Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
TestGuide4U (ExamGuidesForIT)
Check Out Our Site at:
www.e-junkie.com\TestGuide4u
More Exams Can be Purchased through Credit Cards or Paypal Online
Directly.
Download link will be sent to your email immediately after the purchase.
HP
Exam HPE0-J74
Version: 9.0
Q1
Which file sharing protocols are available in network-attached storage (NAS)? (Select two.)
A. ZFS
B. SMB
C. iSCSI
D. FCIP
E. NFS
Answer: B,E
Q2
A company is planning to implement a backup and archiving solution. They have the
following requirements:
Answer: D,E
Q3
A customer wants to learn more about the HPE backup solution that you recently
proposed. Which resource will help show its value?
A. HPE ActiveAnswers
B. HPE Smart Portal
C. HPE SPOCK
D. HPE Virtual Resource Portal
Answer: D
Q4
You are meeting with a small SMB customer to discuss the requirements of a new storage
solution The customer tells you that they require a new consolidated platform to provide file
storage with built-in deduplication for no more than 20 Microsoft Windows users The
customer has limited Budget and IT skills.
A. HPE StoreOnce
B. HPE StoreVirtual
C. HPE StoreServ
D. HPE StoreEasy
Answer: D
Q5
Answer: C,D
Q6
What are hardware components of a Fibre Channel SAN fabric implementation? (Select
two.)
A. server
B. enclosure
C. SFP+ transceivers
D. host bus adapter
E. array controller
Answer: C,D
Q7
A. backplane
B. expander
C. initiator
D. target
Answer: A
Q8
Which task can you perform using the HPE Server Smart Update tool?
Answer: B
Q9
Answer: D
Q10
A customer requests phone home support for the company's HPE StoreVirtual storage
platform Which HPE tool should you recommend?
Answer: C
Q11
Match the toots and resources with the features they provide.
Answer:
Explanation:
VisioCafe = 4
HPE SAN Design Reference Guide = 1
HPE Storage Sizing Tool = 3
HPE Single Point of Connectivity Knowledge = 2
Q12
Which HPE storage products are part of the HPE BURA solution? (Select two.)
A. HPE StoreOnce
B. HPE StoreEver
C. HPE StoreVirtual
D. HPE StoreEasy
E. HPE StoreServ
Answer: A,B
Q13
What are benefits of the HPE StoreServ 3PAR architecture? (Select two.)
Answer: A,C
Q14
Which benefits are enabled by using the HPE StoreVirtual DSM for Microsoft MPIO?
{Select two.)
Answer: B,D
Q15
You are reviewing an HPE 3PAR solution with a customer who is very interested in space
optimization. What is important emphasize during the presentation?
Answer: D
Q16
Which back up strategy requires only one backup set to completely restore a system?
A. differential backup
B. full backup
C. incremental backup
D. working set backup
Answer: B
Q17
Which HPE management tool provides a single integrated management environment with
powerful search capabilities and an open architecture?
Answer: C
Q18
When choosing a SAN fabric topology, which components can have the largest effect on
data availability? (Select two.)
A. SFP speed
B. number of ISLs between the switches
C. switch firmware version
D. number of switches
E. power supply quantity
Answer: B,D
Explanation:
https://h20565.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=406734&docId=emr_na-
c01682663&docLocale=en_US
Q19
They suffer a catastrophic failure on Thursday at 05.30. Which backup sets are required to
restore the the failed system to the most recent state?
Answer: A
Q20
You are designing your customers HPE B-series SAN infrastructure upgrade and you want
to ensure compatibility between SAN switch firmwares. Which command can you ask them
to run lo provide you with this information?
A. alishow
B. version
C. switchversion
D. switchshow
Answer: D
Q21
A. cost efficiency
B. ease of scalability over time
C. large number of available switch ports
D. multiple paths for internal fabric resiliency
Answer: B
Q22
Answer: C
Q23
Which toot should you use to prepare a configuration and quotation for an HPE 3PAR
StoreServ, based on your customer's sizing details?
Answer: D
Q24
What is the term for the maximum allowable period for a business to be without a specific
application should a disaster occur?
