Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Clone
Dual SATA HDD Docking System
MH-3621-U3 Clone Dual SATA HDD Docking System
CONTENTS
NOTE .......................................................................................................................... 8
1
MH-3621-U3 Clone Dual SATA HDD Docking System
Thank you for purchasing Dual SATA HDD Docking System MH-3621-U3 from
archgon. To ensure trouble-free use and prolong the life of your device, please
read following instructions and note all precautions.
Features –
USB 3.0 SuperSpeed transfer rate (backward compatible with USB 2.0)
Compatible with 2.5”& 3.5”SATA HDD/SSD
Enhanced Offline Clone Function
LED power/activity indicator
Plug & Play
Tool free
Specification –
Interface:SATA to USB 3.0
Material:Aluminum + Plastic
Dimension:108 x 62 x 149 mm
Weight:410 g
OS Compatibility:Windows XP or above
Mac OS 10.5 or above
2
MH-3621-U3 Clone Dual SATA HDD Docking System
Front View
Rear View
3
MH-3621-U3 Clone Dual SATA HDD Docking System
Top View
HDD 1
HDD Ejection
Jacks for HDD1
and HDD2
HDD 2
4
MH-3621-U3 Clone Dual SATA HDD Docking System
STEP2: Install either 2.5” and/or 3.5”HDD/SSD(s) to the docking system and
connect to the SATA connector(s) well.
5
MH-3621-U3 Clone Dual SATA HDD Docking System
STEP 2: Make sure power is turned on and USB cable is NOT connected.
6
MH-3621-U3 Clone Dual SATA HDD Docking System
STEP 3: Press & hold the clone button for at least 5 seconds, then clone
operation will start by indicating all 4 LEDs in orange.
STEP 4: LEDs will then proceed to flash sequentially indicating the Clone is in
progress. Each orange LED refers to every 25% of clone completion. It
is only when every 25% of HDD1 is cloned to HDD2 that such LED will
remain constantly on, leaving the other LED(s) in running stage. When
Clone operation is fully completed, all LEDs will flash regularly in
orange.
NOTICE: Any time clone operation fails, LED on HDD2 flares in red, leaving the other
LEDs off. Refer to Section 4.4 & 4.5 in “Normal & Clone Mode Table Chart”
under “Diagnosis of LED” in below “NOTE” session for details.
7
MH-3621-U3 Clone Dual SATA HDD Docking System
Note
Clone Function
All data on HDD2 will be deleted once clone operation starts.
The capacity of HDD2 must be equal to or greater than HDD1.
If the capacity of HDD2 is greater than HDD1, the remained capacity in HDD2 upon
clone completion can be formulated to a new partition.
HDD Support
Installing HDD(s) with more than 2TB is possible. However, make sure to run this
device under Vista® , Win7® & 8® OS and activate GPT mode when formatting this
device to have it work correctly.
The motor of hard drive will not immediately stop running after power being turned
off. Therefore, it is highly recommended that to turn off the power first and then wait
for 20 seconds before hard drive removal. It is safer operational procedure.
USB Connectivity
The equipped USB3.0 port is downward compatible with USB2.0 PC/notebook by
simply plug and play.
8
MH-3621-U3 Clone Dual SATA HDD Docking System
SATA Connectivity
This device supports HDD hot swapping. The following procedure must be fully
acknowledged before practice.
a. Hot swapping during HDD(s) operation may result in wreckage of such HDD.
(e.g. disk plate scratched, leading to HDD malfunctioning.)
b. Removing any HDD will result in re-detection of both or connected HDD by OS.
In the meantime, file transferring in progress will be forced to stop, leading to
file(s) corruption.
In conclusion, to prevent the above damage, it is strongly recommended that the
device must be power off and HDD(s) have come to a full stop before removing.
Diagnosis of LEDs
This device consists of 4 LEDs
The chart below describes LED activity under various conditions.
R: Read
W: Write
S3: PC into sleep mode
S4: PC into hibernation mode
1 Power OFF
2 Power ON ● Red
9
MH-3621-U3 Clone Dual SATA HDD Docking System
USB connected
5.1 ● ● ● Blue Blue
No HDD
Limited Warranty
Archgon warrants MH-3621-U3 is free from defects in materials or workmanship under
normal use for a period of one (1) year from the date of original purchase.
The limited warranty does not cover upon occurrence of the following events
1. Damages from misuse, accident or any man-caused damages
2. The disassembly or the re-equipping causes the damage arbitrarily.
3. Improper maintenance, leading to product failure or damage
4. Unsuitable physical or operating environment beyond product specification, leading
to product failure or damage.
