Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1.1 Basic
The first step of a measurement using the complete Fingerprint method is to
compare the actual spectrum with the stored spectra of Fingerprint Reference
Materials. After the instrument has selected the reference material which best
fits with the actual spectrum, the specific source parameters and calibration
data for this Reference material method are loaded. The measurement is con-
tinued with these settings and the quantitative analysis and/or the grade name
are displayed. A full fingerprint analysis takes less than 5 seconds.
The order of the elements displayed on the screen depends on the selected
Reference Material method.
Averages for documentation are not possible, because with each measurement
another Reference Material Method with a different set of elements may be
loaded.
“Full automatic” (Full)
The same as “Single measurement” mode, but the “Fingerprinting” is only done
for the first measurement or after each average. The Fingerprint method can be
started manually from the menu „Fingerp.“. The measurement times for all 2nd,
3rd, … measurements are the short ones used traditionally in arc mode
(approx. 4 seconds).
“Semi automatic” (Half)
The same as “Full automatic” mode, but the “Fingerprinting” is only done for the
first measurement. The Fingerprint method can be started manually from the
menu „Fingerp.“. The measurement times for all 2nd, 3rd, etc. measurements
are the short ones used traditionally in arc mode (approx. 4 seconds).
“No Loading”
After measuring the sample the base element (and Reference Material
Method), which best fits with the actual spectrum are selected and displayed. If
no respective method is installed only the base element is displayed. In both
case no analyses is shown on the screen.
We recommend using the adapter with silver disc electrode (star-shaped) for
the Fingerprint method. To avoid memory effects and to get the best results,
please rotate the disc for each “Fingerprinting”.
Working in the “Semi automatic” mode, a new silver rod electrode for the one-
time “Fingerprinting” can be chosen. When using the “Full” or “Semi automatic”
mode, remember to stay with the chosen Reference Material method for the fol-
lowing measurements
It may not be the best performing Reference Material method, because the
"Fingerprinting" is only done for the first measurement and after each average
respectively just once at the beginning.