Answer: A
Q25
Which key feature of the HPE StoreVirtual arrays lets customers asynchronously replicate
thin-provisioned, reservation-less snapshots between primary and remote locations?
A. space reclamation
B. Peer Motion on LeftHand storage
C. LeftHand Networks Remote Copy
D. adaptive optimization
Answer: C
Explanation: http://www8.hp.com/h20195/v2/GetPDF.aspx%2F4AA4-4220ENW.pdf
Q26
Which deduplication implementation method can be used with HPE StoreOnce when your
customer has limited network bandwith?
A. Client Side
B. Device Side
C. Target Side
D. Server Side
Answer: A
Q27
Which tool allows you to size and provide general performance metrics for HPE 3PAR
StoreServ?
Answer: A
Q28
Which devices are normally found in SAS storage interconnects between a server and
storage? (Select two.)
A. target
B. TCP/IP
C. SFP transceiver
D. initiator
E. gateway
Answer: A,D
Q29
A customer has the following requirements for a new storage solution for the company's 4-
node HPE ProLiant DL380 Gen9 SQL Cluster:
Answer: B
Q30
A customer needs direct attached storage that can provide relatively large storage
capacities at low cost me environment workload will be nigh read/low write.
Answer: A
Q31
A customer wants to replace existing EVA storage. You propose an HPE 3PAR StoreServ
and want to ensure that your design meets the customer's current IOPS requirement.
Which resources or tools are required to size a solution based on the existing
infrastructure? (Select two.)
Answer: B,D
Q32
A customer requested a new storage solution and you have already sized and designed a
new HPE 3PAR StoreServ system. Which tool will help you configure and provide a
budgetary quote?
Answer: A
Q33
Considering the HPE Converged Storage strategy, match the appropriate product to is best
use case.
Answer:
Q34
What are disadvantages of using Fibre Channel Arbitrated Loop (FC-AL) rather than fabric
Channel switched Loop (FC-SW) topology? (Select two.)
Answer: B,E
Q35
Which transport protocol does the Virtual Connect FlexFabric 20/40 F8 supports?
A. RoCE
B. FCOE
C. ROMA
D. FCIP
Answer: B
Q36
Answer: A,C
Explanation:
Q37
What is the primary benefit of the HPE StoreVirtual Network RAID technology?
A. It removes a single point of failure by using ASIC-based replication.
B. It provides asynchronous replication to improve the overall I/O performance of the
storage cluster.
C. It removes a single point of failure by striping and making a redundant copy of data
across a storage cluster.
D. It provides built-in synchronous data protection with automated failover and data access
failback.
Answer: C
Q38
A large SMB customer requests a storage solution in which downtime is not an option.
What is the requirement?
Answer: C
Q39
Answer: B,D
Q40
Which types of data can be combined together for HPE Converged Storage. (Select three.)
A. structured
B. block
C. metadata
D. object
E. file
F. unstructured
Answer: B,D,E
Q41
A. switch
B. router
C. bridge
D. gateway
Answer: D
Q42
Which HPE StoreVirtual features enable substantially increased efficiency? (Select two.)
A. space reclamation
B. iSCSI storage clustering
C. storage federation
D. reservation-less thin provisioning
E. network RAID
Answer: A,D
Q43
Answer: B
Q44
Answer: A
Explanation: With a modern, scale-out architecture that is designed to meet these new
demands, HPE 3PAR StoreServ Storage is the only primary storage platform you need to
support multi-tenant, high availability, flash-optimized performance, and the efficiency and
agility demanded by Tier-1 storage in the modern data center.
Q45
A. TCP
B. FCIP
C. Ethernet
D. Token Ring
Answer: B
Q46
You are designing a small, direct attach storage solution for an existing HPE Proliant
Server with HPE Smart Array Controllers Your customer asks you to provide full
redundancy with no single point of failure.
Q47
Your customer wants to implement an HPE 3PAR StoreServ Array to a 24x7 production
environment They want to an dynamic load balancing for the Virtual connect uplinks.
Which feature must be enabled on the Virtual Connect interfaces and the HPE B-senes
SAN Switches to accomplish this?
