Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Table of Contents
Page 1
https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
Installing Mongoose MFC Software from Techinfo Website
Required to proceed:
• PC with Windows XP, or 7 (32 or 64-bit), and Internet Explorer. Mongoose MFC does NOT
support Windows 8. Please upgrade to MongoosePro MFC if you are using Windows 8.
(procedure below is specific to Windows 7 32-bit PC and Mongoose MFC hardware)
• PC configured for access to the Internet
Page 2
https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
3. Click on Run to begin the installation.
4. Setup screen appears as shown below. Click on “I accept the terms in the License
Agreement” then click on Install.
5. During the installation, you will be notified to attach the Mongoose MFC device to the
Computer after the installation is complete. Click on OK.
Page 3
https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
6. Once the software installation is complete, click on Finish.
7. Connect the Mongoose MFC VIM to the PC via USB port. The Mongoose MFC driver will
be installed automatically. After a few minutes, confirm the green LED light in the OBD-II
end of the cable is flashing. This indicates the driver is installed and Mongoose VIM is ready
to be used.
Page 4
https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
2. Click on TIS -> Diagnostics -> ScanTool -> Techstream v4.21.002 Full Software
Installer
Note: At the time this document is written, the latest software version available is v4.21.002.
You may see an updated version listed.
Page 5
https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
4. Click on Run to begin the installation
Page 6
https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
7. Accept the License Agreement terms and click on Next
Page 7
https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
10. Click on Finish to complete the installation
Page 8
https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
3. Select a Language from the Drop-down option, default is English, and click on Next
Page 9
https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
2. Click on Software Registration button
4. Enter a Computer Name and a Shop/Owner Name and then click on Calculate Key
Page 10
https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
5. Copy the Key from Techinfo website
6. Return to Techstream Registration screen and paste the Key in the New Key: box then click on
OK to register.
Page 11
https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
Selecting the Mongoose MFC VIM from Techstream
Techstream software requires a VIM selection before you can use the Mongoose MFC VIM. To
Select the Mongoose MFC VIM, follow the steps below:
Page 12
https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
Connecting to Vehicle to Verify Techstream Lite Operation
Perform the following:
1. Connect Mongoose MFC device to PC via USB port.
2. Connect Mongoose MFC device to vehicle’s OBD-II port.
3. From Techstream main screen, click on Connect to Vehicle
4. Vehicle information should be populated as the example shown below. Select the
appropriate vehicle Option: and click on Next.
Page 13
https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1
5. From the System Select menu, select an ECU and click on the Green Arrow to confirm
communication with the ECU.
Page 14
https://techinfo.toyota.com
TS Lite STANDARD Kit Installation Instructions – Rev 1.1