Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Crane Boom
Unit : m
61.0 m Boom 64
57.9 m Boom
60
54.9 m Boom
56
51.8 m Boom
48.8 m Boom 52
45.7 m Boom
48
42.7 m Boom
44
39.6 m Boom
33.5 m Boom
36
30.5 m Boom
32
27.4 m Boom
24.4 m Boom 28
21.3 m Boom
24
18.3 m Boom
20
15.2 m Boom
16
4 8 12 16 20 24 28 32 36 40 44 48 52 56
Center
of rotation
1.4 m
10
WORKING RANGES
30˚ Unit : m
10˚
92
84
61.0 m Boom + 18.3 m Jib
80
72
68
64
60
24.4 m Boom + 30.5 m Jib
56
48
24.4 m Boom + 18.3 m Jib
44
40
24.4 m Boom + 12.2 m Jib
36
32
28
80˚
24
20
30˚
4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68
Center
of rotation
1.4 m
11
Long Boom
Unit : m
76.2 m Boom 80
73.2 m Boom 76
70.1 m Boom
72
67.1 m Boom
64.0 m Boom 68
61.0 m Boom 64
60
56
52
48
40
36
32
12 16 20 24 28 32 36 40 44 48 52 56 60 64
Center
of rotation
1.4 m
12
WORKING RANGES
Tower Jib
Tower Length: 39.5 m
Unit : m
90
85
75˚
80
35.1 m Jib 65˚
32.0 m Jib 75
55˚
29.0 m Jib
70
25.9 m Jib
22.9 m Jib
65
45˚
60
15˚
15˚ 55
1.8 m
15˚
15˚
45
40
35
90˚ 30
25
80˚
20
70˚
15
60˚
10
0
5 10 15 20 25 30 35 40 45 50 55 60 65
Center
2.53 m
1.4 m
13
Tower Jib
Tower Length: 51.7 m
Unit : m
35.1 m Jib 90
55˚
32.0 m Jib
85
29.0 m Jib
75
15˚
15˚ 70
1.8 m
15˚
65
60
15˚
55
45
40
35
90˚
30
25
80˚
20
70˚
15
60˚
10
0
5 10 15 20 25 30 35 40 45 50 55 60 65 70 75
2.53 m
Center
of rotation Radius from center of rotation (m)
1.4 m
14
SUPPLEMENTAL DATA
· Ratings according to Japanese Construction Codes for Mobile <Reference Information>
Cranes. Main hoist loads
No. of Parts of Line 1 2 3 4 5
· Operating radius is the horizontal distance from centerline of
Maximum Loads (kN) 118 235 353 471 588
rotation to a vertical line through the center of gravity of the Maximum Loads (t) 12.0 24.0 36.0 48.0 60.0
load.
No. of Parts of Line 6 7 8 9 10
· Deduct weight of hook block (s), slings and all other load Maximum Loads (kN) 706 824 941 1,059 1,177
Maximum Loads (t) 72.0 84.0 96.0 108.0 120.0
handling accessories from main boom ratings shown.
· Ratings shown are based on freely suspended loads and make Auxiliary hoist loads
No. of Parts of Line 1
no allowance for such factors as wind effect on lifted load,
Maximum Loads (kN) 118
ground conditions, out-of-level, operating speeds or any other Maximum Loads (t) 12.0
condition that could be detrimental to the safe operation of
Weight of hook block
this equipment. The operator, therefore, has the responsibility
Hook Block 120 t 70 t 35 t Ball Hook
to judge the existing conditions and reduce lifted loads and Weight (t) 1.7 1.2 0.9 0.45
operating speeds accordingly.
· Ratings are for operation on a firm and level surface, up to 1%
gradient. (Fixed jib lifting)
· At radii and boom lengths where no ratings are shown on · The total load that can be lifted is the value for weight of jib
chart, operation is not intended nor approved. hook block, slings, and all other load handling accessories
· Boom inserts and guy lines must be arranged as shown in the deducted from fixed jib ratings shown.
“Operator's Manual”. · The availability of fixed jib mounting
· Boom hoist reeving is 12 part line. - on crane boom : range 24.4 m to 61.0 m.
· Gantry must be in raised position for all conditions. · One part of line on hook is not allowed to use for 12.2 m jib
length with offset angle 10 degrees.
· Boom backstops are required for all boom lengths.
Operation of this equipment in excess of rated loads
· The boom should be erected over the front of the crawlers, not or disregard of instruction voids the warranty.
laterally.
· Ratings inside of boxes are limited by strength of
materials.
· The minimum rated load is 2.0 (ton).