A. NPIV
B. ISL
C. FCOE
D. FCIP
Answer: B
Q48
Your customer is considering moving their storage from HPE ProLiant Servers with direct
attached HPE D3700 storage shelves, to HPE StoreVirtual VSA. You want to demonstrate
the management console to the customer.
A. CMC
B. SMU
C. SSMC
D. IMC
Answer: A
Q49
A. iSCSI initiator
B. iSCSI expander
C. iSCSI array
D. iSCSI target
Answer: D
Q50
Which element of HPE's BURA storage portfolio provides deduplicated backup disk
storage?
Answer: C
Q51
Which HPE tool provides a mix of validated storage configurations, guidelines, and
suggestions on a variety of HPE storage solutions?
Answer: B
Q52
Which Fibre Channel SAN topology supports automatic path rerouting it all ISLs between
two switches fail?
A. Flat SAN
B. single cote-edge
C. cascade
D. mesh
Answer: D
Q53
Which RAID level uses double distributed parity?
A. 1
B. 3
C. 5
D. 6
Answer: D
Q54
Which HPE 3PAR StoreServ capacity based license should you recommend to a customer
who needs converged storage?
Answer: A
Q55
You need to document the deduplication ratio and capacity management of a federated
deduplication environment using HPE StoreOnce solutions in a company's headquarters
and branch offices. Which HPE management tool should you use?
Answer: B
Explanation: http://www8.hp.com/us/en/products/disk-backup/product-
detail.html?oid=5196525
Q56
Match each storage management application with the appropriate HPE storage solution.
Answer:
Q57
Your customer's data centers are interconnected with 16 km long dark fiber. Which type of
8 Gb fiber optic modules (SFPs) are required to connect the FC SAN switch ISL links?
Answer: B
Q58
A. HPE StoreOnce
B. HPE StoreVirtual
C. HPE StoreEver
D. HPE StoreEasy
E. HPE StoreServ
Answer: B,E
Q59
Which HPE Storage product uses deduplication technology designed by HPE Labs?
A. HPE MSA
B. HPE storeOnce
C. HPE StoreEasy
D. HPE StoreEver
Answer: B
Explanation: Deduplicate at the application source, at the backup server or at the target
appliance. Using StoreOnce, deduplicate where it makes sense for your business, unlike
with other technology vendors where their limitations mandate.
Save time and money using your backup application to control backup data copies
movement between StoreOnce Catalyst using a single console that enables different
retention times for different copies.
Utilize cost-effective, low-bandwidth links with deduplication optimized copies. Move data
concurrently from the StoreOnce VSA in small and remote sites and/or backup over the
WAN to one or more regional offices or data centers.
Q60
According to best practices, what provides the most usable capacity for an HPE 3PAR
StoreServ SSD CPG with eight disks?
Answer: A
Q61
A customer is experiencing rapid data growth and requires more backup data to be
available online. Which technology could benefit the customer?
A. deduplication
B. wide striping
C. snapshots
D. tiering
Answer: A
Q62
A customer requests 3 new storage solution The RTO Is measured in days. Which
cost effective recovery option meet this requirements?
Answer: C
Q63
Answer: D
Q64
What connects Fibre Channel SAN switches to form a scalable SAN Fabric?
A. ISL
B. NPIV
C. FCoE
D. FSPF
Answer: A
Q65
Which information is exchanged in the FLOGI sequence between a FlexFabric module and
a SAN switch?
A. WWN
B. port ID
C. FCID
D. MAC
Answer: C
Q66
Which entry-level SAN switch should you recommend to meet these requirements?
Answer: C
Q67
You are using HPE Library and Tape Tools to document serial number and firmware
versions of your customers tape infrastructure. What do you use to perform this?
A. diagnostics option
B. device into option
C. support ticket option
D. failure analysis option
Answer: B
Explanation: http://www8.hp.com/us/en/products/storage-software/product-
detail.html?oid=406729
Q68
Which HPE direct attach storage product offers an archiving platform for HPE
ProLiant c-Class servers?
A. HPE StoreAll
B. HPE Ultrium Tape Blades
C. HPE MSA
D. HPE StoreOnce Backup
Answer: A
Q69
Answer: C
Q70
You are configuring an HPE StoreEasy for first use. Which software automates RAID array
and disk creation?
