Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
EURODRILL
A KELLER COMPANY
Product Catalogue
www.colcrete-eurodrill.com
Contents
Colcrete
Eurodrill
08 Collodial Grout Mixers Drill Rods 32
25 ColJetTM
26 Bespoke Systems
COLCRETE
EURODRILL
A KELLER COMPANY
Colcrete Eurodrill
Colloidal Mixing and
Pumping Equipment
A true colloidal mixer utilises a mill that applies a shearing effect on
the media particles, efficiently creating a mix that is fluid, stable, and
able to be pumped over considerable distances.
ASD2000 mixer
Batch Capacity 2000 litres, Powered by four 22kW motors, with a
discharge pressure of 2 bar approx and each mill rates up to 700
litres per minute. This mixer is capable of outputs of 32-40 cubic
metres per hour, dependent on mix design and material feed rates. SD120 mixer, air powered
It comes with a central control panel, which includes supplies for up
to 3 screw feeds and a water pump (5.5kW) (Sockets provided with • Air powered c/w water tank
plugs).The mixer is fitted with a task 920i weigh system, and onboard • Max. Batch Capacity 120 Litres.
compressor. It incorporates a pre-batch facility for water through an
• Powered by a 12m3/per min air motor,
electronic flowmeter and the following running options - full manual,
• A discharge pressure of 2 bar approx and rates up to 700 litres per minute
single batch or continuous batch control. Included in the supply is an
adjustable level sensor for your agitation tank so that space available • Max Output 2.5 to 3.5 cubic metres per hour, dependent upon mix design
can be checked prior to adding powders to the mixer. and material feed rates. Includes 100L measuring tank.
• Diesel powered c/w water tank Colmixer SD2000 32-40 2000 2 4X22 - -
• Max. Batch Capacity 400 Litres. Powered by a Hatz
2L41C Diesel engine, electric start, fitted with a Colmixer SD1000 16-20 1000 2 2X22 - -
‘Silentpack’ noise reduction package.
• A discharge pressure of 2 bar approx and rates up to Colmixer SD700 12-16 700 2 2X22 - -
700 litres per minute.
• Max Output 5 to 10 cubic metres per hour, dependent Colmixer SD400 5.0-10 400 2 22 30 -
upon mix design and material feed rates.
Colmixer SD300 4.5-8.0 300 2 22 30 -
COLCRETE COLCRETE 09
08 EURODRILL EURODRILL
A KELLER COMPANY A KELLER COMPANY
Paddle Assisted Colloidal Grout Mixers
Paddle Assisted Colloidal Grout Mixers
• Maximum batch capacity 2000 litres, • Maximum batch capacity 600 litres
• Powered by Two x 22kW motors driving the colloidal mills and • Colloidal mixer powered by a 22kW electric motor,
one 5.5kW electric motor driving the paddle. It has a discharge • Discharge pressure of 2 bar approx and rates
pressure of 2bar approx, and rates around 1000 litres per • Up to 700 litres per minute. Paddle / agitator powered by a
minute. 4kW electric motor
• Output 15 to 20 cubic metres per hour, complete with central • Complete with electrical control panel.
control panel. • This machine is capable of outputs of 6-8 cubic metres per hour
COLCRETE COLCRETE 11
10 EURODRILL EURODRILL
A KELLER COMPANY A KELLER COMPANY
High Pressure Grout Pumps
125.26
120
Flow (Litres/min)
99.17
100
Mocol HL Performance Curves 100.84
87.71
different power curve options available
200 80
71.72
150 60
56.17
Flow (Litres/min)
100 40
30.12
50 20
9.3
0 0
0 20 40 60 80 100 0 10 20 30 40 50 60 70 80
12 COLCRETE COLCRETE 13
EURODRILL EURODRILL
A KELLER COMPANY A KELLER COMPANY
High Pressure Grout Pumps
Weight 350 kg
Weight 750 kg
Dimensions 1530L x 605W x 685H
Dimensions 1820L x 1350W x 1470H
75 Drive Options
MAX MAX
Model Description OUTPUT PRESS ELECTR AIR
70 M3/Hr (BARS) (kW) (M3/MIN)
20
15
10
0
0 10 20 30 40 50 60 70 80 90
Pressure / Bar
COLCRETE COLCRETE 15
14 EURODRILL EURODRILL
A KELLER COMPANY A KELLER COMPANY
Low Pressure Grout Pumps
Maximum
Batch Capacity Colloidal Eletric Paddle Eletric
Model Output
(Litres) (KW) (KW)
(M3/HR)
Immiscible with water
Colmixer CP6000 20 - 25 6000 2x22 11
A critical property of colloidal mixed grout Colmixer CP4000 17- 22 4000 2x22 7.5
is that dilution in water is minimal. This
makes it ideal for underwater grouting Colmixer CP3000 15 - 20 3000 2x22 5.5
or for grouting anchors in water bearing
Colmixer CP2000 10 - 12 2000 22 5.5
ground conditions.
