0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
67 visualizzazioni1 pagina
JMV’s proficiently developed Class B+C Surge protection devices designed by combining Class B and Class C surge protection devices designed for LPZ 0 and LPZ 2 zone.
Titolo originale
Class B +C Type II three phase Surge Protection Devices
JMV’s proficiently developed Class B+C Surge protection devices designed by combining Class B and Class C surge protection devices designed for LPZ 0 and LPZ 2 zone.
JMV’s proficiently developed Class B+C Surge protection devices designed by combining Class B and Class C surge protection devices designed for LPZ 0 and LPZ 2 zone.
JMV/B+C/# NPE: Class B+C surge protection devices offer solution with combined performance over 8/20 µs and 10/350 µs waveform to withstand against lightning and switching surges. These Surge protectors are also used for the protection of single & three phase lines but the combined protection declares them as the upgraded version of its range. Class B+C surge arresters are dedicatedly known as Type I+II lightning cum switching surge protection devices which are acknowledged for its dual protection in the vicinity of LPZ0-2.
Model JMV/B+C/1 NPE JMV/B+C/3 NPE
Housing material PA
Number of Modules 2 4
Degree of protection IP20
Mounting type DIN rail: 35 mm
Ambient temperature (operation) -40 °C ... 80 °C
Nominal voltage UN 230 V AC (230/400 V AC ... 240/415 V AC)
Arrester rated voltage UC 320 V AC (L-N), 255 V AC (N-PE)
Nominal frequency fN 50 Hz
Lightning test current (10/350) µs, peak value limp 25 kA
Nominal discharge surge current In (8/20) µs 30 kA (L-N); 30 kA (N-PE)