Q71
A. Oracle
B. MySQL
C. Hyper-V
D. Microsoft SQL
E. Postgres
Answer: C,D
Q72
A customer wants to use an HPE StoreEasy 3000 to host a SQL Server database. How
can MS-SQL be configured to use an SMB share rather than local storage?
A. Configure the default database locations using UNC paths (\server\share) instead of a
local drive (D:)
B. Combine throughput of all network adapters and cluster nodes together.
C. Set up a new HPE StoreEasy 3000 to create a Microsoft SQL Cluster.
D. Configure NP1V in the local network adapters to reach the SMB Share.
Answer: A
Q73
A customer is opening a new remote office They have servers containing internal storage
that they plan to virtualize They currently own existing HPE Data Protector licenses Which
data protection solution would be ideal for them?
Q74
Match the switch solution to the appropriate management tool to document an existing
SAN switch environment.
Answer:
Which storage connectivity is commonly used between the Smart Array controller and
physical disk drive?
A. FC-AL
B. FCOE
C. iSCSI
D. SAS
Answer: D
Q76
Match the SAN fabric topology with the appropriate description of how interconnected
switches are arranged in that fabric.
Answer:
Explanation:
C:\Documents and Settings\usernwz1\Desktop\1.JPG
Q77
Answer: A,C
Q78
Which software is used to assign or zone D6000 drive bays directly to an HPE
BladeSystem server bay?
Answer: A
Explanation: http://www8.hp.com/h20195/v2/GetPDF.aspx/c04111505.pdf
Q79
Which component performs the iSCSI encapsulation process in an iSCSI SAN environment
when not using a TCP/IP Offload Engine (TOE) card?
A. network switch
B. software initiator
C. network interface card
D. GBIC
Answer: B
Q80
A customer needs to be able to manually map out preferred paths within a fabric, based on
application, priority, and topology, while allowing failover to a non-preferred path if the
preferred path fails.
Which SN3000B feature should you recommend to the customer to provide this
functionality?
A. frame filtering
B. advanced zoning
C. quality of service
D. traffic isolation zones
Answer: D
Explanation: http://www8.hp.com/h20195/v2/getpdf.aspx/c04111465.pdf?ver=1 d
Q81
A. Dual-path SAS implementations make it possible to tolerate host bus adapter (HIBA)
failure.
B. Dual-domain SAS implementations provide some lower cost solutions that cover cable
failure.
C. Dual-path SAS implementations provide full redundancy of a SAS solution.
D. Dual-domain SAS implementations make it possible to tolerate host bus adapter (HBA)
failure.
Answer: D
Explanation: Dual-domain SAS implementations make it possible to tolerate host bus
adapter (HBA) failure, external cable failure, expander failure, failure in a spanned disk
Q82
A customer has a Windows 2012 SQL Cluster running on HIT StoreEasy 1450 storage and
wants to ensure that combined throughput of all network adapters is used on all cluster
nodes together.
Which HPE StoreEasy system feature helps the customer meet this requirement?
A. Smart Pathing
B. Windows Native MPIO
C. NLB Teaming
D. SMB Multichannel
Answer: D
Q83
Answer: D
Q84
For single files, what is a benefit of using a disk-to-disk backup solution versus a backup-
to-tape solution?
A. lower cost
B. transportability
C. increased capacity
D. Taster restore
Answer: D
Q85
A. scale-out storage
B. SAN. NAS and object storage
C. file level storage
D. scale-up storage
Answer: A
Explanation: https://www.hpe.com/us/en/storage/storevirtual.html
Q86
A customer has a Business objective of reducing OPEX costs because their current data
center has High operating t and overhead. Additionally, their infrastructure has poor
utilization availability, and performance. You are proposing they move to a hyper-
converged solution.
What will this provide to help to meet the customer's objective? (Select two.)
A. segregated infrastructure
B. autonomic management
C. optimization for virtualization
D. homogeneous interoperability
E. simplified management
Answer: C,E
Q87
A. HPE StoreVirtual
B. HPE XP
C. HPE StoreServ
D. HPE MSA
Answer: A
Q88
A. 1
B. 3
C. 5
D. 6
Answer: B
Q89
You are presenting your storage solution design to the decision maker of a small SMB.
