERGY DATA
23-3/4" [603mm]
3" [77mm] 4-5/8" [119mm]
Input Watts:
7-7/8" [201mm] DOOR FRAMES
48" [1217mm] EB Ballast & STD Lamps
228T5 (59), 254T5 (114),
GC GCFA GCRA
F lat, White F lat, E xtruded D eep, R egressed, 428T5 (118), 454T5 (226)
Steel White Alum inum E xtruded White Alum inum
G G G F MZ Ceiling Trim
Grid/Lay-in Concealed T Slot Grid Aluminum Flange Trim Modular Trim Type Type
LAMPS CONTAIN MERCURY. DISPOSE ACCORDING TO
Standard With Supporting With Supporting Exposed Grid G LOCAL, STATE OR FEDERAL LAWS
Swing Gates Swing Gates Concealed T G
Slot Grid G
Flange F
Concealed “T” or ”Z“ MZ
Metal Pan MZ Safe and convenient means of
disconnecting power.
(Verify compatibility/ consult
Pre Sales Technical Support.)
ADF111339
COOPER LIGHTING
Submitted by Illumination Systems, Inc Catalog Number: Type:
Job Name: 2GC-228T5A125-UNV-EBT1-U
Campbell County Memorial Hospital Clinic
Engineer: Beaudin Ganze Denver F5
(Lakewood) Notes:
ISI13-9416
ORDERING INFORMATION
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting Representative for availability and ordering information.
SHIPPING INFORMATION
Catalog No. Wt.
2GC-228T5A 29 lbs.
2GC-254T5A 29 lbs.
2GC-428T5A 32 lbs.
2GC-454T5A 32 lbs.
D ES CR IPTIO N FAIL-SAFE
Fail-Safe's development of the asymmetric/symmetric ORM represents Type
the latest technology in precise control of light to the surgical task and to Catalog #
the surrounding area, and allows multi-level lighting without changing
the character of the lighting distribution. The ORM's high efficiency and Project
precise lighting distribution delivers high illumination to the surgical task
area. Quality and value are maintained to provide the best performance Date
solution for your design needs. Comments
Prepared by
Wet Location
NOTE: “MIL” box required for MILSTD461F compliance, adds 2" to overall fixture IP65 rated
height, all sizes and mounting configurations. See Options for “MIL” specification.
23-11/16" 11-11/16"
[602mm] [297mm]
4-3/4" 4-3/4"
[120mm] [120mm]
2x2 ceiling cut-out dimensions: 24" (W) x 24-5/16" (L) 1x4 ceiling cut-out
2x4 ceiling cut-out dimensions: 24" (W) x 48-5/16" (L) dimensions: 12" (W) x 48-5/16" (L)
23-11/16" 11-11/16"
[602mm] [297mm]
4-1/16" 4-1/16"
[103mm] [103mm]
24"
[610mm] 12"
[305mm]
4-1/16" 4-11/16"
[119mm] [119mm]
ORM
ORDERING INFORMATION
S A M P L E N U M B E R : O R M - G - 2 4 - 6 3 2 - U N V - A S Y / S Y M / R F I - E B 8 3-ALXP-SHN-CPH
ORM
ORM = Operating 120=120V Electronic Ballast
Blank=20 ga. Cold Rolled
Room/ 277=277V EB81=(1) Ballast, Instant Start, T8 lamps
347=347V Steel, white
Surgical EB82=(2) Ballasts, Instant Start, T8 lamps powder coat finish
UNV =120V-277V EB83 =(3) Ballasts, Instant Start, T8 lamps SHP=Stainless Steel Housing,
ER81=(1) Ballast, Rapid Start, T8 lamps white powder coat finish
ASY/SYM=Asymmetric/Symmetric Lens,
G=Grid (1” & 1-1/2” T-Bar) ER82=(2) Ballasts, Rapid Start, T8 lamps SHN=Stainless Steel Housing,
with 0.125” Clear Acrylic Lens Underlay ER83 =(3) Ballasts, Rapid Start, T8 lamps
F=Flange (Swing-out ASY/SYM/RFI=Asymmetric/Symmetric Brushed finish
EB51=(1) Ballast, T5 lamps ALH=Aluminum Housing, white
brackets standard) Lens with RFI grid, with 0.125” Clear
EB52=(2) Ballasts, T5 lamps powder coat finish
S =Surface 1, 6 Acrylic Lens Underlay
EB53=(3) Ballasts, T5 lamps
A125 =Pattern 12 acrylic, 0.125” thick, EBX1=(1) Ballast, BX lamps
inverted EBX2=(2) Ballasts, BX lamps EL4 =EM Pack, T8, BX 4
KSH25= Bat Wing Distribution, with
For dimming ballast, specify quantity and EL5 =EM Pack, T5, T5HO 4
24 =24” Wide 0.125” Clear Acrylic Lens Underlay
catalog number. GLR =Fuse and Holder
12 =12” Wide 89BC= 0.125” thick KSH19 RFI -
1/RIF=1 Radio Interference Filter 5, 9
Symmetrical, with 0.125” Clear
Acrylic Lens Underlay 2/RIF=2 Radio Interference Filters 5, 9
Blank=Die-formed, cold rolled steel, white powder
IK12=Pattern 12 Acrylic, 0.110" thick coat finish, flat inset door for recessed unit. 3/RIF=3 Radio Interference Filters 5, 9
2x2 10 2x4 Overlapping, steel, white powder coat CPH=Continuous Piano Hinge 2
for surface. 1, 2 SW=Sealed Wireway
617 =(6) 17W T8 Lamps 632=(6) 32W T8 Lamps ALP=Die-formed Aluminum, white powder TAD =Top Access Door
614 =(6) 14W T5 Lamps 628T8=(6) 28W T8 Lamps coat finish, flat inset door 1, 2 (door accessible from plenum only) 7
624 =(6) 24W T5HO Lamps 628=(6) 28W T5 Lamps SSP=Stainless Steel, white powder coat finish.
TED =Top Entry Door ( door
417 =(4) 17W T8 Lamps 654=(6) 54W T5HO Lamps flat inset door 1, 2
accessible from room side) 7
SSN=Stainless Steel Brushed finish,
414 =(4) 14W T5 Lamps 432=(4) 32W T8 Lamps EQ =Earthquake Clips
flat inset door 1, 2
424=(4) 24W T5HO Lamps 428T8=(4) 28W T8 Lamps ALX=Extruded Alumium, Clear Anodized GEN1 =Interim lighting for generator
317 =(3) 17W T8 Lamps 428=(4) 28W T5 Lamps finish, flat inset door 1, 2, 3 back-up systems; 1-lamp operation 12
314=(3) 14W T5 Lamps ALXP=Extruded Aluminum, white powder GEN3 =Interim lighting for generator
454=(4) 54W T5HO Lamps
coat finish, flat inset door 1, 2 back-up systems; 2- or 3-lamp
324 =(3) 24W T5HO Lamps
332=(3) 32W T8 Lamps operation, instant start at ballast only 12
217=(2) 17W T8 Lamps
328T8=(3) 28W T8 Lamps AM = Anti-microbial finish (all painted
240 BX =(2) 40W Biaxial Lamps
328=(3) 28W T8 Lamps parts)
250 BX =(2) 50W Biaxial Lamps
328=(3) 28W T5 Lamps MIL1 = Compliance to MILSTD461F
255BX=(2) 55W Biaxial Lamps for standard ballasts and 8, 11
354=(3) 54W T5HO Lamps
340 BX =(3) 40W Biaxial Lamps dimming ballasts, single circuit.
232=(2) 32W T8 Lamps
350 BX =(3) 50W Biaxial Lamps MIL2 = Compliance to MILSTD461F
1x4
355BX =(3) 55W Biaxial Lamps for standard ballasts and
332=(3) 32W T8 Lamps dimming ballasts, 2 circuits. 8, 11
440BX=(4) 40W Biaxial Lamps
328T8 =(3) 28W T8 Lamps
450BX=(4) 50W Biaxial Lamps 328=(3) 28W T5 Lamps MIL3 = Compliance to MILSTD461F
for standard ballasts and
455BX=(4) 55W Biaxial Lamps 354=(3) 54W T5HO Lamps dimming ballasts, 3 circuits. 8, 11
232=(2) 32W T8 Lamps
228T8=(2) 28W T8 Lamps
228=(2) 28W T5 Lamps
228=(2) 28W T8 Lamps
254=(2) 54W T5HO Lamps
NOTES:
1 Surface-mount door is overlapping, steel, with white powder coat finish. Not available with ALXP, ALX, SSP, SSN. Recessed door is flat inset standard.
2 CPH available with ALXP or ALX options only.
3 ALX door option not IP65 rated.
4 Specify voltage.
5 For (1) RIF, specify as 1/RIF, for (2) RIFs, specify as 2/RIF, (3) RIFs, specify as 3/RIF.
6 MIL spec not available for surface mount.
7 36” opening for MIL spec.
8 Wiring box placed on fixture housing, adding 2” to fixture height.
9 RIF does not ensure MILSTD461F rating. MIL1, MIL2, MIL3 ensures MILSTD461F rating.
10 Multiple ballasts (standard and EM) may require ballast(s) to be mounted in a back-box on the fixture housing, which will increase fixture height. Consult factory for details.
11 For MILSTD461F compliance, the ASY/SYM/RFI or 89BC lens is required, along with either MIL1, MIL2 or MIL3 option. Radio Interference Filters (RIF) are not required.
12 GEN1 and GEN3 not available with T5 lamps. Consult factory for T8 AC ballast compatibility.
P H O T O M E TR I C S
L O W - V O L T A G E H E A D S
Tilt Head
DESCRIPTION
Flexible minimalist head with multiple accessory options;
rotates 360°, pivots 90°. Low-voltage, MR16 lamp of up to 50
watts (not included).
INSTALLATION
Socket terminates with FreeJack male connector, which may be
installed into a system connector. Elements ordered with a
system prefix include a connector for that system.
WEIGHT
0.7lb / 0.32kg ±
ORDERING INFORMATION
©2013 Tech Lighting, L.L.C. All Rights Reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C.
Tech Lighting reserves the right to change specifications for product improvements without notification.