15
LIFTING CAPACITIES
Boom Boom
length length
Working (m) 39.6 42.7 45.7 48.8 51.8 54.9 57.9 61.0 (m) Working
radius (m) radius (m)
16
LIFTING CAPACITIES
Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 53.1 t
(Jib Offset Angle : 10°) Unit: metric ton
Boom length (m) 24.4 27.4 30.5 Boom length (m)
Jib length (m) 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 Jib length (m)
30.0 12.0 11.0 6.4 3.7 11.8 11.7 6.6 3.8 11.7 11.9 6.8 3.9 30.0
32.0 11.1 10.3 6.2 3.5 10.8 11.0 6.4 3.6 10.6 10.9 6.5 3.7 32.0
34.0 10.2 9.7 6.0 3.4 9.9 10.1 6.2 3.5 9.8 10.0 6.3 3.6 34.0
36.0 9.2 5.8 3.2 9.2 9.4 6.0 3.3 9.0 9.2 6.1 3.4 36.0
38.0 8.7 5.6 3.1 8.7 5.8 3.2 8.3 8.5 5.9 3.3 38.0
40.0 8.3 5.5 3.0 8.1 5.6 3.1 7.9 5.8 3.2 40.0
42.0 5.3 2.9 7.5 5.5 3.0 7.3 5.6 3.1 42.0
44.0 5.2 2.8 5.4 2.9 6.9 5.5 3.0 44.0
46.0 2.7 5.2 2.8 5.4 2.9 46.0
48.0 2.6 5.2 2.7 5.3 2.8 48.0
50.0 2.6 2.6 5.2 2.7 50.0
52.0 2.6 2.6 52.0
54.0 2.6 54.0
56.0 2.5 56.0
Reeves 1 1 1 1 1 1 1 1 1 1 1 1 Reeves
Jib length (m) 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 Jib length (m)
34.0 9.6 9.8 6.5 3.7 9.4 9.6 6.6 3.8 9.2 9.4 6.8 3.9 34.0
36.0 8.8 9.0 6.3 3.5 8.6 8.8 6.4 3.6 8.4 8.7 6.6 3.7 36.0
38.0 8.1 8.3 6.1 3.4 7.9 8.1 6.2 3.5 7.8 8.0 6.4 3.6 38.0
40.0 7.5 7.7 5.9 3.3 7.3 7.5 6.1 3.4 7.1 7.3 6.2 3.5 40.0
42.0 7.0 7.2 5.8 3.2 6.8 6.9 5.9 3.3 6.6 6.8 6.0 3.4 42.0
44.0 6.7 5.6 3.1 6.3 6.4 5.8 3.2 6.1 6.3 5.9 3.2 44.0
46.0 6.2 5.5 3.0 6.0 5.6 3.1 5.7 5.8 5.8 3.1 46.0
48.0 5.4 2.9 5.6 5.5 3.0 5.4 5.6 3.0 48.0
50.0 5.3 2.8 5.2 5.4 2.9 5.1 5.3 3.0 50.0
52.0 5.2 2.7 5.1 2.8 4.7 4.9 2.9 52.0
54.0 2.7 4.7 2.7 4.6 2.8 54.0
56.0 2.6 4.5 2.7 4.3 2.7 56.0
58.0 2.5 2.6 4.0 2.7 58.0
60.0 2.5 2.6 60.0
62.0 2.6 62.0
64.0 2.5 64.0
Reeves 1 1 1 1 1 1 1 1 1 1 1 1 Reeves
Note:
Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc.
Ratings shown in are determined by the strength of the boom or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator's cabin.
17
Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 53.1 t
(Jib Offset Angle : 10°) Unit: metric ton
Boom length (m) 42.7 45.7 48.8 Boom length (m)
Jib length (m) 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 Jib length (m)
38.0 7.6 7.8 6.5 3.7 7.3 7.6 6.7 3.8 7.2 7.4 6.8 3.8 38.0
40.0 7.0 7.2 6.3 3.6 6.7 7.0 6.5 3.6 6.6 6.8 6.6 3.7 40.0
42.0 6.4 6.6 6.2 3.4 6.2 6.4 6.3 3.5 6.0 6.2 6.4 3.6 42.0
44.0 5.9 6.1 6.0 3.3 5.7 5.9 6.2 3.4 5.5 5.7 6.0 3.5 44.0
46.0 5.5 5.7 5.9 3.2 5.2 5.4 5.7 3.3 5.1 5.3 5.6 3.4 46.0
48.0 5.1 5.2 5.5 3.1 4.8 5.0 5.3 3.2 4.7 4.9 5.1 3.3 48.0
50.0 4.7 4.9 5.1 3.0 4.5 4.6 4.9 3.1 4.3 4.5 4.8 3.2 50.0
52.0 4.5 4.8 3.0 4.1 4.3 4.5 3.0 4.0 4.1 4.4 3.1 52.0
54.0 4.2 4.4 2.9 4.0 4.2 2.9 3.6 3.8 4.1 3.0 54.0
56.0 4.1 2.8 3.7 3.9 2.9 3.5 3.8 2.9 56.0
58.0 3.9 2.7 3.4 3.6 2.8 3.2 3.5 2.9 58.0
60.0 3.6 2.7 3.4 2.7 2.9 3.2 2.8 60.0
62.0 2.6 3.1 2.7 2.9 2.7 62.0
64.0 2.6 2.9 2.6 2.6 2.7 64.0
66.0 2.5 2.6 2.4 2.5 66.0
68.0 2.5 2.3 68.0
70.0 2.1 70.0
Reeves 1 1 1 1 1 1 1 1 1 1 1 1 Reeves
Jib length (m) 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 Jib length (m)
38.0 7.0 7.3 6.9 3.9 6.8 7.1 7.0 4.0 6.6 6.9 7.1 4.0 38.0
40.0 6.4 6.6 6.7 3.8 6.2 6.4 6.8 3.9 6.0 6.2 6.6 3.9 40.0
42.0 5.9 6.1 6.4 3.7 5.6 5.9 6.2 3.7 5.5 5.7 6.0 3.8 42.0
44.0 5.4 5.6 5.9 3.6 5.1 5.4 5.7 3.6 4.9 5.2 5.5 3.7 44.0
46.0 4.9 5.1 5.4 3.4 4.7 4.9 5.2 3.5 4.5 4.7 5.0 3.6 46.0
48.0 4.5 4.7 5.0 3.4 4.3 4.5 4.8 3.4 4.0 4.3 4.6 3.5 48.0
50.0 4.1 4.3 4.6 3.3 3.8 4.1 4.4 3.3 3.6 3.9 4.2 3.4 50.0
52.0 3.7 4.0 4.2 3.2 3.4 3.7 4.0 3.2 3.2 3.4 3.9 3.3 52.0
54.0 3.4 3.6 3.9 3.1 3.0 3.3 3.7 3.2 2.8 3.1 3.5 3.2 54.0
56.0 3.0 3.3 3.6 3.0 2.7 3.0 3.3 3.1 2.4 2.7 3.1 3.1 56.0
58.0 2.9 3.3 2.9 2.4 2.6 3.0 3.0 2.1 2.4 2.8 2.9 58.0
60.0 2.6 3.0 2.9 2.3 2.7 2.8 2.1 2.4 2.6 60.0
62.0 2.4 2.7 2.8 2.1 2.4 2.5 2.2 2.3 62.0
64.0 2.4 2.5 2.1 2.3 2.0 64.0
66.0 2.2 2.3 2.0 66.0
68.0 2.0 68.0
Reeves 1 1 1 1 1 1 1 1 1 1 1 1 Reeves
Note:
Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc.
