Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Sethco
MODEL P90
P 90
DRUM PUMP
SEALLESS
DRUM PUMPS
FOR SAFE AND FAST
TRANSFER OF
CHEMICALS • SOLVENTS
• CORROSIVE LIQUIDS IN
HAZARDOUS OR
NON HAZARDOUS
ENVIRONMENTS
Sethco Division
SETHCO MODEL P-90 DRUM PUMPS
THE RIGHT CHOICE FOR TRANSFERRING CORROSIVE LIQUIDS FROM CARBOYS, DRUMS, VATS, TANKS OR ANY OTHER CONTAINER
• Hazardous duty
• Wide vane axial impeller and air motor also
Efficiently moves high viscosity and
specific gravity liquids up to available
4000 ssu. For safe transfer of
hazardous, flammable
or combustible liquids.
• High flow
Empties a 55 gallon drum in less
than 2 minutes. Empties a 500 • Lightweight
gallon tank in less than 13 minutes. Weighs only 9 pounds.
• Easy to maintain
New bearing cup design allows fast,
inexpensive, easy to do repairs.
No special tools needed.
SELECT FROM 3 HIGH POWER INTERCHANGEABLE MOTORS
High-Power Double Insulated Hazardous Duty Electric Motor Hazardous Duty Air Motor
1150 Watt Motor UL Listed, 650 watt motor is specifically Can be used in place of electric motor
Lightweight, impact resistant and easy designed to be used with the Sethco when desired. Completely interchange-
to handle, this motor is the most widely stainless steel P90 pump to safely trans- able on any P90 pump. Recommended
used. Select this motor when transfer- fer hazardous flammable or combustible for use in areas where flammable
ring liquids that are non-hazardous. Can liquids. Can also be used with Sethco vapors or other hazardous duty condi-
be used with any P90 pump tube. Kynar P90 pump to transfer non- tions exist.
flammable chemicals in a hazardous
environment.
30”, 40”
50” and 60”
Standard
Pump Tube
Lengths
6 MONTH
WARRANTY!
Twice the length
of most other
drum pumps
40 40
12 12
35 EL 35
EC
10 TR 10
30 IC 30 HA
/H ZA
AZ RD
8 AR 8 OU
25 25 S
DO DU
U S TY
6 20 DU 6 20 M
TY OT
O
AI R
15 15 AI
M
R 4 R
O
4 MO
TO
TO MO
10 TO
R
10 R R
2 2 5
5
0 0
5 10 15 20 25 30 35 40 45 GPM 5 10 15 20 25 30 35 40 45 GPM
0 20 40 60 80 100 120 140 160 LPM 0 20 40 60 80 100 120 140 160 LPM
TEST FLUID — WATER AT 70°F (21°C) TEST FLUID — WATER AT 70°F (21°C)
ACCESSORIES
Flow
Totalizer
Accuately
measures the
flow of liquid.
NEW!
No more
guessing.
Easy to
install and
runs on
2 AAA
batteries. Hand Flow Regulator Vinyl Hose
Safe, leakproof, automatic flow Clear, pliable, corrosion
control. The “easy squeeze” resistant. For use with most
hand lever permits controlled acids and alkalies and water
flow of corrosive liquids. Sethco base solutions. 10 ft. of vinyl
hand flow regulators are hose is supplied with each
optional and available in complete polypropylene P90
polypropylene, aluminum or pump and motor.
stainless steel construction.
PUMP TUBES
Tube Maximum Shipping
Maximum
Diameter Flow Maximum Specific Maximum Net Weight
Tube
Length* Wetted (at widest point) Discharge (water at Head Gravity** Viscosity** Weight w/o Hose
MODEL (in / cm) Materials (in / cm) (in / cm) 70°F / 21°C) Gravity** (reduced flow and pressure) (lbs. / kg) (lbs. / kg)
MOTORS
WARRANTY
180 day warranty against defective parts and workmanship. The standard warranty does not apply when equipment is used contrary to
factory recommendations.
Since the policy of Sethco is one of continual improvement, we reserve the right to change design or materials at any time without giving notice
or creating any obligation to previous or future customers.
We asked our customers how they use their Sethco
drum pump and this is what some of them said....
“
Electronics & Printed Circuits Industrial Cleaners
• Pumping acids at 70° to 130°F for • Transferring sanitary chemicals, filling
printed circuit fabrication. small containers with liquid floor.
Plating Shops • Transferring acids into tanks 10-15 polishes, liquid detergents, etc.
• Transferring nitric, sulfuric, muriatic feet away. • Pumping alkaline cleaning chemicals.
and hydrofluoric acid. • Handling ferric chloride and sodium • Mixing liquid soaps.
• Emptying spent metal finishing acids persulfate for etching.
and alkalies at 32°F to 130°F.
• Emptying liquid nickel sulfate from 55 Pulp and Paper
gallon drums into smaller pails. Grain Processing Manufacturing
• Transferring cyanide zinc @ 90°F • Moving surfactants at 90°F in grain • Pumping sulphuric acid up 8’.
safely and economically. processing. • Transferring ammonia in processing
• Plating solutions at room tempera- pulp and paper.
ture pumped 20 feet across and • Moving ammonia and latex 15’
5 feet up. across plant and up to 10’ in paper
• Transferring phosphoric, nitric and and pulp processing.
sulfuric acids into small tanks.
• Mixing and transferring aluminum
brighteners. Electrical Power
• Emptying copper, cadmium and and Utility Companies
silver cyanide; ferric chloride, • Transferring acids from drums and
copper sulfate, tin lead, ferric Latex and Rubber carboys.
chloride, copper fluoborate and • Transferring styrene across the shop. • Handling 35% hydrazine for electric
nickel sulfamate at 65° to 150°F. • Transferring from drums to mixer in generators.
”
• Reactivating anodizing solution with water paint manufacture. • Hazardous chemical disposal from 55
sulfuric and chromic acids. • Pumping 20% muriatic acid at 80°F gallon drum to a reactor tank.
• Pumping out hot cleaners for rubber processing.
with alkali.
Photo Processing
Industrial Chemicals • Transferring ammonia thiosulphate
• Packaging acids and alkalies in for photo processing.
bottles. • Pumping ethylene glycol, methanol,
• Pumping acids up to the floor above. ammonium, thyocyanate, NaOH.
• Transferring viscous wool oil from
drum to hoppers. Plus hundreds of other enthusiastic
• Pumping out hot cleaners with alkali. Waste and Water Treatment replies from hospitals, institutions,
• Filling small containers of industrial • Pumping treatment chemicals, caustic laboratories, universities, photo
chemicals from carboys and drums soda, sodium hypochlorite, sodium processors, chemical suppliers,
for retail sales. metabisulfite and sulfuric acid into industrial cleaner packagers, food
• Mixing and transferring hot caustics. reagent tanks. processors, beverage canners,
• Emptying 55 gallon drums of • Pumping ferric chloride for floculation and the manufacturers of mirrors,
hydroflouric acid without hoisting of solids. automotive parts, aerospace
them into 5 gallon containers. components, fiberglass and more.
©COPYRIGHT 2006 MET-PRO CORPORATION, SETHCO DIVISION Sethco Division ® IS A REGISTERED TRADEMARK OF MET-PRO CORPORATION 12-06
Sethco Division
800 Emlen Way, Telford, PA 18969
Tel: 800-645-0500 • Fax: 215-799-0920
Website: www.sethco.com • E-mail: info@sethco.com
West Coast Office: 230 N. Crescent Way, Unit I, Anaheim, CA 92801 • Tel: 714-991-0270 • Fax: 714-991-8107