Colmixer CP1500 9 - 11 1500 22 4
COLCRETE COLCRETE 17
16 EURODRILL EURODRILL
A KELLER COMPANY A KELLER COMPANY
Low Pressure Colloidal Grout Mixer / Pump Units
Mixer/Pump Unit
Diesel - Skid
• Mixer Batch capacity 280 Litres, Powered by a Hatz 3L41C Diesel
Engine.
• 370 litre capacity agitated grout storage tank, Vertical mounted Max Batch capacity Batch capacity Max
progressive cavity grout pump. Model Output Mixer Pump pressure Electric Diesel
M3/Hr (Litres) (Litres) (Bar) (kW) (HP) L(M) W(M) H(M) WT(KG)
• Complete with water meter and batching system.
• This machine is capable of outputs of 4.5-8 cubic metres per hour
and pressures up to 10 bar max. Colmono 10/10 4.5-8 280 370 10 22+7.5 40 2.4 1.35 2.6 1900
Colmono CX 4/10 2.5-3.5 120 190 10 11+7.5 23 2.43 1.8 1.98 1250
Shipping weight 1875 kgs
Colmono 4/6 2-3 120 165 10 11+7.5 15 1.8 1.77 1.66 1150
Dimensions 2250L x 2450W x 2320H
Colmono 2/4 1.5-2.5 60 70 10 7.5+5.5 15 1.93 1.83 1.38 850
CX4/10 Colloidal
Mixer/Pump Unit
Diesel Wheeled
• 120 litre capacity colloidal grout mixer,
Rapid mixing of grouts containing sand
• 190 litre capacity agitated grout storage tank,
with vertical mounted progressive cavity grout A sand/cement ratio of up to 4:1 and neat cement grouts with water/
pump. Powered by a Hatz 2L41C Diesel engine, cement ratios as low as 0.36:1 without additives, or lower with plasticisers
electric start, fitted with a ‘Silentpack’ noise
or super-plasticisers providing flexibility, can be mixed as required on site
reduction package.
• Also available in a skid mounted version, this (Higher powered motors may be required)
machine is capable of outputs of 2.5-4.5 cubic
metres per hour and pressures up to 10 bar max.
COLCRETE COLCRETE 19
18 EURODRILL EURODRILL
A KELLER COMPANY A KELLER COMPANY
High Pressure Colloidal Grout Mixer / Pump Units
CMP1295 Colloidal
Mixer/Pump unit Shipping weight 1050 kgs
COLCRETE COLCRETE 21
20 EURODRILL EURODRILL
A KELLER COMPANY A KELLER COMPANY
Bentonite / Microtunnel Lubrication Units
The unmixed slurry is repeatedly recirculated through the zone of high MLU1664 Micro-Lube Unit 150 1000 90 100
shear within the mixer. This breaks down the clusters of dry particles
MLU1280 Micro-Lube Unit 150 1500 90 100
(agglomerates) and ensures maximum dispersion of fluids and solids.
MLU1291 Micro-Lube Unit 150 2000 90 100
COLCRETE COLCRETE 23
22 EURODRILL EURODRILL
A KELLER COMPANY A KELLER COMPANY
ColControlTM
ColjetTM
ColControlTM ColJetTM 1200 Mixer
ColControlTM is the brand name for Colcrete Eurodrill data acquisition Features a weighing system and process controller, providing automatic batching
and control software. of water, liquid additive, and 3 powdered components. This low maintenance unit
supplies up to 22 cubic metres of product per hour depending on mix design and
ColControlTM accurately controls flow and pressure rates for each material feed rates
grouting operation, and can be totally integrated with all Colcrete
Eurodrill grout pumps.
The unit shown is capable of controlling and logging data for two grout
pumps directly. All data is presented and saved in Excel format, and a
graph is produced and saved in a pdf format for each injection from which
daily reports can easily be extracted (Please see overleaf)
24 8
22
7
20
18 6
16
5
14
4
Flow (Litres/min)
12
10
3
8
6 2
4
1
2
0 0
0 12 24 36 48 60 72 86 98 110
Pressure / Bar
COLCRETE COLCRETE 25
24 EURODRILL EURODRILL
A KELLER COMPANY A KELLER COMPANY
Colcrete Eurodrill has a history of manufacturing
Bespoke Systems bespoke mixing and pumping equipment for job
Maximum
Batch Capacity Colloidal Eletric Paddle Eletric
Model Output
(Litres) (KW) (KW)
(M3/HR)
COLCRETE
28 EURODRILL
A KELLER COMPANY
Colcrete Eurodrill Drilling
and Threaded Casing Systems
Colcrete Eurodrill designs and manufactures a world leading range of drilling equipment for use
throughout the geotechnical and exploration industries.