Ratings shown in are determined by the strength of the boom or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator's cabin.
18
LIFTING CAPACITIES
Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 53.1 t
(Jib Offset Angle : 10°) Unit: metric ton
Boom length (m) 61.0 Boom length (m)
Jib length (m) 12.2 18.3 24.4 30.5 Jib length (m)
19
Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 53.1 t
(Jib Offset Angle : 30°) Unit: metric ton
Boom length (m) 24.4 27.4 30.5 Boom length (m)
Jib length (m) 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 Jib length (m)
32.0 10.0 7.9 5.5 3.0 10.0 8.2 5.6 3.0 10.0 8.5 5.7 3.0 32.0
34.0 10.0 7.6 5.4 2.9 10.0 7.9 5.5 3.0 9.9 8.1 5.6 3.0 34.0
36.0 7.3 5.3 2.8 9.3 7.6 5.4 2.9 9.1 7.8 5.5 2.9 36.0
38.0 7.1 5.2 2.7 7.3 5.3 2.8 8.4 7.5 5.4 2.8 38.0
40.0 6.9 5.1 2.7 7.1 5.2 2.7 7.8 7.3 5.3 2.8 40.0
42.0 5.0 2.6 6.9 5.1 2.7 7.1 5.2 2.7 42.0
44.0 4.8 2.6 5.0 2.6 7.0 5.1 2.6 44.0
46.0 4.7 2.5 4.8 2.5 6.5 5.0 2.6 46.0
48.0 2.5 4.7 2.5 4.8 2.5 48.0
50.0 2.4 2.5 4.8 2.5 50.0
52.0 2.4 2.4 4.7 2.5 52.0
54.0 2.4 2.4 54.0
56.0 2.4 56.0
58.0 2.4 58.0
Reeves 1 1 1 1 1 1 1 1 1 1 1 1 Reeves
Jib length (m) 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 Jib length (m)
38.0 8.3 7.8 5.4 2.9 8.1 8.0 5.5 2.9 7.9 8.2 5.5 3.0 38.0
40.0 7.6 7.5 5.3 2.8 7.4 7.8 5.4 2.8 7.3 7.7 5.4 2.9 40.0
42.0 7.1 7.3 5.2 2.7 6.9 7.3 5.3 2.8 6.7 7.1 5.4 2.8 42.0
44.0 6.9 5.2 2.7 6.3 6.7 5.2 2.7 6.2 6.6 5.3 2.7 44.0
46.0 6.4 5.1 2.6 6.2 5.2 2.7 5.7 6.1 5.2 2.7 46.0
48.0 6.0 5.0 2.6 5.8 5.1 2.6 5.3 5.7 5.2 2.6 48.0
50.0 4.9 2.5 5.4 5.0 2.6 5.3 5.1 2.6 50.0
52.0 4.8 2.5 4.9 2.5 4.9 5.0 2.5 52.0
54.0 4.7 2.5 4.8 2.5 4.5 4.8 2.5 54.0
56.0 2.4 4.6 2.5 4.5 2.5 56.0
58.0 2.4 2.4 4.1 2.5 58.0
60.0 2.4 2.4 3.9 2.4 60.0
62.0 2.4 2.4 62.0
64.0 2.4 64.0
66.0 2.4 66.0
Reeves 1 1 1 1 1 1 1 1 1 1 1 1 Reeves
Note:
Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc.
Ratings shown in are determined by the strength of the boom or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator's cabin.