Submitted by Illumination Systems, Inc Catalog Number: Type:
Job Name: 700FJTLT12S
Campbell County Memorial Hospital Clinic
Engineer: Beaudin Ganze Denver P2
(Lakewood) Notes:
ISI13-9416
Submitted by Illumination Systems, Inc Catalog Number: Type:
Job Name: 700LICOFR
Campbell County Memorial Hospital Clinic
Engineer: Beaudin Ganze Denver P2
(Lakewood) Notes:
ISI13-9416
{ ~ ~ { ~ > > ~
'!*+;; *<
# $ +
= >
?
^
` {| `
} |
} |
{
~>
>
} > >
$
>
}
>
$$
Submitted by Illumination Systems, Inc Catalog Number: Type:
Job Name: 700LICOFR
Campbell County Memorial Hospital Clinic
Engineer: Beaudin Ganze Denver P2
(Lakewood) Notes:
ISI13-9416
Submitted by Illumination Systems, Inc Catalog Number: Type:
Job Name: 700FJ4RFS
Campbell County Memorial Hospital Clinic
Engineer: Beaudin Ganze Denver P2
(Lakewood) Notes:
ISI13-9416
F R E E J A C K
INSTALLATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagonal electrical box (not included).
Transformer (included) fits in junction box. For ceiling or wall. If
wall mounting, head should be no longer than 6".
OTHER
For use with any 12 or 24 volt halogen FreeJack pendant or
head (sold separately).
WEIGHT
0.8lb / 0.36kg ±
ORDERING INFORMATION
©2013 Tech Lighting, L.L.C. All Rights Reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C.
Tech Lighting reserves the right to change specifications for product improvements without notification.
Submitted by Illumination Systems, Inc Catalog Number: Type:
Job Name: 700FJ4RFS
Campbell County Memorial Hospital Clinic
Engineer: Beaudin Ganze Denver P2
(Lakewood) Notes:
ISI13-9416
Submitted by Illumination Systems, Inc Catalog Number: Type:
Job Name: CD6S213E/6CS226W0LI/DTC6RO/
Campbell County Memorial Hospital Clinic
Engineer: Beaudin Ganze Denver
HB26 R1
(Lakewood) Notes:
ISI13-9416
PORTFOLIO
®
DESCRIPTION
High efficiency, low brightness 6" aperture shallow housing for use Catalog # Type
with 18 or 26W double twin tube compact fluorescent lamps. Standard
features include low iridescent finish on all reflector colors and venting to
ensure maximum lamp life and lumen output. Optics offer unparalleled Project
performance with glare free lighting and smooth beam. Lensed and
crossblade reflectors are interchangeable within the same housing. Comments Date
Prepared By
S P E C I F I C AT I O N F E AT U R E S
5-1/8"
[130mm]
ENERGY DATA
Power Factor: > 0.99 THD: < 10%
Min. Starting Temperature: 0º F (-18º C)
Sound Rating: Class A standards
(2) 13W DTT Ballast
120V Input Watts: 31 Line Amps: 0.26
277V Input Watts: 31 Line Amps: 0.12
(2) 18W DTT Ballast
120V Input Watts: 37 Line Amps: 0.32
To p V i e w
17-23/32" [450mm]
11-3/4"
[299mm]
14-3/16"
[360mm]
13-23/32" [348mm]
(with EM option)
PORTFOLIO
®
O R D E R I N G I N F O R M AT I O N
Notes: 1 Order trim with polymer trim ring. 2 Not available with
Chicago Plenum. 3 Not available with 13W.
(Consult specification sheet for ordering information and options).
P H OTO M E T R I C S
PORTFOLIO
®
DESCRIPTION
High efficiency, low brightness 6" aperture shallow housing for use Catalog # Type
with 18 or 26W double twin tube compact fluorescent lamps. Standard
features include low iridescent finish on all reflector colors and venting to
ensure maximum lamp life and lumen output. Optics offer unparalleled Project
performance with glare free lighting and smooth beam. Lensed and
crossblade reflectors are interchangeable within the same housing. Comments Date
Prepared By
S P E C I F I C AT I O N F E AT U R E S
5-1/8"
[130mm]
ENERGY DATA
Power Factor: > 0.99 THD: < 10%
Min. Starting Temperature: 0º F (-18º C)
Sound Rating: Class A standards
(2) 13W DTT Ballast
120V Input Watts: 31 Line Amps: 0.26
277V Input Watts: 31 Line Amps: 0.12
(2) 18W DTT Ballast
120V Input Watts: 37 Line Amps: 0.32
To p V i e w
17-23/32" [450mm]
11-3/4"
[299mm]
14-3/16"
[360mm]
13-23/32" [348mm]
(with EM option)
PORTFOLIO
®
O R D E R I N G I N F O R M AT I O N
Notes: 1 Order trim with polymer trim ring. 2 Not available with
Chicago Plenum. 3 Not available with 13W.
(Consult specification sheet for ordering information and options).
P H OTO M E T R I C S
Prepared by
SPECIFICATION FEATURES
A ...Housing D ...Lamp
Housing and plaster frame: 18 gauge CRS 12V MR16 50 or 75 watts max. (not
with flat black powder coated internal included) GU5.3 bi-pin lamp socket pre-
finish. Adjustable 1.5” to accommodate wired with 18AWG SF1 leads.
various ceiling thickness.
E ...Mounting
B ...System Protection: Adjustable Hanger Bars.
Thermal protection provided to guard
against overheating and misuse of Ceiling Cut-Out: 3.75”
insulation over and around fixture.
C ...Electrical
Low voltage electronic or magnetic
transformer . 120V or 277V input, 11.5V
output. Junction box is U.L. listed for
through branch wiring for 5 #12 90ºC
supply wire in/out or 60º supply wires for
end of run.
10.50”
MICROGEM
[267mm]
C500
New Construction
Ceiling Housing for Round
Cut-Out 5.13”
3.75”dia. [130mm] Trim
[95mm]
Compatible with the following lamps:
5.50”
[140mm] 3.50”
[89mm]
3.75”dia.
[95mm]
ORDERING INFORMATION
C500
D ES CR IPTIO N FAIL-SAFE
The Medical Task Undercabinet Series provides effective task lighting Type
solutions for any application. This solid front specification grade Catalog #
fluorescent undercabinet incorporates the latest energy efficient
technology with fluorescent lamps and electronic ballasts to improve the Project
appearance and productivity of the illuminated environment. The unique,
low-profile, solid-front design conforms to various applications such as Date
nursing stations, modular offices, laboratories, computer work centers Comments
and practically any under-counter installation where an inconspicuous
light source is required to provide high light levels below the luminaire. Prepared by
I nt er n a l Re f le c t o r F in ish L a m ps
Standard white painted housing High gloss, electrostatically By others.
reflector for improved efficiency. applied, white powder coat finish,
Front Reflector Standard white average minimum reflectance 92%. El e c tri c a l
painted solid front housing Suitable for through wiring when
reflector improves efficiency and B a lla st installed in continuous rows.
minimizes glare. Electronic Class P CBM/ETL.
Minimal fixture depth causes L a be l s
Hous in g limited ballast choices. Consult UL/cUL listed for damp locations.
Available in 1.1" deep heavy factory for compatibility.
20 gauge seam welded CRS
construction with no exposed Lens
fasteners. Keyhole mounting slots Choice of clear Pattern 12 prismatic
are located on top of housing for acrylic or polycarbonate diffuser,
ease of installation. Knock-outs are KSH25 linear ribbed acrylic MSS
provided on ends for continuous asymmetric.
row mounting. T5
Fluorescent
Undercabinet
Solid Front
Housing
Length Dimension A Lamp
22.6" [574 mm] 17.8" [ 452 mm] 14WT5
34.4" [875 mm] 29.6" [ 753 mm] 21WT5
46.3" [1175 mm] 41.5" [ 1053 mm] 28WT5
58.3" [1480 mm] 53.5" [ 1358 mm] 35WT5
1-1/8"
[28mm]
2-3/16"
[56mm]
5"
[127mm]
M O U N TIN G
1-1/2" 1-1/2"
[38mm] [38mm]
5/8 X 37/64 D.D K.O. (8)
13/16"
[20mm]
3-3/16"
[81mm]
Housing Length
1-1/2"
1-1/2" [38mm] 13/16"
[38mm] [20mm]
5/8"
[15mm]
MSS
ORDERING INFORMATION
MSS
MSS =Undercabinet T5 Fluorescents 120 =120V GLR =GLR Fuseholder with Fuse
Solid Front
Pre-Heat 6CP = 6ft. Cord with
14 =(1) 14W T5, 2' IK12 =Pattern 12 Acrylic Grounded Plug
KSH25 =Linear Ribbed Acrylic, 0.115" thick GCO=Grounded Convenience
21 =(1) 21W T5, 3'
IP12 =Pattern 12 Polycarbonate Outlet (White) 2
28 =(1) 28W T5, 4'
RSW=Rocker Switch (White) 2
35 =(1) 35W T5, 5'
AM=Anti-Microbial Finish (all
EB51 =(1) Electronic Ballast for use with T5 Lamp painted parts)
Notes:
1
For specific electronic ballast, specify brand and catalog number. Ballast choices limited due to low-profile design.
2
GCO and RSW are mounted standard on the right side of the luminaire.
DESCRIPTION
Type
The CR Series corridor wraparound features economy and energy effi- Catalog #
cient performance. CR luminaires utilizes a low brightness, extruded
acrylic refractor with a heavy gauge end plate with embossed light seal
Project
for dependable performance and good looks.
Date
The CRP Series is an ideal complimentary wraparound luminaire for Comments
diverse applications requiring economical general lighting.
