Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
PGEB Breathable
Protective Glaze for Earth Bricks Waterproof
What is it for?
The protective glaze for earth bricks or PGEB
allows for preservation of earth walls and exists
in two versions - for interior walls and exterior
walls.
The exterior formula is waterproof and
breathable and protects your walls from climatic
stress.
The interior formula is created to reduce
dust and improve the quality of earth structures as
well as easy to clean. It resists stains and dirt.
The PGEB preserves water quality of earth
walls.
For use on renovations and new structures, Avantages
PGEB creates a protective layer on the surface of
bricks and protects the wall from marks and Waterproof and breathable
scratches. Strenghthens the surface
The PGEB is colorless and will not change Makes walls easy to clean
the original aspect of your earth wall. Prevents dust
How does it work?
Characteristics
Interior Exterior
Protects against water.
Strengthens earth structures.
Blocks dust Protects Resistant to marks, dirt and pollution.
against rain Severely limits efflorescence.
Long durability (tested under a XENON lampe
for 1000 hours).
Breathe
Breathe
Consumption
Consumption depends on the porosity of the material, and is 6 to 8 m² / litre, meaning 30 to 40 m²/container
MecoConcept - 10 avenue de l’Europe, 31520 Ramonville Saint Agne - +33 (0)5 34 32 04 21 – contact@mecoconcept.com
SAS au Capital de 106 610 € - RCS TOULOUSE – Siret : 508 221 405 00014 – APE 7490B – TVA intracommunautaire : FR88508221405
Washable
PGEB Breathable
Protective Glaze for Earth Bricks Waterproof
Storage :
Description Temperature between 5°C and 30°C.
Conservation : 12 months from the date of
fabrication, in the original unopened package.
Waterproof protective product to stregthen earth
Application : Vertical and horizontal earthen
structures. For use in interior and exterior.
surfaces.
Chemical composition = mixture of potassium
silicate and potassium methylsiliconate.
Surface conditions :
pH = 11.5 +/- 0.5 _ Density >1 _ COV < 1g/L
Make sure the surface is clean and dust-free
The application, preparation and supports must
comply with DTU, 59.1 (Painting Work).
Saftey Guidelines -Remove any excess product after application.
Product :
Irritating to eyes and skin. Recommended temperature before application :
In case of contact with eyes, rinse immediately 20 +/- 5°C
with plenty of water and seek medical advice.
Wear suitable gloves. Surface :
Dispose of according to local regulations. Surface humidity : less than or equal to 20%
humidity.
Ideal surface temperature : 15 à 25°C.
Acceptable temperature of the surface : 10 à 30°C.
Clean and dust-free surface.
Weather conditions :
Do not apply the product in the rain or when it is
very hot.
Ideal air temperature : 10°C to 30°C.
Air humidity : between 40 and 80%.
MecoConcept - 10 avenue de l’Europe, 31520 Ramonville Saint Agne - +33 (0)5 34 32 04 21 – contact@mecoconcept.com
SAS au Capital de 106 610 € - RCS TOULOUSE – Siret : 508 221 405 00014 – APE 7490B – TVA intracommunautaire : FR88508221405