20
LIFTING CAPACITIES
Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 53.1 t
(Jib Offset Angle : 30°) Unit: metric ton
Boom length (m) 42.7 45.7 48.8 Boom length (m)
Jib length (m) 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 Jib length (m)
42.0 6.6 7.0 5.4 2.8 6.4 6.8 5.5 2.9 6.2 6.7 5.5 2.9 42.0
44.0 6.1 6.5 5.3 2.8 5.8 6.3 5.4 2.8 5.7 6.2 5.4 2.8 44.0
46.0 5.6 6.0 5.3 2.7 5.4 5.8 5.3 2.8 5.2 5.7 5.4 2.8 46.0
48.0 5.1 5.5 5.2 2.7 4.9 5.3 5.2 2.7 4.8 5.2 5.3 2.7 48.0
50.0 4.8 5.1 5.1 2.6 4.6 4.9 5.2 2.7 4.4 4.8 5.1 2.7 50.0
52.0 4.7 5.0 2.6 4.2 4.6 4.8 2.6 4.1 4.4 4.7 2.6 52.0
54.0 4.4 4.6 2.5 4.2 4.5 2.6 3.7 4.1 4.4 2.6 54.0
56.0 4.1 4.3 2.5 3.9 4.1 2.5 3.4 3.8 4.0 2.6 56.0
58.0 4.0 2.5 3.6 3.8 2.5 3.5 3.7 2.5 58.0
60.0 3.7 2.4 3.6 2.5 3.1 3.4 2.5 60.0
62.0 3.5 2.4 3.3 2.4 2.8 3.2 2.5 62.0
64.0 2.4 3.0 2.4 2.8 2.4 64.0
66.0 2.4 2.4 2.6 2.4 66.0
68.0 2.4 2.4 2.3 2.4 68.0
70.0 2.4 2.3 70.0
72.0 2.1 72.0
Reeves 1 1 1 1 1 1 1 1 1 1 1 1 Reeves
Jib length (m) 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 12.2 18.3 24.4 30.5 Jib length (m)
42.0 6.1 6.6 5.6 2.9 5.9 6.4 5.6 3.0 5.7 6.3 5.7 3.0 42.0
44.0 5.6 6.0 5.5 2.9 5.4 5.9 5.5 2.9 5.2 5.7 5.6 2.9 44.0
46.0 5.1 5.5 5.4 2.8 4.9 5.4 5.5 2.8 4.7 5.2 5.5 2.9 46.0
48.0 4.7 5.1 5.3 2.8 4.5 4.9 5.2 2.8 4.3 4.8 5.1 2.8 48.0
50.0 4.3 4.7 5.0 2.7 4.1 4.5 4.8 2.7 3.8 4.4 4.7 2.8 50.0
52.0 3.9 4.3 4.6 2.7 3.6 4.1 4.4 2.7 3.4 4.0 4.3 2.7 52.0
54.0 3.5 4.0 4.2 2.6 3.2 3.8 4.1 2.6 3.0 3.6 3.9 2.7 54.0
56.0 3.1 3.6 3.9 2.6 2.8 3.4 3.7 2.6 2.6 3.2 3.6 2.6 56.0
58.0 2.8 3.3 3.6 2.5 2.5 3.0 3.4 2.6 2.3 2.8 3.2 2.6 58.0
60.0 2.9 3.3 2.5 2.2 2.7 3.1 2.5 2.0 2.5 2.9 2.6 60.0
62.0 2.6 3.0 2.5 2.4 2.7 2.5 2.2 2.5 2.5 62.0
64.0 2.3 2.7 2.5 2.1 2.4 2.5 2.2 2.5 64.0
66.0 2.4 2.4 2.1 2.4 2.2 66.0
68.0 2.1 2.4 2.1 68.0
70.0 2.1 70.0
Reeves 1 1 1 1 1 1 1 1 1 1 1 1 Reeves
Note:
Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc.
Ratings shown in are determined by the strength of the boom or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator's cabin.
21
Fixed Jib Lifting Capacities (Without Main Hook Block) Counterweight: 53.1 t
(Jib Offset Angle : 30°) Unit: metric ton
Boom length (m) 61.0 Boom length (m)
Jib length (m) 12.2 18.3 24.4 30.5 Jib length (m)
22
LIFTING CAPACITIES
23
SUPPLEMENTAL DATA
· Ratings according to Japanese Construction Codes for Mobile Tower and jib combinations
Cranes. Jib Length (m)
22.9 25.9 29.0 32.0 35.1 38.1 41.1 44.2
· Operating radius is the horizontal distance from centerline of
30.4 ○* ○ × × × × × ×
rotation to a vertical line through the center of gravity of the 33.4 ○* ○ ○ × × × × ×
· Tower and jib backstops are required for all tower and jib
combinations.
· Ratings inside of boxes are limited by strength of
materials.
· The tower should be erected over the front of the crawlers, not
laterally.
· When erecting and lowering the tower length of 51.7 m, the
blocks for erection must be placed at the end of the crawlers.
· The minimum rated load is 2.0 (ton).
· The total load that can be lifted is the value for weight of hook
block, slings, and all other load handling accessories deducted
from tower jib ratings shown.
· One part of line on hook is not allowed to use for 22.9 m jib
length.
