Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
DR 24 D 12 R
Crydom SeriesOne DR Solid State Relays were developed to offer the advantages of Crydom's thermal management
technology in a compact 11 & 18 mm wide IP20 housing with unique integrated heat sink. The SeriesOne DR provides
a quick and easy installation onto any standard 35 mm DIN rail profile paired with high output power ratings.
Wire the relay to the output side. AWG #22 minimum (0.3 mm2), To remove from R: Random Turn-On
E RE
xxx L
AWG #14 (2.1 mm2) x 2 or AWG #12 (3.3 mm2) x 1 (standed/solid) DIN rail (AC Output Only)
LAY
+3/A1
1/A1
2/A
0.0
4/A
0.0 2 2
0 10 20 30 40 50 60 70 80 0 10 20 30 40 50 60 70 80
Ambient Temperature (°C) Ambient Temperature (°C)
2/A2
4/A2
(D, E) (D, E)
INPUT
STATUS STATUS
DRxxx12 & DRDxxD06
INPUT
INPUT
STATUS
(Combined for Dual) [Amp]
12.0
Single and multiple units for DRxx03 +A
4/B2
10.0
1/L1
DC (C) -A
3/B1
Load Current
2/T1
8.0 Installed single unit, distance to adjacent CONTROL +B
-B
components ≥ 11 mm for DRxxx06 and ≥ 18
6.0
mm for DRxxx12 & DRDxxD06
4.0 d dB
Multiple units, no minimum spacing between
AC/DC SUPPLY Loa AC SUPPLY Loa
2.0
components
0.0
0 10 20 30 40 50 60 70 80
Ambient Temperature [°C]
(B) No grounding wire required. DC inductive loads must be diode suppressed.
WARNING DANGER (C) 4 Pin connector for dual channel output only. Mating connector: MOLEX
RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH 050579404 or equivalent.
• The product's side panels may be hot, allow the product to cool before touching.
• Follow proper mounting instructions including torque values. • Turn off power supply before working on this equipment. (D) 4 Terminal screws Pozidrive #1, 3/16 in (4.8 mm).
• Do not allow liquids or foreign objects to enter this product. (E) Minimum wire insulation strip length 0.20 in (5.1 mm), maximum 0.28 in (7.1 mm).
Failure to follow these instructions can result in serious injury, or equipment damage. Failure to follow these instructions will result in death or serious injury.
Rev: 031113