Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
CIRCUIT DESCRIPTION
The vehicle height is controlled by pressing the ”HIGH” button of the height control switch, ”Height Hi” is dis-
played on the multi−information display.
WIRING DIAGRAM
1
CPU
19
P
A20 VH
17
6 15
W−B W−B
PF PF
11
MULTI−DISPLAY
J/C
B D
Y Y
J16 J17 To Battery
II
F45840
INSPECTION PROCEDURE
1 CHECK HARNESS AND CONNECTOR(SUSPENSION CONTROL ECU −
COMBINATION METER ASSY) (SEE PAGE 01−41)
Suspension Control ECU: (a) Disconnect the suspension control ECU A20 connector.
(b) Disconnect the combination meter assy C12 connector.
(c) Measure the resistance according to the value(s) in the
table below.
Standard:
Tester Connection Specified Condition
A20−19 (VH) − C12−17 Below 1 Ω
A20−19 (VH) − Body ground 10 kΩ or higher
A20
VH
G25094 F44492
C12
17
OK
Combination Meter Assy: (a) Measure the resistance according to the value(s) in the
table below.
C12
Standard:
Tester Connection Specified Condition
C12−11 − Body ground Below 1 Ω
11
NG REPAIR OR REPLACE HARNESS OR
F45841 CONNECTOR
OK