24
LIFTING CAPACITIES
25
Tower Jib Lifting Capacities Counterweight: 53.1 t
Unit: metric ton
Tower length (m) 36.5 Tower length (m)
36.5 m Tower Length
Jib length (m) 22.9 25.9 29.0 32.0 Jib length (m)
Tower angle 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° Tower angle
9.4 20.0 9.4
10.0 20.0 10.2m/20.0 11.0m/20.0 11.8m/20.0 10.0
12.0 20.0 20.0 20.0 20.0 12.0
14.0 20.0 20.0 20.0 19.6 14.0
15.0 20.0 20.0 20.0 19.1 15.0
16.0 18.7 18.7 18.7 18.6 16.0
18.0 16.6 19.4m/15.4 16.6 16.6 16.6 18.0
20.0 15.0 15.0 15.0 20.7m/14.4 15.0 15.0 20.0
22.0 13.5 13.6 13.6 13.6 13.6 13.6 13.6 23.3m/12.8 22.0
24.0 10.1 12.5 12.4 12.5 12.5 12.5 12.5 12.5 24.0
26.0 25.4m/7.3 11.5 9.8 11.5 11.2 11.5 11.5 11.5 26.0
Working radius (m)
Jib length (m) 22.9 25.9 29.0 32.0 35.1 Jib length (m)
Tower angle 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° Tower angle
9.4 20.0 9.4
10.0 20.0 10.2m/20.0 11.0m/20.0 11.8m/20.0 10.0
12.0 20.0 20.0 20.0 20.0 12.5m/16.5 12.0
14.0 20.0 20.0 20.0 19.6 16.3 14.0
15.0 20.0 20.0 20.0 19.1 16.0 15.0
16.0 18.7 18.7 18.7 18.6 15.7 16.0
18.0 16.6 16.6 16.6 16.6 15.3 18.0
20.0 15.0 15.0 15.0 21.2m/14.1 15.0 15.0 14.9 20.0
22.0 13.6 13.6 13.6 13.6 13.6 22.5m/13.3 13.6 23.8m/12.6 13.6 22.0
24.0 10.2 12.5 12.4 12.5 12.5 12.5 12.5 12.5 12.5 25.1m/11.9 24.0
26.0 25.4m/7.4 11.5 9.8 11.5 11.3 11.5 11.5 11.5 11.5 11.5 26.0
28.0 10.7 7.0 10.7 9.3 10.7 10.2 10.7 10.7 10.7 28.0
Working radius (m)
30.0 10.0 10.0 28.3m/6.3 10.0 31.7m/9.4 7.2 10.0 8.6 10.0 9.4 10.0 30.0
32.0 9.3 9.3 9.3 9.2 31.2m/5.4 9.3 33.5m/8.6 6.9 9.3 8.0 9.3 32.0
34.0 32.2m/9.3 8.7 8.8 8.6 8.8 8.4 5.0 8.8 35.2m/8.0 6.7 8.8 34.0
36.0 8.1 35.1m/8.2 8.0 8.3 7.9 34.2m/4.7 8.3 7.7 5.2 8.3 36.9m/7.4 36.0
38.0 7.5 39.1m/6.0 7.5 7.5 7.3 7.8 7.2 37.1m/4.1 7.8 7.0 38.0
40.0 38.8m/7.3 5.7 7.0 41.2m/5.3 38.1m/7.1 6.9 7.4 6.8 7.5 6.7 40.0
42.0 5.4 41.7m/6.5 5.2 6.4 43.4m/4.7 41.0m/6.2 6.3 7.1 6.3 42.0
44.0 5.1 5.0 6.0 4.7 6.0 45.5m/4.3 5.4 5.9 44.0
46.0 44.9m/4.8 4.7 44.6m/5.9 4.5 5.6 4.3 5.5 47.7m/4.0 46.0
48.0 47.8m/4.4 4.3 47.6m/5.3 4.2 5.2 4.0 48.0
50.0 4.0 3.9 4.9 3.8 50.0
52.0 50.8m/3.9 3.7 50.5m/4.8 3.6 52.0
54.0 53.7m/3.5 3.4 54.0
56.0 3.2 56.0
58.0 56.6m/3.1 58.0
Reeves 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Reeves
Note:
Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc.
Ratings shown in are determined by the strength of the tower or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator's cabin.
26
LIFTING CAPACITIES
27
Tower Jib Lifting Capacities Counterweight: 53.1 t
Unit: metric ton
Tower length (m) 45.6 Tower length (m)
45.6 m Tower Length
Jib length (m) 22.9 25.9 29.0 32.0 Jib length (m)
Tower angle 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° Tower angle
9.4 20.0 9.4
10.0 20.0 10.2m/20.0 11.0m/20.0 11.8m/20.0 10.0
12.0 20.0 20.0 20.0 20.0 12.0
14.0 20.0 20.0 20.0 19.5 14.0
15.0 20.0 20.0 20.0 19.0 15.0
16.0 18.7 18.7 18.7 18.5 16.0
18.0 16.6 16.6 16.6 16.6 18.0
20.0 15.0 21.0m/14.2 15.0 15.0 15.0 20.0
22.0 13.6 13.6 13.6 22.3m/13.4 13.6 23.6m/12.7 13.6 22.0
24.0 10.3 12.5 12.5 12.5 12.5 12.5 12.5 24.9m/12.0 24.0
26.0 25.4m/7.5 11.5 9.9 11.5 11.3 11.5 11.5 11.5 26.0
28.0 10.7 7.1 10.7 9.3 10.7 10.3 10.7 28.0
