Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
GPS+GPRS+OBD
Thank you for purchasing the GPS tracker. This manual shows how to
operate the device smoothly and correctly. Make sure to read this manual
carefully before using this product. Please note that specification and
information are subject to changes without prior notice in this manual. Any
change will be integrated in the latest release. The manufacturer assumes
1. Technical parameter
1).GSM:850/900/1800/1900 Quad band
3).Working Voltage:9-50V DC
Warm start≈32s
8).Working temperature:-20℃~+70℃
9).Working humidity:20%~80%RH
10).Measurement:71(L)×49(W)×24(H)mm
2. SUMMARY
3.1Connect DC 9-24V power supply and the red LED will light
continuously.
3.2The green LED glistens when searching the GPS signals. When GPS
GPS LED not fixed, long bright. Positioning flashes(0.2 sec/2 sec);
4.Installation
Insert the SIM card into the SIM card
Connect the device to the 9-40Vpower supply.(the red LED constant glow)
The SIM card must be with GPRS function and enough deposit. If your SIM card
need input PIN when power on, please cancel it.,It is sim card of 2G GSM
network
5.User Settings
1) CENTER
Text
Parameter Sample
command
factory settings
Command 3) SIM must display the income call number to control oil and
Description power.
CENTER,D
Command
Successful Setting:Add admin account 1 OK!
Feedback
2) Authorized number set
Text
Parameter Sample
command
D11# D11#
Authorized
D12# D12#
Del
D13# D13#
Command
Successful Setting:Add Authorization account 1 OK!
Feedback
3) where
Text
Parameter Sample
command
Command
Check the location link of Google map
Description
Feedback http://maps.google.com/maps?q=N22.540885,E113.95265
vibration alarm)
Set into
1) V123#2#
vibration alarm V123#2#
2) V123#1#
time
Cancel
456# 456#
vibration alarm
Command
set vibration alarm level,OK!
Feedback
5) SPEEDING
Text
Parameter Sample
command
n texting.
Command
Successful Setting:set speeding alarm,OK!
Feedback
Platform real time tracking,if you need use this function ,pls contact
APN#username#p 1:APN#intenet#123#123#
APN Setting
assword] 2:APN#wap#
Command
Successful Setting:SET APN OK!
Feedback
2) Set ip,port of SERVER
Parameter Sample
SERVER
803#SERVER # port# 803#58.61.154.247#7018#
Parameter
Command
Successful Setting:set IP OK!
Feedback
Text
Parameter Sample
command
WHERE 988# 988#
Command
Reply with longitude and altitude, speed and IMEL.
Feedback
4) TIMER
TIMEER
setting
Description uploading;
10~60,means time interval ; the default value is 15
seconds!
Command
Successful Setting:SET TIMER OK!
Feedback
5) GMT
Text
Parameter Sample
command
801#location,
GMT 801#E8#
time#
Command The default time zone is Beijing time. If time zone need
Command
Successful Setting:Set time zone ok!
Feedback
6) rebooting
Text
Parameter Sample
command
Command
Command
Successful Setting:Reset system, ok!
Feedback
7) FACTORY set
Command
Successful Setting:FACTORY OK!
Feedback
8) PARAM
Text
Parameter Sample
command
Description parameter.
IMEI:351190012535936
APN : cmnet
LANG: language(CN/EN)
9) STATUS
Text
Parameter Sample
command
GSM Signal:HIGH/MIDDLE/LOW
Command
GPS:FIXED/UNFIXED
Feedback
Vibrate Warning:ON/OFF
Pause:ON/OFF
signal