Prepared by
SPECIFICATION FEATURES
Corridor Lite
6-1/8" [156mm]
MOUNTING DATA
4-1/4"
[108mm]
ENERGY DATA
1-1/8" 48" [1220mm]
[29mm] 81" [2058mm] Input Watts:
89-1/2" [2274mm] HB Ballast & STD Lamps
91-7/8" [2334mm] 114T5 (23)
96" [2439mm] 128T5 (37)
15/64" [6mm] K.O. (4) 15/64" K.O. (4)
214T5 (34)
4' 11/16" x 1" K.O. (2) Ceiling Stand-Off Embossments 228T5 (60)
2'
7/8" [23mm] K.O. (4) Ground Screw Bump
Ceiling Stand-Off 1-3/4" x 3-1/4" K.O. (1) 3/16" 11/16" x 1" K.O. (1)
3/16" [5mm] Embossments Ground Screw Bump [5mm] 7/8" K.O. (1) Luminaire Efficacy Rating
4-1/4"
LER = FW-
4-1/4"
[108mm] [108mm] Catalog Number:
1 LAMP X 2 LAMP X Easily Removed. LAMPS CONTAIN MERCURY. DISPOSE ACCORDING TO LOCAL,
Hinges Either Side STATE OR FEDERAL LAWS
4-5/8" [118mm] 4-5/8" [118mm] (Not Recommended
For Sloped Ceiling
X=4-1/4 6-1/8" X=4-1/4 Y
[108mm] [156mm] [108mm]
Applications.)
6-1/8"
Y=2-5/8" [156mm] Safe and convenient means of
[67mm] disconnecting power.
CR
PHOTOMETRICS
Effective floor cavity reflectance 20% Effective floor cavity reflectance 20%
rc 80% 70% 50% 30% 10% 0% rc 80% 70% 50% 30% 10% 0%
rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0 rw 70 50 30 10 70 50 30 10 50 30 10 50 30 10 50 30 10 0
RCR RCR
0 100 100 100 100 95 95 95 95 86 86 86 78 78 78 70 70 70 67 0 109 109 109 109 104 104 104 104 94 94 94 84 84 84 76 76 76 72
1 90 85 81 78 85 81 78 75 74 71 68 67 65 63 60 59 57 54 1 98 93 88 84 93 88 84 80 79 76 73 72 69 67 64 62 60 57
2 82 75 69 64 78 71 66 61 65 60 57 59 55 52 53 50 48 45 2 89 81 74 68 84 77 71 66 69 65 60 63 59 55 56 53 51 47
3 75 66 59 54 71 63 57 52 58 52 48 52 48 45 48 44 42 39 3 81 71 63 57 77 68 61 55 61 56 51 55 51 47 50 46 43 40
4 69 59 51 46 65 56 50 44 51 46 42 47 42 39 43 39 36 34 4 75 63 55 48 70 60 53 47 55 48 44 50 44 40 45 41 37 34
5 63 52 45 39 60 50 43 38 46 40 36 42 37 33 38 34 31 29 5 69 56 48 42 65 54 46 40 49 43 38 45 39 35 40 36 33 30
6 58 47 39 34 55 45 38 33 41 36 31 38 33 29 35 31 27 25 6 63 51 42 36 60 49 41 35 44 38 33 40 35 31 37 32 29 26
7 54 42 35 30 51 41 34 29 37 32 27 34 29 26 32 27 24 22 7 59 46 38 32 56 44 37 31 40 34 29 37 31 27 34 29 26 23
8 50 38 31 26 47 37 30 25 34 28 24 31 26 22 28 24 21 19 8 55 42 34 29 52 40 33 28 37 31 26 34 28 25 31 26 23 21
9 46 34 27 22 43 33 26 22 30 25 21 28 23 19 26 21 18 17 9 51 38 31 26 48 37 30 25 34 28 23 31 26 22 29 24 21 19
10 43 31 24 20 40 30 24 19 28 22 18 26 21 17 23 19 16 15 10 48 35 28 23 45 34 27 22 31 25 21 29 24 20 27 22 19 17
Zonal Lumen Summary Typical VCP Percentages Zonal Lumen Summary Luminance Data
Zone Lumens %Lamp %Fixture Height Along Height Across Zone Lumens %Lamp %Fixture Average Average Average
Angle 0-Deg 45-Deg 90-Deg
0-30 1032 18.1 20.6 Room Size (Ft.) 8.5’ 10.0’ 8.5’ 10.0’ 0-30 600 19.4 20.0 in Deg cd/sm cd/sm cd/sm
0-40 1707 29.9 34.1 20 x 20 62 67 57 65 0-40 1017 32.8 34.0 45 3265 3749 3607
0-60 2819 49.5 56.3 30 x 30 55 59 44 53 0-60 1663 53.6 55.5 55 2343 2867 2802
0-90 3807 66.8 76.0 30 x 60 48 51 28 34 0-90 2226 71.8 74.4 65 1596 2793 2993
90-180 1202 21.1 24.0 60 x 30 54 58 49 55 90-180 768 24.8 25.5 75 1507 3238 5050
0-180 5009 87.9 100.0 60 x 60 46 49 30 36 0-180 2994 96.6 100.0 85 1330 7740 23281
ORDERING INFORMATION
D ES CR IPTIO N FAIL-SAFE
The Medical Task Undercabinet Series provides effective task lighting Type
solutions for any application. This solid front specification grade Catalog #
fluorescent undercabinet incorporates the latest energy efficient
technology with fluorescent lamps and electronic ballasts to improve the Project
appearance and productivity of the illuminated environment. The unique,
low-profile, solid-front design conforms to various applications such as Date
nursing stations, modular offices, laboratories, computer work centers Comments
and practically any under-counter installation where an inconspicuous
light source is required to provide high light levels below the luminaire. Prepared by
I nt er n a l Re f le c t o r F in ish L a m ps
Standard white painted housing High gloss, electrostatically By others.
reflector for improved efficiency. applied, white powder coat finish,
Front Reflector Standard white average minimum reflectance 92%. El e c tri c a l
painted solid front housing Suitable for through wiring when
reflector improves efficiency and B a lla st installed in continuous rows.
minimizes glare. Electronic Class P CBM/ETL.
Minimal fixture depth causes L a be l s
Hous in g limited ballast choices. Consult UL/cUL listed for damp locations.
Available in 1.1" deep heavy factory for compatibility.
20 gauge seam welded CRS
construction with no exposed Lens
fasteners. Keyhole mounting slots Choice of clear Pattern 12 prismatic
are located on top of housing for acrylic or polycarbonate diffuser,
ease of installation. Knock-outs are KSH25 linear ribbed acrylic MSS
provided on ends for continuous asymmetric.
row mounting. T5
Fluorescent
Undercabinet
Solid Front
Housing
Length Dimension A Lamp
22.6" [574 mm] 17.8" [ 452 mm] 14WT5
34.4" [875 mm] 29.6" [ 753 mm] 21WT5
46.3" [1175 mm] 41.5" [ 1053 mm] 28WT5
58.3" [1480 mm] 53.5" [ 1358 mm] 35WT5
1-1/8"
[28mm]
2-3/16"
[56mm]
5"
[127mm]
M O U N TIN G
1-1/2" 1-1/2"
[38mm] [38mm]
5/8 X 37/64 D.D K.O. (8)
13/16"
[20mm]
3-3/16"
[81mm]
Housing Length
1-1/2"
1-1/2" [38mm] 13/16"
[38mm] [20mm]
5/8"
[15mm]
MSS
ORDERING INFORMATION
MSS
MSS =Undercabinet T5 Fluorescents 120 =120V GLR =GLR Fuseholder with Fuse
Solid Front
Pre-Heat 6CP = 6ft. Cord with
14 =(1) 14W T5, 2' IK12 =Pattern 12 Acrylic Grounded Plug
KSH25 =Linear Ribbed Acrylic, 0.115" thick GCO=Grounded Convenience
21 =(1) 21W T5, 3'
IP12 =Pattern 12 Polycarbonate Outlet (White) 2
28 =(1) 28W T5, 4'
RSW=Rocker Switch (White) 2
35 =(1) 35W T5, 5'
AM=Anti-Microbial Finish (all
EB51 =(1) Electronic Ballast for use with T5 Lamp painted parts)
Notes:
1
For specific electronic ballast, specify brand and catalog number. Ballast choices limited due to low-profile design.
2
GCO and RSW are mounted standard on the right side of the luminaire.
Cons t r uc t i o n E l ec t r i ca l * F i n i sh
The Perf Arch optical assembly Ballasts are CBM/ETL Class “P” and The optical assembly is painted
features a perforated steel are positively secured by mounting after fabrication; a multistage
downlight lamp shield that bolts. Pressure lock lampholders. cleaning cycle, iron phosphate
incorporates an acrylic overlay UL/CUL listed. Suitable for damp coating with rust inhibitor precedes
lens. The endplate is constructed locations. an electrostatically applied baked
of heavy gauge painted steel. matte white polyester powder
The mounting brackets for the enamel finish.
optical assembly are made of
slender tubular steel rods. The Mo u n ti n g
lighting element is die formed Perf Arch can be surface, stem, or
code gauge prime cold rolled aircraft cable mounted.
steel. Conveniently located KOs for
ease of installation. Lampholder
PERF ARCH
mounting brackets easily installed 132
with snap-in action. Channel/
wireway cover secured with 232
5-3/8"
quarter-turn fasteners.
[137mm]
Architectural Striplight
9-3/4"
[248mm]
43-3/4" [1112mm]
X=1-5/8" X
[42mm] 48" [1220mm]
9-3/4"
[248mm]
C O N TIN U O U S R O W MO U N TIN G
ENERGY DATA
X Input Watts:
Y EB Ballast & STD Lamps
Z 132 (30)
232 (61)
BSX-PA
P H O T O M E TR I C S
ORDERING INFORMATION
Date
Comments
Prepared by
S P E C I F I C AT I O N F E AT U R E S
EUR/EUS
SERIES
E D G E - L I T U N I V E R SA L E X I T S
ORDERING INFORMATION AC O N LY
S E L F P OW E R E D
S I N G L E O R D O U B L E FAC E
EMERGENCY
T E C H N I C A L DATA
DIMENSIONS
*17 1/2"
*15" 1.75" 4"
14 1/4"
3"
13" 4" 1.5"
1.5"
1 1/2"
3 3/8" 3 3/8"
10 3/4"
*13"
8" *10"
13" 13"
Surface Recessed
EUS Series EUR Series
Date
Comments
Prepared by
S P E C I F I C AT I O N F E AT U R E S
EUR/EUS
SERIES
E D G E - L I T U N I V E R SA L E X I T S
ORDERING INFORMATION AC O N LY
S E L F P OW E R E D
S I N G L E O R D O U B L E FAC E
EMERGENCY
T E C H N I C A L DATA
DIMENSIONS
*17 1/2"
*15" 1.75" 4"
14 1/4"
3"
13" 4" 1.5"
1.5"
1 1/2"
3 3/8" 3 3/8"
10 3/4"
*13"
8" *10"
13" 13"
Surface Recessed
EUS Series EUR Series
DE SCRIPTION
INVUE ®
Entri LED features a classic and stylish design with the added benefits Type
of solid state lighting technology, offering outstanding uniformity and Catalog #
energy savings. Using Cooper Lighting’s proprietary LED LightBAR™
technology and AccuLED optical systems, Entri LED offers designers vast Project
versatility in system design, function and performance. Use Entri LED
for wall mount architectural lighting applications and egress lighting Date
Comments
requirements. UL/cUL listed for use in wet locations.