Renowned for quality and precision in manufacture, the equipment is purpose built for long lasting
use in harsh and difficult ground conditions.
Drill Rods
Our history confirms that we meet industry Colcrete Eurodrill manufactures friction welded
standards for quality management and technical drill rods from our own specified body tube for all
standards. drilling applications with diameters from 60mm up
to 152mm, and effective lengths up to 12 metres.
When deadlines are tight, and pressure to get the
job done is high, you can have confidence that the Shrink fit rods are available from 168mm diameter
threads will match every time and above, and all our threads are nitrided for
optimum wear resistance.
Material Specifications
We ensure that all our products meet the highest standards, both in materials used, and manufacturing processes.
Drill Rods
A B C D E F G H Weight
Thread Diameter Wall Eff. Across
mm mm Length mm Flats mm mm mm mm Kg
Standard Drill Rods
2 7/8”API Reg 88.9 6.35 1000 31.75 76 40 12.7 85 20
Standard drill rods offer friction welded 2 7/8”API Reg 88.9 6.35 1500 31.75 76 40 12.7 85 26
tool joints with square spanner flats at both
ends. They are used in many applications, 2 7/8”API Reg 88.9 6.35 2000 31.75 76 40 12.7 85 32
such as geotechnical drilling, geothermal,
and for general quarry drilling etc. 2 7/8”API Reg 88.9 6.35 3000 31.75 76 40 12.7 85 44
2 3/8” API Reg 88.9 6.35 1000 25 76 40 12.7 82.55 19 Friction welding
2 3/8” API Reg 88.9 6.35 1500 25 76 40 12.7 82.55 25
Friction welding is a process that generates heat through mechanical friction
2 3/8” API Reg 88.9 6.35 2000 25 76 40 12.7 82.55 32 between a moving workpiece (the tool joint), and a stationary component
(the drill tube), with the addition of a lateral force called “upset” to
2 3/8” API Reg 88.9 6.35 3000 25 76 40 12.7 82.55 44 plastically displace and fuse the materials. Friction welding produces a very
strong forged joint, effectively creating a single piece from the two elements.
COLCRETE COLCRETE 33
32 EURODRILL EURODRILL
A KELLER COMPANY A KELLER COMPANY
Drill Rods
Drill Rods
Extended Tool Joints T4 Type Drill Rods
Colcrete Eurodrill extended tool joints are used on T4 type rods are manufactured specifically for the T4 water well
modern drill rigs where automatic rod handling systems rig. The rods are manufactured from our high grade CE80 tube.
exert great pressure on the drill rods.
A B C D Weight A B C D E F G H
Thread Diameter Wall Eff. Thread Diameter Wall Eff. Across
mm mm Length mm Kg mm mm Length mm Flats mm mm mm mm
2 3/8” API Reg 76 4 1500 25 24 2 7/8” API Reg 101 6.35 - 19 6000 14.32 88.9 86 76 127
2 3/8” API Reg 76 4 2000 25 29 2 7/8” API Reg 101 6.35 - 19 7600 14.32 88.9 86 76 127
2 3/8” API Reg 76 4 3000 25 41 2 7/8” API Reg 101 6.35 - 19 8144 14.32 88.9 86 76 127
2 3/8” API Reg 76 4 4000 25 53 2 7/8” API Reg 101 6.35 - 19 9144 14.32 88.9 86 76 127
2 3/8” API Reg 76 6.35 1500 25 24 3 1/2” API Reg 114.3 6.35 - 19 6000 14.32 88.9 86 76 127
2 3/8” API Reg 76 6.35 2000 25 29 3 1/2” API Reg 114.3 6.35 - 19 7600 14.32 88.9 86 76 127
2 3/8” API Reg 76 6.35 3000 25 41 3 1/2” API Reg 114.3 6.35 - 19 8144 14.32 88.9 86 76 127
2 3/8” API Reg 76 6.35 3700 25 49 3 1/2” API Reg 114.3 6.35 - 19 9144 14.32 88.9 86 76 127
2 3/8” API Reg 88.9 9.5 4000 25 83 Used in quarry drilling and open pit applications, where
large robust threads give extra life and require less force
2 3/8” API Reg 88.9 9.5 5000 25 103 to uncouple.