What should you emphasize in your presentation?
Answer: C
Q90
You need to document and performance tune a customer's storage infrastructure with an
environment that covers the full HPE portfolio. Which management tool can be used to
identify backup bottlenecks in the customer's environment?
A. HPE Navigator
B. HPE SAN Visibility
C. HPE Data Protector Reporter
D. HPE NinjaSTARS
Answer: C
Q91
A customer wants to enable a long distance (~50km/31miles) replication for their Fibre
Channel-Based enterprise storage solution. Because of budget restrictions, they want a
low-cost solution that supports replication.
Q92
Your customer requested a Network Attached Storage (NAS) solution that allows Microsoft
Windows users to continue working uninterrupted during hardware failures Which
HPEStore Easy functionality supports transparent failover?
A. SMB V3
B. InstantOn
C. Data Guarding
D. Peer Motion
Answer: A
Q93
Which HPE primary production storage solution is targeted to the small and mid-sized
business markets?
A. HPE StoreVirtual
B. HPE StoreAll
C. HPE StoreOnce
D. HPE StoreEver
Answer: A
Q94
Which RAID level uses double parity Advanced Data Guarding?
A. 1
B. 5
C. 6
D. 10
Answer: C
Explanation: DEFINITION double-parity RAID Sponsored News Scale-out Storage and
Falling Flash Prices -SolidFire Why HC Lets You Rest Easy with Better Resiliency and
Data Protection -SimpliVity See More Vendor Resources RAID 50 Interleave White Paper
-Xtore Storage Magazine: Storage Management for a Virtual World -IBM Double-parity
RAID (redundant array of independent disks), also called diagonal-parity RAID, Advanced
Data Guarding (RAID_ADG), or RAID-6, is a method of protecting against multiple storage
drive failures by creating two sets of parity data on an array of hard disks.
Q95
Your customer has very specific performance requirements and is thinking about
purchasing a SAN and backup device. Which resource should you use as you use as you
work with your customer to design a storage infrastructure to meet your customer's needs?
Answer: C
Q96
The IT manager of a large SMB customer is requesting a new storage array with the
following features:
Answer: A
Q97
A. HPE OneView
B. HPE StoreVirtual CMC
C. HPE StoreServ Management Console
D. HPE Cloud System Management Server
Answer: B
Q98
Which HPE 3PAR StoreServ virtualization technology provides DHAM cache extension to
reduce application response time for read intensive I/O workloads?
A. Priority Optimization
B. Adaptive Flash Cache
C. Persistent Cache
D. Rapid Provisioning
Answer: B
Explanation: http://www8.hp.com/h20195/v2/getpdf.aspx/4AA5-4572ENW.pdf
Q99
Before upgrading your customers SAN fabric based on HPE B-series switches, you need
the firmware and switch-and-port status information for the current switches. Which
commands can be run to obtain this information? (Select two.)
A. showver
B. switchshow
C. version
D. fabricshow
E. showport
Answer: B,C
Q100
Answer: C
Q101
A. It stores frequently accessed files in a local cache to reduce the consumed storage
space.
B. It allows allocation of physical storage resources only after they are consumed by an
application.
C. It removes allocated. Out unused space with minimal performance impact.
D. It uses a real-time I/O engine to intelligently position data on the most appropriate tier of
storage.
Answer: C
Q102
Your customer is deploying a new application that is based on OpenStack. Which HPE
storage solution supports this deployment?
A. HPE StoreAII
B. HPE StoreVirtual VSA
C. HPE storeEasy
D. HPE StoreEver
Answer: B
Q103
How do devices in the Fibre Channel SAN fabric identify each node?
A. FC-AL
B. WWN
C. MAC
D. IQN
Answer: B
Q104
Under the HPE Converged Storage strategy, which type of primary storage is provided
through NAS solutions?
A. sequential
B. object
C. block
D. file
Answer: D
Q105
What defines the maximum tolerable amount of data loss from a service disruption?
A. RPO
B. SLO
C. SLA
D. RTO
Answer: A