Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
b. power supply
c. start menu
d. Computer
2. We must … the “Turn Off” after we click start menu if we want to turn off a computer.
a. click
b. press
c. turn
d. Push
o Turn off your computer and unplug power cord from power outlet.
o Carefully remove the computer cover.
o Set the Master/Slave jumper on the rear panel of drive.
o (To get best results, we strongly suggest that you connect your device to the Secondary IDE
port as the MASTER device.)
o Connect the IDE cable to the drive.
o Connect the 4-pole power cable to the drive.
o Connect the audio cable (if applicable).
o Carefully slide the drive into the empty bay and mount it. Then replace the computer cover.
o Plug your computer back to power outlet and then turn the power on.
c. uninstall CD-ROM
6. What does the writer strongly recommend in order to get the best result of the CD-ROM
installation?
a. That we remove the computer cover first.
b. audio cable
c. IDE cable
d. Monitor cable
8. What part of the CD-ROM should be set if you want to apply CD-ROM as Master or
Slave?
a. Motherboard slot
b. IDE slot
c. Cable power
d. Master/Slave Jumper
a. You may not turn the computer on before connecting the cable.
b. Your CD-ROM may not work properly if you do not connect the cable.
a. CD-ROM
b. Jumper
c. Motherboard
d. Computer
11. “Carefully slide the drive into the empty bay and mount it.”
The word ‘bay’ in the sentence is similar in meaning to ….
a. Jumper
b. Cable
c. Button
d. Compartment
12. Plug your computer back to power outlet and then turn the power on.
The word ‘outlet’ in the sentence is similar in meaning to ….
a. Button
b. Channel
c. Cable
d. Port