Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1.0 Objective:
1.1 To size the new MTBE off-spec storage using criterea PTS 16.52.09
2.1 The required storage volume as per design basis is 442 m3 to be accomodated between LAL and LAH
2.2 The inlet /outlet nozzle will be sized to according to momentum criterea as per PTS
2.3 The maximum inlet flowrate is 65 m3/hr with 10% design margin
iii) Minimum liquid residence time and minimum level control is as below [Ref. PTS 16.52.09]:
Min time, minutes
Level Min height, mm
PTS 16.52.09
LZAHH to below Inlet Device 150 -
LAH to LZAHH 100 5
LAL to LAH 350 5
LZALL to LAL 100 5
LZALL to Bottom of vessel 100 -
3.0 References
[1] PTS 16.52.09 Two Phase Gas and Liquid Separator (May 2015)
[2] Design Basis - FLARE-K710205-BED-RNZ-PCMTBE-B-DES-0001
LZAHH 4320
LAH 4220
NLL 2335
LEVEL SETTING, mm
LAL 450
LZALL 350
5.0 Attachment
[1] Horizontal 'Vessel Sizing Calculations - D-1309, MTBE Offpsec Storage Vessel