Working radius (m)
Jib length (m) 22.9 25.9 29.0 32.0 Jib length (m)
Tower angle 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° Tower angle
9.4 20.0 9.4
10.0 20.0 10.2m/20.0 11.0m/20.0 11.8m/19.9 10.0
12.0 20.0 20.0 20.0 19.9 12.0
14.0 20.0 20.0 19.5 18.6 14.0
15.0 20.0 19.8 18.9 18.0 15.0
16.0 18.7 18.7 18.3 17.5 16.0
18.0 16.6 16.6 16.6 16.5 18.0
20.0 15.0 21.5m/13.9 15.0 15.0 15.0 20.0
22.0 13.6 13.6 13.6 22.8m/13.1 13.6 13.6 22.0
24.0 10.4 12.5 12.5 12.5 12.5 24.1m/12.4 12.5 25.4m/11.8 24.0
26.0 25.4m/7.5 11.5 10.0 11.5 11.4 11.5 11.5 11.5 26.0
28.0 10.7 7.1 10.7 9.4 10.7 10.3 10.7 28.0
Working radius (m)
34.0 6.7 8.8 7.4 8.8 7.3 8.8 6.4 7.6 34.0
36.0 5.3 8.3 6.3 8.3 6.8 8.3 6.0 7.3 36.0
38.0 37.1m/4.1 7.8 5.1 7.8 6.2 7.8 5.6 7.1 38.0
40.0 7.5 40.1m/5.7 3.8 7.5 41.8m/5.2 5.2 7.3 5.2 6.9 40.0
42.0 7.1 5.3 40.1m/3.5 6.9 5.2 4.1 6.8 43.6m/4.8 4.8 6.7 42.0
44.0 6.5 5.1 6.5 5.0 43.0m/3.2 6.4 4.7 4.0 6.2 45.3m/4.4 44.0
46.0 45.6m/5.4 4.8 6.0 4.7 5.9 4.6 2.8 5.8 4.3 46.0
48.0 4.5 5.5 4.4 5.5 4.3 5.5 4.1 48.0
50.0 4.2 48.5m/4.7 4.1 5.1 4.0 5.1 3.9 50.0
52.0 4.0 52.3m/2.4 3.8 51.4m/4.3 3.7 4.7 3.6 52.0
54.0 53.7m/3.5 2.3 3.6 3.5 4.3 3.4 54.0
56.0 2.2 3.4 3.3 54.4m/3.8 3.1 56.0
58.0 2.1 56.6m/3.3 3.0 2.9 58.0
60.0 2.0 59.6m/2.8 2.7 60.0
62.0 2.5 62.0
64.0 62.5m/2.4 64.0
Reeves 2 2 2 2 2 2 2 2 2 2 2 2 2 Reeves
Note:
Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc.
Ratings shown in are determined by the strength of the tower or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator's cabin.
29
Tower Jib Lifting Capacities Counterweight: 53.1 t
Unit: metric ton
Tower length (m) 51.7 Tower length (m)
51.7 m Tower Length
Jib length (m) 22.9 25.9 29.0 32.0 Jib length (m)
Tower angle 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° 90° 80° 70° 60° Tower angle
9.4 20.0 9.4
10.0 20.0 10.2m/20.0 11.0m/20.0 11.8m/18.6 10.0
12.0 20.0 20.0 19.4 18.6 12.0
14.0 20.0 19.2 18.2 17.4 14.0
15.0 20.0 18.6 17.7 16.8 15.0
16.0 18.7 18.1 17.2 16.4 16.0
18.0 16.6 16.6 16.3 15.5 18.0
20.0 15.0 15.0 15.0 14.7 20.0
22.0 13.6 22.1m/13.5 13.6 23.4m/12.8 13.6 13.6 22.0
24.0 10.4 12.5 12.5 12.5 12.5 24.7m/12.1 12.5 25.9m/11.5 24.0
26.0 25.4m/7.6 11.5 10.0 11.5 11.4 11.5 11.5 11.5 26.0
28.0 10.7 7.2 10.7 9.4 10.7 10.3 10.7 28.0
Working radius (m)
34.0 6.8 8.8 7.4 8.5 7.3 7.9 6.4 7.3 34.0
36.0 5.3 8.3 6.3 8.2 6.8 7.6 6.0 7.1 36.0
38.0 37.1m/4.2 7.8 5.2 7.7 6.3 7.4 5.6 6.8 38.0
40.0 7.3 41.1m/4.9 3.8 7.1 5.2 7.0 5.2 6.6 40.0
42.0 6.8 4.9 40.1m/3.5 6.6 42.9m/4.4 4.1 6.5 4.8 6.4 42.0
44.0 6.3 4.8 6.2 4.4 43.0m/3.2 6.1 44.6m/4.2 4.0 5.9 44.0
46.0 5.7 4.5 5.7 4.3 5.7 4.0 2.8 5.5 46.4m/3.8 46.0
48.0 46.1m/5.4 4.2 5.3 4.0 5.3 3.8 5.2 3.6 48.0
50.0 3.9 49.0m/4.7 3.7 4.9 3.6 4.8 3.4 50.0
52.0 3.6 3.5 4.3 3.3 4.5 3.2 52.0
54.0 3.4 3.2 3.1 4.2 3.0 54.0
56.0 54.7m/3.3 3.0 2.9 54.9m/3.8 2.8 56.0
58.0 57.6m/2.8 2.7 2.6 58.0
60.0 2.5 2.4 60.0
62.0 60.6m/2.4 2.2 62.0
64.0 63.5m/2.0 64.0
Reeves 2 2 2 2 2 2 1 1 1 1 1 1 Reeves
Note:
Ratings according to Japanese Construction Codes for Mobile Cranes and Japanese Safety Ordinance on Cranes, etc.
Ratings shown in are determined by the strength of the tower or other structural components.