Prepared by
SP E CIFICATION FEATURES
C o n s t r uc t ion O pt ic s Mounting
HOUSING: Heavy wall, one piece DISTRIBUTION: Primary JUNCTION BOX: Standard with
die-cast aluminum construction downlight distribution offers a zinc plated quick-mount junction
for precise tolerance control and choice of six (6) patented, high box plate that mounts directly to
repeatability in manufacturing. efficiency AccuLED Optics™, that 4" J-Box. LightBARs mount facing
Integral extruded aluminum heat maximize light collection and downward. Fixture slides over
sink provides superior thermal directional distribution onto the mounting plate and is secured with
heat transfer in +40°C ambient application region. Each optical two (2) stainless steel fasteners.
environments. Housing and heat lens is precision manufactured via Mounting plate features a one-
sink are designed to offer various injection-molding, then precisely piece EPDM gasket on back side
options for down lighting, up arranged and sealed on the board of plate to firmly seal fixture to
lighting or a combination of both media. Optional uplight LED wall surface, forbidding entry of
up and down. FACEPLATE / DOOR: distribution features a diffuse soft moisture and particulates. Optional
One-piece die-cast aluminum glow for enhancing architectural mounting arrangements utilize a
construction. Captive, side hinged scenes or accentuating structural die-cast mounting adaptor box to ENT ENTRI
faceplate swings open via release features. LEDs: High output LEDs, allow for LED battery pack, surface
of one (1) flush mount die-cast 50,000+ hours life at >70% lumen conduit and through branch wiring. LED TRIANGLE
aluminum latch on housing side
panel. Door closure and seal is
maintenance, offered standard in
4000K (+/- 275K) CCT and nominal
Entri LED is approved for mounting
on combustible surfaces.
REVEALS
ensured through a robust and 70 CRI.
positive retention bale latch F i n i sh 1 - 2 LightBARs
which upon closing can be heard Ele c t r i c a l Housing is finished in 5-stage
Solid State LED
through distinct sound. GASKET: DRIVER: LED drivers are potted and Super TGIC polyester powder coat
One-piece molded silicone gasket heat sunk for optimal performance paint, 2.5 mil nominal thickness
mates perfectly between the door and prolonged life. Standard for superior protection against
ARCHITECTURAL WALL
and housing for repeatable seal. drivers feature electronic universal fade and wear. LightBAR cover
LUMINAIRE
Silicone wire way plug on housing voltage (120-277V/50-60Hz), greater plates are standard white and
back wall seals incoming electrical than 0.9 power factor, less than may be specified to match finish
leads to prevent moisture and 20% harmonic distortion and of luminaire housing. Standard
dust entry. LENS: Uplight lens feature ambient temperature range colors include black, bronze, grey,
is impact- resistant, 5/32" thick of +40°C (104°F) down to minimum white, dark platinum and graphite
tempered frosted glass sealed to starting temperature of metallic. RAL and custom color
housing with continuous bead -30°C (-22°F). Shipped standard matches available. Consult Outdoor
silicone gasket. Downlight lens is with Cooper Lighting proprietary Architectural Colors brochure for a
LED board integrated acrylic over- circuit module designed to complete selection.
optics, each individually sealed for withstand 10kV of transient line
IP66 rating. surge. Options to control light Warranty
HARDWARE: Stainless steel levels, energy savings and egress Entri LED features a five-year
mounting screws and latch capabilities (battery pack and limited warranty.
hardware allow access to electrical separate circuit) are available. All
components for installation and LED LightBARs and drivers are
servicing. mounted to a primary mounting
plate and are easily replaced by
use of quick disconnects for ease
of wiring. CERTIFICATION DATA
UL/cUL Listed
ISO 9001
IP66 LightBARs
DIMESIONS CONDUIT MOUNT / BATTERY BACK BOX ARRA Compliant
LM79 / LM80 Compliant
ENERGY DATA
Electronic LED Driver
>0.9 Power Factor
<20% Total Harmonic Distortion
15-3/4" 8-1/8" 120-277V/50 & 60hz, 347V/60hz,
[400mm] 7-3/4" [206mm] 480V/60hz
[196mm]
-30°C Minimum Temperature
40°C Ambient Temperature Rating
11"
[279mm] SHIPPING DATA
Approximate Net Weight:
16 lbs. (7.3 kgs.)
TEM
YS
S
S
ER
D
C
TIFIE
AVU092077
2013-02-27 17:23:26
Submitted by Illumination Systems, Inc Catalog Number: Type:
Job Name: ENT-C02-LED-E1-BL3-BK-TP
Campbell County Memorial Hospital Clinic
Engineer: Beaudin Ganze Denver X3
(Lakewood) Notes:
ISI13-9416
ORDERING INFORMATION
Challenge: Solution: A simple, sophisticated solution that complements your existing and future needs
Systems go out Responder 5 can meet your needs, today and tomorrow. The system is designed to fit
of date so quickly existing systems, yet adapt as needs change or demand grows; its features and functions
expand to address future needs and requirements. Because the system is scalable, it’s the
right solution for a unit, a single facility, or an entire hospital network.
59
60 58
57
56
5
55
52
50
47
45
41
40
39
40 38
37
36
30 28
24
22
21
20
19
20 18
10
1 TRUE VOIP INTEGRATION. 2 ELIMINATING THE PAPER TRAIL. 3 AUDIO IN THE BATH STATION. 4 A PROVEN, RELIABLE SYSTEMS 5 A SIMPLE, SOPHISTICATED
INTEGRATOR. SOLUTION.
Let Responder 5 work for you
Components
Patient Room Patient Stations Special Function
Components • Multiple call-in Stations
priorities available • One-touch operation
• Tilt/Release DIN • Large, backlit call buttons
receptacle allows for
easy, clean disconnect
• Custom buttons for
unique call priorities
of handset from the
patient station • Customized by facility,
floor, and area
• Auxiliary device
receptacle with separate • Water-resistant
call-in priority setting (bath station)
• LED to indicate specialty
bed is connected
• IV alarms and bed exit
Audio Pull-Cord Station
• Audio to the bathroom
• Easy to use pull-cord
• Call-in button for
routine calls
Staff Assignment
Responder 5 simplifies your workflow. Staff
assignments can be scheduled up to one week
in advance, allowing for continuity of care for
your longer term patients from day to day and
caregiver to caregiver. The system’s layout gives
management a visual indicator of the workload
for each staff member as patients are assigned
to staff; so the nurse manager can continuously
assess and level load for each caregiver.
PC Console
Responder 5 shows activity in a user-friendly
application without sacrificing the reliability of a
closed network. Information from many sources
is integrated into staff directories, calls lists, and
services giving staff the whole picture. Integration
with patient information systems, staff/patient
tracking systems, wireless devices, and nurse call
hardware makes the staff’s job easier and more
efficient by seamlessly incorporating meaningful
information from disparate systems. An intuitive
screen design makes Responder 5 easy-to-use and
easy-to-learn, facilitating higher user compliance.
Reports Manager
The Reports Manager module generates reports
— exception reports, detail reports, and statistical
summary information — wrapped in a user-friendly
interface. Responder 5’s fully historical MS SQL
database makes data easily available at any time
and yet secure enough for your most stringent IT
security policy.
Simple implementation
with low demand on IT staff
Responder 5 is a VoIP network running the SIP standard protocol which makes interfacing to wireless
phones and other technologies easy. In fact, the integration capabilities of Responder Systems are far
more sophisticated and robust than those in other nurse call systems. Our solution delivers faster
connection times and greater traffic handling capacity.
The solution’s information applications make use of standard IT architecture; they operate (and are
managed) independent of the nurse call infrastructure. The integration of Responder 5 with the
hospital’s information system and with other systems (such as wireless phones, and “Real Time
Locating Systems”) is accomplished via a single point of connection using standard protocols. These
features result in greater overall reliability and simpler, more cost-effective maintenance and support.
Responder 5 utilizes standard CAT 5E/6 cabling. Because it has an Ethernet backbone, the system
can also run long distances on fiber.
Network
Wireless
Phones
Hospital LAN
1 2
354015
Adapter Plate
SPECIFICATIONS
Power Required: 7.1mA @ 18VDC Housing and Finish: High-impact molded Cycoloy 2950
Weight: 0.2 lbs (0.8 kg) UL 94-5VB; light grey faceplate
Size: W: 3.2” (8.0 cm) Controls/Indicators: (2) push buttons for call actuation,
H: 4.25” (10.8 cm) Two (2) Call-assurances LEDs, One (1) Cancel button
D: 0.6” (1.5 cm) in back box: 0.5” (1.3 cm) off-wall Terminations: Plug-on connectors
with adapter plate
Backbox Requirement: 1 gang (Non-gangable), 3 1/2”
W: 3.9” (9.9”) Deep
H: 5.0” (12.7 cm)
D: 0.6” (1.5 cm) in back box: 0.7” (1.8 cm) off-wall
DESCRIPTION
The Staff Assist / Code Station is an emergency dual associated corridor light or domeless room
pushbutton station that has the ability to place two (2) controller and is continually supervised. A non-cancelable
unique call priorities from a single station. Using special call will annunciate at the associated console(s) when the
buttons, the station can be customized for unique call-ins station is removed from the system or a short occurs. The
such as: “Code Pink”, “Push for Help”, etc. The call will detail the location of the station (see Configuration
buttons can also be used for staff registration such as: and Installation Manual for more details).