COLCRETE COLCRETE 35
34 EURODRILL EURODRILL
A KELLER COMPANY A KELLER COMPANY
Mayhew Junior Beco Thread Drill Rods
Drill Rods
B C D E F
Diameter Wall Eff. Across
A (mm) mm Length mm Flats mm mm
B C D E F Weight
Diameter Wall Eff. Across
A (mm) mm Length mm Flats mm mm Kg 139.7 9.5 - 19 1000 44.4 101.6 101.6
Mayhew Regular
This rod features an external upset with a large bore
through the tool joints for increased flushing.
A C E
Thread Diameter Eff. Across
B C D E F Weight mm Length Flats mm
Diameter Wall Eff. Across
A (mm) mm Length mm Flats mm mm Kg
2 3/8” API Reg - 2 3/8” API Reg 76 - 88.9 TBA 65/76
85.5 6.35 1000 38.1 70 50 18 2 3/8” API Reg - 3 1/2” API Reg 114 95
TBA
85.5 6.35 2000 38.1 70 50 29 2 3/8” API Reg - 2 3/8” API IF 88.9 TBA 76
85.5 6.35 3000 38.1 70 50 40 2 3/8” API IF - 2 3/8” API Reg 88.9 TBA 76
85.5 6.35 4000 38.1 70 50 51 2 3/8” API IF - 2 3/8” API IF 88.9 TBA 76
85.5 6.35 5000 38.1 70 50 62 2 3/8” API IF - 3 1/2” API Reg 95
114 TBA
85.5 6.35 6000 38.1 70 50 73 2 3/8” API IF - 3 1/2” API Reg 114 TBA 95
COLCRETE COLCRETE 37
36 EURODRILL EURODRILL
A KELLER COMPANY A KELLER COMPANY
Rope Casing
Rope Thread Rotary Casing
Rope thread casing is used for applications such as mini
piling. It is very robust, and able to take a high degree of
abuse which is quite normal on construction sites.
76 51 12 1, 2, 3 * *
89 64 12 1.2.3 * *
114 89 12 1,2,3 * *
Threaded Casing
133 108 12 1,2,3 * *
Duplex Heads can be supplied for all applications, please contact us for details.
COLCRETE 39
EURODRILL
A KELLER COMPANY
Rope Casing
Klemn Casing
Large Diameter Rope Klemm Rotary Casing
Thread Rotary Casing
Klemm threads can be used on relatively thin walled
casing, as the thread is able to withstand the shock
Colcrete Eurodrill produces rotary casings up to 864mm
loading and torque produced when using DTH hammer
diameter in standard lengths from 500mm to 2000mm.
and various overburden drilling systems. Listed below
are the casing and shoe sizes for the most popular
The table shows our standard range.
systems. Of course other sizes are available on request.
813 777 18 3 * * Standard Lengths 1000mm, 1500mm, 2000mm and 3000mm. Up to 12m
There are many Casing Advancement systems available on the market. We are
able to supply casing and shoes compatible with these systems.
COLCRETE COLCRETE 41
40 EURODRILL EURODRILL
A KELLER COMPANY A KELLER COMPANY
Water Well Casing
W Series
Water Well Casing W Series Casing
BS 879 Flush Butt The diagram is an example of BS 4019 W series casing.
All casing and rods can be manufactured to order.
ØD
Casing T.P.I W ØB Approx weight
(mm) (mm) (mm) (kg/m)
508.0 4 12.5 483.0 152.32 Standard Lengths 1000mm, 1500mm, 2000mm and 3000mm. Up to 12m
COLCRETE COLCRETE 43
42 EURODRILL EURODRILL
A KELLER COMPANY A KELLER COMPANY
Rotary Percussive
Reverse Circulation
Rotary Percussive RC Drill Rods
Colcrete Eurodrill Rotary Percussive Systems are used in some of
the toughest site conditions by the world’s leading geotechnical Double tube drill rod provided with inner tube and
contractors. friction welded tool joints with nitrided threads.
Screwing rods together automatically seals the inner
Rotary percussive drilling is a Top Hammer casing advancing tube without the need to provide further connecting
system used for drilling through tough ground conditions for parts.
applications such as rock anchoring. Drilling is typically performed
using a Duplex system, where the casing is driven independently.
COLCRETE 45
44 EURODRILL
A KELLER COMPANY
Jet Grouting Equipment
Outside Diameter Wall thickness Rod Type Thread Type Effective Length
(mm) (mm) (mm)
COLCRETE 47
46 EURODRILL
A KELLER COMPANY
COLCRETE
EURODRILL
A KELLER COMPANY
Colcrete Eurodrill
Tower Business Park
Derby Road
Clay Cross
Derbyshire
S45 9DX