Lifting capacities may vary depending on hook used or with/without auxiliary sheave.
Please refer rated chart in operator's cabin.
30
GENERAL DIMENSION FOR CLAMSHELL
Clamshell Specification
(Unit: mm)
4,850 1,400
h
θ
7,890
A
2,215
3,620
H
2,525
1,340
6,890
7,895
31
WORKING RANGE FOR CLAMSHELL
Unit: m
24.2 m Boom
45˚
25
21.3 m Boom
40˚
18.3 m Boom
20
35˚
15.2 m Boom
10
5 10 15 20 25
2.5 m
1.4 m
32
SUPPLEMENTAL DATA FOR CLAMSHELL RATING CHART
· Operating radius is the horizontal distance from centerline of (Clamshell bucket lifting)
rotation to a vertical line through the center of gravity of the
· The total load that can be lifted is the value for weight of
load.
bucket, slings, and all other load handling accessories
· Deduct weight of bucket, slings and all other load handling deducted from main boom ratings shown.
accessories from main boom ratings shown.
· The weight of bucket and materials must not exceed rated
· Ratings shown are based on freely suspended loads and make load.
no allowance for such factors as wind effect on lifted load,
· Optimum bucket should be required according to material.
ground conditions, out-of-level, operating speeds or any other
Bucket capacity (m3) x specified gravity of material (ton/m3) +
condition that could be detrimental to the safe operation of
bucket weight (ton) = rated load.
this equipment. The operator, therefore, has the responsibility
to judge the existing conditions and reduce lifted loads and · Bucket weight must also be decreased according to operating
operating speeds accordingly. cycle and bucket lowering height.
· Rated loads do not exceed 66% of minimum tipping loads. · Rated loads are determined by stability and boom strength.
During simultaneous operations of boom and swing, rapid
· Ratings are for operation on a firm and level surface, up to 1%
acceleration or deceleration must be avoided.
gradient.
· Do not attempt to cast the bucket while swinging or diagonal
· At radii and boom lengths where no ratings are shown on
draw-cutting.
chart, operation is not intended nor approved.
· Boom inserts and guy lines must be arranged as shown in the
<Reference Information>
“Operator's Manual”.
Main hoist loads
· Boom hoist reeving is 12 part line. No. of Parts of Line 1
Maximum Loads (kN) 98
· Gantry must be in raised position for all conditions. Maximum Loads (t) 10.0
laterally.
No.6 No.7
No.4 No.5
No.3
No.2
No.1
Counterweights
33
LIFTING CAPACITIES FOR CLAMSHELL
34
SUPPLEMENTAL DATA FOR REDUCED WEIGHTS RATING CHART
· Ratings according to Japanese Construction Codes for Mobile <Reference Information>
Cranes. Main hoist loads
No. of Parts of Line 1 2 3 4 5
· Operating radius is the horizontal distance from centerline of
Maximum Loads (kN) 118 235 353 471 588
rotation to a vertical line through the center of gravity of the Maximum Loads (t) 12.0 24.0 36.0 48.0 60.0
load.
No. of Parts of Line 6 7 8 9 10
· Deduct weight of hook block (s), slings and all other load Maximum Loads (kN) 706 824 941 1,059 1,177
Maximum Loads (t) 72.0 84.0 96.0 108.0 120.0
handling accessories from main boom ratings shown.
· Ratings shown are based on freely suspended loads and make Auxiliary hoist loads
No. of Parts of Line 1
no allowance for such factors as wind effect on lifted load,
Maximum Loads (kN) 118
ground conditions, out-of-level, operating speeds or any other Maximum Loads (t) 12.0
condition that could be detrimental to the safe operation of
Weight of hook block
this equipment. The operator, therefore, has the responsibility
Hook Block 120 t 70 t 35 t Ball Hook
to judge the existing conditions and reduce lifted loads and Weight (t) 1.7 1.2 0.9 0.45
operating speeds accordingly.
· Ratings are for operation on a firm and level surface, up to 1% Assembling the counterweight
45.1 ton counterweight
gradient.
· At radii and boom lengths where no ratings are shown on No.6 No.7
chart, operation is not intended nor approved. No.4 No.5
No.3
· Boom inserts and guy lines must be arranged as shown in the No.2
“Operator's Manual”. No.1
Counterweights
· Boom hoist reeving is 12 part line.
35
LIFTING CAPACITIES FOR REDUCED WEIGHTS
Boom Boom
length length
Working (m) 39.6 42.7 45.7 48.8 51.8 54.9 57.9 61.0 (m) Working
radius (m) radius (m)
36
SUPPLEMENTAL DATA FOR BARGE RATING CHART
·Operating radius is the horizontal distance from centerline of ·Towing area
rotation to a vertical line through the center of gravity of the Towing area shall be within coastal area and quiet wave
load. condition. Offshore and open sea is not considered for this
machinery. Depend on the height of wave, counterweight shall
·Deduct weight of hook block (s), slings and all other load
be reduced during towing.
handling accessories from main boom ratings shown.
·Condition of barge stability this rating chart were determined
(Crane Boom)
under the condition below. The stability of barge shall meet
below condition. During operation the machinery static ·The total load that can be lifted is the value for weight of hook
inclination against horizontal level. block, slings, and all other load handling accessories deducted
(A) Both sides (right & left) of machine from main boom ratings shown.