“Nurse in Room”, etc. The Cancel button allows for
cancellation of the call at the station. This type of station is
normally located at a patient room head wall for placing a
call for help, staff emergency and/or code call. The station
provides outputs for elapsed timer(s) (the associated timer
must support either a momentary or latched contact closure
input). The Staff Assist / Code Station is connected to its
SPECIFICATIONS
Display: 5-line display on a color, ¼ VGA screen Housing and Finish: High-impact molded Cycoloy 2950
Power Requirements: PoE (802.3af compliant) 26-56VDC UL 94-5VB; light gray faceplate
9 watts Controls/Indicators: Four (4) soft touch keys program-
Connection: 10/100 Mb Ethernet mable for up to thirty-two functions; Three (3) line selector
Weight: 2.65 lbs (6.7 kilograms) without carton or keys; One (1) scroll key for call selection; One (1) scroll key
Ethernet cable for function selection; One (1) standard ten (10) key dial
Size: W: 10.4” (26.4 cm) pad; One (1) Push-to-Talk button; One (1) cancel button;
H: 9.2” (23.3 cm) One (1) volume control button
D: 1.9” (4.8 cm) Terminations: Plug on connector.
DESCRIPTION
The VoIP Nurse Console is typically located at a local Push-to-Talk key for a hands-free conversation. The VoIP
nursing station, work station, centralized communications Nurse Console can be configured for up to twenty-four (24)
center, or any place where staff receive calls, communicate functions including Setting/Review Service Requirements,
with staff, or initiate any Responder 5 related features. The Emergency Call Upgrade, Day/Night tones, Staff Follow,
console may be desk or wall mounted. The VoIP Nurse Sequential Room Monitor, Swinging Groups of Rooms, etc.
Console provides complete information concerning These functions are activated using the scroll key pad and
incoming calls including: patient or staff member’s room selector buttons. Functions are customized on an individual
location, bed (if applicable), call priority, and length of time basis allowing each VoIP Nurse Console to be programmed
call has been waiting. An operator may selectively answer for its specific location and purpose. The VoIP Nurse
any of three (3) calls displayed or scroll through a list using Console is continually supervised for both power and
the key pad for call selection. A call may be answered signal.
using the handset for semi-private conversation or the
AudiaFLEX is an expanded version of Audia,® the benchmark in digital audio systems for demanding
professional sound installations. AudiaFLEX provides the same easy-to-use software and functional
algorithms, but with far greater flexibility in the choice of I/O configurations. Inputs and outputs may
be specified by pairs, in any combination, up to a total of 24. All possible I/O configurations are available
with or without CobraNet,® for multi-device or stand-alone systems. The intuitive software provides
audio system design capabilities via PC computer, and allows easy selection, viewing, and calibration
of numerous audio components: mixers, combiners, matrixes, equalizers, filters, crossovers, dynamics,
routers, delays, remote controls, meters, generators, diagnostics, etc. Once a system design is compiled,
it is downloaded into AudiaFLEX, where it can then be controlled via third-party systems such as AMX®
and Crestron,® via daVinci™ software, and/or via dedicated Audia remote control panels.
FEATURES
• up to 24 inputs/outputs, with or without CobraNet • Ability to select, view, and calibrate:
• input (IP-2), echo canceling (AEC-2HD), telephone ° Mixers: standard, automatic, matrix, combiners
(TI-2), output (OP-2e), & amplifier (PA-2) cards ° Equalizers: graphic, parametric, feedback
• input and output expanders (8-channel/CobraNet) ° Filters: HPF, LPF, high shelf, low shelf, all-pass
• on-screen display of the total audio design ° Crossovers: 2-Way, 3-Way, 4-Way
• configuration/control via PC/laptop (Ethernet) ° Dynamics: leveler, comp/limiter, ducker, ANC
• third-party control via RS-232 or TCP/IP ° Routers: 2x4 ~ 56x56
• remote control panels for levels, presets, etc. ° Delays: 0 ~ 2000 ms
• built-in diagnostic tools ° Controls: levels, mutes, presets, schedulers,
• multi-level security coding logic gates, RS-232 commands, etc.
• unlimited system size ° Meters: signal present, peak, RMS
• RoHS compliance and AES grounding practices ° Generators: tone, pink-noise, white-noise
• CE marked and UL/C-UL listed ° Diagnostics: transfer function
• covered by Biamp Systems’ five-year warranty
Biamp Systems | 9300 S.W. Gemini Drive | Beaverton, OR | 97008 | USA | +1.503.641.7287 | www.biamp.com
1SPGFTTJPOBM1PXFS"NQMJmFST
53"]53"]53"]53"
Features:
t$POWFDUJPODPPMJOH
t&YUSFNFMZMPXOPJTF
t*OUFSOBMMZ.PVOUFE$POTUBOU7PMUBHF
5SBOTGPSNFST
t&YUFOTJWFQSPUFDUJPODJSDVJUSZ
t4BGFUZ$PNQMJBODFD567VT
$&
'$$
3P)4
Ashly’s TRA-Series expands on the SRA’s concept of “the right amp for the
job.” These 2RU amplifiers utilize our state of the art technology to create
'SPOUQBOFM
advanced, efficient amplifiers perfect for low impedance, 25V, 70V or 100V
installations with modest power requirements. Four models available in two- t4UFQ4JHOBM-FWFMBOE$MJQ-&%T
and four-channel configurations, with power ratings of 75W and 150W per
channel @ 4 ohms, 70V and 100V. 3FBSQBOFM
All audio controls of the TRA-Series amplifiers are on the rear panel or internal. t-FWFMBUUFOVBUPSTGPSFBDIDIBOOFM
A six-step LED meter for each channel lets you monitor all levels. All TRA am- t&VSPCMPDLJOQVUT
plifiers can drive four or eight ohm loads and 25V or 70V and 100V constant
t&VSPCMPDLPVUQVUT
voltage lines simultaneously. Output transformers are internally mounted. The
150W models are capable of driving 25V constant voltage lines using the t4FMFDUBCMFJOQVUTFOTJUJWJUZ
direct coupled 4 ohm output. t3FNPUFQPXFSUVSOPOPGG
TRA-Series amplifiers incorporate a switch-mode-power supply and Class-D t"EKVTUBCMFUVSOPOEFMBZVQUPFJHIU
amplifier circuitry, providing an extremely power-efficient solution. All TRA- TFDPOET
Series amplifiers are convection-cooled, so there’s little maintenence after
the installation, and no annoying fan noise. Of course you get the reliability,
superior sonic quality and rugged construction you’ve come to expect from
Ashly. 8BUUTQFSDIBOOFM
Features include: convection cooling, extremely low noise, extensive protec- Model 8 ohms 4 ohms 25V/70V/100V
TRA-2075 40 75 75/75/75
tion circuitry, euroblock inputs and Euroblock outputs. Front panel features TRA-2150 80 150 150/150/150
include: mains power switch and an LED signal level meter indicating –24dB, TRA-4075 40 75 75/75/75
TRA-4150 80 150 150/150/150
-18dB, -12dB, -6dB, -3dB and clip alert for each channel. Rear panel features
include: level attenuators for each channel, rear panel switches to select be-
tween two choices of input sensitivity, remote power turn-on/off and adjust-
able turn-on delay up to eight seconds.
®
Networked Paging Station-1 is a microphone console using a single cable to carry audio, control, and
power, with an innovative user-interface, designed exclusively for use with AudiaFLEX systems. It
provides a powerful and easy-to-use set of tools with a wide range of features and functions for the
paging market. Networked Paging Station-1 is ideal for stadiums, convention centers, shopping malls,
and other facilities where affordable and reliable delivery of clear audio is paramount. Networked
Paging Station-1 integrates with AudiaFLEX networks via CobraNet®. Utilizing the Networked Paging
Station-1 LCD display, scroll-wheel, and three buttons, users can quickly switch between pre-
programmed groups and zones to address even the most complex page routing network.
FEATURES
designed for exclusive use with AudiaFLEX systems 16 simultaneous pages allowed per AudiaFLEX unit
Power Over Ethernet (PoE) or external supply 32 programmable microphone button operations
CobraNet audio/control plus power on single cable 16 priorities, with override and lock-out functions
rotary encoder with LCD for programming/setup selectable announcement chime tone options
Biamp Systems | 9300 S.W. Gemini Drive | Beaverton, OR | 97008 | USA | +1.503.641.7287 | www.biamp.com
Model MX400D Series Microphones
Specification Sheet
MODEL VARIATIONS
S MX412D: 304.8 mm (12 in.) desktop mini-condenser, goose- S MX418D: 457.2 mm (18 in.) desktop mini-condenser, gooseneck-
neck-mounted microphone. mounted microphone.
SPECIFICATIONS
Frequency Response (Figure 1) Power Requirements
50 to 17,000 Hz 11 to 52 Vdc phantom, 2.0 mA
Polar Pattern (Figure 2) Environmental Requirements
Output Impedance (at 1,000 Hz) Operating Temperature Range: –18° to 57° C (0° to 135° F)
Rated at 150 Ω (180 Ω actual) Relative Humidity: 0 to 95%
Open Circuit Sensitivity Dimensions (Figure 3)
At 1 kHz, ref. 1 V per Pascal* Weight
Cardioid: –33.5 dBV (21.1 mV) MX412D: 0.81 kg (1.80 lbs.) net, 1.63 kg (3.62 lbs.) packaged
Supercardioid: –32.5 dBV (23.7 mV) MX418D: 0.82 kg (1.82 lbs.) net, 1.64 kg (3.64 lbs.) packaged
Omnidirectional: –28.0 dBV (39.8 mV) Cable Type (figure 7)
* 1 Pascal=94 dB SPL The attached custom cable contains a shielded audio pair and
Maximum SPL (1kHz at 1% THD, 1 kΩ load) three unshielded conductors for logic control.
Cardioid: 123.0 dB Overall diameter=0.6 mm (0.165 in.)
Supercardioid: 122.0 dB Certification
Omnidirectional: 117.5 dB Eligible to bear CE Marking. Conforms to European EMC
Equivalent Output Noise (A-weighted) Directive 89/336/EEC. Meets applicable tests and performance
Cardioid: 29.0 dB SPL criteria in European Standard EN55103 (1996) parts 1 and 2, for
Supercardioid: 28.0 dB SPL residential (E1) and light industrial (E2) environments.