10
MH-3621-U3 Clone Dual SATA HDD Docking System
內 容
關於產品 ................................................................................................................... 12
硬碟安裝說明 ........................................................................................................... 15
注意事項 ................................................................................................................... 18
有限保固 ................................................................................................................... 20
11
MH-3621-U3 Clone Dual SATA HDD Docking System
裝置的使用壽命,請您使用前詳細閱讀以下說明並留意注意事項。
關於產品
包裝內容物 –
- MH-3621-U3 雙插槽 SATA 硬碟外接座
- USB 3.0 傳輸線
- AC 電源轉接器
- 說明書
產品特色 –
USB 3.0 高速傳輸效率 (向下支援 USB 2.0)
支援 2.5 吋 & 3.5 吋 SATA 硬碟
支援硬碟 Clone 功能
LED 電源/狀態 指示燈
即插即用
免工具安裝
產品規格 –
產品介面:SATA to USB 3.0
材質:陽極鋁合金 + 塑膠
尺寸:108 x 62 x 149 mm
重量:410 g
作業系統:Windows XP 或以上
Mac OS 10.5 或以上
12
MH-3621-U3 Clone Dual SATA HDD Docking System
正面
背面
USB3.0 DC 輸入 電源開關
13
MH-3621-U3 Clone Dual SATA HDD Docking System
上面
HDD 1
14
MH-3621-U3 Clone Dual SATA HDD Docking System
硬碟安裝說明
STEP1: 確認 SATA 介面的正確位置。
15
MH-3621-U3 Clone Dual SATA HDD Docking System
Clone 操作說明
注意:
一旦 Clone 複製作業開始,所有在 HDD2 的資料將被刪除。請確認 HDD2
內無重要資料或已妥善備份。
執行 Clone 作業的硬碟組合可以是 2.5 吋或 3.5 吋硬碟,但 HDD2 的硬碟
容量(目的地硬碟)必須大於或等於 HDD1 硬碟容量(來源硬碟)。
STEP 1: 裝入至少兩顆硬碟,並確認硬碟有穩固安裝於外接座上。
16
MH-3621-U3 Clone Dual SATA HDD Docking System
17
MH-3621-U3 Clone Dual SATA HDD Docking System
注意事項
Clone 硬碟複製功能
一旦 Clone 複製作業開始,所有在 HDD2 的資料將被刪除。請確認 HDD2 內無重要
資料或已妥善備份。
執行 Clone 作業的硬碟組合可以是 2.5 吋或 3.5 吋硬碟,但 HDD2 的硬碟容量(目的
地硬碟)必須大於或等於 HDD1 硬碟容量(來源硬碟)。若 HDD2 硬碟容量大於 HDD1,
在 clone 作業完成後,剩餘的硬碟容量可格式化為一個新的磁區。
省電模式
此裝置會偵測電腦電源自動進入省電模式。當電腦關機或進入休眠狀態,硬碟會怠速
且只有 power 指示燈會亮紅燈,其他 LED 燈會熄滅。
a. 在某些作業系統,當系統進入休眠狀態時,僅有螢幕會關閉,主機板仍在運作狀
態,在這種情形下,裝置的 LED 燈並不會熄滅。
b. 為執行智慧型省電模式,請勿關閉此裝置的主要電源。
裝置使用
若裝置與電腦連接,即與一般外接座無異,硬碟作為外接式硬碟使用。若同時安裝 2
顆硬碟則視為 2 個獨立的儲存裝置。
若要執行 clone 硬碟複製作業,必需安裝兩顆硬碟。
在 clone 複製作業期間請勿移除任何硬碟,否則會造成硬碟複製作業失敗,也有可能
造成資料上的遺失。
支援硬碟
本裝置支援容量 2TB 以上之硬碟,但請確保電腦系統為 Vista®, Win7® & 8® OS 以上
且利用 GPT 模式格式化硬碟,以確保硬碟操作正常。
硬碟馬達在關閉裝置電源後並不會立即停止運作,強烈建議在關閉裝置電源後,在移
除硬碟前靜待約 20 秒,待硬碟馬達完全停止運作後再安全移除硬碟。
18
MH-3621-U3 Clone Dual SATA HDD Docking System
連接 SATA 介面
此裝置支援硬碟熱插拔,但在執行硬碟熱插拔前,請確認以下需知 –
a. 若在硬碟操作期間拔除硬碟可能會導致硬碟損壞 (例如:硬碟磁盤刮傷導致硬碟
機能失常故障)。
b. 拔除硬碟會使系統重新辨識此裝置,所以若安裝 2 顆硬碟,在其中一顆硬碟執行
任務時拔除另一顆硬碟也會導致系統重新辨識外接式裝置,會導致硬碟執行任務
強迫終止並有可能導致資料損毀。
為避免以上情形發生,強烈建議請務必確認裝置電源關閉且硬碟運作完全停止後,再
進行拔除硬碟的動作。
LED 狀態顯示
本裝置裝配 4 個 LED 燈
以下表格顯示 LED 燈在不同作業底下所顯示的狀態
R: 硬碟讀取資料
W: 硬碟寫入資料
S: 電腦進入休眠模式
19
MH-3621-U3 Clone Dual SATA HDD Docking System
硬碟複製程序
紅燈
4.4 無法開始 或 ● ● ● OFF OFF
閃爍
HDD1 > HDD2
4.5 硬碟複製失敗 ● ● ● OFF OFF 紅燈
5.1 無安裝硬碟 ● ● ● 藍燈 藍燈
藍燈
5.2 安裝 HDD1 ● ● R/W● ● ON 藍燈 藍燈
閃爍
藍燈
5.3 安裝 HDD2 ● ● R/W● ● ON 藍燈 藍燈
閃爍
藍燈 藍燈
5.4 安裝雙硬碟 ● ● R/W● R/W● ● ON ON 藍燈 藍燈
閃爍 閃爍
6 省電模式
有限保固
亞齊慷對全系列產品自原購買日起一年內(若無購買證明則以本公司產品出廠序號日期為
準),針對非人為因素所導致之故障瑕疵提供檢測維修服務。
以下情形,恕無法提供保固服務 –
a. 因濫用、意外或任何人為因素造成的產品損壞。
b. 因天災等不可抗力之因素所造成的產品損壞。
c. 因自行拆卸或改裝產品所造成的產品損壞。
d. 因不當使用、不當維護或不當保養所造成的產品損壞。
e. 超過產品容許範圍外的不良使用環境所導致的產品損壞。
f. 產品序號汙損、標籤損毀、脫落或篡改。
若您對亞齊慷產品有任何疑問,請來信 product@archgon.com
20
MH-3621-U3 Clone Dual SATA HDD Docking System
www.archgon.com
21