Maximum inclination shall be within 1.5 degrees
(B) Front & backward of machine <Reference Information>
Maximum inclination shall be within 3.0 degrees
Main hoist loads
Direction of Right and Left No. of Parts of Line 1 2 3 4 5
for Machinery
Maximum Loads (kN) 118 235 353 471 588
Maximum Loads (t) 12.0 24.0 36.0 48.0 60.0
(A) (B)
1.5° Operation of this equipment in excess of rated loads
or disregard of instruction voids the warranty.
1.5° 3°
37
LIFTING CAPACITIES FOR BARGE
Boom Boom
length length
Working (m) 36.6 39.6 42.7 (m) Working
radius (m) radius (m)
38
TRANSPORTATION PLAN
Weight
Name Dimension (mm)
(kg)
Base machine
· Boom base 15,930 2,990*1
· Gantry
15,930 2,990*1
· Wire rope
3,145
3,255
3,215
3,145
3,255
3,215
boom hoist)
· Crane backstop
4,740 2,980
· Without crawler 4,740 2,980
· Without side steps
Base machine
· Gantry
9,025 15,930 2,990*11
2,990*
· Wire rope 9,025 2,990*1
(Front / rear /
3,145
3,255
31,000
3,215
boom hoist)
3,255
3,215
3,255
3,215
· Without crawler
· Without self removal
cylinder 4,740 2,980
4,740 2,980
Base machine
· Without crawler 6,560 2,990*1
1,235
3,145 25,400
(Boom hoist)
3,255
3,215
Crawler
1,235
7,870 1,305
14,500
39
40
41
42
PARTS AND ATTACHMENTS
Base Machine Boom Tip (for Crane) Boom Base (with Tower Backstop)
Boom base, Gantry, Wire rope (Front/rear/boom hoist) Weight: 1,850 kg Weight: 3,100 kg
Crane backstop, Without crawler, Without side steps
5,280 1,530 7,845 1,980
Weight: 34,800 kg Width: 2,990 mm*1
1,990
2,410
1,400
15,930 2,990
3,145
3,255
3,215
1,980
With the side steps on the both sides : 3,340
1,990
Crawler
Weight: 14,500 kg
1,235
2,095
1,980
1,980
Gantry
Weight: 2,090 kg
Weight: 1,540 kg
9,270 1,980
5,745
2,790
1,980
800
860
Jib Top (Fixed Jib) Jib Base (Fixed Jib) Tower Jib Top Tower Jib Base
Weight: 315 kg Weight: 210 kg Weight: 900 kg Weight: 1,200 kg
1,355 8,150
1,030
1,020
1,020
2,020
1,530
1,365
840
840
5,040 4,760
1,365
6,395
3.0 m Jib Insert (Tower Jib) 6.0 m Jib Insert (Tower Jib) 9.0 m Jib Insert (Tower Jib) 3.0 m (3.0A) Special Tower Jib Insert
Weight: 210 kg Weight: 360 kg Weight: 510 kg (Special Boom Insert)
Weight: 230 kg
3,145 1,355 6,195 1,355 9,240 1,355
3,145
1,365
1,365
1,365
1,530
1,365
1,365
1,365
3.0 m Jib Insert (Fixed Jib) 6.1 m Jib Insert (Fixed Jib) Jib Strut (Tower Jib) Crane Jib Strut
Weight: 110 kg Weight: 190 kg Weight: 1,355 kg Weight: 300 kg
5,925
620 1,040
840 1,020
840 1,020
2,065
950
915
43
Tower Cap Crane Backstop Backstop (for Tower)
Weight: 1,780 kg Weight: 210 kg / 1 piece Weight: 420 kg / 1 piece
2,065
Φ140
235
210 Φ115
Upper Spreader (for Crane) Lower Spreader (for Crane) Upper Spreader (for Tower) Lower Spreader (for Tower)
Weight: 485 kg Weight: 315 kg Weight: 310 kg Weight: 410 kg
1,070
930
1,170
Counterweight (1) Counterweight (2) Counterweight (3) Counterweight (L) Counterweight (R)
Weight: 9,800 kg Weight: 9,610 kg Weight: 9,700 kg (4) (6) (8) (4L) (5L) (6L) (5) (7) (9) (4R) (5R) (6R)
Weight: 4,000 kg Weight: 4,000 kg
1,455
1,455
1,455
1,820 525 525 1,820
1,455
1,430
940
530
530
5,000 5,000
5,000
1,135
1,200
1,425
1,825
1,575
1,930
Translifter
Weight: 1,220 kg / 4 pieces
975
1,125 230
Note: Estimated weights may vary ± 2%.
44
Note: This catalog may contain photographs of machines with specifications, attachments and optional equipment not certified for operation in your
country. Please consult KOBELCO for those items you may require. Due to our policy of continual product improvements all designs and
specifications are subject to change without advance notice.
Copyright by KOBELCO CRANES CO., LTD. No part of this catalog may be reproduced in any manner without notice.
Inquiries To :
17-1, Higashigotanda 2-chome, Shinagawa-ku,Tokyo 141-8626 JAPAN
Tel: +81-3-5789-2130 Fax: +81-3-5789-3372
URL: http://www.kobelco-cranes.com/
KOBELCO is the corporate mark used by Kobe Steel on a variety of products Bulletin No. 7120S-SPEC-NR2 120301F Printed in Japan
and in the names of a number of Kobe Steel Group companies.