Omnidirectional: 70.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL) REPLACEMENT PARTS
Cardioid: 65.0 dB
Supercardioid: 66.0 dB Snap-Fit Foam Windscreen (4 per pkg.) RK412WS
Omnidirectional: 70.5 dB Foam Ball Windscreen A99WS
Dynamic Range with 1 kΩ load
94.0 dB Locking Metal Windscreen A412MWS
Common Mode Rejection Replacement 3 m (10 ft) XLR Cable C120
45.0 dB minimum
Mute Switch Attenuation Custom Logic Cable (specify length) 15A523/1
50.0 dB minimum Omnidirectional Cartridge R183B
Preamplifier Output Clipping Level (1% THD)
–6.0 dBV (0.5 V) Supercardioid Cartridge R184B
Polarity Cardioid Cartridge R185B
Positive sound pressure on diaphram produces positive voltage
on pin 2 relative to pin 3 of XLR output connector. Base Plate Bumpers 80A8053A
Key Features
r &OHJOFFSFEGPSBQQMJDBUJPOTXJUIMJNJUFE
QMFOVNTQBDF
JODPSQPSBUJOHB4PVOE-
5VCFTQFDJGJDTIBMMPXCBDLDBOXJUIBO
JOTUBMMFEEFQUIPGPOMZJODIFT
r 0OFJO NN
USFBUFEGJCFS
XPPGFSXJUIDMPUITVSSPVOEBOEPOF
JO NN
TJMLEPNFUXFFUFS
Preliminary Specifications:
CM62-EZs-II Tile bridge included r &BTZBDDFTTTJYQPTJUJPOUBQTXJUDIGPS
WPMUBOEPINUSBOTGPSNFS
System Type 6.5-inch coaxial, in-ceiling, sealed (32-watt transformer for
CZQBTTQPTJUJPOBMMPXTGPSFBTZPSEFSJOH
25/70.7/100-volt or transformer bypass)
TUPDLJOHBOEJOTUBMMBUJPO
Impedance (nominal) 16 ohm
Sensitivity dB @ 2.83 v/1 m 87.5 dB r 3FEVDFEBNQMJGJDBUJPODPTUTXJUINBYJ-
Sensitivity dB @ 1 W/1m 1 90.5 dB NVNFGGJDJFODZJODMVEJOHE#TFOTJ-
Frequency Response (- 3 dB) 2 135 Hz - 22 kHz UJWJUZBOEPINJNQFEBODF
Frequency Response (-10 dB) 2 75 Hz - 22 kHz r 4VQFSJPSWPJDFJOUFMMJHJCJMJUZXJUIB
Max. Program Power 3 100 W
L)[DPWFSBHFBOHMFPG JOEFQFO-
Max. Continuous Power RMS 4 50 W
EFOUMZWFSJGJFE
Max. Power SPL @ 1 m 5 107.5 dB
Coverage Angle (-6 dB @ 2 kHz) 140º r $PTUFGGFDUJWFPINTFUUJOHTBMMPXT
Coverage Angle (-6 dB @ 10 kHz) 105º GPSUIFVTFPGNVMUJQMFTPGUXP
GPVS
Coverage Angle (averaged 2 - 10 kHz) 80º PSTJYTQFBLFSTJOBTZTUFNVTJOH
Directivity Factor (Q) 5.1 (averaged 100 Hz - 10 kHz) ; 5.2 (2 kHz) BTUBOEBSEBNQMJGJFSXJUIPVUBUSBOT
Directivity Index (DI) dB 6.2 dB (averaged 100 Hz - 10 kHz) ; 7.2 dB (2 kHz) GPSNFS
Tap Selector Six-position rotary switch with transformer bypass position
Transducer - Low-Frequency Driver 165 mm (6.50 in) Treated fiber cone, cloth surround
r *ODPSQPSBUFTBQBJOUFETUFFMHSJMMFGPS
Transducer - High-Frequency Driver 25.4 mm (1.00 in ) Silk dome tweeter MBTUJOHEVSBCJMJUZ
Low-Frequency Voice Coil 25.4 mm (1.00 in) r "EBQUBCMFUPNBUFSJBMUIJDLOFTTFTSBOH-
Crossover Frequency 4.0 kHz JOHGSPNJODI NN
mJODI
Network Type: Low Pass 12 dB per octave, 2nd order NN
Network Type: High Pass 6 dB per octave, 1st order
r 6- 6&":
BOE
D6-
$&
Enclosure Alignment Sealed
Enclosure Material Drawn steel backcan with ABS baffle &.$%JSFDUJWF&&$
&/
Grille Painted Steel (paintable) &/
BQQSPWFE
Inputs 4 position ceramic terminal strip r )JHIRVBMJUZCMBDLPSXIJUFQBJOUGJOJTI
Colors Black or white $VTUPNDPMPSTBWBJMBCMF(SJMMFJTQBJOU-
Backcan Diameter 245.6 mm (9.67 in) BCMF
Backcan Height 95.3 mm (3.75 in)
Visible Diameter 298.5 mm (11.75 in)
r *ODMVEFEBDDFTTPSJFT5JMFCSJEHF
6-
Visible Height 8.6 mm (0.34 in) MJTUFEJODIGMFYDPOEVJUDMBNQ
QBJOU
Mounting Hole Diameter 266.7 mm (10.50 in) TIJFMEBOEUXPXJSFOVUT
Min. / Max. Ceiling Thickness 0.9 mm (0.04 in) – 40.6 mm (1.60 in) r 0QUJPOBMBDDFTTPSJFT$PMPSDPEFE
Weight 3.2 kg (7.0 lbs) HSFFO
QSFDPOTUSVDUJPOCSBDLFU "$
Shipping Weight 3.6 kg (8.0 lbs) $.&;1$#
KVODUJPOCPY "$$.
Packaging One per box
&;+#09
Included Accessories Tile bridge, UL-listed flex conduit clamp, paint shield, hole
template, wire nuts Description
Optional Accessories Pre-construction bracket (AC-CMEZ6/8-PCB); junction box 5IF$.&;T**JTBJODI
DPBYJBM
(AC-CM-EZ-JBOX) UXPXBZ
CMJOENPVOU
JODFJMJOHTQFBLFS
Regulatory - UL 1480 (UEAY) and 2043 approved
XIJDIEFMJWFSTUSVFIJHIFGGJDJFODZ
Regulatory - CE Approved
BOEQFSGPSNBODFBDSPTTUIFPQFSBUJOH
RoHS Approved
CBOEXJEUI#ZJODPSQPSBUJOHBJODI
Transformer Taps
1
USFBUFEGJCFSESJWFSXJUIDMPUITVSSPVOE
1 W 1 m sensitivity determined using nominal 70.7 V Output 100 V Output 25 V Output
impedance JOBTFBMFEESBXOTUFFMCBDLDBO
UIJT
32 W 105.5 dB 32 W 105.5 dB 4 W 96.5 dB
2 Frequency response measured in half or TQFBLFSEFMJWFSTNBYJNVNGSFRVFODZ
full space as dictated by speaker mounting 16 W 102.5 dB 16 W 102.5 dB 2 W 93.5 dB
configuration
SFTQPOTF )[mL)[
E#
JOB
3 8W 99.5 dB 8W 99.5 dB 1 W 90.5 dB
DPNQBDUEFTJHO
Max program power is 3 dB above max 4W 96.5 dB 4W 96.5 dB 0.5 W 87.5 dB
continuous power
4
2W 93.5 dB
.PVOUJOHIBSEXBSFJTJODMVEFEBOE
Continuous power rating, EIA-426-B test GFBUVSFTBDPOTUBOUUFOTJPOXJOHFE
5
Max output based on max continuous power NPVOUJOHTZTUFNXJUIBHBVHFiGVMM
Features
Built in Web Server:
•
• Device Status
• Field upgradable
Easy Installation:
• Only requires CAT 5 connection (up to
300ft) to network
• Power over Ethernet (no power cord or
adapter). No other equipment needed
Multicast:
• Full multicast and broadcast support.
Send audio and/or scrolling text to indi-
vidual, multiple, or all devices simulta-
neously.
Sound Masking:
•
-
grammatically for sound masking
IP Speaker Overview
Advanced Network Device’s (AND) 2x2 drop-in ceiling tile IP Speaker is a
Power over Ethernet (PoE, PoE+) loudspeaker that requires only an RJ-45
connector to connect to existing data networks. Simultaneously broadcast
to both phones and speakers. Built in microphone and speaker for two way
communications.
Advanced Network Devices • 3820 Ventura Dr. Arlington Hts. IL 60004 • Phone: 847-463-2236 • Fax: 847-359-5418
Website: www.anetd.com • E-Mail: sales@anetd.com
Supported Protocols Software Options
• AND Clockwise
!
"
• SIP • DHCP
for scheduling, alarms, events, stopwatch, timer, optional theme sound library, sending
• IPv4 • IGMP News/RSS/Twitter/Weather/Stock feeds, etc.
• HTTP • ICMP
• Third Party Software: AND has a long-standing relationship with InformaCast (Sin-
• SLP • TCP/IP gleWire), and also supports IPSession (IPCelerate), SA-Announce (Syn-Apps), Mes-
• TFTP • UDP sageNet Systems, BellCommander (AcroVista), and others. AND devices will also work
with SIP-compatible products/PBX, such as Asterisk, 3CX, Shoretel, etc.
• NTP • MDNS and
MDNS-SD • Multiple: Can run Clockwise and 3rd party software concurrently.
• SNMPV1 &
SNMPV2c
• Weight: 6.5 lbs
• Approx: 2’x3”x2’
• PoE (IEEE802.3af) 15.4 W or
• PoE+ (IEEE802.3at) 25.5 W
• 10/100 Mb network connection
Speaker Size 8”
Average Sensitivity 95dB, 1W/1M
Audio Power 8 W / 16 W
Frequency Response 60 Hz - 17
kHz
Polar Plot See diagram
1
Diagram 1
8” Speaker Polar Plot
2 kHz Octave Band,
Grid Spacing = 6dB/Division
Advanced Network Devices • 3820 Ventura Dr. Arlington Hts. IL 60004 • Phone: 847-463-2236 • Fax: 847-359-5418
Website: www.anetd.com • E-Mail: sales@anetd.com
The Sapling Advantage
EACH CLOCK HAS A REPEATER BUILT-IN - Since each clock has a repeater
built right into each unit, there is no need for high power transmitters and
repeaters. Each clock receives the wireless signal and sends out the time to its
neighboring clock, making Sapling’s system unique and extremely accurate.
