Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
2. Mainframe System
2-1 New button in Pair Operation window to delete registered command devices
Description To delete all the command devices registered via BCM, a button has been added in the Pair
Operation window of True Copy for z/OS of Storage Navigator that is started from an SVP
launcher. Clicking the button can delete all the registered command devices.
To use this function, both the DKCMAN and SVP must use the modified micro-programs.
3. OPEN System
NONE
HDS Confidential 1 of 5
The change of contents for Version 50-09-82-00/00
1 Failure of SM un-installation without SM for E-Copy mounted
Phenomena Un-installing SM failed.
Severity (High, Medium, Low) Medium
Conditions of Occurrence The problem occurs when all the following conditions are met.
1. Server less Backup Enabler (E-Copy) is ON
2. SM for E-Copy is not mounted In Shared Memory Size Configuration
window, the E-Copy/TPF checkbox for the Install function is not checked
3. SM un-installation is performed as a maintenance operation
Affected Products/Version DKCMAIN: 50-03-99-00/08 and higher
Fixed Product/Version DKCMAIN: 50-09-82-00/00
Category Server less Backup Enabler
Changed Part DKCMAIN
HDS Confidential 2 of 5
4 Failure of CoW pool creation after MP replacement
Phenomena Creating a CoW pool failed with a Storage Navigator error message output
(3005 58474: The capacity of shared memory is insufficient or an error
occurred during SVP processing.).
Severity (High, Medium, Low) Medium
Conditions of Occurrence The problem occurs when all the following conditions are met.
1. During CoW pool creation, WCHK1 occurs
2. The error in #1 is recovered by MP replacement
3. After the recovery, SI is not initialized
4. A CoW pool is created
Affected Products/Version DKCMAIN: 50-04-06-00/00 and higher
Fixed Product/Version DKCMAIN: 50-09-82-00/00
Category Copy-on-Write Snapshot
Changed Part DKCMAIN
HDS Confidential 3 of 5
7 Pair failure suspend at MIH or server timeout
Phenomena Pairs of TC/TCA/TCz/TCzA/UR/URz/SI/SIz/Snapshot were suspended
when MIH or server timeout occurred.
Severity (High, Medium, Low) Medium
Conditions of Occurrence The problem may occur when all the following conditions are met.
1. Pairs of TC/TCA/TCz/TCzA/UR/URz/SI/SIz/Snapshot
2. Either of the following:
An MIH occurs or Server timeout occurs
Affected Products/Version DKCMAIN: All
Fixed Product/Version DKCMAIN: 50-09-82-00/00
Category TC/TCA/TCz/TCzA/UR/URz/SI/SIz/Snapshot
Changed Part DKCMAIN
HDS Confidential 4 of 5
11 Invalid error code at FC Establish execution
Phenomena When FC Establish was executed with a PAV alias volume specified as a
target volume, the command was rejected with F/M=0x04 output instead
of F/M=0x0F and RC=0x64, which were output from the IBM storage.
Severity (High, Medium, Low) Low
Conditions of Occurrence The problem occurs when FC Establish is executed with a PAV alias
volume specified as a target volume.
Causes and Updates Microcode modified so that F/M=0x0F and RC=0x64 are output when the
command above is rejected, which is the same case as an IBM storage
Affected Products/Version DKCMAIN: 50-09-01-00/00 and higher
Fixed Product/Version DKCMAIN: 50-09-82-00/00
Category Compatible Flash Copy V2
Changed Part DKCMAIN
HDS Confidential 5 of 5