Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
SIMPLICITY AT ITS
MOST EFFICIENT
Looking for a circulator pump that will get the job done? Look no further. Combining cost-efficiency
with simplicity and reliability, MAGNA1 offers the ideal solution.
In short, MAGNA1 is a simple, energy-efficient circulator pump. Built on tried and tested MAGNA
technology, it offers a cost-efficient solution for jobs in which simple control and monitoring features
are sufficient. Compared to the previous edition, MAGNA1 offers improved technology as well as
unmatched levels of energy-efficiency, reliability and user-friendliness
– strengthening its position as one of the best circulators for simple solutions.
COST-EFFICIENT
A simple and energy-
efficient circulator
INPUT/OUTPUT
Integration with simple
building management
systems
ENERGY-EFFICIENT
Best-in-class efficiency for TWIN PUMP
replacement pumps FUNCTIONALITY
EASY Wireless, alternating
INSTALLATION twin pumps for
improved reliability
Easy to install and
commission with just
one button
GRUNDFOS MAGNA1 MODEL C 3
NEW INPUT/OUTPUT
TO INCREASE COMFORT
With the digital input and fault-relay output,
MAGNA1 can easily be connected to external
controllers or remote management systems.
Controlling and monitoring pumps remotely
will decrease downtime and increase comfort.
COMMISSIONING
BY THE PUSH OF A BUTTON
MAGNA1 was built with simplicity in mind – something that’s evident in the pump’s user interface,
where the pump can be commissioned by means of just one button. This is also a direct advantage
when replacing older 3-speed circulators of the same size.
MAGNA1 has nine predefined control functions, The Grundfos Eye is your way of understanding
which makes it easy to select the optimum one for your pump’s status. It gives you a perfect and fast
the application at hand. There are three proportional pump performance status, which comes in handy
pressure curves, three constant pressure curves and when performing normal operation inspection and
three constant speeds. The pump is factory set to run troubleshooting scenarios in a boiler room.
BEST-IN-CLASS BEST
in class
EFFICIENCY
0.20
Based on familiar MAGNA technology, MAGNA1 offers an unprecedented level
of energy-efficiency with an EEI of ≤ 0.20 for single pumps – bringing significant
energy savings and reducing operational costs compared to similar pumps.
Additionally, its high efficiency makes it a perfect replacement pump for pumps
that are older or broken.
GRUNDFOS GO
COMPATIBILITY
FREE TO DOWNLOAD
AND EASY TO PAIR
MAGNA1 also offers Grundfos GO compatibility. Simply pair the
app with MAGNA1 via direct infrared for single pumps and via
radio for twin pumps. Grundfos GO can be downloaded for free
from both AppStore and GooglePlay.
EASY TROUBLESHOOTING
If a pump issues a problem, you can connect the pump to
Grundfos GO and get a description of the alarm or warning
in question. You can also generate pump reports for your
customer.
6 GRUNDFOS MAGNA1 MODEL C
GOING WIRELESS:
TWIN PUMP FUNCTIONALITY
One of the features of MAGNA1 is its twin pump functionality, in which both pumps alternate to
share the pump load over time. That way, one is redundant, and can take over if the other is not able
to perform. Both pumps can handle the full flow individually – ensuring a security of supply. The
two pump heads communicate wirelessly and can reach flow levels of up to 70m3/h.
The alternating function is specifically implemented in twin products, in which two heads share
the same pump housing, thereby optimising installation costs. The function is factory-enabled, but
it can easily be switched off by pressing the button on the user interface of one of the pumps for 5
seconds. In order to prevent wear on the output relay of the external controller, it is recommended
that you use the digital input to remotely control the pump heads.
PERFORMANCE RANGE
Our MAGNA1 product range offers solutions for any duty points – ensuring that you can get
the exact performance you’re looking for.
PRODUCT RANGE
Our MAGNA1 range offers more than 200 different single and twin pumps in cast iron and stain-
less steel. It can reach a maximum head of 18m and a maximum flow of 70m3/h. Furthermore,
all single variants are available for PN16.
18 Cast iron
Stainless steel
15
40-180 40-180 50-180 50-180
12
40-150 40-150 50-150 50-150 65-150 65-150
10 25-120 25-120 32-120 32-120 32-120 32-120 40-120 40-120 50-120 50-120 65-120 65-120 80-120 100-120
8 25-100 25-100 32-100 32-100 32-100 32-100 40-100 40-100 50-100 50-100 65-100 65-100 80-100 100-100
25-80 25-80 32-80 32-80 32-80 32-80 40-80 40-80 50-80 50-80 65-80 65-80 80-80 100-80
6
25-60 25-60 32-60 32-60 32-60 32-60 40-60 40-60 50-60 50-60 65-60 65-60 80-60 100-60
4
25-40 25-40 32-40 32-40 32-40 32-40 40-40 40-40 65-40 65-40 100-40
0
G1½ G2 DN32 DN40 DN50 DN65 DN80 DN100
CUSTOMER ADVANTAGES AND BENEFITS
Characteristics Installer benefits User benefits Consultant benefits
Broad portfolio for
No need for extensive No need to replace other The tailored portfolio
backwards compatibility
search for circulators that fit elements or modify pipes ensures that there’s always a
with older Grundfos
existing dimensions. ahead of installation. MAGNA1 available.
products.
The name Grundfos, the Grundfos logo, and be think innovate are registered trademarks owned by Grundfos Holding A/S or Grundfos A/S, Denmark. All rights reserved worldwide.
need for external control.
Efficient monitoring and Easy access to basic pump Easy access to digital fault-
Basic connection via
troubleshooting as well as status when in proximity of finding reports without
Grundfos GO.
the ability to share reports. the pump. being on-site.
Best-in-class efficiency of EEI Current legislation is met in Energy consumption and Supports project regulations
≤ 0.20 on single pumps and terms of the best-in-class operational costs are focusing on “nearly zero
≤ 0.23 on twin pumps. technology. reduced. impact buildings”.
Insulation shell for single Reduces energy Supports the general trend
Easy and quick installation
pumps for an easier and consumption and saves in terms of more efficient
as the shell is fit for purpose.
faster installation. money on the heating bill. installations.