FULLY COMPLIANT - All of Sapling’s wireless clocks have UL, cUL and FCC
approval or pending status.
”
We installed over 100 of the wireless synchronized clocks in our
district two years ago and haven’t had one single problem. They are
mission critical, reliable and key to effective scheduling within the
district. a Richard Follmer, Technology Coordinator, North Hanover Township Schools
Wireless System Description
Sapling’s Wireless Clock System is the embodiment of innovation and reliability. Eliminating wiring throughout an
entire facility can save you thousands of dollars on installation and also allows for retrofitting of an existing installation.
While most wireless systems are limited to the range of the transmitter, Sapling’s is not.
Our ingenious technology allows each clock to act as a transceiver, meaning the secondary clocks both receive and
retransmit the signal, maximizing signal transmission distances. Because of the way this technology is utilized, the more
clocks in an area increases the quality of the signal.
The system starts with the SMA Series Wireless Master Clock which can receive time from any SNTP/NTP server or even a
GPS satellite. The master clock then sends out a wireless signal to the analog and/or digital wireless clocks using Sapling’s
frequency-hopping technology. Once the slave clocks receive the signal, it is then retransmitted to any of the clocks in
the surrounding areas.
Working on Sapling’s patented 915-928 MHz frequency-hopping technology, our system requires no FCC license,
eliminating extraneous fees. The Wireless System allows multiple secondary clocks to use the same frequency range
without interfering with other wireless products.
SBL Series Wireless Digital Clocks
Sapling’s SBL Series gives you the answer to your wireless digital clock needs. Working in conjunction with the SMA
Series Wireless Master Clock, the SBL Series integrates seamlessly with the SAL-2 Series Wireless Analog Clocks. Working
on Sapling’s 915-928 MHz frequency-hopping technology, the digital clocks will receive and transmit the signal once
a minute.
The innovative 915-928 MHz frequency-hopping technology allows for a better and clearer signal even if there is
interference in one of the frequencies. Not only can each clock receive the wireless signal, it also transmits the signal
which eliminates the need for many repeaters. The digital clocks are offered in a wide array of models featuring 2.5”
or 4” high characters, as well as four or six digit displays.
Sapling wireless clocks transmit a stream of data every two hours (standard) or four hours (economy) on the battery
operated (2 D-cells) model, and every minute on the 24V, 110V and 220V models. These clocks include automatic
calibration, as well as enhanced diagnostic functionality that allows the user to view the quality of the signal, amount of
time since the clock last received a signal, a comprehensive analysis of the clock itself and remaining battery life.
t Each clock acts as a repeater and transmitter t Improved sensitivity over SAL-1 Series (previous model)
t915-928 MHz frequency-hopping technology t Enhanced diagnostic mode for informing the user
t Frequent correction of battery level, signal strength, and complete
testing of the movement
t Receiving and transmission rate every two hours
(normal mode) or four hours (economy mode) t Quick correction for time change (max. 5 minutes)
for battery operation t Ideal for renovation projects using existing wiring
t Receiving and transmission rate of once a or for new installations
minute for 24V, 110V or 220V t FCC Compliant, FCC part 15 Section 15,247
t Internal antenna 2011 Winner*
*As awarded by The Chicago Athenaeum: Museum of Architecture and Design. In the Permanent Design Collection of The Chicago Athenaeum:
Museum of Architecture and Design.
Wireless Repeater
The Wireless Repeater is an ideal choice for extending the Sapling wireless signal when longer distances between clocks
are present. Upon receipt of the wireless signal from the main transmitter or any Sapling clock in the field, the repeater
can transmit up to a mile in open space which enables a broad transmission range to the subsequent slave clocks. The
signal is transmitted once a minute and is capable of sending it to the SAL-2 Series Analog Wireless Clocks and the SBL
Series Digital Wireless Clocks.
The SMA Series comes standard with SNTP/NTP capability for synchronization to any SNTP/NTP time source, or an
optional GPS can be added for UTC synchronization.
The SMA Series has a variety of additional options that can be purchased separately such as a fully functional web
interface for controlling the master clock from any computer so schedules or features can be changed from anywhere.
Other options include a SNTP/NTP server option that other devices can point to in order to receive time, or the ability to
handle up to eight auxiliary relays which can be used for programming bell schedules, lights, and more.
AXIS M30 Series addresses the market’s need for affordably priced, highly discreet and
easy-to-install indoor fixed domes with HDTV performance and 360°/180° panoramic views. They
are ideal for retail stores, hotels, schools and offices with tight budgets for video surveillance.
Providing superb video quality, AXIS M30 cameras range AXIS M30 cameras support AXIS Camera Application
from the palm-sized AXIS M3004-V and AXIS M3005-V Platform for intelligent video applications such as people
with HDTV performance, to the wide-angle AXIS M3006-V counting. AXIS M3006-V and AXIS M3007-P/-PV have
with 3-megapixel resolution, and AXIS M3007-P/-PV, substantial capacity for video analytics.
5-megapixel fixed domes that provide a 360° view when
ceiling mounted or 180° view when wall mounted. The cameras offer a convenient video management
solution with their built-in memory card slot for edge
All AXIS M30 cameras are vandal- and dust-resistant ex- storage and support for software such as the complimen-
cept for AXIS M3007-P, and can be mounted on walls or tary AXIS Camera Companion.
ceilings. AXIS M3007-P is instead even more discreet
with its smoke-detector look. AXIS M3004-V/M3005-V/ Simplifying installation, AXIS M30 cameras come with a
M3006-V cameras have a 3-axis camera angle adjust- 2 m (6.6 ft.) network cable and are powered using Power
ment for flexible installation. The three cameras also sup- over Ethernet (IEEE 802.3af).
port Corridor Format for vertically oriented video streams
that maximize coverage of areas such as corridors, hall-
ways or aisles. All AXIS M30 cameras come focused at
delivery.
Affordable, compact and easy-to-install fixed domes with
superb video quality
HDTV and multi-megapixel models 360°/180° fixed domes
AXIS M30 cameras share a discreet form factor and are designed AXIS M3007-P/-PV are 360°/180° fixed domes that can cover an area
for quick and easy installation. The models—with different viewing of more than 650 m2 (7,000 sq. ft.). They can be used to help detect
angles, resolution, frame rate and intelligent video capacity—have activities, track the flow of people and improve area management.
been optimized to provide best-in-class performance for the different
application needs of price-sensitive customers. AXIS M3007-P/-PV cameras support several viewing modes: 360° over-
view and dewarped views such as panorama, double panorama and quad
AXIS M3007-P/-PV cameras have a 5-megapixel sensor that enables views. The quad view mode is suitable, for instance, when the camera is
detailed, high-quality 360° and 180° panoramic views. AXIS M3006-V positioned at an intersection of corridors. The camera also provides view
not only supports HDTV 1080p but can also provide 3-megapixel video area modes where users can digitally pan, tilt and zoom in on areas of
streams with 50% more resolution than HDTV 1080p. With a 134° an- interest.
gle of view, AXIS M3006-V can provide full coverage of an area when
installed near a corner. Meanwhile, the palm-sized AXIS M3004-V
and AXIS M3005-V provide the smallest form factor. AXIS M3004-V
supports full frame rate 1-megapixel/HDTV 720p performance, while
AXIS M3005-V delivers HDTV 1080p with more than double the
resolution of HDTV 720p.
