Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Coil Off
2.4
Delay On Make Function are not recommended due to the response time 1 8
of the mechanical relay)
PROGRAMMING
SPECIFICATIONS To program the timer, remove power from the unit
TIME DELAY and select the time range; use the digital switch-
Adjustment: 3 digit push-button switch es to select the required time (0 to 999)
4 5
Range: 50 ms to 999 minutes in 5 ranges 3 6
Repeatability: ±0.1%, ±.02 seconds over speci- 2 7
fied timing range 1 8
Input
Voltage
PIN CONFIGURATION
Polarity Shown is
for D.C. Models
ORDERING INFORMATION
TIME RANGE 12 VDC 24 VDC 24 VAC 120 VAC 240 VAC
AMETEK National Controls Corp. • 1725 Western Drive • West Chicago, Illinois 60185 • Tel: 800-323-2593 • 630-231-5900 • FAX: 630-231-1377 • www.nationalcontrols.com