Dimensions
27 mm (1.1”)
42 mm (1.7”)
42 mm (1.7”)
65 mm (2.6”)
85 mm (3.4”)
AXIS M3004-V
AXIS M3005-V AXIS M3006-V AXIS M3007-P AXIS M3007-PV
Optional accessories
White/black skin for Optional lens and AXIS T91A Camera Holders AXIS P8221 Network AXIS Camera Companion (included),
the camera casing focus tool for 3/4” or 1.5” NPS for I/O Audio Module AXIS Camera Station and video
(All models except AXIS M3004-V and AXIS M3006-V and management software from Axis'
AXIS M3007-P) AXIS M3005-V AXIS M3007-P/-PV Application Development Partners
(not included). See
www.axis.com/products/video/software/
www.axis.com
49979/EN/R1/1212
Technical Specifications – AXIS M30 Network Camera Series
Camera Network
Models AXIS M3004-V: 1 MP / HDTV 720p, vandal and dust resistant Security Password protection, IP address filtering, HTTPS* encryption,
AXIS M3005-V: 2 MP / HDTV 1080p, vandal and dust resistant IEEE 802.1X network access control, digest authentication, user
AXIS M3006-V: 3 MP / HDTV 1080p, vandal and dust resistant access log
AXIS M3007-P: 5 MP, 360°/180°, discreet smoke-detector look Supported IPv4/v6, HTTP, HTTPS*, SSL/TLS*, QoS Layer 3 DiffServ, FTP,
AXIS M3007-PV: 5 MP, 360°/180°, vandal and dust resistant protocols CIFS/SMB, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS,
Note: AXIS M3011 and AXIS M3014 are handled separately from the DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP,
new AXIS M30 Series SOCKS
Image sensor AXIS M3004-V: 1/4” progressive scan RGB CMOS System integration
AXIS M3005-V: 1/2.7” progressive scan RGB CMOS
AXIS M3006-V: 1/3.6” (effective) progressive scan RGB CMOS Application Open API for software integration, including VAPIX® and
AXIS M3007-P/-PV: 1/3.2” progressive scan RGB CMOS Programming AXIS Camera Application Platform from Axis Communications,
Interface available at www.axis.com
Lens M12 mount, F2.8, fixed iris, megapixel resolution
AXIS Video Hosting System (AVHS) with One-Click Camera
AXIS M3004-V: 2.8 mm, 80° horizontal angle of view
Connection
AXIS M3005-V: 2.8 mm, 118° horizontal angle of view
AXIS M3004-V/M3005-V/M3006-V: ONVIF, specification
AXIS M3006-V: 1.6 mm, 134° horizontal angle of view
available at www.onvif.org
AXIS M3007-P/-PV: 1.3 mm, 187° horizontal angle of view
Intelligent video Video motion detection, active tampering alarm
Light sensitivity AXIS M3004-V/M3005-V: 1.5 - 100000 lux, F2.8
AXIS Camera Application Platform enabling installation of
AXIS M3006-V/M3007-P/M3007-PV: 0.6 - 200000 lux, F2.8
additional applications
Shutter time AXIS M3004-V/M3005-V: 1/8000 s to 1/6 s (In AXIS M3007-P/-PV, additionally installed applications can be
AXIS M3006-V/M3007-P/M3007-PV: 1/24000 s to 2 s used in the 360° overview mode only)
Camera angle AXIS M3004-V/M3005-V: Pan ±175°, tilt ±45°, Event triggers Intelligent video, edge storage events
adjustment rotation ±175°
Event actions File upload: FTP, HTTP, network share and email
AXIS M3006-V: Pan ±180°, tilt 0-45°, rotation ±178°
Notification: email, HTTP and TCP
AXIS M3007-P/-PV: Rotation ±180°
Video recording to edge storage
Video Pre- and post-alarm video buffering
Video H.264 Main Profile (MPEG-4 Part 10/AVC), Motion JPEG AXIS M3006-V/M3007-P/M3007-PV: Go to PTZ preset, guard
compression AXIS M3006-V/M3007-P/M3007-PV: Also H.264 Baseline tour
Profile Data streaming Event data
Resolutions AXIS M3004-V: 1280x800 (1 MP) to 320x240 Built-in Pixel counter
AXIS M3005-V: 1920x1080 (HDTV 1080p) to 320x240 installation aid
AXIS M3006-V: 2048x1536 (3 MP) to 160x120
General
AXIS M3007-P/-PV: 2592x1944 (5 MP) to 160x120
Frame rate AXIS M3004-V/M3005-V: 25/30 fps with power line frequency Casing Casing color: white NCS S 1002-B; encapsulated electronics
H.264/Motion JPEG 50/60 Hz AXIS M3004-V/M3005-V: IP42 water- and dust-resistant,
AXIS M3006-V: IK08 impact-resistant, polycarbonate/ABS casing
3 MP capture mode: 16/20 fps with power line frequency AXIS M3006-V/M3007-PV: IP42 water- and dust-resistant,
50/60 Hz IK08 impact-resistant, aluminum and polycarbonate/ABS casing
HDTV 1080p (1920x1080) and 2 MP 4:3 (1600x1200) capture AXIS M3007-P: Discreet, smoke-detector like design,
modes: 25/30 fps with power line frequency 50/60 Hz aluminum and polycarbonate/ABS casing without
AXIS M3007-P/-PV: 12 fps in 360° overview and panoramic Memory AXIS M3004-V/M3005-V: 256 MB RAM, 128 MB Flash
views AXIS M3006-V/M3007-P/M3007-PV: 512 MB RAM, 128 MB
Video streaming Multiple, individually configurable streams in H.264 and Flash
Motion JPEG Power Power over Ethernet IEEE 802.3af
Controllable frame rate and bandwidth AXIS M3004-V: Class 1, max. 2.2 W
VBR/CBR H.264 AXIS M3005-V: Class 1, max. 2.7 W
Multi-view AXIS M3006-V: Up to 8 individually cropped out view areas. AXIS M3006-V: Class 2, max. 4.5 W
streaming When streaming 4 view areas and 1 overview in VGA resolution, AXIS M3007-P/-PV: Class 2, max. 4.6 W
the frame rate is 16/20 fps per stream with power line Connectors Male RJ-45 10BASE-T/100BASE-TX PoE on a 2 m (6.6 ft.)
frequency 50/60 Hz (3 MP capture mode) network cable
AXIS M3007-P/-PV: 360° overview, panorama, double Edge storage MicroSD/microSDHC/microSDXC slot supporting memory
panorama, quad view. Up to 4 individually cropped out and card up to 64 GB (card not included); support for recording to
dewarped view areas. When streaming 4 dewarped view areas network share (network-attached storage or file server)
and one 360° overview in VGA resolution, the frame rate is 10
fps per stream Operating Humidity 15 - 85% RH (non-condensing)
conditions AXIS M3004-V/M3006-V/M3007-P/M3007-PV: 0 ºC to 45 ºC
Pan/Tilt/Zoom AXIS M3004-V/M3005-V: Digital PTZ (32 ºF to 113 ºF)
AXIS M3006-V: Digital PTZ, preset positions, guard tour AXIS M3005-V: 0 ºC to 40 ºC (32 ºF to 104 ºF)
AXIS M3007-P/-PV: Digital PTZ with dewarping, preset
positions, guard tour Approvals EN 55022 Class B, EN 61000-6-1, EN 61000-6-2, EN 55024,
FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B,
Image settings Compression, color, brightness, sharpness, contrast, white C-tick AS/NZS CISPR 22, IEC/EN 69050-1
balance, exposure control, backlight compensation, wide All models except AXIS M3007-P: KCC Class B, UL 60950-1,
dynamic range - dynamic contrast, text and image overlay, IEC 60529 IP42, IEC 62262 Class IK08
privacy mask, mirroring of images
AXIS M3006-V/M3007-P/M3007-PV: Exposure zones, fine- Weight AXIS M3004-V/M3005-V: 200 g (0.44 lb.)
tuning of low light behavior AXIS M3006-V: 640 g (1.4 lb.)
AXIS M3004-V/M3005-V/M3006-V: Rotation: 0°, 90°, 180°, AXIS M3007-P: 570 g (1.3 lb.)
270°, including Corridor Format AXIS M3007-PV: 610 g (1.4 lb.)
AXIS M3007-P/-PV: Rotation: 0°, 180° Included Drill hole template, Installation Guide, Installation and
accessories Management Software CD, Windows decoder 1-user license,
* This product includes software developed by the OpenSSL Project for use Torx L-key
in the OpenSSL Toolkit. (www.openssl.org)
More information is available at www.axis.com
©2012 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB
in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right
to introduce modifications without notice.
DATASHEET
AXIS P33 Network Cameras constitute a series of indoor and outdoor-ready fixed domes. These
cameras are ideal for unobtrusive video surveillance, day and night, in exposed areas such as city
surveillance, airports, railway stations, retail stores, office buildings, museums, schools and
university campuses.
AXIS P33 Series offers models with exceptional image AXIS P3364-LVE incorporates new long-life LED
quality from SVGA resolution up to 5 megapixel, technology that is highly power-efficient. Adjustable in
including SMPTE-compliant HDTV 720p and 1080p angle and intensity, the built-in IR solution offers easy
video. AXIS P33 Series provides multiple, individually configuration optimizing for the scene. All AXIS P33
configurable H.264 and Motion JPEG video streams. cameras support the remote focus capability that
eliminates hands-on focusing at the camera, and remote
The SVGA and HDTV 720p/1MP models support Axis’ zoom that allows the camera’s angle of view to be
Lightfinder technology, which makes these cameras optimized.
extremely sensitive to low light. AXIS P3384-VE that
additionally supports wide dynamic range (WDR) with All AXIS P33 cameras offer digital pan/tilt/zoom and
‘dynamic capture’, provides outstanding video quality in the 3-megapixel and 5-megapixel models additionally
the most demanding conditions with strong variations provide multi-view streaming. The weatherproof
in light. The 5 megapixel model, AXIS P3367-VE, can AXIS P33-VE/-LVE cameras have low, environmental-
cover a large area with exceptional detail and light friendly power consumption supplied by standard Power
sensitivity. All AXIS P33 models support P-Iris control over Ethernet (IEEE 802.3af), and operate in a wide
for optimal image clarity. temperature range from -40 °C to 55 °C (-40 °F to 131 °F).
Fixed domes designed for efficient installation
Outdoor-ready models of AXIS P33 Series are the perfect choice for a wide range of demanding
video applications. AXIS P33 Network Cameras are designed for professional video surveillance
with easy and reliable installation in focus.
49387/EN/R1/1211
Technical Specifications (cont.) – AXIS P33 Network Camera Series, outdoor models
General Edge storage SD/SDHC/SDXC slot supporting memory cards up to 64 GB
(card not included)
Casing Polycarbonate transparent cover
Aluminum inner camera module with encapsulated electronics Support for recording to network share (network-attached storage
Color: white NCS S 1002-B or file server)
IP66- and NEMA 4X-rated, IK10 impact-resistant casing with Operating -40 °C to 55 °C (-40 °F to 131 °F)
aluminum base and dehumidifying membrane conditions Humidity 10 - 100% RH (condensing)
Memory 256 MB RAM, 128 MB Flash Approvals EN 50121-4, EN 55022, EN 55024, EN 61000-6-1, EN 61000-6-2,
AXIS P3367-VE: 512 MB RAM, 128 MB Flash IEC/EN/UL 60950-1, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-
14, IEC 60068-2-27, IEC 60068-2-64, IEC 60068-2-78, IEC 60529
Power Power over Ethernet IEEE 802.3af
AXIS P3363-VE/P3364-VE/P3364-LVE/P3384-VE/P3367-VE: IP66, NEMA 250 Type 4X, IEC 62236-4, IEC 62262 IK10, FCC Part 15,
Class 3; max 12.1 W Subpart B Class B, ICES-003 Class B digital, VCCI, ITE, C-tick AS/NZS
AXIS P3346-VE: Class 3; max 12.8 W CISPR 22, KCC AS/NZS CISPR 22, KN 22, KN 24
AXIS P3364-LVE: EN 62471
Connectors RJ-45 10BASE-T/100BASE-TX PoE
Terminal block for 1 alarm input and 1 output Included Installation Guide, Installation and Management Software CD,
3.5 mm mic/line in, 3.5 mm line out accessories Windows decoder 1-user license, connector kit, mounting bracket,
5 m (16 ft.) network cable with pre-mounted gasket
IR illumination AXIS P3364-LVE: Power-efficient, long-life IR LED’s with adjustable AXIS P3363-VE/P3364-VE/P3384-VE/P3346-VE/P3367-VE:
angle of illumination and intensity. Range of reach up to 30 m Weather shield, smoked transparent cover
(100 ft.) depending on scene
Dimensions and weight - AXIS P33 Network Camera Series, outdoor models
60 mm (2.4”)
60 mm (2.4”)
119 mm (4.7”)
110 mm (4.3”)
123 mm (4.8")
117 mm (4.6")
96 mm (3.8’’)
96 mm (3.8’’)
©2012 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB
in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right
to introduce modifications without notice.